[PATCH v3 0/2] staging: iio: cdc: ad7746: add dt properties for capacitive channel setup

[PATCH v3 0/2] staging: iio: cdc: ad7746: add dt properties for capacitive channel setup

[Lucas Stankus]

This patch series aims to replace the platform_struct for the ad7746 driver
in favor of device tree bindings, creating the dt-binding documentation in
the process.

Since the header file was only used to define the struct and the excitation
level values, it was possible to remove the file entirely.

Changelog v2 -> v3:
- Add application reference note for the inverted EXCX dt bindings
- Replace macro with lookup table for setting the capacitive channel
  excitation voltage

Lucas Stankus (2):
  dt-bindings: staging: iio: cdc: ad7746: add binding documentation for
    AD7746
  staging: iio: cdc: ad7746: use dt for capacitive channel setup.

 .../bindings/iio/cdc/adi,ad7746.yaml          | 77 +++++++++++++++++++
 drivers/staging/iio/cdc/ad7746.c              | 54 ++++++++-----
 drivers/staging/iio/cdc/ad7746.h              | 28 -------
 3 files changed, 110 insertions(+), 49 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
 delete mode 100644 drivers/staging/iio/cdc/ad7746.h

-- 
2.31.1

[PATCH v3 1/2] dt-bindings: staging: iio: cdc: ad7746: add binding documentation for AD7746

[Lucas Stankus]

Add device tree binding documentation for AD7746 cdc in YAML format.

Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
---
 .../bindings/iio/cdc/adi,ad7746.yaml          | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml

diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
new file mode 100644
index 000000000000..a02036ef9e8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/cdc/adi,ad7746.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+  Specifications about the part can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7745
+      - adi,ad7746
+      - adi,ad7747
+
+  reg:
+    maxItems: 1
+
+  adi,excitation-vdd-permille:
+    description: |
+      Set VDD per mille to be used as the excitation voltage.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [125, 250, 375, 500]
+
+  adi,exca-output-en:
+    description: Enables the EXCA pin as the excitation output.
+    type: boolean
+
+  adi,exca-output-invert:
+    description: |
+      Inverts the excitation output in the EXCA pin.
+      Normally only one of the EXCX pins would be inverted, check the following
+      application notes for more details
+      https://www.analog.com/media/en/technical-documentation/application-notes/AN-1585.pdf
+    type: boolean
+
+  adi,excb-output-en:
+    description: Enables the EXCB pin as the excitation output.
+    type: boolean
+
+  adi,excb-output-invert:
+    description: Inverts the excitation output in the EXCB pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7746: cdc@48 {
+        compatible = "adi,ad7746";
+        reg = <0x48>;
+        adi,excitation-vdd-permille = <125>;
+
+        adi,exca-output-en;
+        adi,exca-output-invert;
+        adi,excb-output-en;
+        adi,excb-output-invert;
+      };
+    };
+...
-- 
2.31.1

[PATCH v3 2/2] staging: iio: cdc: ad7746: use dt for capacitive channel setup.

[Lucas Stankus]

Ditch platform_data fields in favor of device tree properties for
configuring EXCA and EXCB output pins and setting the capacitive channel
excitation level.

As this covers all current use cases for the platform_data struct, remove
ad7746.h header file since it's no longer needed.

Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
---
 drivers/staging/iio/cdc/ad7746.c | 54 +++++++++++++++++++-------------
 drivers/staging/iio/cdc/ad7746.h | 28 -----------------
 2 files changed, 33 insertions(+), 49 deletions(-)
 delete mode 100644 drivers/staging/iio/cdc/ad7746.h

diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index dfd71e99e872..531f1b96dea2 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -18,8 +18,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
-#include "ad7746.h"
-
 /*
  * AD7746 Register Definition
  */
@@ -676,10 +674,11 @@ static const struct iio_info ad7746_info = {
 static int ad7746_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
-	struct ad7746_platform_data *pdata = client->dev.platform_data;
+	struct device *dev = &client->dev;
 	struct ad7746_chip_info *chip;
 	struct iio_dev *indio_dev;
 	unsigned char regval = 0;
+	unsigned int vdd_permille;
 	int ret = 0;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
@@ -703,26 +702,39 @@ static int ad7746_probe(struct i2c_client *client,
 	indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	if (pdata) {
-		if (pdata->exca_en) {
-			if (pdata->exca_inv_en)
-				regval |= AD7746_EXCSETUP_NEXCA;
-			else
-				regval |= AD7746_EXCSETUP_EXCA;
-		}
+	if (device_property_read_bool(dev, "adi,exca-output-en")) {
+		if (device_property_read_bool(dev, "adi,exca-output-invert"))
+			regval |= AD7746_EXCSETUP_NEXCA;
+		else
+			regval |= AD7746_EXCSETUP_EXCA;
+	}
 
-		if (pdata->excb_en) {
-			if (pdata->excb_inv_en)
-				regval |= AD7746_EXCSETUP_NEXCB;
-			else
-				regval |= AD7746_EXCSETUP_EXCB;
-		}
+	if (device_property_read_bool(dev, "adi,excb-output-en")) {
+		if (device_property_read_bool(dev, "adi,excb-output-invert"))
+			regval |= AD7746_EXCSETUP_NEXCB;
+		else
+			regval |= AD7746_EXCSETUP_EXCB;
+	}
 
-		regval |= AD7746_EXCSETUP_EXCLVL(pdata->exclvl);
-	} else {
-		dev_warn(&client->dev, "No platform data? using default\n");
-		regval = AD7746_EXCSETUP_EXCA | AD7746_EXCSETUP_EXCB |
-			AD7746_EXCSETUP_EXCLVL(3);
+	ret = device_property_read_u32(dev, "adi,excitation-vdd-permille",
+				       &vdd_permille);
+	if (!ret) {
+		switch (vdd_permille) {
+		case 125:
+			regval |= AD7746_EXCSETUP_EXCLVL(0);
+			break;
+		case 250:
+			regval |= AD7746_EXCSETUP_EXCLVL(1);
+			break;
+		case 375:
+			regval |= AD7746_EXCSETUP_EXCLVL(2);
+			break;
+		case 500:
+			regval |= AD7746_EXCSETUP_EXCLVL(3);
+			break;
+		default:
+			break;
+		}
 	}
 
 	ret = i2c_smbus_write_byte_data(chip->client,
diff --git a/drivers/staging/iio/cdc/ad7746.h b/drivers/staging/iio/cdc/ad7746.h
deleted file mode 100644
index 8bdbd732dbbd..000000000000
--- a/drivers/staging/iio/cdc/ad7746.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * AD7746 capacitive sensor driver supporting AD7745, AD7746 and AD7747
- *
- * Copyright 2011 Analog Devices Inc.
- */
-
-#ifndef IIO_CDC_AD7746_H_
-#define IIO_CDC_AD7746_H_
-
-/*
- * TODO: struct ad7746_platform_data needs to go into include/linux/iio
- */
-
-#define AD7466_EXCLVL_0		0 /* +-VDD/8 */
-#define AD7466_EXCLVL_1		1 /* +-VDD/4 */
-#define AD7466_EXCLVL_2		2 /* +-VDD * 3/8 */
-#define AD7466_EXCLVL_3		3 /* +-VDD/2 */
-
-struct ad7746_platform_data {
-	unsigned char exclvl;	/*Excitation Voltage Level */
-	bool exca_en;		/* enables EXCA pin as the excitation output */
-	bool exca_inv_en;	/* enables /EXCA pin as the excitation output */
-	bool excb_en;		/* enables EXCB pin as the excitation output */
-	bool excb_inv_en;	/* enables /EXCB pin as the excitation output */
-};
-
-#endif /* IIO_CDC_AD7746_H_ */
-- 
2.31.1

Re: [PATCH v3 0/2] staging: iio: cdc: ad7746: add dt properties for capacitive channel setup

[Jonathan Cameron]

On Sat, 1 May 2021 09:32:03 -0300
Lucas Stankus <lucas.p.stankus@gmail.com> wrote:

> This patch series aims to replace the platform_struct for the ad7746 driver
> in favor of device tree bindings, creating the dt-binding documentation in
> the process.
> 
> Since the header file was only used to define the struct and the excitation
> level values, it was possible to remove the file entirely.
> 
> Changelog v2 -> v3:
> - Add application reference note for the inverted EXCX dt bindings
> - Replace macro with lookup table for setting the capacitive channel
>   excitation voltage
> 
> Lucas Stankus (2):
>   dt-bindings: staging: iio: cdc: ad7746: add binding documentation for
>     AD7746
>   staging: iio: cdc: ad7746: use dt for capacitive channel setup.

Looks good to me.  Thanks!

Will leave time for Rob or anyone else to take a look etc before applying.

If I seem to have lost it then feel free to give me a poke in a few weeks
(it's happened a few times in the past :( 

Thanks,

Jonathan
> 
>  .../bindings/iio/cdc/adi,ad7746.yaml          | 77 +++++++++++++++++++
>  drivers/staging/iio/cdc/ad7746.c              | 54 ++++++++-----
>  drivers/staging/iio/cdc/ad7746.h              | 28 -------
>  3 files changed, 110 insertions(+), 49 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
>  delete mode 100644 drivers/staging/iio/cdc/ad7746.h
> 

Re: [PATCH v3 2/2] staging: iio: cdc: ad7746: use dt for capacitive channel setup.

[Dan Carpenter]

On Sat, May 01, 2021 at 09:32:53AM -0300, Lucas Stankus wrote:
> diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
> index dfd71e99e872..531f1b96dea2 100644
> --- a/drivers/staging/iio/cdc/ad7746.c
> +++ b/drivers/staging/iio/cdc/ad7746.c
> @@ -18,8 +18,6 @@
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
>  
> -#include "ad7746.h"
> -
>  /*
>   * AD7746 Register Definition
>   */
> @@ -676,10 +674,11 @@ static const struct iio_info ad7746_info = {
>  static int ad7746_probe(struct i2c_client *client,
>  			const struct i2c_device_id *id)
>  {
> -	struct ad7746_platform_data *pdata = client->dev.platform_data;
> +	struct device *dev = &client->dev;
>  	struct ad7746_chip_info *chip;
>  	struct iio_dev *indio_dev;
>  	unsigned char regval = 0;
> +	unsigned int vdd_permille;
>  	int ret = 0;
>  
>  	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
> @@ -703,26 +702,39 @@ static int ad7746_probe(struct i2c_client *client,
>  	indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  
> -	if (pdata) {
> -		if (pdata->exca_en) {
> -			if (pdata->exca_inv_en)
> -				regval |= AD7746_EXCSETUP_NEXCA;
> -			else
> -				regval |= AD7746_EXCSETUP_EXCA;
> -		}
> +	if (device_property_read_bool(dev, "adi,exca-output-en")) {
> +		if (device_property_read_bool(dev, "adi,exca-output-invert"))
> +			regval |= AD7746_EXCSETUP_NEXCA;
> +		else
> +			regval |= AD7746_EXCSETUP_EXCA;
> +	}
>  
> -		if (pdata->excb_en) {
> -			if (pdata->excb_inv_en)
> -				regval |= AD7746_EXCSETUP_NEXCB;
> -			else
> -				regval |= AD7746_EXCSETUP_EXCB;
> -		}
> +	if (device_property_read_bool(dev, "adi,excb-output-en")) {
> +		if (device_property_read_bool(dev, "adi,excb-output-invert"))
> +			regval |= AD7746_EXCSETUP_NEXCB;
> +		else
> +			regval |= AD7746_EXCSETUP_EXCB;
> +	}
>  
> -		regval |= AD7746_EXCSETUP_EXCLVL(pdata->exclvl);
> -	} else {
> -		dev_warn(&client->dev, "No platform data? using default\n");
> -		regval = AD7746_EXCSETUP_EXCA | AD7746_EXCSETUP_EXCB |
> -			AD7746_EXCSETUP_EXCLVL(3);
> +	ret = device_property_read_u32(dev, "adi,excitation-vdd-permille",
> +				       &vdd_permille);
> +	if (!ret) {

This test is reversed.  I wonder if the static checkers can catch the
uninitialized variable bug...  It's probably better to write it as:

	if (device_property_read_u32(dev, "adi,excitation-vdd-permille",
				     &vdd_permille) {

So it matches the others.

regards,
dan carpenter;

> +		switch (vdd_permille) {
> +		case 125:
> +			regval |= AD7746_EXCSETUP_EXCLVL(0);
> +			break;
> +		case 250:
> +			regval |= AD7746_EXCSETUP_EXCLVL(1);
> +			break;
> +		case 375:
> +			regval |= AD7746_EXCSETUP_EXCLVL(2);
> +			break;
> +		case 500:
> +			regval |= AD7746_EXCSETUP_EXCLVL(3);
> +			break;
> +		default:
> +			break;
> +		}
>  	}
>  
>  	ret = i2c_smbus_write_byte_data(chip->client,

Re: [PATCH v3 2/2] staging: iio: cdc: ad7746: use dt for capacitive channel setup.

[Dan Carpenter]

On Mon, May 03, 2021 at 01:07:20PM +0300, Dan Carpenter wrote:
> On Sat, May 01, 2021 at 09:32:53AM -0300, Lucas Stankus wrote:
> > diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
> > index dfd71e99e872..531f1b96dea2 100644
> > --- a/drivers/staging/iio/cdc/ad7746.c
> > +++ b/drivers/staging/iio/cdc/ad7746.c
> > @@ -18,8 +18,6 @@
> >  #include <linux/iio/iio.h>
> >  #include <linux/iio/sysfs.h>
> >  
> > -#include "ad7746.h"
> > -
> >  /*
> >   * AD7746 Register Definition
> >   */
> > @@ -676,10 +674,11 @@ static const struct iio_info ad7746_info = {
> >  static int ad7746_probe(struct i2c_client *client,
> >  			const struct i2c_device_id *id)
> >  {
> > -	struct ad7746_platform_data *pdata = client->dev.platform_data;
> > +	struct device *dev = &client->dev;
> >  	struct ad7746_chip_info *chip;
> >  	struct iio_dev *indio_dev;
> >  	unsigned char regval = 0;
> > +	unsigned int vdd_permille;
> >  	int ret = 0;
> >  
> >  	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
> > @@ -703,26 +702,39 @@ static int ad7746_probe(struct i2c_client *client,
> >  	indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
> >  	indio_dev->modes = INDIO_DIRECT_MODE;
> >  
> > -	if (pdata) {
> > -		if (pdata->exca_en) {
> > -			if (pdata->exca_inv_en)
> > -				regval |= AD7746_EXCSETUP_NEXCA;
> > -			else
> > -				regval |= AD7746_EXCSETUP_EXCA;
> > -		}
> > +	if (device_property_read_bool(dev, "adi,exca-output-en")) {
> > +		if (device_property_read_bool(dev, "adi,exca-output-invert"))
> > +			regval |= AD7746_EXCSETUP_NEXCA;
> > +		else
> > +			regval |= AD7746_EXCSETUP_EXCA;
> > +	}
> >  
> > -		if (pdata->excb_en) {
> > -			if (pdata->excb_inv_en)
> > -				regval |= AD7746_EXCSETUP_NEXCB;
> > -			else
> > -				regval |= AD7746_EXCSETUP_EXCB;
> > -		}
> > +	if (device_property_read_bool(dev, "adi,excb-output-en")) {
> > +		if (device_property_read_bool(dev, "adi,excb-output-invert"))
> > +			regval |= AD7746_EXCSETUP_NEXCB;
> > +		else
> > +			regval |= AD7746_EXCSETUP_EXCB;
> > +	}
> >  
> > -		regval |= AD7746_EXCSETUP_EXCLVL(pdata->exclvl);
> > -	} else {
> > -		dev_warn(&client->dev, "No platform data? using default\n");
> > -		regval = AD7746_EXCSETUP_EXCA | AD7746_EXCSETUP_EXCB |
> > -			AD7746_EXCSETUP_EXCLVL(3);
> > +	ret = device_property_read_u32(dev, "adi,excitation-vdd-permille",
> > +				       &vdd_permille);
> > +	if (!ret) {
> 
> This test is reversed.  I wonder if the static checkers can catch the
> uninitialized variable bug...  It's probably better to write it as:
> 
> 	if (device_property_read_u32(dev, "adi,excitation-vdd-permille",
> 				     &vdd_permille) {
> 
> So it matches the others.

Oops.  Sorry for the noise.  I was wrong on this.  I looked at the
device_property_read_bool() code instead of the device_property_read_u32().

It's disappointing that the returns are reversed.

regards,
dan carpenter

Re: [PATCH v3 1/2] dt-bindings: staging: iio: cdc: ad7746: add binding documentation for AD7746

[Rob Herring]

On Sat, 01 May 2021 09:32:31 -0300, Lucas Stankus wrote:
> Add device tree binding documentation for AD7746 cdc in YAML format.
> 
> Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
> ---
>  .../bindings/iio/cdc/adi,ad7746.yaml          | 77 +++++++++++++++++++
>  1 file changed, 77 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 0/2] staging: iio: cdc: ad7746: add dt properties for capacitive channel setup

[Lucas Stankus]

On Sun, May 2, 2021 at 2:49 PM Jonathan Cameron <jic23@kernel.org> wrote:
>
> On Sat, 1 May 2021 09:32:03 -0300
> Lucas Stankus <lucas.p.stankus@gmail.com> wrote:
>
> > This patch series aims to replace the platform_struct for the ad7746 driver
> > in favor of device tree bindings, creating the dt-binding documentation in
> > the process.
> >
> > Since the header file was only used to define the struct and the excitation
> > level values, it was possible to remove the file entirely.
> >
> > Changelog v2 -> v3:
> > - Add application reference note for the inverted EXCX dt bindings
> > - Replace macro with lookup table for setting the capacitive channel
> >   excitation voltage
> >
> > Lucas Stankus (2):
> >   dt-bindings: staging: iio: cdc: ad7746: add binding documentation for
> >     AD7746
> >   staging: iio: cdc: ad7746: use dt for capacitive channel setup.
>
> Looks good to me.  Thanks!
>
> Will leave time for Rob or anyone else to take a look etc before applying.
>
> If I seem to have lost it then feel free to give me a poke in a few weeks
> (it's happened a few times in the past :(
>
> Thanks,
>
> Jonathan
> >
> >  .../bindings/iio/cdc/adi,ad7746.yaml          | 77 +++++++++++++++++++
> >  drivers/staging/iio/cdc/ad7746.c              | 54 ++++++++-----
> >  drivers/staging/iio/cdc/ad7746.h              | 28 -------
> >  3 files changed, 110 insertions(+), 49 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
> >  delete mode 100644 drivers/staging/iio/cdc/ad7746.h
> >
>

Hey Jonathan,

It has been a week or so without any more feedback, so I'm just a pinging here
to know if this can be applied.

Thanks,
Lucas

Re: [PATCH v3 0/2] staging: iio: cdc: ad7746: add dt properties for capacitive channel setup

[Jonathan Cameron]

On Wed, 19 May 2021 17:59:31 -0300
Lucas Stankus <lucas.p.stankus@gmail.com> wrote:

> On Sun, May 2, 2021 at 2:49 PM Jonathan Cameron <jic23@kernel.org> wrote:
> >
> > On Sat, 1 May 2021 09:32:03 -0300
> > Lucas Stankus <lucas.p.stankus@gmail.com> wrote:
> >  
> > > This patch series aims to replace the platform_struct for the ad7746 driver
> > > in favor of device tree bindings, creating the dt-binding documentation in
> > > the process.
> > >
> > > Since the header file was only used to define the struct and the excitation
> > > level values, it was possible to remove the file entirely.
> > >
> > > Changelog v2 -> v3:
> > > - Add application reference note for the inverted EXCX dt bindings
> > > - Replace macro with lookup table for setting the capacitive channel
> > >   excitation voltage
> > >
> > > Lucas Stankus (2):
> > >   dt-bindings: staging: iio: cdc: ad7746: add binding documentation for
> > >     AD7746
> > >   staging: iio: cdc: ad7746: use dt for capacitive channel setup.  
> >
> > Looks good to me.  Thanks!
> >
> > Will leave time for Rob or anyone else to take a look etc before applying.
> >
> > If I seem to have lost it then feel free to give me a poke in a few weeks
> > (it's happened a few times in the past :(
> >
> > Thanks,
> >
> > Jonathan  
> > >
> > >  .../bindings/iio/cdc/adi,ad7746.yaml          | 77 +++++++++++++++++++
> > >  drivers/staging/iio/cdc/ad7746.c              | 54 ++++++++-----
> > >  drivers/staging/iio/cdc/ad7746.h              | 28 -------
> > >  3 files changed, 110 insertions(+), 49 deletions(-)
> > >  create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
> > >  delete mode 100644 drivers/staging/iio/cdc/ad7746.h
> > >  
> >  
> 
> Hey Jonathan,
> 
> It has been a week or so without any more feedback, so I'm just a pinging here
> to know if this can be applied.

oops. Indeed time I picked these up.  Somehow I had them in the wrong colour
in my horrendous colour based tracking system :(

Now applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to do their worst.

Thanks,

Jonathan

> 
> Thanks,
> Lucas