* [PATCH v5 0/3] media: i2c: Introduce driver for the TW9900 decoder
@ 2021-04-01 7:07 Maxime Chevallier
2021-04-01 7:08 ` [PATCH v5 1/3] dt-bindings: vendor-prefixes: Add techwell vendor prefix Maxime Chevallier
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Maxime Chevallier @ 2021-04-01 7:07 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Hans Verkuil
Cc: Maxime Chevallier, linux-media, devicetree, linux-kernel,
Thomas Petazzoni, Miquel Raynal, Paul Kocialkowski
Hello everyone,
This is the fifth version of the series adding support for the Techwell
TW9900 multi standard decoder. It's a pretty simple decoder compared to
the TW9910, since it doesn't have a built-in scaler/crop engine.
this fifth version addresses reviews by Hans and Rob, with the notable
addition of the querystd ops for standard detection.
Any feedback is appreciated,
Thanks,
Maxime
Maxime Chevallier (3):
dt-bindings: vendor-prefixes: Add techwell vendor prefix
media: dt-bindings: media: i2c: Add bindings for TW9900
media: i2c: Introduce a driver for the Techwell TW9900 decoder
.../bindings/media/i2c/techwell,tw9900.yaml | 63 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 6 +
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/tw9900.c | 664 ++++++++++++++++++
6 files changed, 747 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
create mode 100644 drivers/media/i2c/tw9900.c
--
2.25.4
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v5 1/3] dt-bindings: vendor-prefixes: Add techwell vendor prefix 2021-04-01 7:07 [PATCH v5 0/3] media: i2c: Introduce driver for the TW9900 decoder Maxime Chevallier @ 2021-04-01 7:08 ` Maxime Chevallier 2021-04-01 7:08 ` [PATCH v5 2/3] media: dt-bindings: media: i2c: Add bindings for TW9900 Maxime Chevallier 2021-04-01 7:08 ` [PATCH v5 3/3] media: i2c: Introduce a driver for the Techwell TW9900 decoder Maxime Chevallier 2 siblings, 0 replies; 6+ messages in thread From: Maxime Chevallier @ 2021-04-01 7:08 UTC (permalink / raw) To: Mauro Carvalho Chehab, Rob Herring, Hans Verkuil Cc: Maxime Chevallier, linux-media, devicetree, linux-kernel, Thomas Petazzoni, Miquel Raynal, Paul Kocialkowski, Rob Herring Add prefix for Techwell, Inc. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f6064d84a424..bd02517ebdbc 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1107,6 +1107,8 @@ patternProperties: description: TechNexion "^technologic,.*": description: Technologic Systems + "^techwell,.*": + description: Techwell, Inc. "^tempo,.*": description: Tempo Semiconductor "^techstar,.*": -- 2.25.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v5 2/3] media: dt-bindings: media: i2c: Add bindings for TW9900 2021-04-01 7:07 [PATCH v5 0/3] media: i2c: Introduce driver for the TW9900 decoder Maxime Chevallier 2021-04-01 7:08 ` [PATCH v5 1/3] dt-bindings: vendor-prefixes: Add techwell vendor prefix Maxime Chevallier @ 2021-04-01 7:08 ` Maxime Chevallier 2021-04-01 16:37 ` Rob Herring 2021-04-01 7:08 ` [PATCH v5 3/3] media: i2c: Introduce a driver for the Techwell TW9900 decoder Maxime Chevallier 2 siblings, 1 reply; 6+ messages in thread From: Maxime Chevallier @ 2021-04-01 7:08 UTC (permalink / raw) To: Mauro Carvalho Chehab, Rob Herring, Hans Verkuil Cc: Maxime Chevallier, linux-media, devicetree, linux-kernel, Thomas Petazzoni, Miquel Raynal, Paul Kocialkowski The Techwell TW9900 is a video decoder supporting multiple input standards, such as PAL, NTSC and SECAM, and outputs a BT.656 video signal. It's designed to be low-power, posesses some features such as a programmable comb-filter, and automatic input standard detection. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- V2->V3 : Fix the example not compiling due to a typo in the reset-gpios node. V3->V4 : Add the missing reset-gpios node to the binding V4->V5 : Renamed the file to match the compatible string, and referenced the graph.yaml schema .../bindings/media/i2c/techwell,tw9900.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml new file mode 100644 index 000000000000..b5047c26f0cb --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/techwell,tw9900.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Techwell TW9900 NTSC/PAL/SECAM video decoder + +maintainers: + - Maxime Chevallier <maxime.chevallier@bootlin.com> + +description: + The tw9900 is a multi-standard video decoder, supporting NTSC, PAL and SECAM + standards with auto-detection features. + +properties: + compatible: + items: + - enum: + - techwell,tw9900 + + reg: + maxItems: 1 + + vdd-supply: + description: VDD power supply + + reset-gpios: + description: GPIO descriptor for the RESET input pin + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for the decoder output. + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tw9900: tw9900@44 { + compatible = "techwell,tw9900"; + reg = <0x44>; + + vdd-supply = <&tw9900_supply>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + + port { + tw9900_out: endpoint { + remote-endpoint = <&vip_in>; + }; + }; + }; + }; -- 2.25.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5 2/3] media: dt-bindings: media: i2c: Add bindings for TW9900 2021-04-01 7:08 ` [PATCH v5 2/3] media: dt-bindings: media: i2c: Add bindings for TW9900 Maxime Chevallier @ 2021-04-01 16:37 ` Rob Herring 0 siblings, 0 replies; 6+ messages in thread From: Rob Herring @ 2021-04-01 16:37 UTC (permalink / raw) To: Maxime Chevallier Cc: Paul Kocialkowski, Thomas Petazzoni, linux-kernel, Rob Herring, Miquel Raynal, devicetree, Hans Verkuil, linux-media, Mauro Carvalho Chehab On Thu, 01 Apr 2021 09:08:01 +0200, Maxime Chevallier wrote: > The Techwell TW9900 is a video decoder supporting multiple input > standards, such as PAL, NTSC and SECAM, and outputs a BT.656 video > signal. > > It's designed to be low-power, posesses some features such as a > programmable comb-filter, and automatic input standard detection. > > Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> > --- > V2->V3 : Fix the example not compiling due to a typo in the reset-gpios > node. > > V3->V4 : Add the missing reset-gpios node to the binding > > V4->V5 : Renamed the file to match the compatible string, and referenced > the graph.yaml schema > > .../bindings/media/i2c/techwell,tw9900.yaml | 63 +++++++++++++++++++ > 1 file changed, 63 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v5 3/3] media: i2c: Introduce a driver for the Techwell TW9900 decoder 2021-04-01 7:07 [PATCH v5 0/3] media: i2c: Introduce driver for the TW9900 decoder Maxime Chevallier 2021-04-01 7:08 ` [PATCH v5 1/3] dt-bindings: vendor-prefixes: Add techwell vendor prefix Maxime Chevallier 2021-04-01 7:08 ` [PATCH v5 2/3] media: dt-bindings: media: i2c: Add bindings for TW9900 Maxime Chevallier @ 2021-04-01 7:08 ` Maxime Chevallier 2021-04-06 13:36 ` Hans Verkuil 2 siblings, 1 reply; 6+ messages in thread From: Maxime Chevallier @ 2021-04-01 7:08 UTC (permalink / raw) To: Mauro Carvalho Chehab, Rob Herring, Hans Verkuil Cc: Maxime Chevallier, linux-media, devicetree, linux-kernel, Thomas Petazzoni, Miquel Raynal, Paul Kocialkowski The Techwell video decoder supports PAL, NTSC and SECAM input formats, and outputs a BT.656 signal. This commit adds support for this device, with basic support for NTSC and PAL, along with brightness and contrast controls. The TW9900 is capable of doing automatic standard detection, this is implemented with support for PAL and NTSC autodetection. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- v1 -> v2: Set the media entity type to decoder, and implement the s_std/g_std ops V2 ->V3 : Fix coding-style issues, and remove the use of the bulk API for regulators. Make the driver select the media-controller and V4L2-subdev APIs. V3->V4: Fix a warning about an uninitialized ret variable in probe() V4->V5: Added .querystd() and .g_tvnorms(), dropped the .open() and unified the g_fmt() / s_fmt(). MAINTAINERS | 6 + drivers/media/i2c/Kconfig | 11 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tw9900.c | 664 +++++++++++++++++++++++++++++++++++++ 4 files changed, 682 insertions(+) create mode 100644 drivers/media/i2c/tw9900.c diff --git a/MAINTAINERS b/MAINTAINERS index d92f85ca831d..d2e57e174b51 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17549,6 +17549,12 @@ L: linux-media@vger.kernel.org S: Maintained F: drivers/media/rc/ttusbir.c +TECHWELL TW9900 VIDEO DECODER +M: Maxime Chevallier <maxime.chevallier@bootlin.com> +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/i2c/tw9900.c + TECHWELL TW9910 VIDEO DECODER L: linux-media@vger.kernel.org S: Orphan diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 462c0e059754..2dbcee42a915 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -426,6 +426,17 @@ config VIDEO_TW2804 To compile this driver as a module, choose M here: the module will be called tw2804. +config VIDEO_TW9900 + tristate "Techwell TW9900 video decoder" + depends on VIDEO_V4L2 && I2C + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + help + Support for the Techwell tw9900 multi-standard video decoder. + + To compile this driver as a module, choose M here: the + module will be called tw9900. + config VIDEO_TW9903 tristate "Techwell TW9903 video decoder" depends on VIDEO_V4L2 && I2C diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 0c067beca066..3cc81e00b7da 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o obj-$(CONFIG_VIDEO_TW2804) += tw2804.o +obj-$(CONFIG_VIDEO_TW9900) += tw9900.o obj-$(CONFIG_VIDEO_TW9903) += tw9903.o obj-$(CONFIG_VIDEO_TW9906) += tw9906.o obj-$(CONFIG_VIDEO_TW9910) += tw9910.o diff --git a/drivers/media/i2c/tw9900.c b/drivers/media/i2c/tw9900.c new file mode 100644 index 000000000000..d7a3be4f3daa --- /dev/null +++ b/drivers/media/i2c/tw9900.c @@ -0,0 +1,664 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Techwell TW9900 multi-standard video decoder. + * + * Copyright (C) 2018 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (C) 2020 Maxime Chevallier <maxime.chevallier@bootlin.com> + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/sysfs.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <media/media-entity.h> +#include <media/v4l2-async.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> +#include <media/v4l2-subdev.h> + +#define TW9900_REG_CHIP_ID 0x00 +#define TW9900_REG_CHIP_STATUS 0x01 +#define TW9900_REG_CHIP_STATUS_VLOCK 0x08 +#define TW9900_REG_CHIP_STATUS_VDLOSS 0x80 +#define TW9900_REG_OUT_FMT_CTL 0x03 +#define TW9900_REG_OUT_FMT_CTL_STANDBY 0xA7 +#define TW9900_REG_OUT_FMT_CTL_STREAMING 0xA0 +#define TW9900_REG_CKHY_HSDLY 0x04 +#define TW9900_REG_OUT_CTRL_I 0x05 +#define TW9900_REG_ANALOG_CTL 0x06 +#define TW9900_REG_CROP_HI 0x07 +#define TW9900_REG_VDELAY_LO 0x08 +#define TW9900_REG_VACTIVE_LO 0x09 +#define TW9900_REG_HACTIVE_LO 0x0B +#define TW9900_REG_CNTRL1 0x0C +#define TW9900_REG_BRIGHT_CTL 0x10 +#define TW9900_REG_CONTRAST_CTL 0x11 +#define TW9900_REG_VBI_CNTL 0x19 +#define TW9900_REG_ANAL_CTL_II 0x1A +#define TW9900_REG_OUT_CTRL_II 0x1B +#define TW9900_REG_STD_SEL 0x1C +#define TW9900_REG_STD_SEL_AUTODETECT_IN_PROGRESS BIT(7) +#define TW9900_REG_STDR 0x1D +#define TW9900_REG_MISSCNT 0x26 +#define TW9900_REG_MISC_CTL_II 0x2F +#define TW9900_REG_VVBI 0x55 + +#define TW9900_CHIP_ID 0x00 + +#define VSYNC_POLL_INTERVAL_MS 20 +#define VSYNC_WAIT_MAX_POLLS 50 + +#define TW9900_STD_NTSC_M 0 +#define TW9900_STD_PAL_BDGHI 1 +#define TW9900_STD_SECAM 2 +#define TW9900_STD_NTSC_4_43 3 +#define TW9900_STD_PAL_M 4 +#define TW9900_STD_PAL_CN 5 +#define TW9900_STD_PAL_60 6 +#define TW9900_STD_AUTO 7 +#define TW9900_STD_UNKOWN 7 + +#define TW9900_VIDEO_POLL_TIMEOUT 20 + +struct regval { + u8 addr; + u8 val; +}; + +struct tw9900_mode { + u32 width; + u32 height; + u32 skip_top; + u32 std; + u32 field; + const struct regval *reg_list; + int n_regs; +}; + +struct tw9900 { + struct i2c_client *client; + struct gpio_desc *reset_gpio; + struct regulator *regulator; + + bool streaming; + + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct media_pad pad; + + struct timer_list timer; + struct work_struct work_i2c_poll; + + const struct tw9900_mode *cur_mode; +}; + +#define to_tw9900(sd) container_of(sd, struct tw9900, subdev) + +static const struct regval tw9900_init_regs[] = { + { TW9900_REG_MISC_CTL_II, 0xE6 }, + { TW9900_REG_MISSCNT, 0x24 }, + { TW9900_REG_OUT_FMT_CTL, 0xA7 }, + { TW9900_REG_ANAL_CTL_II, 0x0A }, + { TW9900_REG_VDELAY_LO, 0x19 }, + { TW9900_REG_STD_SEL, 0x00 }, + { TW9900_REG_VACTIVE_LO, 0xF0 }, + { TW9900_REG_STD_SEL, 0x07 }, + { TW9900_REG_CKHY_HSDLY, 0x40 }, + { TW9900_REG_ANALOG_CTL, 0x80 }, + { TW9900_REG_CNTRL1, 0xDC }, + { TW9900_REG_OUT_CTRL_I, 0x98 }, +}; + +static const struct regval tw9900_pal_regs[] = { + { TW9900_REG_STD_SEL, 0x01 }, +}; + +static const struct regval tw9900_ntsc_regs[] = { + { TW9900_REG_OUT_FMT_CTL, 0xA4 }, + { TW9900_REG_VDELAY_LO, 0x12 }, + { TW9900_REG_VACTIVE_LO, 0xF0 }, + { TW9900_REG_CROP_HI, 0x02 }, + { TW9900_REG_HACTIVE_LO, 0xD0 }, + { TW9900_REG_VBI_CNTL, 0x01 }, + { TW9900_REG_STD_SEL, 0x00 }, +}; + +static const struct tw9900_mode supported_modes[] = { + { + .width = 720, + .height = 576, + .skip_top = 0, + .std = V4L2_STD_PAL, + .field = V4L2_FIELD_NONE, + .reg_list = tw9900_pal_regs, + .n_regs = ARRAY_SIZE(tw9900_pal_regs), + }, + { + .width = 720, + .height = 480, + .skip_top = 0, + .std = V4L2_STD_NTSC, + .field = V4L2_FIELD_NONE, + .reg_list = tw9900_ntsc_regs, + .n_regs = ARRAY_SIZE(tw9900_ntsc_regs), + }, +}; + +static int tw9900_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, reg, val); + + if (ret < 0) + dev_err(&client->dev, "write reg error: %d\n", ret); + + return ret; +} + +static int tw9900_write_array(struct i2c_client *client, + const struct regval *regs, int n_regs) +{ + int i, ret = 0; + + for (i = 0; ret == 0 && i <= n_regs; i++) + ret = tw9900_write_reg(client, regs[i].addr, regs[i].val); + + return ret; +} + +static inline u8 tw9900_read_reg(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static void tw9900_fill_fmt(const struct tw9900_mode *mode, + struct v4l2_mbus_framefmt *fmt) +{ + fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; + fmt->width = mode->width; + fmt->height = mode->height; + fmt->field = mode->field; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; +} + +static int tw9900_cfg_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *fmt) +{ + struct tw9900 *tw9900 = to_tw9900(sd); + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; + + tw9900_fill_fmt(tw9900->cur_mode, mbus_fmt); + + return 0; +} + +static int tw9900_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= 1) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_UYVY8_2X8; + + return 0; +} + +static int tw9900_power_on(struct tw9900 *tw9900) +{ + int ret; + struct device *dev = &tw9900->client->dev; + + if (tw9900->reset_gpio) + gpiod_set_value_cansleep(tw9900->reset_gpio, 1); + + ret = regulator_enable(tw9900->regulator); + if (ret < 0) + goto error; + + usleep_range(50000, 52000); + + if (tw9900->reset_gpio) + gpiod_set_value_cansleep(tw9900->reset_gpio, 0); + + usleep_range(1000, 2000); + + ret = tw9900_write_array(tw9900->client, tw9900_init_regs, + ARRAY_SIZE(tw9900_init_regs)); + if (ret) { + dev_err(dev, "Failed to init tw9900\n"); + goto error; + } + + return 0; + +error: + + return ret; +} + +static void tw9900_power_off(struct tw9900 *tw9900) +{ + if (tw9900->reset_gpio) + gpiod_set_value_cansleep(tw9900->reset_gpio, 1); + + regulator_disable(tw9900->regulator); +} + +static int tw9900_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct tw9900 *tw9900 = container_of(ctrl->handler, struct tw9900, hdl); + + if (pm_runtime_suspended(&tw9900->client->dev)) + return 0; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + tw9900_write_reg(tw9900->client, 0x10, (u8)ctrl->val); + break; + case V4L2_CID_CONTRAST: + tw9900_write_reg(tw9900->client, 0x11, (u8)ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +static int tw9900_s_stream(struct v4l2_subdev *sd, int on) +{ + struct tw9900 *tw9900 = to_tw9900(sd); + struct i2c_client *client = tw9900->client; + int ret = 0; + + on = !!on; + if (on == tw9900->streaming) + return 0; + + if (on) { + ret = pm_runtime_get_sync(&tw9900->client->dev); + if (ret < 0) { + pm_runtime_put_noidle(&client->dev); + return ret; + } + + ret = v4l2_ctrl_handler_setup(sd->ctrl_handler); + if (ret) + goto put_and_return; + + ret = tw9900_write_array(tw9900->client, + tw9900->cur_mode->reg_list, + tw9900->cur_mode->n_regs); + if (ret) + goto put_and_return; + + ret = tw9900_write_reg(client, TW9900_REG_OUT_FMT_CTL, + TW9900_REG_OUT_FMT_CTL_STREAMING); + if (ret) + goto put_and_return; + + } else { + tw9900_write_reg(client, TW9900_REG_OUT_FMT_CTL, + TW9900_REG_OUT_FMT_CTL_STANDBY); + pm_runtime_put(&client->dev); + } + + tw9900->streaming = on; + + return ret; + +put_and_return: + pm_runtime_put(&client->dev); + + return ret; +} + +static int tw9900_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tw9900 *tw9900 = to_tw9900(sd); + + return tw9900_power_on(tw9900); +} + +static int tw9900_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tw9900 *tw9900 = to_tw9900(sd); + + tw9900_power_off(tw9900); + + return 0; +} + +static int tw9900_subscribe_event(struct v4l2_subdev *sd, + struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_SOURCE_CHANGE: + return v4l2_src_change_event_subdev_subscribe(sd, fh, sub); + case V4L2_EVENT_CTRL: + return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub); + default: + return -EINVAL; + } +} + +static const struct tw9900_mode *tw9900_get_mode_from_std(v4l2_std_id std) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(supported_modes); i++) + if (supported_modes[i].std == std) + return &supported_modes[i]; + + return NULL; +} + +static int tw9900_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct tw9900 *tw9900 = to_tw9900(sd); + const struct tw9900_mode *mode; + int ret; + + if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL))) + return -EINVAL; + + mode = tw9900_get_mode_from_std(norm); + if (!mode) + return -EINVAL; + + ret = tw9900_write_array(tw9900->client, mode->reg_list, mode->n_regs); + if (ret) + return ret; + + tw9900->cur_mode = mode; + + return 0; +} + + +static unsigned int tw9900_get_stream_std(struct tw9900 *tw9900) +{ + u8 std, val; + + /* proper #define */ + val = tw9900_read_reg(tw9900->client, TW9900_REG_STD_SEL); + std = (val & 0x70) >> 4; + + switch (std) { + + case TW9900_STD_NTSC_M: + return V4L2_STD_NTSC; + case TW9900_STD_PAL_BDGHI: + return V4L2_STD_PAL; + case TW9900_STD_SECAM: + return V4L2_STD_SECAM; + case TW9900_STD_NTSC_4_43: + return V4L2_STD_NTSC; + case TW9900_STD_PAL_M: + case TW9900_STD_PAL_CN: + case TW9900_STD_PAL_60: + return V4L2_STD_PAL; + case TW9900_STD_AUTO: + return V4L2_STD_UNKNOWN; + default: + return V4L2_STD_UNKNOWN; + + } + return V4L2_STD_UNKNOWN; +} + +static int tw9900_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct tw9900 *tw9900 = to_tw9900(sd); + + *std = tw9900->cur_mode->std; + + return 0; +} + +static void tw9900_start_autodetect(struct tw9900 *tw9900) +{ + tw9900_write_reg(tw9900->client, TW9900_REG_STDR, + BIT(TW9900_STD_NTSC_M) | BIT(TW9900_STD_PAL_BDGHI)); + + tw9900_write_reg(tw9900->client, TW9900_REG_STD_SEL, TW9900_STD_AUTO); + + tw9900_write_reg(tw9900->client, TW9900_REG_STDR, + BIT(TW9900_STD_NTSC_M) | BIT(TW9900_STD_PAL_BDGHI) | + BIT(TW9900_STD_AUTO)); + + /* Autodetect takes a while to start, and during the starting sequence + * the autodetection status is reported as done. + */ + msleep(30); +} + +static int tw9900_cancel_autodetect(struct tw9900 *tw9900) +{ + return tw9900_s_std(&tw9900->subdev, tw9900->cur_mode->std); +} + +static bool tw9900_detect_done(struct tw9900 *tw9900) +{ + u8 val = tw9900_read_reg(tw9900->client, TW9900_REG_STD_SEL); + + return !(val & TW9900_REG_STD_SEL_AUTODETECT_IN_PROGRESS); +} + +static int tw9900_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct tw9900 *tw9900 = to_tw9900(sd); + int i; + + if (tw9900->streaming) + return -EBUSY; + + tw9900_start_autodetect(tw9900); + + for (i = 0; i < TW9900_VIDEO_POLL_TIMEOUT; i++) { + if (tw9900_detect_done(tw9900)) + break; + + msleep(20); + } + + if (!tw9900_detect_done(tw9900)) { + tw9900_cancel_autodetect(tw9900); + return -EBUSY; + } + + *std = tw9900_get_stream_std(tw9900); + + return 0; +} + +static int tw9900_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm) +{ + *norm = V4L2_STD_NTSC | V4L2_STD_PAL; + + return 0; +} + +static const struct dev_pm_ops tw9900_pm_ops = { + SET_RUNTIME_PM_OPS(tw9900_runtime_suspend, + tw9900_runtime_resume, NULL) +}; + +static const struct v4l2_subdev_core_ops tw9900_core_ops = { + .subscribe_event = tw9900_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_video_ops tw9900_video_ops = { + .s_std = tw9900_s_std, + .g_std = tw9900_g_std, + .querystd = tw9900_querystd, + .g_tvnorms = tw9900_g_tvnorms, + .s_stream = tw9900_s_stream, +}; + +static const struct v4l2_subdev_pad_ops tw9900_pad_ops = { + .enum_mbus_code = tw9900_enum_mbus_code, + .get_fmt = tw9900_cfg_fmt, + .set_fmt = tw9900_cfg_fmt, +}; + +static const struct v4l2_subdev_ops tw9900_subdev_ops = { + .core = &tw9900_core_ops, + .video = &tw9900_video_ops, + .pad = &tw9900_pad_ops, +}; + +static const struct v4l2_ctrl_ops tw9900_ctrl_ops = { + .s_ctrl = tw9900_s_ctrl, +}; + +static int tw9900_check_id(struct tw9900 *tw9900, + struct i2c_client *client) +{ + struct device *dev = &tw9900->client->dev; + u8 id; + + id = tw9900_read_reg(client, TW9900_CHIP_ID); + + if (id != TW9900_CHIP_ID) { + dev_err(dev, "Unexpected decoder id(%04x)\n", id); + return -EINVAL; + } + + dev_info(dev, "Detected TW9900 (%04x) decoder\n", TW9900_CHIP_ID); + + return 0; +} + +static int tw9900_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct v4l2_ctrl_handler *hdl; + struct tw9900 *tw9900; + int ret = 0; + + tw9900 = devm_kzalloc(dev, sizeof(*tw9900), GFP_KERNEL); + if (!tw9900) + return -ENOMEM; + + tw9900->client = client; + tw9900->cur_mode = &supported_modes[0]; + + tw9900->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(tw9900->reset_gpio)) + tw9900->reset_gpio = NULL; + + tw9900->regulator = devm_regulator_get(&tw9900->client->dev, "vdd"); + if (IS_ERR(tw9900->regulator)) { + dev_err(dev, "Failed to get power regulator\n"); + return ret; + } + + v4l2_i2c_subdev_init(&tw9900->subdev, client, &tw9900_subdev_ops); + tw9900->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS; + + hdl = &tw9900->hdl; + + v4l2_ctrl_handler_init(hdl, 2); + + v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_BRIGHTNESS, + -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_CONTRAST, + 0, 255, 1, 0x60); + + tw9900->subdev.ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + return err; + } + + ret = tw9900_power_on(tw9900); + if (ret) + return ret; + + ret = tw9900_check_id(tw9900, client); + if (ret) + goto err_power_off; + + tw9900->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + tw9900->pad.flags = MEDIA_PAD_FL_SOURCE; + tw9900->subdev.entity.function = MEDIA_ENT_F_DV_DECODER; + + ret = media_entity_pads_init(&tw9900->subdev.entity, 1, &tw9900->pad); + if (ret < 0) + goto err_power_off; + + ret = v4l2_async_register_subdev(&tw9900->subdev); + if (ret) { + dev_err(dev, "v4l2 async register subdev failed\n"); + goto err_clean_entity; + } + + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_idle(dev); + + return 0; + +err_clean_entity: + media_entity_cleanup(&tw9900->subdev.entity); +err_power_off: + tw9900_power_off(tw9900); + + return ret; +} + +static int tw9900_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tw9900 *tw9900 = to_tw9900(sd); + + v4l2_async_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + + pm_runtime_disable(&client->dev); + if (!pm_runtime_status_suspended(&client->dev)) + tw9900_power_off(tw9900); + pm_runtime_set_suspended(&client->dev); + + return 0; +} + +static const struct of_device_id tw9900_of_match[] = { + { .compatible = "techwell,tw9900" }, + {}, +}; +MODULE_DEVICE_TABLE(of, tw9900_of_match); + +static struct i2c_driver tw9900_i2c_driver = { + .driver = { + .name = "tw9900", + .pm = &tw9900_pm_ops, + .of_match_table = tw9900_of_match + }, + .probe = tw9900_probe, + .remove = tw9900_remove, +}; + +module_i2c_driver(tw9900_i2c_driver); + +MODULE_DESCRIPTION("tw9900 decoder driver"); +MODULE_LICENSE("GPL v2"); -- 2.25.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5 3/3] media: i2c: Introduce a driver for the Techwell TW9900 decoder 2021-04-01 7:08 ` [PATCH v5 3/3] media: i2c: Introduce a driver for the Techwell TW9900 decoder Maxime Chevallier @ 2021-04-06 13:36 ` Hans Verkuil 0 siblings, 0 replies; 6+ messages in thread From: Hans Verkuil @ 2021-04-06 13:36 UTC (permalink / raw) To: Maxime Chevallier, Mauro Carvalho Chehab, Rob Herring Cc: linux-media, devicetree, linux-kernel, Thomas Petazzoni, Miquel Raynal, Paul Kocialkowski Hi Maxime, Some comments below: On 01/04/2021 09:08, Maxime Chevallier wrote: > The Techwell video decoder supports PAL, NTSC and SECAM input formats, > and outputs a BT.656 signal. > > This commit adds support for this device, with basic support for NTSC > and PAL, along with brightness and contrast controls. > > The TW9900 is capable of doing automatic standard detection, this is > implemented with support for PAL and NTSC autodetection. > > Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> > --- > v1 -> v2: Set the media entity type to decoder, and implement the > s_std/g_std ops > > V2 ->V3 : Fix coding-style issues, and remove the use of the bulk API > for regulators. Make the driver select the media-controller and > V4L2-subdev APIs. > > V3->V4: Fix a warning about an uninitialized ret variable in probe() > > V4->V5: Added .querystd() and .g_tvnorms(), dropped the .open() and > unified the g_fmt() / s_fmt(). > > MAINTAINERS | 6 + > drivers/media/i2c/Kconfig | 11 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/tw9900.c | 664 +++++++++++++++++++++++++++++++++++++ > 4 files changed, 682 insertions(+) > create mode 100644 drivers/media/i2c/tw9900.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index d92f85ca831d..d2e57e174b51 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -17549,6 +17549,12 @@ L: linux-media@vger.kernel.org > S: Maintained > F: drivers/media/rc/ttusbir.c > > +TECHWELL TW9900 VIDEO DECODER > +M: Maxime Chevallier <maxime.chevallier@bootlin.com> > +L: linux-media@vger.kernel.org > +S: Maintained > +F: drivers/media/i2c/tw9900.c > + > TECHWELL TW9910 VIDEO DECODER > L: linux-media@vger.kernel.org > S: Orphan > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > index 462c0e059754..2dbcee42a915 100644 > --- a/drivers/media/i2c/Kconfig > +++ b/drivers/media/i2c/Kconfig > @@ -426,6 +426,17 @@ config VIDEO_TW2804 > To compile this driver as a module, choose M here: the > module will be called tw2804. > > +config VIDEO_TW9900 > + tristate "Techwell TW9900 video decoder" > + depends on VIDEO_V4L2 && I2C > + select MEDIA_CONTROLLER > + select VIDEO_V4L2_SUBDEV_API > + help > + Support for the Techwell tw9900 multi-standard video decoder. > + > + To compile this driver as a module, choose M here: the > + module will be called tw9900. > + > config VIDEO_TW9903 > tristate "Techwell TW9903 video decoder" > depends on VIDEO_V4L2 && I2C > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > index 0c067beca066..3cc81e00b7da 100644 > --- a/drivers/media/i2c/Makefile > +++ b/drivers/media/i2c/Makefile > @@ -49,6 +49,7 @@ obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o > obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o > obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o > obj-$(CONFIG_VIDEO_TW2804) += tw2804.o > +obj-$(CONFIG_VIDEO_TW9900) += tw9900.o > obj-$(CONFIG_VIDEO_TW9903) += tw9903.o > obj-$(CONFIG_VIDEO_TW9906) += tw9906.o > obj-$(CONFIG_VIDEO_TW9910) += tw9910.o > diff --git a/drivers/media/i2c/tw9900.c b/drivers/media/i2c/tw9900.c > new file mode 100644 > index 000000000000..d7a3be4f3daa > --- /dev/null > +++ b/drivers/media/i2c/tw9900.c > @@ -0,0 +1,664 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for the Techwell TW9900 multi-standard video decoder. > + * > + * Copyright (C) 2018 Fuzhou Rockchip Electronics Co., Ltd. > + * Copyright (C) 2020 Maxime Chevallier <maxime.chevallier@bootlin.com> > + */ > + > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/module.h> > +#include <linux/pm_runtime.h> > +#include <linux/regulator/consumer.h> > +#include <linux/sysfs.h> > +#include <linux/timer.h> > +#include <linux/delay.h> > +#include <media/media-entity.h> > +#include <media/v4l2-async.h> > +#include <media/v4l2-ctrls.h> > +#include <media/v4l2-event.h> > +#include <media/v4l2-subdev.h> > + > +#define TW9900_REG_CHIP_ID 0x00 > +#define TW9900_REG_CHIP_STATUS 0x01 > +#define TW9900_REG_CHIP_STATUS_VLOCK 0x08 > +#define TW9900_REG_CHIP_STATUS_VDLOSS 0x80 > +#define TW9900_REG_OUT_FMT_CTL 0x03 > +#define TW9900_REG_OUT_FMT_CTL_STANDBY 0xA7 > +#define TW9900_REG_OUT_FMT_CTL_STREAMING 0xA0 > +#define TW9900_REG_CKHY_HSDLY 0x04 > +#define TW9900_REG_OUT_CTRL_I 0x05 > +#define TW9900_REG_ANALOG_CTL 0x06 > +#define TW9900_REG_CROP_HI 0x07 > +#define TW9900_REG_VDELAY_LO 0x08 > +#define TW9900_REG_VACTIVE_LO 0x09 > +#define TW9900_REG_HACTIVE_LO 0x0B > +#define TW9900_REG_CNTRL1 0x0C > +#define TW9900_REG_BRIGHT_CTL 0x10 > +#define TW9900_REG_CONTRAST_CTL 0x11 > +#define TW9900_REG_VBI_CNTL 0x19 > +#define TW9900_REG_ANAL_CTL_II 0x1A > +#define TW9900_REG_OUT_CTRL_II 0x1B > +#define TW9900_REG_STD_SEL 0x1C > +#define TW9900_REG_STD_SEL_AUTODETECT_IN_PROGRESS BIT(7) > +#define TW9900_REG_STDR 0x1D > +#define TW9900_REG_MISSCNT 0x26 > +#define TW9900_REG_MISC_CTL_II 0x2F > +#define TW9900_REG_VVBI 0x55 > + > +#define TW9900_CHIP_ID 0x00 > + > +#define VSYNC_POLL_INTERVAL_MS 20 > +#define VSYNC_WAIT_MAX_POLLS 50 > + > +#define TW9900_STD_NTSC_M 0 > +#define TW9900_STD_PAL_BDGHI 1 > +#define TW9900_STD_SECAM 2 > +#define TW9900_STD_NTSC_4_43 3 > +#define TW9900_STD_PAL_M 4 > +#define TW9900_STD_PAL_CN 5 > +#define TW9900_STD_PAL_60 6 > +#define TW9900_STD_AUTO 7 > +#define TW9900_STD_UNKOWN 7 > + > +#define TW9900_VIDEO_POLL_TIMEOUT 20 > + > +struct regval { > + u8 addr; > + u8 val; > +}; > + > +struct tw9900_mode { > + u32 width; > + u32 height; > + u32 skip_top; > + u32 std; > + u32 field; Are skip_top and field really needed? These values are fixed and the same for both ntsc and pal. > + const struct regval *reg_list; > + int n_regs; > +}; > + > +struct tw9900 { > + struct i2c_client *client; > + struct gpio_desc *reset_gpio; > + struct regulator *regulator; > + > + bool streaming; > + > + struct v4l2_subdev subdev; > + struct v4l2_ctrl_handler hdl; > + struct media_pad pad; > + > + struct timer_list timer; > + struct work_struct work_i2c_poll; > + > + const struct tw9900_mode *cur_mode; > +}; > + > +#define to_tw9900(sd) container_of(sd, struct tw9900, subdev) > + > +static const struct regval tw9900_init_regs[] = { > + { TW9900_REG_MISC_CTL_II, 0xE6 }, > + { TW9900_REG_MISSCNT, 0x24 }, > + { TW9900_REG_OUT_FMT_CTL, 0xA7 }, > + { TW9900_REG_ANAL_CTL_II, 0x0A }, > + { TW9900_REG_VDELAY_LO, 0x19 }, > + { TW9900_REG_STD_SEL, 0x00 }, > + { TW9900_REG_VACTIVE_LO, 0xF0 }, > + { TW9900_REG_STD_SEL, 0x07 }, > + { TW9900_REG_CKHY_HSDLY, 0x40 }, > + { TW9900_REG_ANALOG_CTL, 0x80 }, > + { TW9900_REG_CNTRL1, 0xDC }, > + { TW9900_REG_OUT_CTRL_I, 0x98 }, > +}; > + > +static const struct regval tw9900_pal_regs[] = { > + { TW9900_REG_STD_SEL, 0x01 }, > +}; > + > +static const struct regval tw9900_ntsc_regs[] = { > + { TW9900_REG_OUT_FMT_CTL, 0xA4 }, > + { TW9900_REG_VDELAY_LO, 0x12 }, > + { TW9900_REG_VACTIVE_LO, 0xF0 }, > + { TW9900_REG_CROP_HI, 0x02 }, > + { TW9900_REG_HACTIVE_LO, 0xD0 }, > + { TW9900_REG_VBI_CNTL, 0x01 }, > + { TW9900_REG_STD_SEL, 0x00 }, > +}; > + > +static const struct tw9900_mode supported_modes[] = { > + { > + .width = 720, > + .height = 576, > + .skip_top = 0, > + .std = V4L2_STD_PAL, > + .field = V4L2_FIELD_NONE, > + .reg_list = tw9900_pal_regs, > + .n_regs = ARRAY_SIZE(tw9900_pal_regs), > + }, > + { > + .width = 720, > + .height = 480, > + .skip_top = 0, > + .std = V4L2_STD_NTSC, > + .field = V4L2_FIELD_NONE, > + .reg_list = tw9900_ntsc_regs, > + .n_regs = ARRAY_SIZE(tw9900_ntsc_regs), > + }, It is an (admittedly unwritten) convention that NTSC comes before PAL. So if the requested standard is some weird mix of NTSC and PAL standards, then NTSC shall be picked. Can you swap these two entries? > +}; > + > +static int tw9900_write_reg(struct i2c_client *client, u8 reg, u8 val) > +{ > + int ret; > + > + ret = i2c_smbus_write_byte_data(client, reg, val); > + > + if (ret < 0) > + dev_err(&client->dev, "write reg error: %d\n", ret); > + > + return ret; > +} > + > +static int tw9900_write_array(struct i2c_client *client, > + const struct regval *regs, int n_regs) > +{ > + int i, ret = 0; > + > + for (i = 0; ret == 0 && i <= n_regs; i++) > + ret = tw9900_write_reg(client, regs[i].addr, regs[i].val); > + > + return ret; > +} > + > +static inline u8 tw9900_read_reg(struct i2c_client *client, u8 reg) > +{ > + return i2c_smbus_read_byte_data(client, reg); > +} > + > +static void tw9900_fill_fmt(const struct tw9900_mode *mode, > + struct v4l2_mbus_framefmt *fmt) > +{ > + fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; > + fmt->width = mode->width; > + fmt->height = mode->height; > + fmt->field = mode->field; > + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; > +} > + > +static int tw9900_cfg_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_format *fmt) > +{ > + struct tw9900 *tw9900 = to_tw9900(sd); > + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; > + > + tw9900_fill_fmt(tw9900->cur_mode, mbus_fmt); > + > + return 0; > +} > + > +static int tw9900_enum_mbus_code(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_mbus_code_enum *code) > +{ > + if (code->index >= 1) > + return -EINVAL; > + > + code->code = MEDIA_BUS_FMT_UYVY8_2X8; > + > + return 0; > +} > + > +static int tw9900_power_on(struct tw9900 *tw9900) > +{ > + int ret; > + struct device *dev = &tw9900->client->dev; > + > + if (tw9900->reset_gpio) > + gpiod_set_value_cansleep(tw9900->reset_gpio, 1); > + > + ret = regulator_enable(tw9900->regulator); > + if (ret < 0) > + goto error; > + > + usleep_range(50000, 52000); > + > + if (tw9900->reset_gpio) > + gpiod_set_value_cansleep(tw9900->reset_gpio, 0); > + > + usleep_range(1000, 2000); > + > + ret = tw9900_write_array(tw9900->client, tw9900_init_regs, > + ARRAY_SIZE(tw9900_init_regs)); > + if (ret) { > + dev_err(dev, "Failed to init tw9900\n"); > + goto error; > + } > + > + return 0; > + > +error: > + > + return ret; > +} > + > +static void tw9900_power_off(struct tw9900 *tw9900) > +{ > + if (tw9900->reset_gpio) > + gpiod_set_value_cansleep(tw9900->reset_gpio, 1); > + > + regulator_disable(tw9900->regulator); > +} > + > +static int tw9900_s_ctrl(struct v4l2_ctrl *ctrl) > +{ > + struct tw9900 *tw9900 = container_of(ctrl->handler, struct tw9900, hdl); > + > + if (pm_runtime_suspended(&tw9900->client->dev)) > + return 0; > + > + switch (ctrl->id) { > + case V4L2_CID_BRIGHTNESS: > + tw9900_write_reg(tw9900->client, 0x10, (u8)ctrl->val); > + break; > + case V4L2_CID_CONTRAST: > + tw9900_write_reg(tw9900->client, 0x11, (u8)ctrl->val); > + break; > + default: > + return -EINVAL; > + } > + return 0; > +} > + > +static int tw9900_s_stream(struct v4l2_subdev *sd, int on) > +{ > + struct tw9900 *tw9900 = to_tw9900(sd); > + struct i2c_client *client = tw9900->client; > + int ret = 0; > + > + on = !!on; > + if (on == tw9900->streaming) > + return 0; > + > + if (on) { > + ret = pm_runtime_get_sync(&tw9900->client->dev); > + if (ret < 0) { > + pm_runtime_put_noidle(&client->dev); > + return ret; > + } > + > + ret = v4l2_ctrl_handler_setup(sd->ctrl_handler); > + if (ret) > + goto put_and_return; > + > + ret = tw9900_write_array(tw9900->client, > + tw9900->cur_mode->reg_list, > + tw9900->cur_mode->n_regs); > + if (ret) > + goto put_and_return; > + > + ret = tw9900_write_reg(client, TW9900_REG_OUT_FMT_CTL, > + TW9900_REG_OUT_FMT_CTL_STREAMING); > + if (ret) > + goto put_and_return; > + > + } else { > + tw9900_write_reg(client, TW9900_REG_OUT_FMT_CTL, > + TW9900_REG_OUT_FMT_CTL_STANDBY); > + pm_runtime_put(&client->dev); > + } > + > + tw9900->streaming = on; > + > + return ret; > + > +put_and_return: > + pm_runtime_put(&client->dev); > + > + return ret; > +} > + > +static int tw9900_runtime_resume(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct tw9900 *tw9900 = to_tw9900(sd); > + > + return tw9900_power_on(tw9900); > +} > + > +static int tw9900_runtime_suspend(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct tw9900 *tw9900 = to_tw9900(sd); > + > + tw9900_power_off(tw9900); > + > + return 0; > +} > + > +static int tw9900_subscribe_event(struct v4l2_subdev *sd, > + struct v4l2_fh *fh, > + struct v4l2_event_subscription *sub) > +{ > + switch (sub->type) { > + case V4L2_EVENT_SOURCE_CHANGE: > + return v4l2_src_change_event_subdev_subscribe(sd, fh, sub); > + case V4L2_EVENT_CTRL: > + return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub); > + default: > + return -EINVAL; > + } > +} > + > +static const struct tw9900_mode *tw9900_get_mode_from_std(v4l2_std_id std) > +{ > + int i; > + > + for (i = 0; i < ARRAY_SIZE(supported_modes); i++) > + if (supported_modes[i].std == std) v4l2_std_id is a bit mask, so use & instead of ==. > + return &supported_modes[i]; > + > + return NULL; > +} > + > +static int tw9900_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) > +{ > + struct tw9900 *tw9900 = to_tw9900(sd); > + const struct tw9900_mode *mode; > + int ret; > + > + if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL))) > + return -EINVAL; > + > + mode = tw9900_get_mode_from_std(norm); > + if (!mode) > + return -EINVAL; > + > + ret = tw9900_write_array(tw9900->client, mode->reg_list, mode->n_regs); > + if (ret) > + return ret; > + > + tw9900->cur_mode = mode; > + > + return 0; > +} > + > + > +static unsigned int tw9900_get_stream_std(struct tw9900 *tw9900) > +{ > + u8 std, val; > + > + /* proper #define */ > + val = tw9900_read_reg(tw9900->client, TW9900_REG_STD_SEL); > + std = (val & 0x70) >> 4; > + > + switch (std) { > + Spurious empty line. > + case TW9900_STD_NTSC_M: > + return V4L2_STD_NTSC; > + case TW9900_STD_PAL_BDGHI: > + return V4L2_STD_PAL; > + case TW9900_STD_SECAM: > + return V4L2_STD_SECAM; Does this mean that SECAM is also supported? > + case TW9900_STD_NTSC_4_43: > + return V4L2_STD_NTSC; This should return NTSC_443. See also the comment below. > + case TW9900_STD_PAL_M: > + case TW9900_STD_PAL_CN: > + case TW9900_STD_PAL_60: > + return V4L2_STD_PAL; These also have their own STD_PAL_ variant. I don't really like that this is returning STD_PAL when it is really a different non-standard PAL variant. Either the driver must have full support for these variants, and g_tvnorms reports that, or just fall into the default case and return STD_UNKNOWN. > + case TW9900_STD_AUTO: > + return V4L2_STD_UNKNOWN; > + default: > + return V4L2_STD_UNKNOWN; > + > + } > + return V4L2_STD_UNKNOWN; > +} > + > +static int tw9900_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) > +{ > + struct tw9900 *tw9900 = to_tw9900(sd); > + > + *std = tw9900->cur_mode->std; > + > + return 0; > +} > + > +static void tw9900_start_autodetect(struct tw9900 *tw9900) > +{ > + tw9900_write_reg(tw9900->client, TW9900_REG_STDR, > + BIT(TW9900_STD_NTSC_M) | BIT(TW9900_STD_PAL_BDGHI)); > + > + tw9900_write_reg(tw9900->client, TW9900_REG_STD_SEL, TW9900_STD_AUTO); > + > + tw9900_write_reg(tw9900->client, TW9900_REG_STDR, > + BIT(TW9900_STD_NTSC_M) | BIT(TW9900_STD_PAL_BDGHI) | > + BIT(TW9900_STD_AUTO)); > + > + /* Autodetect takes a while to start, and during the starting sequence > + * the autodetection status is reported as done. > + */ > + msleep(30); > +} > + > +static int tw9900_cancel_autodetect(struct tw9900 *tw9900) > +{ > + return tw9900_s_std(&tw9900->subdev, tw9900->cur_mode->std); > +} > + > +static bool tw9900_detect_done(struct tw9900 *tw9900) > +{ > + u8 val = tw9900_read_reg(tw9900->client, TW9900_REG_STD_SEL); > + > + return !(val & TW9900_REG_STD_SEL_AUTODETECT_IN_PROGRESS); > +} > + > +static int tw9900_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) > +{ > + struct tw9900 *tw9900 = to_tw9900(sd); > + int i; > + > + if (tw9900->streaming) > + return -EBUSY; > + > + tw9900_start_autodetect(tw9900); > + > + for (i = 0; i < TW9900_VIDEO_POLL_TIMEOUT; i++) { > + if (tw9900_detect_done(tw9900)) > + break; > + > + msleep(20); > + } > + > + if (!tw9900_detect_done(tw9900)) { > + tw9900_cancel_autodetect(tw9900); > + return -EBUSY; > + } > + > + *std = tw9900_get_stream_std(tw9900); > + > + return 0; > +} > + > +static int tw9900_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm) > +{ > + *norm = V4L2_STD_NTSC | V4L2_STD_PAL; > + > + return 0; > +} > + > +static const struct dev_pm_ops tw9900_pm_ops = { > + SET_RUNTIME_PM_OPS(tw9900_runtime_suspend, > + tw9900_runtime_resume, NULL) > +}; > + > +static const struct v4l2_subdev_core_ops tw9900_core_ops = { > + .subscribe_event = tw9900_subscribe_event, > + .unsubscribe_event = v4l2_event_subdev_unsubscribe, > +}; > + > +static const struct v4l2_subdev_video_ops tw9900_video_ops = { > + .s_std = tw9900_s_std, > + .g_std = tw9900_g_std, > + .querystd = tw9900_querystd, > + .g_tvnorms = tw9900_g_tvnorms, > + .s_stream = tw9900_s_stream, > +}; > + > +static const struct v4l2_subdev_pad_ops tw9900_pad_ops = { > + .enum_mbus_code = tw9900_enum_mbus_code, > + .get_fmt = tw9900_cfg_fmt, > + .set_fmt = tw9900_cfg_fmt, > +}; > + > +static const struct v4l2_subdev_ops tw9900_subdev_ops = { > + .core = &tw9900_core_ops, > + .video = &tw9900_video_ops, > + .pad = &tw9900_pad_ops, > +}; > + > +static const struct v4l2_ctrl_ops tw9900_ctrl_ops = { > + .s_ctrl = tw9900_s_ctrl, > +}; > + > +static int tw9900_check_id(struct tw9900 *tw9900, > + struct i2c_client *client) > +{ > + struct device *dev = &tw9900->client->dev; > + u8 id; > + > + id = tw9900_read_reg(client, TW9900_CHIP_ID); > + > + if (id != TW9900_CHIP_ID) { > + dev_err(dev, "Unexpected decoder id(%04x)\n", id); > + return -EINVAL; > + } > + > + dev_info(dev, "Detected TW9900 (%04x) decoder\n", TW9900_CHIP_ID); > + > + return 0; > +} > + > +static int tw9900_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct device *dev = &client->dev; > + struct v4l2_ctrl_handler *hdl; > + struct tw9900 *tw9900; > + int ret = 0; > + > + tw9900 = devm_kzalloc(dev, sizeof(*tw9900), GFP_KERNEL); > + if (!tw9900) > + return -ENOMEM; > + > + tw9900->client = client; > + tw9900->cur_mode = &supported_modes[0]; > + > + tw9900->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(tw9900->reset_gpio)) > + tw9900->reset_gpio = NULL; > + > + tw9900->regulator = devm_regulator_get(&tw9900->client->dev, "vdd"); > + if (IS_ERR(tw9900->regulator)) { > + dev_err(dev, "Failed to get power regulator\n"); > + return ret; > + } > + > + v4l2_i2c_subdev_init(&tw9900->subdev, client, &tw9900_subdev_ops); > + tw9900->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | > + V4L2_SUBDEV_FL_HAS_EVENTS; > + > + hdl = &tw9900->hdl; > + > + v4l2_ctrl_handler_init(hdl, 2); > + > + v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_BRIGHTNESS, > + -128, 127, 1, 0); > + v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_CONTRAST, > + 0, 255, 1, 0x60); > + > + tw9900->subdev.ctrl_handler = hdl; > + if (hdl->error) { > + int err = hdl->error; > + > + v4l2_ctrl_handler_free(hdl); > + return err; > + } > + > + ret = tw9900_power_on(tw9900); > + if (ret) > + return ret; > + > + ret = tw9900_check_id(tw9900, client); > + if (ret) > + goto err_power_off; > + > + tw9900->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > + tw9900->pad.flags = MEDIA_PAD_FL_SOURCE; > + tw9900->subdev.entity.function = MEDIA_ENT_F_DV_DECODER; > + > + ret = media_entity_pads_init(&tw9900->subdev.entity, 1, &tw9900->pad); > + if (ret < 0) > + goto err_power_off; > + > + ret = v4l2_async_register_subdev(&tw9900->subdev); > + if (ret) { > + dev_err(dev, "v4l2 async register subdev failed\n"); > + goto err_clean_entity; > + } > + > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); > + pm_runtime_idle(dev); > + > + return 0; > + > +err_clean_entity: > + media_entity_cleanup(&tw9900->subdev.entity); > +err_power_off: > + tw9900_power_off(tw9900); > + > + return ret; > +} > + > +static int tw9900_remove(struct i2c_client *client) > +{ > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct tw9900 *tw9900 = to_tw9900(sd); > + > + v4l2_async_unregister_subdev(sd); > + media_entity_cleanup(&sd->entity); > + > + pm_runtime_disable(&client->dev); > + if (!pm_runtime_status_suspended(&client->dev)) > + tw9900_power_off(tw9900); > + pm_runtime_set_suspended(&client->dev); > + > + return 0; > +} > + > +static const struct of_device_id tw9900_of_match[] = { > + { .compatible = "techwell,tw9900" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, tw9900_of_match); > + > +static struct i2c_driver tw9900_i2c_driver = { > + .driver = { > + .name = "tw9900", > + .pm = &tw9900_pm_ops, > + .of_match_table = tw9900_of_match > + }, > + .probe = tw9900_probe, > + .remove = tw9900_remove, > +}; > + > +module_i2c_driver(tw9900_i2c_driver); > + > +MODULE_DESCRIPTION("tw9900 decoder driver"); > +MODULE_LICENSE("GPL v2"); > Regards, Hans ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-04-06 13:36 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-04-01 7:07 [PATCH v5 0/3] media: i2c: Introduce driver for the TW9900 decoder Maxime Chevallier 2021-04-01 7:08 ` [PATCH v5 1/3] dt-bindings: vendor-prefixes: Add techwell vendor prefix Maxime Chevallier 2021-04-01 7:08 ` [PATCH v5 2/3] media: dt-bindings: media: i2c: Add bindings for TW9900 Maxime Chevallier 2021-04-01 16:37 ` Rob Herring 2021-04-01 7:08 ` [PATCH v5 3/3] media: i2c: Introduce a driver for the Techwell TW9900 decoder Maxime Chevallier 2021-04-06 13:36 ` Hans Verkuil
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).