[PATCH] arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x

[PATCH] arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x

[Srinivas Kandagatla]

WSA881x powerdown pin is connected to GPIO1 not gpio2, so correct this.
This was working so far due to a shift bug in gpio driver, however
once that is fixed this will stop working, so fix this!

Fixes: 89a32a4e769cc ("arm64: dts: qcom: db845c: add analog audio support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 0040e138df67..5adf9dcbce2e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1015,7 +1015,7 @@
 		left_spkr: wsa8810-left{
 			compatible = "sdw10217201000";
 			reg = <0 1>;
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -1023,7 +1023,7 @@
 
 		right_spkr: wsa8810-right{
 			compatible = "sdw10217201000";
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			reg = <0 2>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";
-- 
2.21.0