* [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init
@ 2021-06-21 5:07 Dongliang Mu
2021-06-21 5:07 ` [PATCH 2/3] media: dvb-usb: move kfree(d) to dvb_usb_device_exit Dongliang Mu
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Dongliang Mu @ 2021-06-21 5:07 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Dongliang Mu, linux-media, linux-kernel
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
---
drivers/media/usb/dvb-usb/dvb-usb-init.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 28e1fd64dd3c..edc477cedaa9 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -286,13 +286,15 @@ int dvb_usb_device_init(struct usb_interface *intf,
desc = dvb_usb_find_device(udev, &d->props, &cold);
if (!desc) {
- deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n");
+ deb_err("something went very wrong,
+ device was not found in current device list.\n");
ret = -ENODEV;
goto error;
}
if (cold) {
- info("found a '%s' in cold state, will try to load a firmware", desc->name);
+ info("found a %s in cold state, will try to load a firmware",
+ desc->name);
ret = dvb_usb_download_firmware(udev, props);
if (!props->no_reconnect || ret != 0)
goto error;
@@ -314,7 +316,7 @@ int dvb_usb_device_init(struct usb_interface *intf,
if (du)
*du = d;
- info("%s successfully initialized and connected.", desc->name);
+ info("%s is successfully initialized and connected.", desc->name);
return 0;
error:
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/3] media: dvb-usb: move kfree(d) to dvb_usb_device_exit
2021-06-21 5:07 [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init Dongliang Mu
@ 2021-06-21 5:07 ` Dongliang Mu
2021-07-25 13:47 ` Sean Young
2021-06-21 5:07 ` [PATCH 3/3] media: dvb-usb: Fix error handling in dvb_usb_i2c_init Dongliang Mu
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Dongliang Mu @ 2021-06-21 5:07 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Dongliang Mu, linux-media, linux-kernel
As d is allocated in dvb_usb_device_init, so move to the deallocation of
d from dvb_usb_exit to dvb_usb_device_exit
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
---
drivers/media/usb/dvb-usb/dvb-usb-init.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index edc477cedaa9..21ad51be4820 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -147,7 +147,6 @@ static int dvb_usb_exit(struct dvb_usb_device *d)
d->props.priv_destroy(d);
kfree(d->priv);
- kfree(d);
return 0;
}
@@ -333,9 +332,10 @@ void dvb_usb_device_exit(struct usb_interface *intf)
char name[40];
usb_set_intfdata(intf, NULL);
- if (d != NULL && d->desc != NULL) {
+ if (d && d->desc) {
strscpy(name, d->desc->name, sizeof(name));
dvb_usb_exit(d);
+ kfree(d);
} else {
strscpy(name, default_name, sizeof(name));
}
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/3] media: dvb-usb: Fix error handling in dvb_usb_i2c_init
2021-06-21 5:07 [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init Dongliang Mu
2021-06-21 5:07 ` [PATCH 2/3] media: dvb-usb: move kfree(d) to dvb_usb_device_exit Dongliang Mu
@ 2021-06-21 5:07 ` Dongliang Mu
2021-06-21 7:05 ` [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init kernel test robot
2021-06-21 11:38 ` kernel test robot
3 siblings, 0 replies; 6+ messages in thread
From: Dongliang Mu @ 2021-06-21 5:07 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Takashi Iwai, Sean Young
Cc: Dongliang Mu, Mauro Carvalho Chehab, linux-media, linux-kernel
In dvb_usb_i2c_init, if i2c_add_adapter fails, it only prints an error
message, and then continues to set DVB_USB_STATE_I2C. This affects the
logic of dvb_usb_i2c_exit, which leads to that, the deletion of i2c_adap
even if the i2c_add_adapter fails.
Fix this by returning at the failure of i2c_add_adapter and then move
dvb_usb_i2c_exit out of the error handling code of dvb_usb_i2c_init.
Fixes: 13a79f14ab28 ("media: dvb-usb: Fix memory leak at error in dvb_usb_device_init()")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
---
drivers/media/usb/dvb-usb/dvb-usb-i2c.c | 9 +++++++--
drivers/media/usb/dvb-usb/dvb-usb-init.c | 3 ++-
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-i2c.c b/drivers/media/usb/dvb-usb/dvb-usb-i2c.c
index 2e07106f4680..bc4b2abdde1a 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-i2c.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-i2c.c
@@ -17,7 +17,8 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d)
if (d->props.i2c_algo == NULL) {
err("no i2c algorithm specified");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err;
}
strscpy(d->i2c_adap.name, d->desc->name, sizeof(d->i2c_adap.name));
@@ -27,11 +28,15 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d)
i2c_set_adapdata(&d->i2c_adap, d);
- if ((ret = i2c_add_adapter(&d->i2c_adap)) < 0)
+ ret = i2c_add_adapter(&d->i2c_adap);
+ if (ret < 0) {
err("could not add i2c adapter");
+ goto err;
+ }
d->state |= DVB_USB_STATE_I2C;
+err:
return ret;
}
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 21ad51be4820..ae3f76787279 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -147,6 +147,7 @@ static int dvb_usb_exit(struct dvb_usb_device *d)
d->props.priv_destroy(d);
kfree(d->priv);
+ d->priv = NULL;
return 0;
}
@@ -193,8 +194,8 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
err_adapter_init:
dvb_usb_adapter_exit(d);
-err_i2c_init:
dvb_usb_i2c_exit(d);
+err_i2c_init:
if (d->priv && d->props.priv_destroy)
d->props.priv_destroy(d);
err_priv_init:
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init
2021-06-21 5:07 [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init Dongliang Mu
2021-06-21 5:07 ` [PATCH 2/3] media: dvb-usb: move kfree(d) to dvb_usb_device_exit Dongliang Mu
2021-06-21 5:07 ` [PATCH 3/3] media: dvb-usb: Fix error handling in dvb_usb_i2c_init Dongliang Mu
@ 2021-06-21 7:05 ` kernel test robot
2021-06-21 11:38 ` kernel test robot
3 siblings, 0 replies; 6+ messages in thread
From: kernel test robot @ 2021-06-21 7:05 UTC (permalink / raw)
To: Dongliang Mu, Mauro Carvalho Chehab
Cc: kbuild-all, clang-built-linux, linux-media, Dongliang Mu, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 5048 bytes --]
Hi Dongliang,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on linuxtv-media/master]
[also build test WARNING on v5.13-rc7 next-20210618]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Dongliang-Mu/media-dvb-usb-break-long-strings-in-dvb_usb_device_init/20210621-130906
base: git://linuxtv.org/media_tree.git master
config: x86_64-randconfig-a012-20210621 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project e1adf90826a57b674eee79b071fb46c1f5683cd0)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/2cb920d86e9a83188dc0c72083640ca03e580a33
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Dongliang-Mu/media-dvb-usb-break-long-strings-in-dvb_usb_device_init/20210621-130906
git checkout 2cb920d86e9a83188dc0c72083640ca03e580a33
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/media/usb/dvb-usb/dvb-usb-init.c:289:11: warning: missing terminating '"' character [-Winvalid-pp-token]
deb_err("something went very wrong,
^
drivers/media/usb/dvb-usb/dvb-usb-init.c:290:51: warning: missing terminating '"' character [-Winvalid-pp-token]
device was not found in current device list.\n");
^
drivers/media/usb/dvb-usb/dvb-usb-init.c:289:3: error: unterminated function-like macro invocation
deb_err("something went very wrong,
^
drivers/media/usb/dvb-usb/dvb-usb-common.h:22:9: note: macro 'deb_err' defined here
#define deb_err(args...) dprintk(dvb_usb_debug,0x010,args)
^
drivers/media/usb/dvb-usb/dvb-usb-init.c:350:23: error: expected '}'
MODULE_LICENSE("GPL");
^
drivers/media/usb/dvb-usb/dvb-usb-init.c:288:13: note: to match this '{'
if (!desc) {
^
drivers/media/usb/dvb-usb/dvb-usb-init.c:350:23: error: expected '}'
MODULE_LICENSE("GPL");
^
drivers/media/usb/dvb-usb/dvb-usb-init.c:269:1: note: to match this '{'
{
^
2 warnings and 3 errors generated.
vim +289 drivers/media/usb/dvb-usb/dvb-usb-init.c
261
262 /*
263 * USB
264 */
265 int dvb_usb_device_init(struct usb_interface *intf,
266 const struct dvb_usb_device_properties *props,
267 struct module *owner, struct dvb_usb_device **du,
268 short *adapter_nums)
269 {
270 struct usb_device *udev = interface_to_usbdev(intf);
271 struct dvb_usb_device *d = NULL;
272 const struct dvb_usb_device_description *desc = NULL;
273
274 int ret = -ENOMEM, cold = 0;
275
276 if (du != NULL)
277 *du = NULL;
278
279 d = kzalloc(sizeof(*d), GFP_KERNEL);
280 if (!d) {
281 err("no memory for 'struct dvb_usb_device'");
282 return -ENOMEM;
283 }
284
285 memcpy(&d->props, props, sizeof(struct dvb_usb_device_properties));
286
287 desc = dvb_usb_find_device(udev, &d->props, &cold);
288 if (!desc) {
> 289 deb_err("something went very wrong,
290 device was not found in current device list.\n");
291 ret = -ENODEV;
292 goto error;
293 }
294
295 if (cold) {
296 info("found a %s in cold state, will try to load a firmware",
297 desc->name);
298 ret = dvb_usb_download_firmware(udev, props);
299 if (!props->no_reconnect || ret != 0)
300 goto error;
301 }
302
303 info("found a '%s' in warm state.", desc->name);
304 d->udev = udev;
305 d->desc = desc;
306 d->owner = owner;
307
308 usb_set_intfdata(intf, d);
309
310 ret = dvb_usb_init(d, adapter_nums);
311 if (ret) {
312 info("%s error while loading driver (%d)", desc->name, ret);
313 goto error;
314 }
315
316 if (du)
317 *du = d;
318
319 info("%s is successfully initialized and connected.", desc->name);
320 return 0;
321
322 error:
323 usb_set_intfdata(intf, NULL);
324 kfree(d);
325 return ret;
326 }
327 EXPORT_SYMBOL(dvb_usb_device_init);
328
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 48779 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init
2021-06-21 5:07 [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init Dongliang Mu
` (2 preceding siblings ...)
2021-06-21 7:05 ` [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init kernel test robot
@ 2021-06-21 11:38 ` kernel test robot
3 siblings, 0 replies; 6+ messages in thread
From: kernel test robot @ 2021-06-21 11:38 UTC (permalink / raw)
To: Dongliang Mu, Mauro Carvalho Chehab
Cc: kbuild-all, clang-built-linux, linux-media, Dongliang Mu, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 5877 bytes --]
Hi Dongliang,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on v5.13-rc7 next-20210618]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Dongliang-Mu/media-dvb-usb-break-long-strings-in-dvb_usb_device_init/20210621-130906
base: git://linuxtv.org/media_tree.git master
config: arm64-randconfig-r014-20210621 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project e1adf90826a57b674eee79b071fb46c1f5683cd0)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/0day-ci/linux/commit/2cb920d86e9a83188dc0c72083640ca03e580a33
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Dongliang-Mu/media-dvb-usb-break-long-strings-in-dvb_usb_device_init/20210621-130906
git checkout 2cb920d86e9a83188dc0c72083640ca03e580a33
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/media/usb/dvb-usb/dvb-usb-init.c:289:11: warning: missing terminating '"' character [-Winvalid-pp-token]
deb_err("something went very wrong,
^
drivers/media/usb/dvb-usb/dvb-usb-init.c:290:51: warning: missing terminating '"' character [-Winvalid-pp-token]
device was not found in current device list.\n");
^
>> drivers/media/usb/dvb-usb/dvb-usb-init.c:289:3: error: unterminated function-like macro invocation
deb_err("something went very wrong,
^
drivers/media/usb/dvb-usb/dvb-usb-common.h:22:9: note: macro 'deb_err' defined here
#define deb_err(args...) dprintk(dvb_usb_debug,0x010,args)
^
>> drivers/media/usb/dvb-usb/dvb-usb-init.c:350:23: error: expected '}'
MODULE_LICENSE("GPL");
^
drivers/media/usb/dvb-usb/dvb-usb-init.c:288:13: note: to match this '{'
if (!desc) {
^
>> drivers/media/usb/dvb-usb/dvb-usb-init.c:350:23: error: expected '}'
MODULE_LICENSE("GPL");
^
drivers/media/usb/dvb-usb/dvb-usb-init.c:269:1: note: to match this '{'
{
^
2 warnings and 3 errors generated.
vim +289 drivers/media/usb/dvb-usb/dvb-usb-init.c
261
262 /*
263 * USB
264 */
265 int dvb_usb_device_init(struct usb_interface *intf,
266 const struct dvb_usb_device_properties *props,
267 struct module *owner, struct dvb_usb_device **du,
268 short *adapter_nums)
269 {
270 struct usb_device *udev = interface_to_usbdev(intf);
271 struct dvb_usb_device *d = NULL;
272 const struct dvb_usb_device_description *desc = NULL;
273
274 int ret = -ENOMEM, cold = 0;
275
276 if (du != NULL)
277 *du = NULL;
278
279 d = kzalloc(sizeof(*d), GFP_KERNEL);
280 if (!d) {
281 err("no memory for 'struct dvb_usb_device'");
282 return -ENOMEM;
283 }
284
285 memcpy(&d->props, props, sizeof(struct dvb_usb_device_properties));
286
287 desc = dvb_usb_find_device(udev, &d->props, &cold);
288 if (!desc) {
> 289 deb_err("something went very wrong,
> 290 device was not found in current device list.\n");
291 ret = -ENODEV;
292 goto error;
293 }
294
295 if (cold) {
296 info("found a %s in cold state, will try to load a firmware",
297 desc->name);
298 ret = dvb_usb_download_firmware(udev, props);
299 if (!props->no_reconnect || ret != 0)
300 goto error;
301 }
302
303 info("found a '%s' in warm state.", desc->name);
304 d->udev = udev;
305 d->desc = desc;
306 d->owner = owner;
307
308 usb_set_intfdata(intf, d);
309
310 ret = dvb_usb_init(d, adapter_nums);
311 if (ret) {
312 info("%s error while loading driver (%d)", desc->name, ret);
313 goto error;
314 }
315
316 if (du)
317 *du = d;
318
319 info("%s is successfully initialized and connected.", desc->name);
320 return 0;
321
322 error:
323 usb_set_intfdata(intf, NULL);
324 kfree(d);
325 return ret;
326 }
327 EXPORT_SYMBOL(dvb_usb_device_init);
328
329 void dvb_usb_device_exit(struct usb_interface *intf)
330 {
331 struct dvb_usb_device *d = usb_get_intfdata(intf);
332 const char *default_name = "generic DVB-USB module";
333 char name[40];
334
335 usb_set_intfdata(intf, NULL);
336 if (d != NULL && d->desc != NULL) {
337 strscpy(name, d->desc->name, sizeof(name));
338 dvb_usb_exit(d);
339 } else {
340 strscpy(name, default_name, sizeof(name));
341 }
342 info("%s successfully deinitialized and disconnected.", name);
343
344 }
345 EXPORT_SYMBOL(dvb_usb_device_exit);
346
347 MODULE_VERSION("1.0");
348 MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
349 MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices");
> 350 MODULE_LICENSE("GPL");
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 43316 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/3] media: dvb-usb: move kfree(d) to dvb_usb_device_exit
2021-06-21 5:07 ` [PATCH 2/3] media: dvb-usb: move kfree(d) to dvb_usb_device_exit Dongliang Mu
@ 2021-07-25 13:47 ` Sean Young
0 siblings, 0 replies; 6+ messages in thread
From: Sean Young @ 2021-07-25 13:47 UTC (permalink / raw)
To: Dongliang Mu; +Cc: Mauro Carvalho Chehab, linux-media, linux-kernel
On Mon, Jun 21, 2021 at 01:07:27PM +0800, Dongliang Mu wrote:
> As d is allocated in dvb_usb_device_init, so move to the deallocation of
> d from dvb_usb_exit to dvb_usb_device_exit
There is nothing wrong with this patch, however I'm not sure what this
improves though. The code is just as good/messy as before, is it not?
Sean
>
> Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
> ---
> drivers/media/usb/dvb-usb/dvb-usb-init.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
> index edc477cedaa9..21ad51be4820 100644
> --- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
> +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
> @@ -147,7 +147,6 @@ static int dvb_usb_exit(struct dvb_usb_device *d)
> d->props.priv_destroy(d);
>
> kfree(d->priv);
> - kfree(d);
> return 0;
> }
>
> @@ -333,9 +332,10 @@ void dvb_usb_device_exit(struct usb_interface *intf)
> char name[40];
>
> usb_set_intfdata(intf, NULL);
> - if (d != NULL && d->desc != NULL) {
> + if (d && d->desc) {
> strscpy(name, d->desc->name, sizeof(name));
> dvb_usb_exit(d);
> + kfree(d);
> } else {
> strscpy(name, default_name, sizeof(name));
> }
> --
> 2.25.1
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-07-25 13:47 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-21 5:07 [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init Dongliang Mu
2021-06-21 5:07 ` [PATCH 2/3] media: dvb-usb: move kfree(d) to dvb_usb_device_exit Dongliang Mu
2021-07-25 13:47 ` Sean Young
2021-06-21 5:07 ` [PATCH 3/3] media: dvb-usb: Fix error handling in dvb_usb_i2c_init Dongliang Mu
2021-06-21 7:05 ` [PATCH 1/3] media: dvb-usb: break long strings in dvb_usb_device_init kernel test robot
2021-06-21 11:38 ` kernel test robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).