linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org
Cc: bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, lgirdwood@gmail.com,
	Mark Brown <broonie@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: [PATCH v3 5/5] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board
Date: Thu, 17 Jun 2021 10:47:12 +0530	[thread overview]
Message-ID: <20210617051712.345372-6-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20210617051712.345372-1-bhupesh.sharma@linaro.org>

SA8155p-adp board supports a new regulator - pmm8155au.

The output power management circuits in this regulator include:
- FTS510 smps,
- HFS510 smps, and
- LDO510 linear regulators

Add support for the same.

Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 36 +++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index af41a517da99..6cca910a76de 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -883,6 +883,38 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
 	{}
 };
 
+static const struct rpmh_vreg_init_data pmm8155au_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_hfsmps510, "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_hfsmps510, "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_ftsmps510, "vdd-s8"),
+	RPMH_VREG("smps9",  "smp%s9",  &pmic5_ftsmps510, "vdd-s9"),
+	RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	{}
+};
+
 static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
 	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
 	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
@@ -1177,6 +1209,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pmc8180c-rpmh-regulators",
 		.data = pm8150l_vreg_data,
 	},
+	{
+		.compatible = "qcom,pmm8155au-rpmh-regulators",
+		.data = pmm8155au_vreg_data,
+	},
 	{
 		.compatible = "qcom,pmx55-rpmh-regulators",
 		.data = pmx55_vreg_data,
-- 
2.31.1


  parent reply	other threads:[~2021-06-17  5:18 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-17  5:17 [PATCH v3 0/5] regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board Bhupesh Sharma
2021-06-17  5:17 ` [PATCH v3 1/5] dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically Bhupesh Sharma
2021-06-18 18:04   ` Bjorn Andersson
2021-06-24 21:23   ` Rob Herring
2021-06-17  5:17 ` [PATCH v3 2/5] dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic Bhupesh Sharma
2021-06-18 18:05   ` Bjorn Andersson
2021-06-24 21:23   ` Rob Herring
2021-06-17  5:17 ` [PATCH v3 3/5] regulator: qcom-rpmh: Cleanup terminator line commas Bhupesh Sharma
2021-06-17  5:17 ` [PATCH v3 4/5] regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[] array Bhupesh Sharma
2021-06-17  5:17 ` Bhupesh Sharma [this message]
2021-06-18 18:06   ` [PATCH v3 5/5] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board Bjorn Andersson
2021-06-21 18:45 ` [PATCH v3 0/5] regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210617051712.345372-6-bhupesh.sharma@linaro.org \
    --to=bhupesh.sharma@linaro.org \
    --cc=bhupesh.linux@gmail.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [PATCH v3 5/5] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).