* [PATCH] can: c_can: move runtime PM enable/disable to c_can_platform
@ 2021-03-01 4:15 Tong Zhang
2021-03-01 15:08 ` Marc Kleine-Budde
0 siblings, 1 reply; 6+ messages in thread
From: Tong Zhang @ 2021-03-01 4:15 UTC (permalink / raw)
To: Wolfgang Grandegger, Marc Kleine-Budde, David S. Miller,
Jakub Kicinski, Vincent Mailhol, Oliver Hartkopp, Tong Zhang,
YueHaibing, Zhang Qilong, linux-can, netdev, linux-kernel
Currently doing modprobe c_can_pci will make kernel complain
"Unbalanced pm_runtime_enable!", this is caused by pm_runtime_enable()
called before pm is initialized in register_candev() and doing so will
also cause it to enable twice.
This fix is similar to 227619c3ff7c, move those pm_enable/disable code to
c_can_platform.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
---
drivers/net/can/c_can/c_can.c | 26 ++------------------------
drivers/net/can/c_can/c_can_platform.c | 6 +++++-
2 files changed, 7 insertions(+), 25 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index ef474bae47a1..04f783b3d9d3 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -212,18 +212,6 @@ static const struct can_bittiming_const c_can_bittiming_const = {
.brp_inc = 1,
};
-static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv)
-{
- if (priv->device)
- pm_runtime_enable(priv->device);
-}
-
-static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv)
-{
- if (priv->device)
- pm_runtime_disable(priv->device);
-}
-
static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv)
{
if (priv->device)
@@ -1335,7 +1323,6 @@ static const struct net_device_ops c_can_netdev_ops = {
int register_c_can_dev(struct net_device *dev)
{
- struct c_can_priv *priv = netdev_priv(dev);
int err;
/* Deactivate pins to prevent DRA7 DCAN IP from being
@@ -1345,28 +1332,19 @@ int register_c_can_dev(struct net_device *dev)
*/
pinctrl_pm_select_sleep_state(dev->dev.parent);
- c_can_pm_runtime_enable(priv);
-
dev->flags |= IFF_ECHO; /* we support local echo */
dev->netdev_ops = &c_can_netdev_ops;
err = register_candev(dev);
- if (err)
- c_can_pm_runtime_disable(priv);
- else
- devm_can_led_init(dev);
-
+ if (!err)
+ devm_can_led_init(dev);
return err;
}
EXPORT_SYMBOL_GPL(register_c_can_dev);
void unregister_c_can_dev(struct net_device *dev)
{
- struct c_can_priv *priv = netdev_priv(dev);
-
unregister_candev(dev);
-
- c_can_pm_runtime_disable(priv);
}
EXPORT_SYMBOL_GPL(unregister_c_can_dev);
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 05f425ceb53a..47b251b1607c 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -29,6 +29,7 @@
#include <linux/list.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -386,6 +387,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
+ pm_runtime_enable(priv->device);
ret = register_c_can_dev(dev);
if (ret) {
dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
@@ -398,6 +400,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
return 0;
exit_free_device:
+ pm_runtime_disable(priv->device);
free_c_can_dev(dev);
exit:
dev_err(&pdev->dev, "probe failed\n");
@@ -408,9 +411,10 @@ static int c_can_plat_probe(struct platform_device *pdev)
static int c_can_plat_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
+ struct c_can_priv *priv = netdev_priv(dev);
unregister_c_can_dev(dev);
-
+ pm_runtime_disable(priv->device);
free_c_can_dev(dev);
return 0;
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] can: c_can: move runtime PM enable/disable to c_can_platform
2021-03-01 4:15 [PATCH] can: c_can: move runtime PM enable/disable to c_can_platform Tong Zhang
@ 2021-03-01 15:08 ` Marc Kleine-Budde
2021-03-02 2:55 ` [PATCH v2] " Tong Zhang
2021-03-02 2:55 ` [PATCH] " Tong Zhang
0 siblings, 2 replies; 6+ messages in thread
From: Marc Kleine-Budde @ 2021-03-01 15:08 UTC (permalink / raw)
To: Tong Zhang
Cc: Wolfgang Grandegger, David S. Miller, Jakub Kicinski,
Vincent Mailhol, Oliver Hartkopp, YueHaibing, Zhang Qilong,
linux-can, netdev, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2776 bytes --]
On 28.02.2021 23:15:48, Tong Zhang wrote:
> Currently doing modprobe c_can_pci will make kernel complain
> "Unbalanced pm_runtime_enable!", this is caused by pm_runtime_enable()
> called before pm is initialized in register_candev() and doing so will
I don't see where register_candev() is doing any pm related
initialization.
> also cause it to enable twice.
> This fix is similar to 227619c3ff7c, move those pm_enable/disable code to
> c_can_platform.
As I understand 227619c3ff7c ("can: m_can: move runtime PM
enable/disable to m_can_platform"), PCI devices automatically enable PM,
when the "PCI device is added".
Please clarify the above point, otherwise the code looks OK, small
nitpick inline:
> Signed-off-by: Tong Zhang <ztong0001@gmail.com>
> ---
> drivers/net/can/c_can/c_can.c | 26 ++------------------------
> drivers/net/can/c_can/c_can_platform.c | 6 +++++-
> 2 files changed, 7 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> index ef474bae47a1..04f783b3d9d3 100644
> --- a/drivers/net/can/c_can/c_can.c
> +++ b/drivers/net/can/c_can/c_can.c
> @@ -212,18 +212,6 @@ static const struct can_bittiming_const c_can_bittiming_const = {
> .brp_inc = 1,
> };
>
> -static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv)
> -{
> - if (priv->device)
> - pm_runtime_enable(priv->device);
> -}
> -
> -static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv)
> -{
> - if (priv->device)
> - pm_runtime_disable(priv->device);
> -}
> -
> static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv)
> {
> if (priv->device)
> @@ -1335,7 +1323,6 @@ static const struct net_device_ops c_can_netdev_ops = {
>
> int register_c_can_dev(struct net_device *dev)
> {
> - struct c_can_priv *priv = netdev_priv(dev);
> int err;
>
> /* Deactivate pins to prevent DRA7 DCAN IP from being
> @@ -1345,28 +1332,19 @@ int register_c_can_dev(struct net_device *dev)
> */
> pinctrl_pm_select_sleep_state(dev->dev.parent);
>
> - c_can_pm_runtime_enable(priv);
> -
> dev->flags |= IFF_ECHO; /* we support local echo */
> dev->netdev_ops = &c_can_netdev_ops;
>
> err = register_candev(dev);
> - if (err)
> - c_can_pm_runtime_disable(priv);
> - else
> - devm_can_led_init(dev);
> -
> + if (!err)
> + devm_can_led_init(dev);
Please indent with two tabs here.
regards,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2] can: c_can: move runtime PM enable/disable to c_can_platform
2021-03-01 15:08 ` Marc Kleine-Budde
@ 2021-03-02 2:55 ` Tong Zhang
2021-03-02 7:26 ` Marc Kleine-Budde
2021-03-05 11:32 ` Uwe Kleine-König
2021-03-02 2:55 ` [PATCH] " Tong Zhang
1 sibling, 2 replies; 6+ messages in thread
From: Tong Zhang @ 2021-03-02 2:55 UTC (permalink / raw)
To: Wolfgang Grandegger, Marc Kleine-Budde, David S. Miller,
Jakub Kicinski, Vincent Mailhol, Oliver Hartkopp, Tong Zhang,
YueHaibing, Zhang Qilong, linux-can, netdev, linux-kernel
Currently doing modprobe c_can_pci will make kernel complain
"Unbalanced pm_runtime_enable!", this is caused by pm_runtime_enable()
called before pm is initialized.
This fix is similar to 227619c3ff7c, move those pm_enable/disable code to
c_can_platform.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
---
drivers/net/can/c_can/c_can.c | 24 +-----------------------
drivers/net/can/c_can/c_can_platform.c | 6 +++++-
2 files changed, 6 insertions(+), 24 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index ef474bae47a1..6958830cb983 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -212,18 +212,6 @@ static const struct can_bittiming_const c_can_bittiming_const = {
.brp_inc = 1,
};
-static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv)
-{
- if (priv->device)
- pm_runtime_enable(priv->device);
-}
-
-static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv)
-{
- if (priv->device)
- pm_runtime_disable(priv->device);
-}
-
static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv)
{
if (priv->device)
@@ -1335,7 +1323,6 @@ static const struct net_device_ops c_can_netdev_ops = {
int register_c_can_dev(struct net_device *dev)
{
- struct c_can_priv *priv = netdev_priv(dev);
int err;
/* Deactivate pins to prevent DRA7 DCAN IP from being
@@ -1345,28 +1332,19 @@ int register_c_can_dev(struct net_device *dev)
*/
pinctrl_pm_select_sleep_state(dev->dev.parent);
- c_can_pm_runtime_enable(priv);
-
dev->flags |= IFF_ECHO; /* we support local echo */
dev->netdev_ops = &c_can_netdev_ops;
err = register_candev(dev);
- if (err)
- c_can_pm_runtime_disable(priv);
- else
+ if (!err)
devm_can_led_init(dev);
-
return err;
}
EXPORT_SYMBOL_GPL(register_c_can_dev);
void unregister_c_can_dev(struct net_device *dev)
{
- struct c_can_priv *priv = netdev_priv(dev);
-
unregister_candev(dev);
-
- c_can_pm_runtime_disable(priv);
}
EXPORT_SYMBOL_GPL(unregister_c_can_dev);
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 05f425ceb53a..47b251b1607c 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -29,6 +29,7 @@
#include <linux/list.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -386,6 +387,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
+ pm_runtime_enable(priv->device);
ret = register_c_can_dev(dev);
if (ret) {
dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
@@ -398,6 +400,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
return 0;
exit_free_device:
+ pm_runtime_disable(priv->device);
free_c_can_dev(dev);
exit:
dev_err(&pdev->dev, "probe failed\n");
@@ -408,9 +411,10 @@ static int c_can_plat_probe(struct platform_device *pdev)
static int c_can_plat_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
+ struct c_can_priv *priv = netdev_priv(dev);
unregister_c_can_dev(dev);
-
+ pm_runtime_disable(priv->device);
free_c_can_dev(dev);
return 0;
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] can: c_can: move runtime PM enable/disable to c_can_platform
2021-03-01 15:08 ` Marc Kleine-Budde
2021-03-02 2:55 ` [PATCH v2] " Tong Zhang
@ 2021-03-02 2:55 ` Tong Zhang
1 sibling, 0 replies; 6+ messages in thread
From: Tong Zhang @ 2021-03-02 2:55 UTC (permalink / raw)
To: Marc Kleine-Budde
Cc: Wolfgang Grandegger, David S. Miller, Jakub Kicinski,
Vincent Mailhol, Oliver Hartkopp, YueHaibing, Zhang Qilong,
linux-can, netdev, open list
On Mon, Mar 1, 2021 at 2:49 PM Marc Kleine-Budde <mkl@pengutronix.de> wrote:
>
> On 28.02.2021 23:15:48, Tong Zhang wrote:
> > Currently doing modprobe c_can_pci will make kernel complain
> > "Unbalanced pm_runtime_enable!", this is caused by pm_runtime_enable()
> > called before pm is initialized in register_candev() and doing so will
>
> I don't see where register_candev() is doing any pm related
> initialization.
>
> > also cause it to enable twice.
>
> > This fix is similar to 227619c3ff7c, move those pm_enable/disable code to
> > c_can_platform.
>
> As I understand 227619c3ff7c ("can: m_can: move runtime PM
> enable/disable to m_can_platform"), PCI devices automatically enable PM,
> when the "PCI device is added".
Hi Marc,
Thanks for the comments. I thinks you are right -- I was mislead by the trace --
I have corrected the commit log along with the indent fix in v2 patch.
Thanks again for your help,
- Tong
>
> Please clarify the above point, otherwise the code looks OK, small
> nitpick inline:
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] can: c_can: move runtime PM enable/disable to c_can_platform
2021-03-02 2:55 ` [PATCH v2] " Tong Zhang
@ 2021-03-02 7:26 ` Marc Kleine-Budde
2021-03-05 11:32 ` Uwe Kleine-König
1 sibling, 0 replies; 6+ messages in thread
From: Marc Kleine-Budde @ 2021-03-02 7:26 UTC (permalink / raw)
To: Tong Zhang, Wolfgang Grandegger, David S. Miller, Jakub Kicinski,
Vincent Mailhol, Oliver Hartkopp, YueHaibing, Zhang Qilong,
linux-can, netdev, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 686 bytes --]
On 3/2/21 3:55 AM, Tong Zhang wrote:
> Currently doing modprobe c_can_pci will make kernel complain
> "Unbalanced pm_runtime_enable!", this is caused by pm_runtime_enable()
> called before pm is initialized.
> This fix is similar to 227619c3ff7c, move those pm_enable/disable code to
> c_can_platform.
>
> Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Applied to linux-can/testing.
Thanks,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] can: c_can: move runtime PM enable/disable to c_can_platform
2021-03-02 2:55 ` [PATCH v2] " Tong Zhang
2021-03-02 7:26 ` Marc Kleine-Budde
@ 2021-03-05 11:32 ` Uwe Kleine-König
1 sibling, 0 replies; 6+ messages in thread
From: Uwe Kleine-König @ 2021-03-05 11:32 UTC (permalink / raw)
To: Tong Zhang
Cc: Wolfgang Grandegger, Marc Kleine-Budde, David S. Miller,
Jakub Kicinski, Vincent Mailhol, Oliver Hartkopp, YueHaibing,
Zhang Qilong, linux-can, netdev, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 683 bytes --]
On Mon, Mar 01, 2021 at 09:55:40PM -0500, Tong Zhang wrote:
> Currently doing modprobe c_can_pci will make kernel complain
> "Unbalanced pm_runtime_enable!", this is caused by pm_runtime_enable()
> called before pm is initialized.
> This fix is similar to 227619c3ff7c, move those pm_enable/disable code to
> c_can_platform.
I can confirm this makes the warning go away on a Congatec Atom board. I
didn't do any further runtime tests.
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Thanks
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-03-05 11:33 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-01 4:15 [PATCH] can: c_can: move runtime PM enable/disable to c_can_platform Tong Zhang
2021-03-01 15:08 ` Marc Kleine-Budde
2021-03-02 2:55 ` [PATCH v2] " Tong Zhang
2021-03-02 7:26 ` Marc Kleine-Budde
2021-03-05 11:32 ` Uwe Kleine-König
2021-03-02 2:55 ` [PATCH] " Tong Zhang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).