* [PATCH v2] ARC: Use max_high_pfn as a HIGHMEM zone border
@ 2021-04-27 12:13 Vladimir Isaev
2021-05-10 19:50 ` Vineet Gupta
0 siblings, 1 reply; 2+ messages in thread
From: Vladimir Isaev @ 2021-04-27 12:13 UTC (permalink / raw)
To: linux-snps-arc
Cc: linux-arch, linux-mm, linux-kernel, rppt, Vladimir Isaev, Vineet Gupta
Commit 4af22ded0ecf ("arc: fix memory initialization for systems
with two memory banks") fixed highmem, but for the PAE case it causes
bug messages:
BUG: Bad page state in process swapper pfn:80000
page:(ptrval) refcount:0 mapcount:1 mapping:00000000 index:0x0 pfn:0x80000
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
raw: 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.12.0-rc5-00003-g1e43c377a79f #1
Stack Trace:
arc_unwind_core+0xe8/0x118
Disabling lock debugging due to kernel taint
This is because the fix expects highmem to be always less than
lowmem and uses min_low_pfn as an upper zone border for highmem.
max_high_pfn should be ok for both highmem and highmem+PAE cases.
Signed-off-by: Vladimir Isaev <isaev@synopsys.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
---
Changes for v2:
- Revised commit message and added comment to code
---
arch/arc/mm/init.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index ce07e697916c..1bcc6985b9a0 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -157,7 +157,16 @@ void __init setup_arch_memory(void)
min_high_pfn = PFN_DOWN(high_mem_start);
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
- max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
+ /*
+ * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+ * For HIGHMEM without PAE max_high_pfn should be less than
+ * min_low_pfn to guarantee that these two regions don't overlap.
+ * For PAE case highmem is greater than lowmem, so it is natural
+ * to use max_high_pfn.
+ *
+ * In both cases, holes should be handled by pfn_valid().
+ */
+ max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
--
2.16.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARC: Use max_high_pfn as a HIGHMEM zone border
2021-04-27 12:13 [PATCH v2] ARC: Use max_high_pfn as a HIGHMEM zone border Vladimir Isaev
@ 2021-05-10 19:50 ` Vineet Gupta
0 siblings, 0 replies; 2+ messages in thread
From: Vineet Gupta @ 2021-05-10 19:50 UTC (permalink / raw)
To: Vladimir Isaev, linux-snps-arc; +Cc: linux-arch, linux-mm, linux-kernel, rppt
On 4/27/21 5:13 AM, Vladimir Isaev wrote:
> Commit 4af22ded0ecf ("arc: fix memory initialization for systems
> with two memory banks") fixed highmem, but for the PAE case it causes
> bug messages:
>
> BUG: Bad page state in process swapper pfn:80000
> page:(ptrval) refcount:0 mapcount:1 mapping:00000000 index:0x0 pfn:0x80000
> flags: 0x0()
> raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
> raw: 00000000
> page dumped because: nonzero mapcount
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper Not tainted 5.12.0-rc5-00003-g1e43c377a79f #1
>
> Stack Trace:
> arc_unwind_core+0xe8/0x118
> Disabling lock debugging due to kernel taint
>
> This is because the fix expects highmem to be always less than
> lowmem and uses min_low_pfn as an upper zone border for highmem.
>
> max_high_pfn should be ok for both highmem and highmem+PAE cases.
>
> Signed-off-by: Vladimir Isaev <isaev@synopsys.com>
> Cc: Mike Rapoport <rppt@linux.ibm.com>
> Cc: Vineet Gupta <vgupta@synopsys.com>
Applied to for-curr.
Thx,
-Vineet
> ---
> Changes for v2:
> - Revised commit message and added comment to code
> ---
> arch/arc/mm/init.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
> index ce07e697916c..1bcc6985b9a0 100644
> --- a/arch/arc/mm/init.c
> +++ b/arch/arc/mm/init.c
> @@ -157,7 +157,16 @@ void __init setup_arch_memory(void)
> min_high_pfn = PFN_DOWN(high_mem_start);
> max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
>
> - max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
> + /*
> + * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
> + * For HIGHMEM without PAE max_high_pfn should be less than
> + * min_low_pfn to guarantee that these two regions don't overlap.
> + * For PAE case highmem is greater than lowmem, so it is natural
> + * to use max_high_pfn.
> + *
> + * In both cases, holes should be handled by pfn_valid().
> + */
> + max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
>
> high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-05-10 19:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-27 12:13 [PATCH v2] ARC: Use max_high_pfn as a HIGHMEM zone border Vladimir Isaev
2021-05-10 19:50 ` Vineet Gupta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).