linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/3] net: marvell: prestera: add LAG support
@ 2021-06-10 15:43 Vadym Kochan
  2021-06-10 15:43 ` [PATCH v2 1/3] net: marvell: prestera: move netdev topology validation to prestera_main Vadym Kochan
                   ` (4 more replies)
  0 siblings, 5 replies; 8+ messages in thread
From: Vadym Kochan @ 2021-06-10 15:43 UTC (permalink / raw)
  To: David S. Miller, Jakub Kicinski, netdev, Andrew Lunn, Vladimir Oltean
  Cc: Vadym Kochan, Taras Chornyi, linux-kernel, Mickey Rachamim, Vadym Kochan

From: Vadym Kochan <vkochan@marvell.com>

The following features are supported:

    - LAG basic operations
        - create/delete LAG
        - add/remove a member to LAG
        - enable/disable member in LAG
    - LAG Bridge support
    - LAG VLAN support
    - LAG FDB support

Limitations:

    - Only HASH lag tx type is supported
    - The Hash parameters are not configurable. They are applied
      during the LAG creation stage.
    - Enslaving a port to the LAG device that already has an
      upper device is not supported.

Changes extracted from:

    https://lkml.org/lkml/2021/2/3/877

and marked with "v2".

v2:

    There are 2 additional preparation patches which simplifies the
    netdev topology handling.

    1) Initialize 'lag' with NULL in prestera_lag_create()             [suggested by Vladimir Oltean]

    2) Use -ENOSPC in prestera_lag_port_add() if max lag               [suggested by Vladimir Oltean]
       numbers were reached.

    3) Do not propagate netdev events to prestera_switchdev            [suggested by Vladimir Oltean]
       but call bridge specific funcs. It simplifies the code.

    4) Check on info->link_up in prestera_netdev_port_lower_event()    [suggested by Vladimir Oltean]

    5) Return -EOPNOTSUPP in prestera_netdev_port_event() in case      [suggested by Vladimir Oltean]
       LAG hashing mode is not supported.

    6) Do not pass "lower" netdev to bridge join/leave functions.      [suggested by Vladimir Oltean]
       It is not need as offloading settings applied on particular
       physical port. It requires to do extra upper dev lookup
       in case port is in the LAG which is in the bridge on vlans add/del.

Serhiy Boiko (1):
  net: marvell: prestera: add LAG support

Vadym Kochan (2):
  net: marvell: prestera: move netdev topology validation to
    prestera_main
  net: marvell: prestera: do not propagate netdev events to
    prestera_switchdev.c

 .../net/ethernet/marvell/prestera/prestera.h  |  30 +-
 .../ethernet/marvell/prestera/prestera_hw.c   | 180 +++++++++++-
 .../ethernet/marvell/prestera/prestera_hw.h   |  14 +
 .../ethernet/marvell/prestera/prestera_main.c | 267 +++++++++++++++++-
 .../marvell/prestera/prestera_switchdev.c     | 163 ++++++-----
 .../marvell/prestera/prestera_switchdev.h     |   7 +-
 6 files changed, 573 insertions(+), 88 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2021-06-10 22:58 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-10 15:43 [PATCH v2 0/3] net: marvell: prestera: add LAG support Vadym Kochan
2021-06-10 15:43 ` [PATCH v2 1/3] net: marvell: prestera: move netdev topology validation to prestera_main Vadym Kochan
2021-06-10 15:43 ` [PATCH v2 2/3] net: marvell: prestera: do not propagate netdev events to prestera_switchdev.c Vadym Kochan
2021-06-10 15:43 ` [PATCH v2 3/3] net: marvell: prestera: add LAG support Vadym Kochan
2021-06-10 22:58   ` Vladimir Oltean
2021-06-10 16:08 ` [PATCH v2 0/3] " Vadym Kochan
2021-06-10 17:38   ` Vladimir Oltean
2021-06-10 21:40 ` patchwork-bot+netdevbpf

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).