* [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0
@ 2021-04-15 13:03 Andy Shevchenko
2021-04-19 10:04 ` Andy Shevchenko
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Andy Shevchenko @ 2021-04-15 13:03 UTC (permalink / raw)
To: Andy Shevchenko, Linus Walleij, linux-gpio, linux-kernel; +Cc: Drew Fustini
The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
enabled GPIO pin number and label in debugfs for pin controller. However,
it limited that feature to the chips where base is positive number. This,
in particular, excluded chips where base is 0 for the historical or backward
compatibility reasons. Refactor the code to include the latter as well.
Fixes: f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
Cc: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/pinctrl/core.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index df7f5f049139..8ef24af88b75 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1604,8 +1604,8 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
unsigned i, pin;
#ifdef CONFIG_GPIOLIB
struct pinctrl_gpio_range *range;
- unsigned int gpio_num;
struct gpio_chip *chip;
+ int gpio_num;
#endif
seq_printf(s, "registered pins: %d\n", pctldev->desc->npins);
@@ -1625,7 +1625,7 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
seq_printf(s, "pin %d (%s) ", pin, desc->name);
#ifdef CONFIG_GPIOLIB
- gpio_num = 0;
+ gpio_num = -1;
list_for_each_entry(range, &pctldev->gpio_ranges, node) {
if ((pin >= range->pin_base) &&
(pin < (range->pin_base + range->npins))) {
@@ -1633,10 +1633,12 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
break;
}
}
- chip = gpio_to_chip(gpio_num);
- if (chip && chip->gpiodev && chip->gpiodev->base)
- seq_printf(s, "%u:%s ", gpio_num -
- chip->gpiodev->base, chip->label);
+ if (gpio_num >= 0)
+ chip = gpio_to_chip(gpio_num);
+ else
+ chip = NULL;
+ if (chip)
+ seq_printf(s, "%u:%s ", gpio_num - chip->gpiodev->base, chip->label);
else
seq_puts(s, "0:? ");
#endif
--
2.30.2
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0
2021-04-15 13:03 [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0 Andy Shevchenko
@ 2021-04-19 10:04 ` Andy Shevchenko
2021-04-19 16:58 ` Drew Fustini
2021-04-20 7:32 ` Drew Fustini
2021-04-22 0:14 ` Linus Walleij
2 siblings, 1 reply; 6+ messages in thread
From: Andy Shevchenko @ 2021-04-19 10:04 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Linus Walleij, open list:GPIO SUBSYSTEM,
Linux Kernel Mailing List, Drew Fustini
On Thu, Apr 15, 2021 at 4:07 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
> enabled GPIO pin number and label in debugfs for pin controller. However,
> it limited that feature to the chips where the base is a positive number. This,
> in particular, excluded chips where base is 0 for the historical or backward
> compatibility reasons. Refactor the code to include the latter as well.
Linus, since we got one more week, can you consider applying this one
and the other one against kernel doc for the final release?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0
2021-04-19 10:04 ` Andy Shevchenko
@ 2021-04-19 16:58 ` Drew Fustini
0 siblings, 0 replies; 6+ messages in thread
From: Drew Fustini @ 2021-04-19 16:58 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Andy Shevchenko, Linus Walleij, open list:GPIO SUBSYSTEM,
Linux Kernel Mailing List
On Mon, Apr 19, 2021 at 3:04 AM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Thu, Apr 15, 2021 at 4:07 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> >
> > The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
> > enabled GPIO pin number and label in debugfs for pin controller. However,
> > it limited that feature to the chips where the base is a positive number. This,
> > in particular, excluded chips where base is 0 for the historical or backward
> > compatibility reasons. Refactor the code to include the latter as well.
>
> Linus, since we got one more week, can you consider applying this one
> and the other one against kernel doc for the final release?
Thank you for the reminder. I will test today.
-Drew
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0
2021-04-15 13:03 [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0 Andy Shevchenko
2021-04-19 10:04 ` Andy Shevchenko
@ 2021-04-20 7:32 ` Drew Fustini
2021-04-20 10:10 ` Andy Shevchenko
2021-04-22 0:14 ` Linus Walleij
2 siblings, 1 reply; 6+ messages in thread
From: Drew Fustini @ 2021-04-20 7:32 UTC (permalink / raw)
To: Andy Shevchenko; +Cc: Linus Walleij, linux-gpio, linux-kernel
On Thu, Apr 15, 2021 at 04:03:56PM +0300, Andy Shevchenko wrote:
> The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
> enabled GPIO pin number and label in debugfs for pin controller. However,
> it limited that feature to the chips where base is positive number. This,
> in particular, excluded chips where base is 0 for the historical or backward
> compatibility reasons. Refactor the code to include the latter as well.
>
> Fixes: f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
> Cc: Drew Fustini <drew@beagleboard.org>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/pinctrl/core.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
> index df7f5f049139..8ef24af88b75 100644
> --- a/drivers/pinctrl/core.c
> +++ b/drivers/pinctrl/core.c
> @@ -1604,8 +1604,8 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
> unsigned i, pin;
> #ifdef CONFIG_GPIOLIB
> struct pinctrl_gpio_range *range;
> - unsigned int gpio_num;
> struct gpio_chip *chip;
> + int gpio_num;
> #endif
>
> seq_printf(s, "registered pins: %d\n", pctldev->desc->npins);
> @@ -1625,7 +1625,7 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
> seq_printf(s, "pin %d (%s) ", pin, desc->name);
>
> #ifdef CONFIG_GPIOLIB
> - gpio_num = 0;
> + gpio_num = -1;
> list_for_each_entry(range, &pctldev->gpio_ranges, node) {
> if ((pin >= range->pin_base) &&
> (pin < (range->pin_base + range->npins))) {
> @@ -1633,10 +1633,12 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
> break;
> }
> }
> - chip = gpio_to_chip(gpio_num);
> - if (chip && chip->gpiodev && chip->gpiodev->base)
> - seq_printf(s, "%u:%s ", gpio_num -
> - chip->gpiodev->base, chip->label);
> + if (gpio_num >= 0)
> + chip = gpio_to_chip(gpio_num);
> + else
> + chip = NULL;
> + if (chip)
> + seq_printf(s, "%u:%s ", gpio_num - chip->gpiodev->base, chip->label);
> else
> seq_puts(s, "0:? ");
> #endif
> --
> 2.30.2
Thank you, this makes sense to me. I had failed to consider what would
happen when chip->gpiodev->base == 0. I have tested on the BeagleBone
(AM3358) and the output works as expected.
/sys/kernel/debug/pinctrl/44e10800.pinmux-pinctrl-single# more pins
registered pins: 142
pin 0 (PIN0) 0:gpio-0-31 44e10800 00000027 pinctrl-single
pin 1 (PIN1) 1:gpio-0-31 44e10804 00000027 pinctrl-single
pin 2 (PIN2) 2:gpio-0-31 44e10808 00000027 pinctrl-single
pin 3 (PIN3) 3:gpio-0-31 44e1080c 00000027 pinctrl-single
pin 4 (PIN4) 4:gpio-0-31 44e10810 00000027 pinctrl-single
pin 5 (PIN5) 5:gpio-0-31 44e10814 00000027 pinctrl-single
pin 6 (PIN6) 6:gpio-0-31 44e10818 00000027 pinctrl-single
pin 7 (PIN7) 7:gpio-0-31 44e1081c 00000027 pinctrl-single
pin 8 (PIN8) 22:gpio-96-127 44e10820 00000027 pinctrl-single
pin 9 (PIN9) 23:gpio-96-127 44e10824 00000037 pinctrl-single
pin 10 (PIN10) 26:gpio-96-127 44e10828 00000037 pinctrl-single
pin 11 (PIN11) 27:gpio-96-127 44e1082c 00000037 pinctrl-single
pin 12 (PIN12) 12:gpio-0-31 44e10830 00000037 pinctrl-single
pin 13 (PIN13) 13:gpio-0-31 44e10834 00000037 pinctrl-single
pin 14 (PIN14) 14:gpio-0-31 44e10838 00000037 pinctrl-single
pin 15 (PIN15) 15:gpio-0-31 44e1083c 00000037 pinctrl-single
pin 16 (PIN16) 16:gpio-0-31 44e10840 00000027 pinctrl-single
<snip>
Tested-by: Drew Fustini <drew@beagleboard.org>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0
2021-04-20 7:32 ` Drew Fustini
@ 2021-04-20 10:10 ` Andy Shevchenko
0 siblings, 0 replies; 6+ messages in thread
From: Andy Shevchenko @ 2021-04-20 10:10 UTC (permalink / raw)
To: Drew Fustini; +Cc: Linus Walleij, linux-gpio, linux-kernel
On Tue, Apr 20, 2021 at 12:32:18AM -0700, Drew Fustini wrote:
> On Thu, Apr 15, 2021 at 04:03:56PM +0300, Andy Shevchenko wrote:
> > The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
> > enabled GPIO pin number and label in debugfs for pin controller. However,
> > it limited that feature to the chips where base is positive number. This,
> > in particular, excluded chips where base is 0 for the historical or backward
> > compatibility reasons. Refactor the code to include the latter as well.
...
> > - chip = gpio_to_chip(gpio_num);
> > - if (chip && chip->gpiodev && chip->gpiodev->base)
> > - seq_printf(s, "%u:%s ", gpio_num -
> > - chip->gpiodev->base, chip->label);
> > + if (gpio_num >= 0)
> > + chip = gpio_to_chip(gpio_num);
> > + else
> > + chip = NULL;
> > + if (chip)
> > + seq_printf(s, "%u:%s ", gpio_num - chip->gpiodev->base, chip->label);
> > else
> > seq_puts(s, "0:? ");
> Thank you, this makes sense to me. I had failed to consider what would
> happen when chip->gpiodev->base == 0.
If gpiodev->base == 0 it can happen only when
1) either base is 0 by the driver request
2) or it's a GPIO device which fits the (last) free slot in the number space
It can't be negative at all. So, it means whatever value is there it is always
valid.
> I have tested on the BeagleBone
> (AM3358) and the output works as expected.
Cool!
> /sys/kernel/debug/pinctrl/44e10800.pinmux-pinctrl-single# more pins
> registered pins: 142
> pin 0 (PIN0) 0:gpio-0-31 44e10800 00000027 pinctrl-single
> pin 1 (PIN1) 1:gpio-0-31 44e10804 00000027 pinctrl-single
> pin 2 (PIN2) 2:gpio-0-31 44e10808 00000027 pinctrl-single
> pin 3 (PIN3) 3:gpio-0-31 44e1080c 00000027 pinctrl-single
> pin 4 (PIN4) 4:gpio-0-31 44e10810 00000027 pinctrl-single
> pin 5 (PIN5) 5:gpio-0-31 44e10814 00000027 pinctrl-single
> pin 6 (PIN6) 6:gpio-0-31 44e10818 00000027 pinctrl-single
> pin 7 (PIN7) 7:gpio-0-31 44e1081c 00000027 pinctrl-single
> pin 8 (PIN8) 22:gpio-96-127 44e10820 00000027 pinctrl-single
> pin 9 (PIN9) 23:gpio-96-127 44e10824 00000037 pinctrl-single
> pin 10 (PIN10) 26:gpio-96-127 44e10828 00000037 pinctrl-single
> pin 11 (PIN11) 27:gpio-96-127 44e1082c 00000037 pinctrl-single
> pin 12 (PIN12) 12:gpio-0-31 44e10830 00000037 pinctrl-single
> pin 13 (PIN13) 13:gpio-0-31 44e10834 00000037 pinctrl-single
> pin 14 (PIN14) 14:gpio-0-31 44e10838 00000037 pinctrl-single
> pin 15 (PIN15) 15:gpio-0-31 44e1083c 00000037 pinctrl-single
> pin 16 (PIN16) 16:gpio-0-31 44e10840 00000027 pinctrl-single
> <snip>
>
> Tested-by: Drew Fustini <drew@beagleboard.org>
> Reviewed-by: Drew Fustini <drew@beagleboard.org>
Thank you!
Linus, can it be applied now?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0
2021-04-15 13:03 [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0 Andy Shevchenko
2021-04-19 10:04 ` Andy Shevchenko
2021-04-20 7:32 ` Drew Fustini
@ 2021-04-22 0:14 ` Linus Walleij
2 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2021-04-22 0:14 UTC (permalink / raw)
To: Andy Shevchenko; +Cc: open list:GPIO SUBSYSTEM, linux-kernel, Drew Fustini
On Thu, Apr 15, 2021 at 3:05 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
> The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
> enabled GPIO pin number and label in debugfs for pin controller. However,
> it limited that feature to the chips where base is positive number. This,
> in particular, excluded chips where base is 0 for the historical or backward
> compatibility reasons. Refactor the code to include the latter as well.
>
> Fixes: f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
> Cc: Drew Fustini <drew@beagleboard.org>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Patch applied for fixes!
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-04-22 0:14 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-15 13:03 [PATCH v1 1/1] pinctrl: core: Show pin numbers for the controllers with base = 0 Andy Shevchenko
2021-04-19 10:04 ` Andy Shevchenko
2021-04-19 16:58 ` Drew Fustini
2021-04-20 7:32 ` Drew Fustini
2021-04-20 10:10 ` Andy Shevchenko
2021-04-22 0:14 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).