[PATCH v5 0/4] close various race windows for swap

[PATCH v5 0/4] close various race windows for swap

[Miaohe Lin]

Hi all,
When I was investigating the swap code, I found some possible race
windows. This series aims to fix all these races. But using current
get/put_swap_device() to guard against concurrent swapoff for
swap_readpage() looks terrible because swap_readpage() may take really
long time. And to reduce the performance overhead on the hot-path as
much as possible, it appears we can use the percpu_ref to close this
race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref
support for swap and most of the remaining patches try to use this to
close various race windows. More details can be found in the respective
changelogs. Thanks!

v4->v5:
  collect Reviewed-by tag
  do put_swap_device() before returning from the function per Huang, Ying

v3->v4:
  some commit log and comment enhance per Huang, Ying
  put get/put_swap_device() in shmem_swapin_page() per Huang, Ying
  collect Reviewed-by tag

v2->v3:
  some commit log and comment enhance per Huang, Ying
  remove ref_initialized field
  squash PATCH 1-2

v1->v2:
  reorganize the patch-2/5
  various enhance and fixup per Huang, Ying
  Many thanks for the comments of Huang, Ying, Dennis Zhou and Tim Chen.

Miaohe Lin (4):
  mm/swapfile: use percpu_ref to serialize against concurrent swapoff
  swap: fix do_swap_page() race with swapoff
  mm/swap: remove confusing checking for non_swap_entry() in
    swap_ra_info()
  mm/shmem: fix shmem_swapin() race with swapoff

 include/linux/swap.h | 14 ++++++--
 mm/memory.c          | 11 ++++--
 mm/shmem.c           | 12 +++++++
 mm/swap_state.c      |  6 ----
 mm/swapfile.c        | 79 +++++++++++++++++++++++++++-----------------
 5 files changed, 82 insertions(+), 40 deletions(-)

-- 
2.23.0

[PATCH v5 1/4] mm/swapfile: use percpu_ref to serialize against concurrent swapoff

[Miaohe Lin]

Using current get/put_swap_device() to guard against concurrent swapoff
for some swap ops, e.g. swap_readpage(), looks terrible because they
might take really long time. This patch adds the percpu_ref support to
serialize against concurrent swapoff(as suggested by Huang, Ying). Also
we remove the SWP_VALID flag because it's used together with RCU solution.

Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
---
 include/linux/swap.h |  5 +--
 mm/swapfile.c        | 79 +++++++++++++++++++++++++++-----------------
 2 files changed, 52 insertions(+), 32 deletions(-)

diff --git a/include/linux/swap.h b/include/linux/swap.h
index 144727041e78..c9e7fea10b83 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -177,7 +177,6 @@ enum {
 	SWP_PAGE_DISCARD = (1 << 10),	/* freed swap page-cluster discards */
 	SWP_STABLE_WRITES = (1 << 11),	/* no overwrite PG_writeback pages */
 	SWP_SYNCHRONOUS_IO = (1 << 12),	/* synchronous IO is efficient */
-	SWP_VALID	= (1 << 13),	/* swap is valid to be operated on? */
 					/* add others here before... */
 	SWP_SCANNING	= (1 << 14),	/* refcount in scan_swap_map */
 };
@@ -240,6 +239,7 @@ struct swap_cluster_list {
  * The in-memory structure used to track swap areas.
  */
 struct swap_info_struct {
+	struct percpu_ref users;	/* indicate and keep swap device valid. */
 	unsigned long	flags;		/* SWP_USED etc: see above */
 	signed short	prio;		/* swap priority of this type */
 	struct plist_node list;		/* entry in swap_active_head */
@@ -260,6 +260,7 @@ struct swap_info_struct {
 	struct block_device *bdev;	/* swap device or bdev of swap file */
 	struct file *swap_file;		/* seldom referenced */
 	unsigned int old_block_size;	/* seldom referenced */
+	struct completion comp;		/* seldom referenced */
 #ifdef CONFIG_FRONTSWAP
 	unsigned long *frontswap_map;	/* frontswap in-use, one bit per page */
 	atomic_t frontswap_pages;	/* frontswap pages in-use counter */
@@ -511,7 +512,7 @@ sector_t swap_page_sector(struct page *page);
 
 static inline void put_swap_device(struct swap_info_struct *si)
 {
-	rcu_read_unlock();
+	percpu_ref_put(&si->users);
 }
 
 #else /* CONFIG_SWAP */
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 149e77454e3c..2aad85751991 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -39,6 +39,7 @@
 #include <linux/export.h>
 #include <linux/swap_slots.h>
 #include <linux/sort.h>
+#include <linux/completion.h>
 
 #include <asm/tlbflush.h>
 #include <linux/swapops.h>
@@ -511,6 +512,14 @@ static void swap_discard_work(struct work_struct *work)
 	spin_unlock(&si->lock);
 }
 
+static void swap_users_ref_free(struct percpu_ref *ref)
+{
+	struct swap_info_struct *si;
+
+	si = container_of(ref, struct swap_info_struct, users);
+	complete(&si->comp);
+}
+
 static void alloc_cluster(struct swap_info_struct *si, unsigned long idx)
 {
 	struct swap_cluster_info *ci = si->cluster_info;
@@ -1270,18 +1279,12 @@ static unsigned char __swap_entry_free_locked(struct swap_info_struct *p,
  * via preventing the swap device from being swapoff, until
  * put_swap_device() is called.  Otherwise return NULL.
  *
- * The entirety of the RCU read critical section must come before the
- * return from or after the call to synchronize_rcu() in
- * enable_swap_info() or swapoff().  So if "si->flags & SWP_VALID" is
- * true, the si->map, si->cluster_info, etc. must be valid in the
- * critical section.
- *
  * Notice that swapoff or swapoff+swapon can still happen before the
- * rcu_read_lock() in get_swap_device() or after the rcu_read_unlock()
- * in put_swap_device() if there isn't any other way to prevent
- * swapoff, such as page lock, page table lock, etc.  The caller must
- * be prepared for that.  For example, the following situation is
- * possible.
+ * percpu_ref_tryget_live() in get_swap_device() or after the
+ * percpu_ref_put() in put_swap_device() if there isn't any other way
+ * to prevent swapoff, such as page lock, page table lock, etc.  The
+ * caller must be prepared for that.  For example, the following
+ * situation is possible.
  *
  *   CPU1				CPU2
  *   do_swap_page()
@@ -1309,21 +1312,27 @@ struct swap_info_struct *get_swap_device(swp_entry_t entry)
 	si = swp_swap_info(entry);
 	if (!si)
 		goto bad_nofile;
-
-	rcu_read_lock();
-	if (data_race(!(si->flags & SWP_VALID)))
-		goto unlock_out;
+	if (!percpu_ref_tryget_live(&si->users))
+		goto out;
+	/*
+	 * Guarantee the si->users are checked before accessing other
+	 * fields of swap_info_struct.
+	 *
+	 * Paired with the spin_unlock() after setup_swap_info() in
+	 * enable_swap_info().
+	 */
+	smp_rmb();
 	offset = swp_offset(entry);
 	if (offset >= si->max)
-		goto unlock_out;
+		goto put_out;
 
 	return si;
 bad_nofile:
 	pr_err("%s: %s%08lx\n", __func__, Bad_file, entry.val);
 out:
 	return NULL;
-unlock_out:
-	rcu_read_unlock();
+put_out:
+	percpu_ref_put(&si->users);
 	return NULL;
 }
 
@@ -2466,7 +2475,7 @@ static void setup_swap_info(struct swap_info_struct *p, int prio,
 
 static void _enable_swap_info(struct swap_info_struct *p)
 {
-	p->flags |= SWP_WRITEOK | SWP_VALID;
+	p->flags |= SWP_WRITEOK;
 	atomic_long_add(p->pages, &nr_swap_pages);
 	total_swap_pages += p->pages;
 
@@ -2497,10 +2506,9 @@ static void enable_swap_info(struct swap_info_struct *p, int prio,
 	spin_unlock(&p->lock);
 	spin_unlock(&swap_lock);
 	/*
-	 * Guarantee swap_map, cluster_info, etc. fields are valid
-	 * between get/put_swap_device() if SWP_VALID bit is set
+	 * Finished initializing swap device, now it's safe to reference it.
 	 */
-	synchronize_rcu();
+	percpu_ref_resurrect(&p->users);
 	spin_lock(&swap_lock);
 	spin_lock(&p->lock);
 	_enable_swap_info(p);
@@ -2616,16 +2624,16 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
 
 	reenable_swap_slots_cache_unlock();
 
-	spin_lock(&swap_lock);
-	spin_lock(&p->lock);
-	p->flags &= ~SWP_VALID;		/* mark swap device as invalid */
-	spin_unlock(&p->lock);
-	spin_unlock(&swap_lock);
 	/*
-	 * wait for swap operations protected by get/put_swap_device()
-	 * to complete
+	 * Wait for swap operations protected by get/put_swap_device()
+	 * to complete.
+	 *
+	 * We need synchronize_rcu() here to protect the accessing to
+	 * the swap cache data structure.
 	 */
+	percpu_ref_kill(&p->users);
 	synchronize_rcu();
+	wait_for_completion(&p->comp);
 
 	flush_work(&p->discard_work);
 
@@ -2857,6 +2865,12 @@ static struct swap_info_struct *alloc_swap_info(void)
 	if (!p)
 		return ERR_PTR(-ENOMEM);
 
+	if (percpu_ref_init(&p->users, swap_users_ref_free,
+			    PERCPU_REF_INIT_DEAD, GFP_KERNEL)) {
+		kvfree(p);
+		return ERR_PTR(-ENOMEM);
+	}
+
 	spin_lock(&swap_lock);
 	for (type = 0; type < nr_swapfiles; type++) {
 		if (!(swap_info[type]->flags & SWP_USED))
@@ -2864,6 +2878,7 @@ static struct swap_info_struct *alloc_swap_info(void)
 	}
 	if (type >= MAX_SWAPFILES) {
 		spin_unlock(&swap_lock);
+		percpu_ref_exit(&p->users);
 		kvfree(p);
 		return ERR_PTR(-EPERM);
 	}
@@ -2891,9 +2906,13 @@ static struct swap_info_struct *alloc_swap_info(void)
 		plist_node_init(&p->avail_lists[i], 0);
 	p->flags = SWP_USED;
 	spin_unlock(&swap_lock);
-	kvfree(defer);
+	if (defer) {
+		percpu_ref_exit(&defer->users);
+		kvfree(defer);
+	}
 	spin_lock_init(&p->lock);
 	spin_lock_init(&p->cont_lock);
+	init_completion(&p->comp);
 
 	return p;
 }
-- 
2.23.0

[PATCH v5 2/4] swap: fix do_swap_page() race with swapoff

[Miaohe Lin]

When I was investigating the swap code, I found the below possible race
window:

CPU 1                                   	CPU 2
-----                                   	-----
do_swap_page
  if (data_race(si->flags & SWP_SYNCHRONOUS_IO)
  swap_readpage
    if (data_race(sis->flags & SWP_FS_OPS)) {
                                        	swapoff
					  	  ..
					  	  p->swap_file = NULL;
					  	  ..
    struct file *swap_file = sis->swap_file;
    struct address_space *mapping = swap_file->f_mapping;[oops!]

Note that for the pages that are swapped in through swap cache, this isn't
an issue. Because the page is locked, and the swap entry will be marked
with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been
unlocked.

Fix this race by using get/put_swap_device() to guard against concurrent
swapoff.

Fixes: 0bcac06f27d7 ("mm,swap: skip swapcache for swapin of synchronous device")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
---
 include/linux/swap.h |  9 +++++++++
 mm/memory.c          | 11 +++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/include/linux/swap.h b/include/linux/swap.h
index c9e7fea10b83..46d51d058d05 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -527,6 +527,15 @@ static inline struct swap_info_struct *swp_swap_info(swp_entry_t entry)
 	return NULL;
 }
 
+static inline struct swap_info_struct *get_swap_device(swp_entry_t entry)
+{
+	return NULL;
+}
+
+static inline void put_swap_device(struct swap_info_struct *si)
+{
+}
+
 #define swap_address_space(entry)		(NULL)
 #define get_nr_swap_pages()			0L
 #define total_swap_pages			0L
diff --git a/mm/memory.c b/mm/memory.c
index 27014c3bde9f..39c910678387 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3311,6 +3311,7 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 {
 	struct vm_area_struct *vma = vmf->vma;
 	struct page *page = NULL, *swapcache;
+	struct swap_info_struct *si = NULL;
 	swp_entry_t entry;
 	pte_t pte;
 	int locked;
@@ -3338,14 +3339,16 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 		goto out;
 	}
 
+	/* Prevent swapoff from happening to us. */
+	si = get_swap_device(entry);
+	if (unlikely(!si))
+		goto out;
 
 	delayacct_set_flag(current, DELAYACCT_PF_SWAPIN);
 	page = lookup_swap_cache(entry, vma, vmf->address);
 	swapcache = page;
 
 	if (!page) {
-		struct swap_info_struct *si = swp_swap_info(entry);
-
 		if (data_race(si->flags & SWP_SYNCHRONOUS_IO) &&
 		    __swap_count(entry) == 1) {
 			/* skip swapcache */
@@ -3514,6 +3517,8 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 unlock:
 	pte_unmap_unlock(vmf->pte, vmf->ptl);
 out:
+	if (si)
+		put_swap_device(si);
 	return ret;
 out_nomap:
 	pte_unmap_unlock(vmf->pte, vmf->ptl);
@@ -3525,6 +3530,8 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
 		unlock_page(swapcache);
 		put_page(swapcache);
 	}
+	if (si)
+		put_swap_device(si);
 	return ret;
 }
 
-- 
2.23.0

[PATCH v5 3/4] mm/swap: remove confusing checking for non_swap_entry() in swap_ra_info()

[Miaohe Lin]

The non_swap_entry() was used for working with VMA based swap readahead
via commit ec560175c0b6 ("mm, swap: VMA based swap readahead"). At that
time, the non_swap_entry() checking is necessary because the function is
called before checking that in do_swap_page(). Then it's moved to
swap_ra_info() since commit eaf649ebc3ac ("mm: swap: clean up swap
readahead"). After that, the non_swap_entry() checking is unnecessary,
because swap_ra_info() is called after non_swap_entry() has been checked
already. The resulting code is confusing as the non_swap_entry() check
looks racy now because while we released the pte lock, somebody else might
have faulted in this pte. So we should check whether it's swap pte first
to guard against such race or swap_type will be unexpected. But the race
isn't important because it will not cause problem. We would have enough
checking when we really operate the PTE entries later. So we remove the
non_swap_entry() check here to avoid confusion.

Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
---
 mm/swap_state.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/mm/swap_state.c b/mm/swap_state.c
index 272ea2108c9d..df5405384520 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -721,7 +721,6 @@ static void swap_ra_info(struct vm_fault *vmf,
 {
 	struct vm_area_struct *vma = vmf->vma;
 	unsigned long ra_val;
-	swp_entry_t entry;
 	unsigned long faddr, pfn, fpfn;
 	unsigned long start, end;
 	pte_t *pte, *orig_pte;
@@ -739,11 +738,6 @@ static void swap_ra_info(struct vm_fault *vmf,
 
 	faddr = vmf->address;
 	orig_pte = pte = pte_offset_map(vmf->pmd, faddr);
-	entry = pte_to_swp_entry(*pte);
-	if ((unlikely(non_swap_entry(entry)))) {
-		pte_unmap(orig_pte);
-		return;
-	}
 
 	fpfn = PFN_DOWN(faddr);
 	ra_val = GET_SWAP_RA_VAL(vma);
-- 
2.23.0

[PATCH v5 4/4] mm/shmem: fix shmem_swapin() race with swapoff

[Miaohe Lin]

When I was investigating the swap code, I found the below possible race
window:

CPU 1                                         CPU 2
-----                                         -----
shmem_swapin
  swap_cluster_readahead
    if (likely(si->flags & (SWP_BLKDEV | SWP_FS_OPS))) {
                                              swapoff
                                                ..
                                                si->swap_file = NULL;
                                                ..
    struct inode *inode = si->swap_file->f_mapping->host;[oops!]

Close this race window by using get/put_swap_device() to guard against
concurrent swapoff.

Fixes: 8fd2e0b505d1 ("mm: swap: check if swap backing device is congested or not")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
---
 mm/shmem.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/mm/shmem.c b/mm/shmem.c
index 26c76b13ad23..2dafd65b0b42 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1696,6 +1696,7 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
 	struct address_space *mapping = inode->i_mapping;
 	struct shmem_inode_info *info = SHMEM_I(inode);
 	struct mm_struct *charge_mm = vma ? vma->vm_mm : current->mm;
+	struct swap_info_struct *si;
 	struct page *page;
 	swp_entry_t swap;
 	int error;
@@ -1704,6 +1705,12 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
 	swap = radix_to_swp_entry(*pagep);
 	*pagep = NULL;
 
+	/* Prevent swapoff from happening to us. */
+	si = get_swap_device(swap);
+	if (!si) {
+		error = EINVAL;
+		goto failed;
+	}
 	/* Look it up and read it in.. */
 	page = lookup_swap_cache(swap, NULL, 0);
 	if (!page) {
@@ -1765,6 +1772,8 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
 	swap_free(swap);
 
 	*pagep = page;
+	if (si)
+		put_swap_device(si);
 	return 0;
 failed:
 	if (!shmem_confirm_swap(mapping, index, swap))
@@ -1775,6 +1784,9 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
 		put_page(page);
 	}
 
+	if (si)
+		put_swap_device(si);
+
 	return error;
 }
 
-- 
2.23.0

Re: [PATCH v5 4/4] mm/shmem: fix shmem_swapin() race with swapoff

[Huang, Ying]

Miaohe Lin <linmiaohe@huawei.com> writes:

> When I was investigating the swap code, I found the below possible race
> window:
>
> CPU 1                                         CPU 2
> -----                                         -----
> shmem_swapin
>   swap_cluster_readahead
>     if (likely(si->flags & (SWP_BLKDEV | SWP_FS_OPS))) {
>                                               swapoff
>                                                 ..
>                                                 si->swap_file = NULL;
>                                                 ..
>     struct inode *inode = si->swap_file->f_mapping->host;[oops!]
>
> Close this race window by using get/put_swap_device() to guard against
> concurrent swapoff.
>
> Fixes: 8fd2e0b505d1 ("mm: swap: check if swap backing device is congested or not")
> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>

Thanks!

Reviewed-by: "Huang, Ying" <ying.huang@intel.com>

> ---
>  mm/shmem.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/mm/shmem.c b/mm/shmem.c
> index 26c76b13ad23..2dafd65b0b42 100644
> --- a/mm/shmem.c
> +++ b/mm/shmem.c
> @@ -1696,6 +1696,7 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>  	struct address_space *mapping = inode->i_mapping;
>  	struct shmem_inode_info *info = SHMEM_I(inode);
>  	struct mm_struct *charge_mm = vma ? vma->vm_mm : current->mm;
> +	struct swap_info_struct *si;
>  	struct page *page;
>  	swp_entry_t swap;
>  	int error;
> @@ -1704,6 +1705,12 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>  	swap = radix_to_swp_entry(*pagep);
>  	*pagep = NULL;
>  
> +	/* Prevent swapoff from happening to us. */
> +	si = get_swap_device(swap);
> +	if (!si) {
> +		error = EINVAL;
> +		goto failed;
> +	}
>  	/* Look it up and read it in.. */
>  	page = lookup_swap_cache(swap, NULL, 0);
>  	if (!page) {
> @@ -1765,6 +1772,8 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>  	swap_free(swap);
>  
>  	*pagep = page;
> +	if (si)
> +		put_swap_device(si);
>  	return 0;
>  failed:
>  	if (!shmem_confirm_swap(mapping, index, swap))
> @@ -1775,6 +1784,9 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>  		put_page(page);
>  	}
>  
> +	if (si)
> +		put_swap_device(si);
> +
>  	return error;
>  }

Re: [PATCH v5 4/4] mm/shmem: fix shmem_swapin() race with swapoff

[Yu Zhao]

On Sun, Apr 25, 2021 at 3:54 AM Miaohe Lin <linmiaohe@huawei.com> wrote:
>
> When I was investigating the swap code, I found the below possible race
> window:
>
> CPU 1                                         CPU 2
> -----                                         -----
> shmem_swapin
>   swap_cluster_readahead
>     if (likely(si->flags & (SWP_BLKDEV | SWP_FS_OPS))) {
>                                               swapoff
>                                                 ..
>                                                 si->swap_file = NULL;
>                                                 ..
>     struct inode *inode = si->swap_file->f_mapping->host;[oops!]
>
> Close this race window by using get/put_swap_device() to guard against
> concurrent swapoff.
>
> Fixes: 8fd2e0b505d1 ("mm: swap: check if swap backing device is congested or not")
> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
> ---
>  mm/shmem.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/mm/shmem.c b/mm/shmem.c
> index 26c76b13ad23..2dafd65b0b42 100644
> --- a/mm/shmem.c
> +++ b/mm/shmem.c
> @@ -1696,6 +1696,7 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>         struct address_space *mapping = inode->i_mapping;
>         struct shmem_inode_info *info = SHMEM_I(inode);
>         struct mm_struct *charge_mm = vma ? vma->vm_mm : current->mm;
> +       struct swap_info_struct *si;
>         struct page *page;
>         swp_entry_t swap;
>         int error;
> @@ -1704,6 +1705,12 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>         swap = radix_to_swp_entry(*pagep);
>         *pagep = NULL;
>
> +       /* Prevent swapoff from happening to us. */
> +       si = get_swap_device(swap);
> +       if (!si) {
> +               error = EINVAL;
> +               goto failed;
> +       }

page is uninitialized?

>         /* Look it up and read it in.. */
>         page = lookup_swap_cache(swap, NULL, 0);
>         if (!page) {
> @@ -1765,6 +1772,8 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>         swap_free(swap);
>
>         *pagep = page;
> +       if (si)
> +               put_swap_device(si);
>         return 0;
>  failed:
>         if (!shmem_confirm_swap(mapping, index, swap))
> @@ -1775,6 +1784,9 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>                 put_page(page);
>         }
>
> +       if (si)
> +               put_swap_device(si);
> +
>         return error;
>  }
>
> --
> 2.23.0
>
>

Re: [PATCH v5 4/4] mm/shmem: fix shmem_swapin() race with swapoff

[Miaohe Lin]

On 2021/4/26 14:53, Yu Zhao wrote:
> On Sun, Apr 25, 2021 at 3:54 AM Miaohe Lin <linmiaohe@huawei.com> wrote:
>>
>> When I was investigating the swap code, I found the below possible race
>> window:
>>
>> CPU 1                                         CPU 2
>> -----                                         -----
>> shmem_swapin
>>   swap_cluster_readahead
>>     if (likely(si->flags & (SWP_BLKDEV | SWP_FS_OPS))) {
>>                                               swapoff
>>                                                 ..
>>                                                 si->swap_file = NULL;
>>                                                 ..
>>     struct inode *inode = si->swap_file->f_mapping->host;[oops!]
>>
>> Close this race window by using get/put_swap_device() to guard against
>> concurrent swapoff.
>>
>> Fixes: 8fd2e0b505d1 ("mm: swap: check if swap backing device is congested or not")
>> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
>> ---
>>  mm/shmem.c | 12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/mm/shmem.c b/mm/shmem.c
>> index 26c76b13ad23..2dafd65b0b42 100644
>> --- a/mm/shmem.c
>> +++ b/mm/shmem.c
>> @@ -1696,6 +1696,7 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>>         struct address_space *mapping = inode->i_mapping;
>>         struct shmem_inode_info *info = SHMEM_I(inode);
>>         struct mm_struct *charge_mm = vma ? vma->vm_mm : current->mm;
>> +       struct swap_info_struct *si;
>>         struct page *page;
>>         swp_entry_t swap;
>>         int error;
>> @@ -1704,6 +1705,12 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>>         swap = radix_to_swp_entry(*pagep);
>>         *pagep = NULL;
>>
>> +       /* Prevent swapoff from happening to us. */
>> +       si = get_swap_device(swap);
>> +       if (!si) {
>> +               error = EINVAL;
>> +               goto failed;
>> +       }
> 
> page is uninitialized?
> 

Sorry, my overlook! Compiler should have complained about it but there is none...
Many thanks for pointing this out! Will fix it in next version.

>>         /* Look it up and read it in.. */
>>         page = lookup_swap_cache(swap, NULL, 0);
>>         if (!page) {
>> @@ -1765,6 +1772,8 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>>         swap_free(swap);
>>
>>         *pagep = page;
>> +       if (si)
>> +               put_swap_device(si);
>>         return 0;
>>  failed:
>>         if (!shmem_confirm_swap(mapping, index, swap))
>> @@ -1775,6 +1784,9 @@ static int shmem_swapin_page(struct inode *inode, pgoff_t index,
>>                 put_page(page);
>>         }
>>
>> +       if (si)
>> +               put_swap_device(si);
>> +
>>         return error;
>>  }
>>
>> --
>> 2.23.0
>>
>>
> .
>