[PATCH AUTOSEL 4.9 1/3] NET: usb: qmi_wwan: Adding support for Cinterion MV31

[PATCH AUTOSEL 4.9 1/3] NET: usb: qmi_wwan: Adding support for Cinterion MV31

[Sasha Levin]

From: Christoph Schemmel <christoph.schemmel@gmail.com>

[ Upstream commit a4dc7eee9106a9d2a6e08b442db19677aa9699c7 ]

Adding support for Cinterion MV31 with PID 0x00B7.

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b7 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion USB Mobile Broadband
S:  SerialNumber=b3246eed
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com>
Link: https://lore.kernel.org/r/20210202084523.4371-1-christoph.schemmel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 1c0aec70ee5d2..f9e57405b167b 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -949,6 +949,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x1e2d, 0x0082, 5)},	/* Cinterion PHxx,PXxx (2 RmNet) */
 	{QMI_FIXED_INTF(0x1e2d, 0x0083, 4)},	/* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/
 	{QMI_QUIRK_SET_DTR(0x1e2d, 0x00b0, 4)},	/* Cinterion CLS8 */
+	{QMI_FIXED_INTF(0x1e2d, 0x00b7, 0)},	/* Cinterion MV31 RmNet */
 	{QMI_FIXED_INTF(0x413c, 0x81a2, 8)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{QMI_FIXED_INTF(0x413c, 0x81a3, 8)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
 	{QMI_FIXED_INTF(0x413c, 0x81a4, 8)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
-- 
2.27.0

[PATCH AUTOSEL 4.9 2/3] cifs: Set CIFS_MOUNT_USE_PREFIX_PATH flag on setting cifs_sb->prepath.

[Sasha Levin]

From: Shyam Prasad N <sprasad@microsoft.com>

[ Upstream commit a738c93fb1c17e386a09304b517b1c6b2a6a5a8b ]

While debugging another issue today, Steve and I noticed that if a
subdir for a file share is already mounted on the client, any new
mount of any other subdir (or the file share root) of the same share
results in sharing the cifs superblock, which e.g. can result in
incorrect device name.

While setting prefix path for the root of a cifs_sb,
CIFS_MOUNT_USE_PREFIX_PATH flag should also be set.
Without it, prepath is not even considered in some places,
and output of "mount" and various /proc/<>/*mount* related
options can be missing part of the device name.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/connect.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index af78de9ef036c..8508dc8270593 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3488,6 +3488,7 @@ int cifs_setup_cifs_sb(struct smb_vol *pvolume_info,
 		cifs_sb->prepath = kstrdup(pvolume_info->prepath, GFP_KERNEL);
 		if (cifs_sb->prepath == NULL)
 			return -ENOMEM;
+		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_USE_PREFIX_PATH;
 	}
 
 	return 0;
-- 
2.27.0

[PATCH AUTOSEL 4.9 3/3] scripts/recordmcount.pl: support big endian for ARCH sh

[Sasha Levin]

From: Rong Chen <rong.a.chen@intel.com>

[ Upstream commit 93ca696376dd3d44b9e5eae835ffbc84772023ec ]

The kernel test robot reported the following issue:

    CC [M]  drivers/soc/litex/litex_soc_ctrl.o
  sh4-linux-objcopy: Unable to change endianness of input file(s)
  sh4-linux-ld: cannot find drivers/soc/litex/.tmp_gl_litex_soc_ctrl.o: No such file or directory
  sh4-linux-objcopy: 'drivers/soc/litex/.tmp_mx_litex_soc_ctrl.o': No such file

The problem is that the format of input file is elf32-shbig-linux, but
sh4-linux-objcopy wants to output a file which format is elf32-sh-linux:

  $ sh4-linux-objdump -d drivers/soc/litex/litex_soc_ctrl.o | grep format
  drivers/soc/litex/litex_soc_ctrl.o:     file format elf32-shbig-linux

Link: https://lkml.kernel.org/r/20210210150435.2171567-1-rong.a.chen@intel.com
Link: https://lore.kernel.org/linux-mm/202101261118.GbbYSlHu-lkp@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/recordmcount.pl | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index faac4b10d8eaf..fb0d25ced2fb3 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -261,7 +261,11 @@ if ($arch eq "x86_64") {
 
     # force flags for this arch
     $ld .= " -m shlelf_linux";
-    $objcopy .= " -O elf32-sh-linux";
+    if ($endian eq "big") {
+        $objcopy .= " -O elf32-shbig-linux";
+    } else {
+        $objcopy .= " -O elf32-sh-linux";
+    }
 
 } elsif ($arch eq "powerpc") {
     $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
-- 
2.27.0