From: Robert Marko <robert.marko@sartura.hr>
To: lee.jones@linaro.org, linux-kernel@vger.kernel.org,
linus.walleij@linaro.org, bgolaszewski@baylibre.com,
linux-gpio@vger.kernel.org, p.zabel@pengutronix.de,
robh+dt@kernel.org, devicetree@vger.kernel.org
Cc: luka.perkov@sartura.hr, jmp@epiphyte.org, pmenzel@molgen.mpg.de,
buczek@molgen.mpg.de, Robert Marko <robert.marko@sartura.hr>,
Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: [PATCH v3 2/6] gpio: Add Delta TN48M CPLD GPIO driver
Date: Mon, 31 May 2021 14:51:39 +0200 [thread overview]
Message-ID: <20210531125143.257622-2-robert.marko@sartura.hr> (raw)
In-Reply-To: <20210531125143.257622-1-robert.marko@sartura.hr>
Delta TN48M CPLD is used as a GPIO expander for the SFP GPIOs.
It is a mix of input only and output only pins.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
Changes in v2:
* Rewrite to use simple I2C MFD and GPIO regmap
* Drop DT bindings for pin numbering
drivers/gpio/Kconfig | 12 ++++++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-tn48m.c | 89 +++++++++++++++++++++++++++++++++++++++
3 files changed, 102 insertions(+)
create mode 100644 drivers/gpio/gpio-tn48m.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e3607ec4c2e8..472f7764508e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1310,6 +1310,18 @@ config GPIO_TIMBERDALE
help
Add support for the GPIO IP in the timberdale FPGA.
+config GPIO_TN48M_CPLD
+ tristate "Delta Networks TN48M switch CPLD GPIO driver"
+ depends on MFD_TN48M_CPLD
+ select GPIO_REGMAP
+ help
+ This enables support for the GPIOs found on the Delta
+ Networks TN48M switch CPLD.
+ They are used for inputs and outputs on the SFP slots.
+
+ This driver can also be built as a module. If so, the
+ module will be called gpio-tn48m.
+
config GPIO_TPS65086
tristate "TI TPS65086 GPO"
depends on MFD_TPS65086
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c58a90a3c3b1..271fb806475e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -145,6 +145,7 @@ obj-$(CONFIG_GPIO_TEGRA186) += gpio-tegra186.o
obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o
obj-$(CONFIG_GPIO_THUNDERX) += gpio-thunderx.o
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
+obj-$(CONFIG_GPIO_TN48M_CPLD) += gpio-tn48m.o
obj-$(CONFIG_GPIO_TPIC2810) += gpio-tpic2810.o
obj-$(CONFIG_GPIO_TPS65086) += gpio-tps65086.o
obj-$(CONFIG_GPIO_TPS65218) += gpio-tps65218.o
diff --git a/drivers/gpio/gpio-tn48m.c b/drivers/gpio/gpio-tn48m.c
new file mode 100644
index 000000000000..41484c002826
--- /dev/null
+++ b/drivers/gpio/gpio-tn48m.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Delta TN48M CPLD GPIO driver
+ *
+ * Copyright 2021 Sartura Ltd
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/regmap.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+enum tn48m_gpio_type {
+ TN48M_SFP_TX_DISABLE = 1,
+ TN48M_SFP_PRESENT,
+ TN48M_SFP_LOS,
+};
+
+static int tn48m_gpio_probe(struct platform_device *pdev)
+{
+ struct gpio_regmap_config config = {0};
+ enum tn48m_gpio_type type;
+ struct regmap *regmap;
+ u32 base;
+ int ret;
+
+ if (!pdev->dev.parent)
+ return -ENODEV;
+
+ type = (uintptr_t)device_get_match_data(&pdev->dev);
+ if (!type)
+ return -ENODEV;
+
+ ret = device_property_read_u32(&pdev->dev, "reg", &base);
+ if (ret)
+ return -EINVAL;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ config.regmap = regmap;
+ config.parent = &pdev->dev;
+ config.ngpio = 4;
+
+ switch (type) {
+ case TN48M_SFP_TX_DISABLE:
+ config.reg_set_base = base;
+ break;
+ case TN48M_SFP_PRESENT:
+ config.reg_dat_base = base;
+ break;
+ case TN48M_SFP_LOS:
+ config.reg_dat_base = base;
+ break;
+ default:
+ dev_err(&pdev->dev, "unknown type %d\n", type);
+ return -ENODEV;
+ }
+
+ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&pdev->dev, &config));
+}
+
+static const struct of_device_id tn48m_gpio_of_match[] = {
+ { .compatible = "delta,tn48m-gpio-sfp-tx-disable", .data = (void *)TN48M_SFP_TX_DISABLE },
+ { .compatible = "delta,tn48m-gpio-sfp-present", .data = (void *)TN48M_SFP_PRESENT },
+ { .compatible = "delta,tn48m-gpio-sfp-los", .data = (void *)TN48M_SFP_LOS },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tn48m_gpio_of_match);
+
+static struct platform_driver tn48m_gpio_driver = {
+ .driver = {
+ .name = "delta-tn48m-gpio",
+ .of_match_table = tn48m_gpio_of_match,
+ },
+ .probe = tn48m_gpio_probe,
+};
+module_platform_driver(tn48m_gpio_driver);
+
+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
+MODULE_DESCRIPTION("Delta TN48M CPLD GPIO driver");
+MODULE_LICENSE("GPL");
--
2.31.1
next prev parent reply other threads:[~2021-05-31 12:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-31 12:51 [PATCH v3 1/6] mfd: simple-mfd-i2c: Add Delta TN48M CPLD support Robert Marko
2021-05-31 12:51 ` Robert Marko [this message]
2021-05-31 12:51 ` [PATCH v3 3/6] dt-bindings: reset: Add Delta TN48M Robert Marko
2021-05-31 12:51 ` [PATCH v3 4/6] reset: Add Delta TN48M CPLD reset controller Robert Marko
2021-06-01 15:38 ` Philipp Zabel
2021-06-01 17:09 ` Robert Marko
2021-06-02 8:47 ` Philipp Zabel
2021-06-02 11:48 ` Robert Marko
2021-05-31 12:51 ` [PATCH v3 5/6] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings Robert Marko
2021-06-02 10:47 ` Lee Jones
2021-06-02 10:54 ` Robert Marko
2021-05-31 12:51 ` [PATCH v3 6/6] MAINTAINERS: Add Delta Networks TN48M CPLD drivers Robert Marko
2021-06-01 8:39 ` [PATCH v3 1/6] mfd: simple-mfd-i2c: Add Delta TN48M CPLD support Lee Jones
2021-06-01 9:12 ` Robert Marko
2021-06-02 10:49 ` Lee Jones
2021-06-02 11:53 ` Robert Marko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210531125143.257622-2-robert.marko@sartura.hr \
--to=robert.marko@sartura.hr \
--cc=andy.shevchenko@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=buczek@molgen.mpg.de \
--cc=devicetree@vger.kernel.org \
--cc=jmp@epiphyte.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luka.perkov@sartura.hr \
--cc=p.zabel@pengutronix.de \
--cc=pmenzel@molgen.mpg.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).