From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, bhupesh.linux@gmail.com,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, lgirdwood@gmail.com,
Mark Brown <broonie@kernel.org>
Subject: Re: [PATCH v3 1/5] dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically
Date: Fri, 18 Jun 2021 13:04:43 -0500 [thread overview]
Message-ID: <YMzgOxoBexqKSZxl@builder.lan> (raw)
In-Reply-To: <20210617051712.345372-2-bhupesh.sharma@linaro.org>
On Thu 17 Jun 00:17 CDT 2021, Bhupesh Sharma wrote:
> Arrange the compatibles inside qcom-rpmh regulator device tree
> bindings alphabetically.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> .../bindings/regulator/qcom,rpmh-regulator.yaml | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> index e561a5b941e4..3546c6a966a3 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> @@ -33,6 +33,9 @@ description: |
>
> The names used for regulator nodes must match those supported by a given
> PMIC. Supported regulator node names are
> + For PM6150, smps1 - smps5, ldo1 - ldo19
> + For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
> + For PM7325, smps1 - smps8, ldo1 - ldo19
> For PM8005, smps1 - smps4
> For PM8009, smps1 - smps2, ldo1 - ldo7
> For PM8150, smps1 - smps10, ldo1 - ldo18
> @@ -41,15 +44,15 @@ description: |
> For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
> For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
> For PMI8998, bob
> - For PM6150, smps1 - smps5, ldo1 - ldo19
> - For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
> - For PMX55, smps1 - smps7, ldo1 - ldo16
> - For PM7325, smps1 - smps8, ldo1 - ldo19
> For PMR735A, smps1 - smps3, ldo1 - ldo7
> + For PMX55, smps1 - smps7, ldo1 - ldo16
>
> properties:
> compatible:
> enum:
> + - qcom,pm6150-rpmh-regulators
> + - qcom,pm6150l-rpmh-regulators
> + - qcom,pm7325-rpmh-regulators
> - qcom,pm8005-rpmh-regulators
> - qcom,pm8009-rpmh-regulators
> - qcom,pm8009-1-rpmh-regulators
> @@ -59,11 +62,8 @@ properties:
> - qcom,pm8350c-rpmh-regulators
> - qcom,pm8998-rpmh-regulators
> - qcom,pmi8998-rpmh-regulators
> - - qcom,pm6150-rpmh-regulators
> - - qcom,pm6150l-rpmh-regulators
> - - qcom,pmx55-rpmh-regulators
> - - qcom,pm7325-rpmh-regulators
> - qcom,pmr735a-rpmh-regulators
> + - qcom,pmx55-rpmh-regulators
>
> qcom,pmic-id:
> description: |
> --
> 2.31.1
>
next prev parent reply other threads:[~2021-06-18 18:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-17 5:17 [PATCH v3 0/5] regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board Bhupesh Sharma
2021-06-17 5:17 ` [PATCH v3 1/5] dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically Bhupesh Sharma
2021-06-18 18:04 ` Bjorn Andersson [this message]
2021-06-24 21:23 ` Rob Herring
2021-06-17 5:17 ` [PATCH v3 2/5] dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic Bhupesh Sharma
2021-06-18 18:05 ` Bjorn Andersson
2021-06-24 21:23 ` Rob Herring
2021-06-17 5:17 ` [PATCH v3 3/5] regulator: qcom-rpmh: Cleanup terminator line commas Bhupesh Sharma
2021-06-17 5:17 ` [PATCH v3 4/5] regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[] array Bhupesh Sharma
2021-06-17 5:17 ` [PATCH v3 5/5] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board Bhupesh Sharma
2021-06-18 18:06 ` Bjorn Andersson
2021-06-21 18:45 ` [PATCH v3 0/5] regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YMzgOxoBexqKSZxl@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=bhupesh.linux@gmail.com \
--cc=bhupesh.sharma@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).