[PATCH AUTOSEL 4.9 01/12] staging: wimax/i2400m: fix byte-order issue

[PATCH AUTOSEL 4.9 01/12] staging: wimax/i2400m: fix byte-order issue

[Sasha Levin]

From: karthik alapati <mail@karthek.com>

[ Upstream commit 0c37baae130df39b19979bba88bde2ee70a33355 ]

fix sparse byte-order warnings by converting host byte-order
type to __le16 byte-order types before assigning to hdr.length

Signed-off-by: karthik alapati <mail@karthek.com>
Link: https://lore.kernel.org/r/0ae5c5c4c646506d8be871e7be5705542671a1d5.1613921277.git.mail@karthek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wimax/i2400m/op-rfkill.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wimax/i2400m/op-rfkill.c b/drivers/net/wimax/i2400m/op-rfkill.c
index dc6fe93ce71f..e8473047b2d1 100644
--- a/drivers/net/wimax/i2400m/op-rfkill.c
+++ b/drivers/net/wimax/i2400m/op-rfkill.c
@@ -101,7 +101,7 @@ int i2400m_op_rfkill_sw_toggle(struct wimax_dev *wimax_dev,
 	if (cmd == NULL)
 		goto error_alloc;
 	cmd->hdr.type = cpu_to_le16(I2400M_MT_CMD_RF_CONTROL);
-	cmd->hdr.length = sizeof(cmd->sw_rf);
+	cmd->hdr.length = cpu_to_le16(sizeof(cmd->sw_rf));
 	cmd->hdr.version = cpu_to_le16(I2400M_L3L4_VERSION);
 	cmd->sw_rf.hdr.type = cpu_to_le16(I2400M_TLV_RF_OPERATION);
 	cmd->sw_rf.hdr.length = cpu_to_le16(sizeof(cmd->sw_rf.status));
-- 
2.30.2

[PATCH AUTOSEL 4.9 02/12] usb: gadget: uvc: add bInterval checking for HS mode

[Sasha Levin]

From: Pawel Laszczak <pawell@cadence.com>

[ Upstream commit 26adde04acdff14a1f28d4a5dce46a8513a3038b ]

Patch adds extra checking for bInterval passed by configfs.
The 5.6.4 chapter of USB Specification (rev. 2.0) say:
"A high-bandwidth endpoint must specify a period of 1x125 µs
(i.e., a bInterval value of 1)."

The issue was observed during testing UVC class on CV.
I treat this change as improvement because we can control
bInterval by configfs.

Reviewed-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210308125338.4824-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_uvc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index f8a1881609a2..89da34ef7b3f 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -625,7 +625,12 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 
 	uvc_hs_streaming_ep.wMaxPacketSize =
 		cpu_to_le16(max_packet_size | ((max_packet_mult - 1) << 11));
-	uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
+
+	/* A high-bandwidth endpoint must specify a bInterval value of 1 */
+	if (max_packet_mult > 1)
+		uvc_hs_streaming_ep.bInterval = 1;
+	else
+		uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
 
 	uvc_ss_streaming_ep.wMaxPacketSize = cpu_to_le16(max_packet_size);
 	uvc_ss_streaming_ep.bInterval = opts->streaming_interval;
-- 
2.30.2

[PATCH AUTOSEL 4.9 03/12] usb: dwc3: gadget: Ignore EP queue requests during bus reset

[Sasha Levin]

From: Wesley Cheng <wcheng@codeaurora.org>

[ Upstream commit 71ca43f30df9c642970f9dc9b2d6f463f4967e7b ]

The current dwc3_gadget_reset_interrupt() will stop any active
transfers, but only addresses blocking of EP queuing for while we are
coming from a disconnected scenario, i.e. after receiving the disconnect
event.  If the host decides to issue a bus reset on the device, the
connected parameter will still be set to true, allowing for EP queuing
to continue while we are disabling the functions.  To avoid this, set the
connected flag to false until the stop active transfers is complete.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1616146285-19149-3-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index e0fb7b3723c5..cca51553e0fb 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2409,6 +2409,15 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 
 	dwc->connected = true;
 
+	/*
+	 * Ideally, dwc3_reset_gadget() would trigger the function
+	 * drivers to stop any active transfers through ep disable.
+	 * However, for functions which defer ep disable, such as mass
+	 * storage, we will need to rely on the call to stop active
+	 * transfers here, and avoid allowing of request queuing.
+	 */
+	dwc->connected = false;
+
 	/*
 	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
 	 * would cause a missing Disconnect Event if there's a
-- 
2.30.2

[PATCH AUTOSEL 4.9 04/12] usb: xhci: Fix port minor revision

[Sasha Levin]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit 64364bc912c01b33bba6c22e3ccb849bfca96398 ]

Some hosts incorrectly use sub-minor version for minor version (i.e.
0x02 instead of 0x20 for bcdUSB 0x320 and 0x01 for bcdUSB 0x310).
Currently the xHCI driver works around this by just checking for minor
revision > 0x01 for USB 3.1 everywhere. With the addition of USB 3.2,
checking this gets a bit cumbersome. Since there is no USB release with
bcdUSB 0x301 to 0x309, we can assume that sub-minor version 01 to 09 is
incorrect. Let's try to fix this and use the minor revision that matches
with the USB/xHCI spec to help with the version checking within the
driver.

Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ed330e95a19dc367819c5b4d78bf7a541c35aa0a.1615432770.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-mem.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 3cca60b845a8..9b30936904da 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2159,6 +2159,15 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 
 	if (major_revision == 0x03) {
 		rhub = &xhci->usb3_rhub;
+		/*
+		 * Some hosts incorrectly use sub-minor version for minor
+		 * version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01
+		 * for bcdUSB 0x310). Since there is no USB release with sub
+		 * minor version 0x301 to 0x309, we can assume that they are
+		 * incorrect and fix it here.
+		 */
+		if (minor_revision > 0x00 && minor_revision < 0x10)
+			minor_revision <<= 4;
 	} else if (major_revision <= 0x02) {
 		rhub = &xhci->usb2_rhub;
 	} else {
-- 
2.30.2

[PATCH AUTOSEL 4.9 05/12] PCI: PM: Do not read power state in pci_enable_device_flags()

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 4514d991d99211f225d83b7e640285f29f0755d0 ]

It should not be necessary to update the current_state field of
struct pci_dev in pci_enable_device_flags() before calling
do_pci_enable_device() for the device, because none of the
code between that point and the pci_set_power_state() call in
do_pci_enable_device() invoked later depends on it.

Moreover, doing that is actively harmful in some cases.  For example,
if the given PCI device depends on an ACPI power resource whose _STA
method initially returns 0 ("off"), but the config space of the PCI
device is accessible and the power state retrieved from the
PCI_PM_CTRL register is D0, the current_state field in the struct
pci_dev representing that device will get out of sync with the
power.state of its ACPI companion object and that will lead to
power management issues going forward.

To avoid such issues it is better to leave the current_state value
as is until it is changed to PCI_D0 by do_pci_enable_device() as
appropriate.  However, the power state of the device is not changed
to PCI_D0 if it is already enabled when pci_enable_device_flags()
gets called for it, so update its current_state in that case, but
use pci_update_current_state() covering platform PM too for that.

Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@gmail.com/
Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e09653c73ab4..acd89fa9820c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1378,20 +1378,10 @@ static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
 	int err;
 	int i, bars = 0;
 
-	/*
-	 * Power state could be unknown at this point, either due to a fresh
-	 * boot or a device removal call.  So get the current power state
-	 * so that things like MSI message writing will behave as expected
-	 * (e.g. if the device really is in D0 at enable time).
-	 */
-	if (dev->pm_cap) {
-		u16 pmcsr;
-		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
-		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
-	}
-
-	if (atomic_inc_return(&dev->enable_cnt) > 1)
+	if (atomic_inc_return(&dev->enable_cnt) > 1) {
+		pci_update_current_state(dev, dev->current_state);
 		return 0;		/* already enabled */
+	}
 
 	bridge = pci_upstream_bridge(dev);
 	if (bridge)
-- 
2.30.2

[PATCH AUTOSEL 4.9 06/12] x86/build: Propagate $(CLANG_FLAGS) to $(REALMODE_FLAGS)

[Sasha Levin]

From: John Millikin <john@john-millikin.com>

[ Upstream commit 8abe7fc26ad8f28bfdf78adbed56acd1fa93f82d ]

When cross-compiling with Clang, the `$(CLANG_FLAGS)' variable
contains additional flags needed to build C and assembly sources
for the target platform. Normally this variable is automatically
included in `$(KBUILD_CFLAGS)' via the top-level Makefile.

The x86 real-mode makefile builds `$(REALMODE_CFLAGS)' from a
plain assignment and therefore drops the Clang flags. This causes
Clang to not recognize x86-specific assembler directives:

  arch/x86/realmode/rm/header.S:36:1: error: unknown directive
  .type real_mode_header STT_OBJECT ; .size real_mode_header, .-real_mode_header
  ^

Explicit propagation of `$(CLANG_FLAGS)' to `$(REALMODE_CFLAGS)',
which is inherited by real-mode make rules, fixes cross-compilation
with Clang for x86 targets.

Relevant flags:

* `--target' sets the target architecture when cross-compiling. This
  flag must be set for both compilation and assembly (`KBUILD_AFLAGS')
  to support architecture-specific assembler directives.

* `-no-integrated-as' tells clang to assemble with GNU Assembler
  instead of its built-in LLVM assembler. This flag is set by default
  unless `LLVM_IAS=1' is set, because the LLVM assembler can't yet
  parse certain GNU extensions.

Signed-off-by: John Millikin <john@john-millikin.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://lkml.kernel.org/r/20210326000435.4785-2-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 9ebbd4892557..0bc35e3e6c5c 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -40,6 +40,7 @@ REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -Wno-address-of-packed-member)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), $(cc_stack_align4))
+REALMODE_CFLAGS += $(CLANG_FLAGS)
 export REALMODE_CFLAGS
 
 # BITS is used as extension for files which are available in a 32 bit
-- 
2.30.2

[PATCH AUTOSEL 4.9 07/12] spi: dln2: Fix reference leak to master

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 9b844b087124c1538d05f40fda8a4fec75af55be ]

Call spi_master_get() holds the reference count to master device, thus
we need an additional spi_master_put() call to reduce the reference
count, otherwise we will leak a reference to master.

This commit fix it by removing the unnecessary spi_master_get().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409082955.2907950-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dln2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dln2.c b/drivers/spi/spi-dln2.c
index b62a99caacc0..a41adea48618 100644
--- a/drivers/spi/spi-dln2.c
+++ b/drivers/spi/spi-dln2.c
@@ -783,7 +783,7 @@ static int dln2_spi_probe(struct platform_device *pdev)
 
 static int dln2_spi_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+	struct spi_master *master = platform_get_drvdata(pdev);
 	struct dln2_spi *dln2 = spi_master_get_devdata(master);
 
 	pm_runtime_disable(&pdev->dev);
-- 
2.30.2

[PATCH AUTOSEL 4.9 08/12] spi: omap-100k: Fix reference leak to master

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit a23faea76d4cf5f75decb574491e66f9ecd707e7 ]

Call spi_master_get() holds the reference count to master device, thus
we need an additional spi_master_put() call to reduce the reference
count, otherwise we will leak a reference to master.

This commit fix it by removing the unnecessary spi_master_get().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409082954.2906933-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap-100k.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c
index 76a8425be227..1eccdc4a4581 100644
--- a/drivers/spi/spi-omap-100k.c
+++ b/drivers/spi/spi-omap-100k.c
@@ -435,7 +435,7 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
 
 static int omap1_spi100k_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+	struct spi_master *master = platform_get_drvdata(pdev);
 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
 
 	pm_runtime_disable(&pdev->dev);
@@ -449,7 +449,7 @@ static int omap1_spi100k_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int omap1_spi100k_runtime_suspend(struct device *dev)
 {
-	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
 
 	clk_disable_unprepare(spi100k->ick);
@@ -460,7 +460,7 @@ static int omap1_spi100k_runtime_suspend(struct device *dev)
 
 static int omap1_spi100k_runtime_resume(struct device *dev)
 {
-	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
 	int ret;
 
-- 
2.30.2

[PATCH AUTOSEL 4.9 09/12] platform/x86: thinkpad_acpi: Correct thermal sensor allocation

[Sasha Levin]

From: Mark Pearson <markpearson@lenovo.com>

[ Upstream commit 6759e18e5cd8745a5dfc5726e4a3db5281ec1639 ]

On recent Thinkpad platforms it was reported that temp sensor 11 was
always incorrectly displaying 66C. It turns out the reason for this is
that this location in EC RAM is not a temperature sensor but is the
power supply ID (offset 0xC2).

Based on feedback from the Lenovo firmware team the EC RAM version can
be determined and for the current version (3) only the 0x78 to 0x7F
range is used for temp sensors. I don't have any details for earlier
versions so I have left the implementation unaltered there.

Note - in this block only 0x78 and 0x79 are officially designated (CPU &
GPU sensors). The use of the other locations in the block will vary from
platform to platform; but the existing logic to detect a sensor presence
holds.

Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 31 ++++++++++++++++++++--------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 379f9633f78e..84bfecded84d 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -6044,6 +6044,7 @@ enum thermal_access_mode {
 enum { /* TPACPI_THERMAL_TPEC_* */
 	TP_EC_THERMAL_TMP0 = 0x78,	/* ACPI EC regs TMP 0..7 */
 	TP_EC_THERMAL_TMP8 = 0xC0,	/* ACPI EC regs TMP 8..15 */
+	TP_EC_FUNCREV      = 0xEF,      /* ACPI EC Functional revision */
 	TP_EC_THERMAL_TMP_NA = -128,	/* ACPI EC sensor not available */
 
 	TPACPI_THERMAL_SENSOR_NA = -128000, /* Sensor not available */
@@ -6242,7 +6243,7 @@ static const struct attribute_group thermal_temp_input8_group = {
 
 static int __init thermal_init(struct ibm_init_struct *iibm)
 {
-	u8 t, ta1, ta2;
+	u8 t, ta1, ta2, ver = 0;
 	int i;
 	int acpi_tmp7;
 	int res;
@@ -6257,7 +6258,14 @@ static int __init thermal_init(struct ibm_init_struct *iibm)
 		 * 0x78-0x7F, 0xC0-0xC7.  Registers return 0x00 for
 		 * non-implemented, thermal sensors return 0x80 when
 		 * not available
+		 * The above rule is unfortunately flawed. This has been seen with
+		 * 0xC2 (power supply ID) causing thermal control problems.
+		 * The EC version can be determined by offset 0xEF and at least for
+		 * version 3 the Lenovo firmware team confirmed that registers 0xC0-0xC7
+		 * are not thermal registers.
 		 */
+		if (!acpi_ec_read(TP_EC_FUNCREV, &ver))
+			pr_warn("Thinkpad ACPI EC unable to access EC version\n");
 
 		ta1 = ta2 = 0;
 		for (i = 0; i < 8; i++) {
@@ -6267,11 +6275,13 @@ static int __init thermal_init(struct ibm_init_struct *iibm)
 				ta1 = 0;
 				break;
 			}
-			if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) {
-				ta2 |= t;
-			} else {
-				ta1 = 0;
-				break;
+			if (ver < 3) {
+				if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) {
+					ta2 |= t;
+				} else {
+					ta1 = 0;
+					break;
+				}
 			}
 		}
 		if (ta1 == 0) {
@@ -6287,9 +6297,12 @@ static int __init thermal_init(struct ibm_init_struct *iibm)
 				thermal_read_mode = TPACPI_THERMAL_NONE;
 			}
 		} else {
-			thermal_read_mode =
-			    (ta2 != 0) ?
-			    TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8;
+			if (ver >= 3)
+				thermal_read_mode = TPACPI_THERMAL_TPEC_8;
+			else
+				thermal_read_mode =
+					(ta2 != 0) ?
+					TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8;
 		}
 	} else if (acpi_tmp7) {
 		if (tpacpi_is_ibm() &&
-- 
2.30.2

[PATCH AUTOSEL 4.9 10/12] intel_th: Consistency and off-by-one fix

[Sasha Levin]

From: Pavel Machek <pavel@ucw.cz>

[ Upstream commit 18ffbc47d45a1489b664dd68fb3a7610a6e1dea3 ]

Consistently use "< ... +1" in for loops.

Fix of-by-one in for_each_set_bit().

Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/lkml/20190724095841.GA6952@amd/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210414171251.14672-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/intel_th/gth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwtracing/intel_th/gth.c b/drivers/hwtracing/intel_th/gth.c
index 98a4cb5d4993..9c236c88bc7b 100644
--- a/drivers/hwtracing/intel_th/gth.c
+++ b/drivers/hwtracing/intel_th/gth.c
@@ -485,7 +485,7 @@ static void intel_th_gth_disable(struct intel_th_device *thdev,
 	output->active = false;
 
 	for_each_set_bit(master, gth->output[output->port].master,
-			 TH_CONFIGURABLE_MASTERS) {
+			 TH_CONFIGURABLE_MASTERS + 1) {
 		gth_master_set(gth, master, -1);
 	}
 	spin_unlock(&gth->gth_lock);
@@ -605,7 +605,7 @@ static void intel_th_gth_unassign(struct intel_th_device *thdev,
 	othdev->output.port = -1;
 	othdev->output.active = false;
 	gth->output[port].output = NULL;
-	for (master = 0; master <= TH_CONFIGURABLE_MASTERS; master++)
+	for (master = 0; master < TH_CONFIGURABLE_MASTERS + 1; master++)
 		if (gth->master[master] == port)
 			gth->master[master] = -1;
 	spin_unlock(&gth->gth_lock);
-- 
2.30.2

[PATCH AUTOSEL 4.9 11/12] phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit e1723d8b87b73ab363256e7ca3af3ddb75855680 ]

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210407092716.3270248-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/phy-twl4030-usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index ddb530ee2255..9d57695e1f21 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -798,7 +798,7 @@ static int twl4030_usb_remove(struct platform_device *pdev)
 
 	usb_remove_phy(&twl->phy);
 	pm_runtime_get_sync(twl->dev);
-	cancel_delayed_work(&twl->id_workaround_work);
+	cancel_delayed_work_sync(&twl->id_workaround_work);
 	device_remove_file(twl->dev, &dev_attr_vbus);
 
 	/* set transceiver mode to power on defaults */
-- 
2.30.2

[PATCH AUTOSEL 4.9 12/12] btrfs: convert logic BUG_ON()'s in replace_path to ASSERT()'s

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 7a9213a93546e7eaef90e6e153af6b8fc7553f10 ]

A few BUG_ON()'s in replace_path are purely to keep us from making
logical mistakes, so replace them with ASSERT()'s.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/relocation.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index cd5b86d80e7a..5caf4dbdd801 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1801,8 +1801,8 @@ int replace_path(struct btrfs_trans_handle *trans,
 	int ret;
 	int slot;
 
-	BUG_ON(src->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
-	BUG_ON(dest->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID);
+	ASSERT(src->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID);
+	ASSERT(dest->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
 
 	last_snapshot = btrfs_root_last_snapshot(&src->root_item);
 again:
@@ -1834,7 +1834,7 @@ int replace_path(struct btrfs_trans_handle *trans,
 	parent = eb;
 	while (1) {
 		level = btrfs_header_level(parent);
-		BUG_ON(level < lowest_level);
+		ASSERT(level >= lowest_level);
 
 		ret = btrfs_bin_search(parent, &key, level, &slot);
 		if (ret && slot > 0)
-- 
2.30.2