linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: George McCollister <george.mccollister@gmail.com>
Cc: netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next] net: dsa: xrs700x: allow HSR/PRP supervision dupes for node_table
Date: Fri, 4 Jun 2021 21:55:11 +0300	[thread overview]
Message-ID: <20210604185511.yi5zejpz37rklzfw@skbuf> (raw)
In-Reply-To: <20210604162922.76954-1-george.mccollister@gmail.com>

On Fri, Jun 04, 2021 at 11:29:22AM -0500, George McCollister wrote:
> Add an inbound policy filter which matches the HSR/PRP supervision
> MAC range and forwards to the CPU port without discarding duplicates.
> This is required to correctly populate time_in[A] and time_in[B] in the
> HSR/PRP node_table. Leave the policy disabled by default and
> enable/disable it when joining/leaving hsr.
> 
> Signed-off-by: George McCollister <george.mccollister@gmail.com>
> ---

What happens if duplicates are discarded for supervision frames and
time_in[A] or time_in[B] is not updated in the node table?

>  drivers/net/dsa/xrs700x/xrs700x.c | 67 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c
> index fde6e99274b6..a79066174a77 100644
> --- a/drivers/net/dsa/xrs700x/xrs700x.c
> +++ b/drivers/net/dsa/xrs700x/xrs700x.c
> @@ -79,6 +79,9 @@ static const struct xrs700x_mib xrs700x_mibs[] = {
>  	XRS700X_MIB(XRS_EARLY_DROP_L, "early_drop", tx_dropped),
>  };
>  
> +static const u8 eth_hsrsup_addr[ETH_ALEN] = {
> +	0x01, 0x15, 0x4e, 0x00, 0x01, 0x00};
> +

What if the user sets a different last address byte for supervision frames?

>  static void xrs700x_get_strings(struct dsa_switch *ds, int port,
>  				u32 stringset, u8 *data)
>  {
> @@ -329,6 +332,50 @@ static int xrs700x_port_add_bpdu_ipf(struct dsa_switch *ds, int port)
>  	return 0;
>  }
>  
> +/* Add an inbound policy filter which matches the HSR/PRP supervision MAC
> + * range and forwards to the CPU port without discarding duplicates.
> + * This is required to correctly populate the HSR/PRP node_table.
> + * Leave the policy disabled, it will be enabled as needed.
> + */
> +static int xrs700x_port_add_hsrsup_ipf(struct dsa_switch *ds, int port)
> +{
> +	struct xrs700x *priv = ds->priv;
> +	unsigned int val = 0;
> +	int i = 0;
> +	int ret;
> +
> +	/* Compare 40 bits of the destination MAC address. */
> +	ret = regmap_write(priv->regmap, XRS_ETH_ADDR_CFG(port, 1), 40 << 2);
> +	if (ret)
> +		return ret;
> +
> +	/* match HSR/PRP supervision destination 01:15:4e:00:01:XX */
> +	for (i = 0; i < sizeof(eth_hsrsup_addr); i += 2) {
> +		ret = regmap_write(priv->regmap, XRS_ETH_ADDR_0(port, 1) + i,
> +				   eth_hsrsup_addr[i] |
> +				   (eth_hsrsup_addr[i + 1] << 8));
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* Mirror HSR/PRP supervision to CPU port */
> +	for (i = 0; i < ds->num_ports; i++) {
> +		if (dsa_is_cpu_port(ds, i))
> +			val |= BIT(i);
> +	}
> +
> +	ret = regmap_write(priv->regmap, XRS_ETH_ADDR_FWD_MIRROR(port, 1), val);
> +	if (ret)
> +		return ret;
> +
> +	/* Allow must be set prevent duplicate discard */
> +	ret = regmap_write(priv->regmap, XRS_ETH_ADDR_FWD_ALLOW(port, 1), val);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
>  static int xrs700x_port_setup(struct dsa_switch *ds, int port)
>  {
>  	bool cpu_port = dsa_is_cpu_port(ds, port);
> @@ -358,6 +405,10 @@ static int xrs700x_port_setup(struct dsa_switch *ds, int port)
>  		ret = xrs700x_port_add_bpdu_ipf(ds, port);
>  		if (ret)
>  			return ret;
> +
> +		ret = xrs700x_port_add_hsrsup_ipf(ds, port);
> +		if (ret)
> +			return ret;
>  	}
>  
>  	return 0;
> @@ -565,6 +616,14 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port,
>  			    XRS_PORT_FORWARDING);
>  	regmap_fields_write(priv->ps_forward, port, XRS_PORT_FORWARDING);
>  
> +	/* Enable inbound policy added by xrs700x_port_add_hsrsup_ipf()
> +	 * which allows HSR/PRP supervision forwarding to the CPU port without
> +	 * discarding duplicates.
> +	 */
> +	regmap_update_bits(priv->regmap,
> +			   XRS_ETH_ADDR_CFG(partner->index, 1), 1, 1);
> +	regmap_update_bits(priv->regmap, XRS_ETH_ADDR_CFG(port, 1), 1, 1);
> +
>  	hsr_pair[0] = port;
>  	hsr_pair[1] = partner->index;
>  	for (i = 0; i < ARRAY_SIZE(hsr_pair); i++) {
> @@ -611,6 +670,14 @@ static int xrs700x_hsr_leave(struct dsa_switch *ds, int port,
>  			    XRS_PORT_FORWARDING);
>  	regmap_fields_write(priv->ps_forward, port, XRS_PORT_FORWARDING);
>  
> +	/* Disable inbound policy added by xrs700x_port_add_hsrsup_ipf()
> +	 * which allows HSR/PRP supervision forwarding to the CPU port without
> +	 * discarding duplicates.
> +	 */
> +	regmap_update_bits(priv->regmap,
> +			   XRS_ETH_ADDR_CFG(partner->index, 1), 1, 0);
> +	regmap_update_bits(priv->regmap, XRS_ETH_ADDR_CFG(port, 1), 1, 0);
> +
>  	hsr_pair[0] = port;
>  	hsr_pair[1] = partner->index;
>  	for (i = 0; i < ARRAY_SIZE(hsr_pair); i++) {
> -- 
> 2.11.0
> 

  reply	other threads:[~2021-06-04 18:56 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-04 16:29 [PATCH net-next] net: dsa: xrs700x: allow HSR/PRP supervision dupes for node_table George McCollister
2021-06-04 18:55 ` Vladimir Oltean [this message]
2021-06-04 19:50   ` George McCollister
2021-06-04 20:39     ` Vladimir Oltean
2021-06-04 20:50 ` Vladimir Oltean
2021-06-04 22:00 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210604185511.yi5zejpz37rklzfw@skbuf \
    --to=olteanv@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=george.mccollister@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).