linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH net-next] net: dsa: rtl8366rb: support bridge offloading
@ 2021-03-15 17:01 LGA1150
  2021-03-15 21:49 ` Vladimir Oltean
  0 siblings, 1 reply; 2+ messages in thread
From: LGA1150 @ 2021-03-15 17:01 UTC (permalink / raw)
  To: Andrew Lunn, Vivien Didelot, Florian Fainelli, Vladimir Oltean,
	David S. Miller, Jakub Kicinski, Russell King, netdev,
	linux-kernel
  Cc: DENG Qingfang, Linus Walleij

From: DENG Qingfang <dqfext@gmail.com>

Use port isolation registers to configure bridge offloading.
Remove the VLAN init, as we have proper CPU tag and bridge offloading
support now.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
Changes since RFC:
  Fix build error

 drivers/net/dsa/rtl8366rb.c | 71 +++++++++++++++++++++++++++++++++----
 1 file changed, 65 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a89093bc6c6a..bbcfdd84f0e9 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -300,6 +300,12 @@
 #define RTL8366RB_INTERRUPT_STATUS_REG	0x0442
 #define RTL8366RB_NUM_INTERRUPT		14 /* 0..13 */
 
+/* Port isolation registers */
+#define RTL8366RB_PORT_ISO_BASE		0x0F08
+#define RTL8366RB_PORT_ISO(pnum)	(RTL8366RB_PORT_ISO_BASE + (pnum))
+#define RTL8366RB_PORT_ISO_EN		BIT(0)
+#define RTL8366RB_PORT_ISO_PORTS_MASK	GENMASK(7, 1)
+
 /* bits 0..5 enable force when cleared */
 #define RTL8366RB_MAC_FORCE_CTRL_REG	0x0F11
 
@@ -835,6 +841,15 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
+	/* Isolate user ports */
+	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+		ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(i),
+				   RTL8366RB_PORT_ISO_EN |
+				   BIT(RTL8366RB_PORT_NUM_CPU + 1));
+		if (ret)
+			return ret;
+	}
+
 	/* Set up the "green ethernet" feature */
 	ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
 				  ARRAY_SIZE(rtl8366rb_green_jam), smi, false);
@@ -963,10 +978,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 			return ret;
 	}
 
-	ret = rtl8366_init_vlan(smi);
-	if (ret)
-		return ret;
-
 	ret = rtl8366rb_setup_cascaded_irq(smi);
 	if (ret)
 		dev_info(smi->dev, "no interrupt support\n");
@@ -977,8 +988,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 		return -ENODEV;
 	}
 
-	ds->configure_vlan_while_not_filtering = false;
-
 	return 0;
 }
 
@@ -1127,6 +1136,54 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port)
 	rb8366rb_set_port_led(smi, port, false);
 }
 
+static int
+rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
+			   struct net_device *bridge)
+{
+	struct realtek_smi *smi = ds->priv;
+	unsigned int port_bitmap = 0;
+	int ret, i;
+
+	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+		if (i == port)
+			continue;
+		if (dsa_to_port(ds, i)->bridge_dev != bridge)
+			continue;
+		ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+					 0, BIT(port + 1));
+		if (ret)
+			return ret;
+
+		port_bitmap |= BIT(i);
+	}
+
+	return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+				  0, port_bitmap << 1);
+}
+
+static void
+rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
+			    struct net_device *bridge)
+{
+	struct realtek_smi *smi = ds->priv;
+	unsigned int port_bitmap = 0;
+	int i;
+
+	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+		if (i == port)
+			continue;
+		if (dsa_to_port(ds, i)->bridge_dev != bridge)
+			continue;
+		regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+				   BIT(port + 1), 0);
+
+		port_bitmap |= BIT(i);
+	}
+
+	regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+			   port_bitmap << 1, 0);
+}
+
 static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 {
 	struct realtek_smi *smi = ds->priv;
@@ -1510,6 +1567,8 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops = {
 	.get_strings = rtl8366_get_strings,
 	.get_ethtool_stats = rtl8366_get_ethtool_stats,
 	.get_sset_count = rtl8366_get_sset_count,
+	.port_bridge_join = rtl8366rb_port_bridge_join,
+	.port_bridge_leave = rtl8366rb_port_bridge_leave,
 	.port_vlan_filtering = rtl8366_vlan_filtering,
 	.port_vlan_add = rtl8366_vlan_add,
 	.port_vlan_del = rtl8366_vlan_del,
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH net-next] net: dsa: rtl8366rb: support bridge offloading
  2021-03-15 17:01 [PATCH net-next] net: dsa: rtl8366rb: support bridge offloading LGA1150
@ 2021-03-15 21:49 ` Vladimir Oltean
  0 siblings, 0 replies; 2+ messages in thread
From: Vladimir Oltean @ 2021-03-15 21:49 UTC (permalink / raw)
  To: LGA1150
  Cc: Andrew Lunn, Vivien Didelot, Florian Fainelli, David S. Miller,
	Jakub Kicinski, Russell King, netdev, linux-kernel,
	Linus Walleij

On Tue, Mar 16, 2021 at 01:01:44AM +0800, LGA1150 wrote:
> From: DENG Qingfang <dqfext@gmail.com>
> 
> Use port isolation registers to configure bridge offloading.
> Remove the VLAN init, as we have proper CPU tag and bridge offloading
> support now.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>
> ---
> Changes since RFC:
>   Fix build error
> 
>  drivers/net/dsa/rtl8366rb.c | 71 +++++++++++++++++++++++++++++++++----
>  1 file changed, 65 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
> index a89093bc6c6a..bbcfdd84f0e9 100644
> --- a/drivers/net/dsa/rtl8366rb.c
> +++ b/drivers/net/dsa/rtl8366rb.c
> @@ -300,6 +300,12 @@
>  #define RTL8366RB_INTERRUPT_STATUS_REG	0x0442
>  #define RTL8366RB_NUM_INTERRUPT		14 /* 0..13 */
>  
> +/* Port isolation registers */
> +#define RTL8366RB_PORT_ISO_BASE		0x0F08
> +#define RTL8366RB_PORT_ISO(pnum)	(RTL8366RB_PORT_ISO_BASE + (pnum))
> +#define RTL8366RB_PORT_ISO_EN		BIT(0)
> +#define RTL8366RB_PORT_ISO_PORTS_MASK	GENMASK(7, 1)
> +
>  /* bits 0..5 enable force when cleared */
>  #define RTL8366RB_MAC_FORCE_CTRL_REG	0x0F11
>  
> @@ -835,6 +841,15 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
>  	if (ret)
>  		return ret;
>  
> +	/* Isolate user ports */
> +	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
> +		ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(i),
> +				   RTL8366RB_PORT_ISO_EN |
> +				   BIT(RTL8366RB_PORT_NUM_CPU + 1));

You have a RTL8366RB_PORT_ISO_PORTS_MASK that you don't use, and you
open-code a +1 here and everywhere below. Wouldn't it be more useful to
have a macro for RTL8366RB_PORT_ISO_PORTS(mask)?

> +		if (ret)
> +			return ret;
> +	}
> +
>  	/* Set up the "green ethernet" feature */
>  	ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
>  				  ARRAY_SIZE(rtl8366rb_green_jam), smi, false);
> @@ -963,10 +978,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
>  			return ret;
>  	}
>  
> -	ret = rtl8366_init_vlan(smi);
> -	if (ret)
> -		return ret;
> -

You can actually delete rtl8366_init_vlan now, it is unused.

>  	ret = rtl8366rb_setup_cascaded_irq(smi);
>  	if (ret)
>  		dev_info(smi->dev, "no interrupt support\n");
> @@ -977,8 +988,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
>  		return -ENODEV;
>  	}
>  
> -	ds->configure_vlan_while_not_filtering = false;
> -
>  	return 0;
>  }
>  
> @@ -1127,6 +1136,54 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port)
>  	rb8366rb_set_port_led(smi, port, false);
>  }
>  
> +static int
> +rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
> +			   struct net_device *bridge)
> +{
> +	struct realtek_smi *smi = ds->priv;
> +	unsigned int port_bitmap = 0;
> +	int ret, i;
> +
> +	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {

Could you use ds->num_ports please?

> +		if (i == port)
> +			continue;
> +		if (dsa_to_port(ds, i)->bridge_dev != bridge)
> +			continue;
> +		ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
> +					 0, BIT(port + 1));

You call regmap_update_bits with a mask of 0? What does it mean?
This is tested, right?

> +		if (ret)
> +			return ret;
> +
> +		port_bitmap |= BIT(i);
> +	}
> +
> +	return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
> +				  0, port_bitmap << 1);
> +}
> +
> +static void
> +rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
> +			    struct net_device *bridge)
> +{
> +	struct realtek_smi *smi = ds->priv;
> +	unsigned int port_bitmap = 0;
> +	int i;
> +
> +	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
> +		if (i == port)
> +			continue;
> +		if (dsa_to_port(ds, i)->bridge_dev != bridge)
> +			continue;
> +		regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
> +				   BIT(port + 1), 0);
> +
> +		port_bitmap |= BIT(i);
> +	}
> +
> +	regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
> +			   port_bitmap << 1, 0);
> +}
> +

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-03-15 21:50 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-15 17:01 [PATCH net-next] net: dsa: rtl8366rb: support bridge offloading LGA1150
2021-03-15 21:49 ` Vladimir Oltean

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).