* [PATCH v7 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device
@ 2021-05-14 12:05 Ikjoon Jang
2021-05-14 12:05 ` [PATCH v7 2/2] arm64: dts: mt8183: add cbas node under cros_ec Ikjoon Jang
0 siblings, 1 reply; 2+ messages in thread
From: Ikjoon Jang @ 2021-05-14 12:05 UTC (permalink / raw)
To: devicetree, Lee Jones
Cc: Stephen Boyd, linux-kernel, linux-input, Benson Leung,
Guenter Roeck, Jiri Kosina, Enric Balletbo i Serra, Hsin-Yi Wang,
Ikjoon Jang, Rob Herring, Rob Herring
This is for ChromeOS tablets which have a 'cros_cbas' switch device
in the "Whiskers" base board. This device can be instantiated only by
device tree on ARM platforms. ChromeOS EC doesn't provide a way to
probe the device.
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v7:
- no changes from v6
Changes in v6:
- Remove a label for cbas node in a example
Changes in v5:
- Add missing blank lines and change the description property's position.
- Add a note to description: "this device cannot be detected at runtime."
Changes in v4:
- Define cros-cbase bindings inside google,cros-ec.yaml instead of
a separated binding document.
.../bindings/mfd/google,cros-ec.yaml | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 76bf16ee27ec..929c17552d8b 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -114,6 +114,22 @@ properties:
- "#address-cells"
- "#size-cells"
+ cbas:
+ type: object
+
+ description:
+ This device is used to signal when a detachable base is attached
+ to a Chrome OS tablet. This device cannot be detected at runtime.
+
+ properties:
+ compatible:
+ const: google,cros-cbas
+
+ required:
+ - compatible
+
+ additionalProperties: false
+
patternProperties:
"^i2c-tunnel[0-9]*$":
type: object
@@ -180,6 +196,10 @@ examples:
interrupts = <99 0>;
interrupt-parent = <&gpio7>;
spi-max-frequency = <5000000>;
+
+ cbas {
+ compatible = "google,cros-cbas";
+ };
};
};
--
2.31.1.751.gd2f1c929bd-goog
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH v7 2/2] arm64: dts: mt8183: add cbas node under cros_ec
2021-05-14 12:05 [PATCH v7 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device Ikjoon Jang
@ 2021-05-14 12:05 ` Ikjoon Jang
0 siblings, 0 replies; 2+ messages in thread
From: Ikjoon Jang @ 2021-05-14 12:05 UTC (permalink / raw)
To: devicetree, Lee Jones
Cc: Stephen Boyd, linux-kernel, linux-input, Benson Leung,
Guenter Roeck, Jiri Kosina, Enric Balletbo i Serra, Hsin-Yi Wang,
Ikjoon Jang, Matthias Brugger, Rob Herring, linux-arm-kernel,
linux-mediatek
Add a 'cbas' device node for supporting tablet mode switch in
kukui devices.
Kukui platforms with detacheable base have an additional input
device under cros-ec, which reports SW_TABLET_MODE regarding
its base state (e.g. base flipped or detached).
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
---
Changes in v7:
- remove a label from cbas node
- fix an erratum in commit message (table --> tablet)
- dt-binding patchess merged altogether with mt8183 dts
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ff56bcfa3370..1512605a438e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -816,6 +816,10 @@ usbc_extcon: extcon0 {
compatible = "google,extcon-usbc-cros-ec";
google,usb-port-id = <0>;
};
+
+ cbas {
+ compatible = "google,cros-cbas";
+ };
};
};
--
2.31.1.751.gd2f1c929bd-goog
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-05-14 12:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-14 12:05 [PATCH v7 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device Ikjoon Jang
2021-05-14 12:05 ` [PATCH v7 2/2] arm64: dts: mt8183: add cbas node under cros_ec Ikjoon Jang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).