linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: George McCollister <george.mccollister@gmail.com>
To: netdev@vger.kernel.org
Cc: George McCollister <george.mccollister@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next] net: dsa: xrs700x: allow HSR/PRP supervision dupes for node_table
Date: Fri,  4 Jun 2021 11:29:22 -0500	[thread overview]
Message-ID: <20210604162922.76954-1-george.mccollister@gmail.com> (raw)

Add an inbound policy filter which matches the HSR/PRP supervision
MAC range and forwards to the CPU port without discarding duplicates.
This is required to correctly populate time_in[A] and time_in[B] in the
HSR/PRP node_table. Leave the policy disabled by default and
enable/disable it when joining/leaving hsr.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
---
 drivers/net/dsa/xrs700x/xrs700x.c | 67 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c
index fde6e99274b6..a79066174a77 100644
--- a/drivers/net/dsa/xrs700x/xrs700x.c
+++ b/drivers/net/dsa/xrs700x/xrs700x.c
@@ -79,6 +79,9 @@ static const struct xrs700x_mib xrs700x_mibs[] = {
 	XRS700X_MIB(XRS_EARLY_DROP_L, "early_drop", tx_dropped),
 };
 
+static const u8 eth_hsrsup_addr[ETH_ALEN] = {
+	0x01, 0x15, 0x4e, 0x00, 0x01, 0x00};
+
 static void xrs700x_get_strings(struct dsa_switch *ds, int port,
 				u32 stringset, u8 *data)
 {
@@ -329,6 +332,50 @@ static int xrs700x_port_add_bpdu_ipf(struct dsa_switch *ds, int port)
 	return 0;
 }
 
+/* Add an inbound policy filter which matches the HSR/PRP supervision MAC
+ * range and forwards to the CPU port without discarding duplicates.
+ * This is required to correctly populate the HSR/PRP node_table.
+ * Leave the policy disabled, it will be enabled as needed.
+ */
+static int xrs700x_port_add_hsrsup_ipf(struct dsa_switch *ds, int port)
+{
+	struct xrs700x *priv = ds->priv;
+	unsigned int val = 0;
+	int i = 0;
+	int ret;
+
+	/* Compare 40 bits of the destination MAC address. */
+	ret = regmap_write(priv->regmap, XRS_ETH_ADDR_CFG(port, 1), 40 << 2);
+	if (ret)
+		return ret;
+
+	/* match HSR/PRP supervision destination 01:15:4e:00:01:XX */
+	for (i = 0; i < sizeof(eth_hsrsup_addr); i += 2) {
+		ret = regmap_write(priv->regmap, XRS_ETH_ADDR_0(port, 1) + i,
+				   eth_hsrsup_addr[i] |
+				   (eth_hsrsup_addr[i + 1] << 8));
+		if (ret)
+			return ret;
+	}
+
+	/* Mirror HSR/PRP supervision to CPU port */
+	for (i = 0; i < ds->num_ports; i++) {
+		if (dsa_is_cpu_port(ds, i))
+			val |= BIT(i);
+	}
+
+	ret = regmap_write(priv->regmap, XRS_ETH_ADDR_FWD_MIRROR(port, 1), val);
+	if (ret)
+		return ret;
+
+	/* Allow must be set prevent duplicate discard */
+	ret = regmap_write(priv->regmap, XRS_ETH_ADDR_FWD_ALLOW(port, 1), val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static int xrs700x_port_setup(struct dsa_switch *ds, int port)
 {
 	bool cpu_port = dsa_is_cpu_port(ds, port);
@@ -358,6 +405,10 @@ static int xrs700x_port_setup(struct dsa_switch *ds, int port)
 		ret = xrs700x_port_add_bpdu_ipf(ds, port);
 		if (ret)
 			return ret;
+
+		ret = xrs700x_port_add_hsrsup_ipf(ds, port);
+		if (ret)
+			return ret;
 	}
 
 	return 0;
@@ -565,6 +616,14 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port,
 			    XRS_PORT_FORWARDING);
 	regmap_fields_write(priv->ps_forward, port, XRS_PORT_FORWARDING);
 
+	/* Enable inbound policy added by xrs700x_port_add_hsrsup_ipf()
+	 * which allows HSR/PRP supervision forwarding to the CPU port without
+	 * discarding duplicates.
+	 */
+	regmap_update_bits(priv->regmap,
+			   XRS_ETH_ADDR_CFG(partner->index, 1), 1, 1);
+	regmap_update_bits(priv->regmap, XRS_ETH_ADDR_CFG(port, 1), 1, 1);
+
 	hsr_pair[0] = port;
 	hsr_pair[1] = partner->index;
 	for (i = 0; i < ARRAY_SIZE(hsr_pair); i++) {
@@ -611,6 +670,14 @@ static int xrs700x_hsr_leave(struct dsa_switch *ds, int port,
 			    XRS_PORT_FORWARDING);
 	regmap_fields_write(priv->ps_forward, port, XRS_PORT_FORWARDING);
 
+	/* Disable inbound policy added by xrs700x_port_add_hsrsup_ipf()
+	 * which allows HSR/PRP supervision forwarding to the CPU port without
+	 * discarding duplicates.
+	 */
+	regmap_update_bits(priv->regmap,
+			   XRS_ETH_ADDR_CFG(partner->index, 1), 1, 0);
+	regmap_update_bits(priv->regmap, XRS_ETH_ADDR_CFG(port, 1), 1, 0);
+
 	hsr_pair[0] = port;
 	hsr_pair[1] = partner->index;
 	for (i = 0; i < ARRAY_SIZE(hsr_pair); i++) {
-- 
2.11.0


             reply	other threads:[~2021-06-04 16:30 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-04 16:29 George McCollister [this message]
2021-06-04 18:55 ` [PATCH net-next] net: dsa: xrs700x: allow HSR/PRP supervision dupes for node_table Vladimir Oltean
2021-06-04 19:50   ` George McCollister
2021-06-04 20:39     ` Vladimir Oltean
2021-06-04 20:50 ` Vladimir Oltean
2021-06-04 22:00 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210604162922.76954-1-george.mccollister@gmail.com \
    --to=george.mccollister@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).