* [PATCH v2 0/2] hwmon: Add StarFive JH7100 temperature sensor @ 2021-06-24 16:21 Emil Renner Berthing 2021-06-24 16:21 ` [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings Emil Renner Berthing 2021-06-24 16:21 ` [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor Emil Renner Berthing 0 siblings, 2 replies; 7+ messages in thread From: Emil Renner Berthing @ 2021-06-24 16:21 UTC (permalink / raw) To: Jean Delvare, Guenter Roeck, Rob Herring, Jonathan Corbet, Samin Guo Cc: Emil Renner Berthing, linux-hwmon, devicetree, linux-doc, linux-kernel From: Emil Renner Berthing <kernel@esmil.dk> This adds a driver for the temperature sensor on the JH7100, a RISC-V SoC by StarFive Technology Co. Ltd., and most likely also the upcoming JH7110 version. The SoC is used on the BeagleV Starlight board: https://github.com/beagleboard/beaglev-starlight Support for this SoC is not yet upstreamed, but is actively worked on, so it should only be a matter of time before that happens. v2: * Fix checkpatch.pl --strict warnings - Add myself to MAINTAINERS - Fix multiline comments - Use proper case and whitespace for #defines - Add comment to sfctemp::lock mutex. * Remaining comments by Guenter Roeck - Add Documentation/hwmon/sfctemp.rst - Use devm_add_action() and devm_hwmon_device_register_with_info() instead of a driver .remove function. - Don't do test conversion at probe time. - #include <linux/io.h> - Remove unused #defines - Use int return variable in sfctemp_convert(). * Add Samin's Signed-off-by to patch 2/2 Emil Renner Berthing (2): dt-bindings: hwmon: add starfive,jh7100-temp bindings hwmon: (sfctemp) Add StarFive JH7100 temperature sensor .../bindings/hwmon/starfive,jh7100-temp.yaml | 43 +++ Documentation/hwmon/index.rst | 1 + Documentation/hwmon/sfctemp.rst | 32 ++ MAINTAINERS | 8 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/sfctemp.c | 288 ++++++++++++++++++ 7 files changed, 383 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml create mode 100644 Documentation/hwmon/sfctemp.rst create mode 100644 drivers/hwmon/sfctemp.c -- 2.32.0 ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings 2021-06-24 16:21 [PATCH v2 0/2] hwmon: Add StarFive JH7100 temperature sensor Emil Renner Berthing @ 2021-06-24 16:21 ` Emil Renner Berthing 2021-07-14 19:32 ` Rob Herring 2021-06-24 16:21 ` [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor Emil Renner Berthing 1 sibling, 1 reply; 7+ messages in thread From: Emil Renner Berthing @ 2021-06-24 16:21 UTC (permalink / raw) To: Jean Delvare, Guenter Roeck, Rob Herring, Jonathan Corbet, Samin Guo Cc: Emil Renner Berthing, linux-hwmon, devicetree, linux-doc, linux-kernel From: Emil Renner Berthing <kernel@esmil.dk> Add bindings for the temperature sensor on the StarFive JH7100 SoC. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> --- .../bindings/hwmon/starfive,jh7100-temp.yaml | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml new file mode 100644 index 000000000000..5ca52c08d142 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/starfive,jh7100-temp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7100 Temperature Sensor + +maintainers: + - Emil Renner Berthing <kernel@esmil.dk> + +description: | + StarFive Technology Co. JH7100 embedded temperature sensor + +properties: + compatible: + enum: + - starfive,jh7100-temp + + reg: + maxItems: 1 + + '#thermal-sensor-cells': + const: 0 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + tmon: tmon@124a0000 { + compatible = "starfive,jh7100-temp"; + reg = <0x124a0000 0x10000>; + #thermal-sensor-cells = <0>; + interrupts = <122>; + }; -- 2.32.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings 2021-06-24 16:21 ` [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings Emil Renner Berthing @ 2021-07-14 19:32 ` Rob Herring 2021-07-14 19:37 ` Esmil 0 siblings, 1 reply; 7+ messages in thread From: Rob Herring @ 2021-07-14 19:32 UTC (permalink / raw) To: Emil Renner Berthing Cc: Rob Herring, linux-hwmon, Emil Renner Berthing, Samin Guo, linux-kernel, Guenter Roeck, Jean Delvare, Jonathan Corbet, linux-doc, devicetree On Thu, 24 Jun 2021 18:21:07 +0200, Emil Renner Berthing wrote: > From: Emil Renner Berthing <kernel@esmil.dk> > > Add bindings for the temperature sensor on the StarFive JH7100 SoC. > > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> > --- > .../bindings/hwmon/starfive,jh7100-temp.yaml | 43 +++++++++++++++++++ > 1 file changed, 43 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings 2021-07-14 19:32 ` Rob Herring @ 2021-07-14 19:37 ` Esmil 0 siblings, 0 replies; 7+ messages in thread From: Esmil @ 2021-07-14 19:37 UTC (permalink / raw) To: Rob Herring Cc: Rob Herring, linux-hwmon, Samin Guo, Linux Kernel Mailing List, Guenter Roeck, Jean Delvare, Jonathan Corbet, linux-doc, devicetree On Wed, 14 Jul 2021 at 21:32, Rob Herring <robh@kernel.org> wrote: > On Thu, 24 Jun 2021 18:21:07 +0200, Emil Renner Berthing wrote: > > From: Emil Renner Berthing <kernel@esmil.dk> > > > > Add bindings for the temperature sensor on the StarFive JH7100 SoC. > > > > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> > > --- > > .../bindings/hwmon/starfive,jh7100-temp.yaml | 43 +++++++++++++++++++ > > 1 file changed, 43 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml > > > > Reviewed-by: Rob Herring <robh@kernel.org> Thank you! ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor 2021-06-24 16:21 [PATCH v2 0/2] hwmon: Add StarFive JH7100 temperature sensor Emil Renner Berthing 2021-06-24 16:21 ` [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings Emil Renner Berthing @ 2021-06-24 16:21 ` Emil Renner Berthing 2021-06-28 15:08 ` Guenter Roeck 1 sibling, 1 reply; 7+ messages in thread From: Emil Renner Berthing @ 2021-06-24 16:21 UTC (permalink / raw) To: Jean Delvare, Guenter Roeck, Rob Herring, Jonathan Corbet, Samin Guo Cc: Emil Renner Berthing, linux-hwmon, devicetree, linux-doc, linux-kernel From: Emil Renner Berthing <kernel@esmil.dk> Register definitions and conversion constants based on sfctemp driver by Samin in the StarFive 5.10 kernel. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/sfctemp.rst | 32 ++++ MAINTAINERS | 8 + drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/sfctemp.c | 288 ++++++++++++++++++++++++++++++++ 6 files changed, 340 insertions(+) create mode 100644 Documentation/hwmon/sfctemp.rst create mode 100644 drivers/hwmon/sfctemp.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 9ed60fa84cbe..f23308e97d2e 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers sch5627 sch5636 scpi-hwmon + sfctemp sht15 sht21 sht3x diff --git a/Documentation/hwmon/sfctemp.rst b/Documentation/hwmon/sfctemp.rst new file mode 100644 index 000000000000..465edce2fea5 --- /dev/null +++ b/Documentation/hwmon/sfctemp.rst @@ -0,0 +1,32 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver sfctemp +===================== + +Supported chips: + - StarFive JH7100 + +Authors: + - Emil Renner Berthing <kernel@esmil.dk> + +Description +----------- + +This driver adds support for reading the built-in temperature sensor on the +JH7100 RISC-V SoC by StarFive Technology Co. Ltd. + +``sysfs`` interface +------------------- + +The temperature sensor can be enabled, disabled and queried via the standard +hwmon interface in sysfs under ``/sys/class/hwmon/hwmonX`` for some value of +``X``: + +================ ==== ============================================= +Name Perm Description +================ ==== ============================================= +temp1_enable RW Enable or disable temperature sensor. + Automatically enabled by the driver, + but may be disabled to save power. +temp1_input RO Temperature reading in milli-degrees Celsius. +================ ==== ============================================= diff --git a/MAINTAINERS b/MAINTAINERS index 8c5ee008301a..a7d25a672270 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16535,6 +16535,14 @@ L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/sfc/ +SFCTEMP HWMON DRIVER +M: Emil Renner Berthing <kernel@esmil.dk> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml +F: Documentation/hwmon/sfctemp.rst +F: drivers/hwmon/sfctemp.c + SFF/SFP/SFP+ MODULE SUPPORT M: Russell King <linux@armlinux.org.uk> L: netdev@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 87624902ea80..7da8fd8beb06 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1751,6 +1751,16 @@ config SENSORS_STTS751 This driver can also be built as a module. If so, the module will be called stts751. +config SENSORS_SFCTEMP + tristate "Starfive JH7100 temperature sensor" + depends on OF && (RISCV || COMPILE_TEST) + help + If you say yes here you get support for temperature sensor + on the Starfive JH7100 SoC. + + This driver can also be built as a module. If so, the module + will be called sfctemp. + config SENSORS_SMM665 tristate "Summit Microelectronics SMM665" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 59e78bc212cf..3723eb580bf3 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o +obj-$(CONFIG_SENSORS_SFCTEMP) += sfctemp.o obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SHT21) += sht21.o diff --git a/drivers/hwmon/sfctemp.c b/drivers/hwmon/sfctemp.c new file mode 100644 index 000000000000..4328aacf9272 --- /dev/null +++ b/drivers/hwmon/sfctemp.c @@ -0,0 +1,288 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> + * Copyright (C) 2021 Samin Guo <samin.guo@starfivetech.com> + */ +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/hwmon.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +/* + * TempSensor reset. The RSTN can be de-asserted once the analog core has + * powered up. Trst(min 100ns) + * 0:reset 1:de-assert + */ +#define SFCTEMP_RSTN BIT(0) + +/* + * TempSensor analog core power down. The analog core will be powered up + * Tpu(min 50us) after PD is de-asserted. RSTN should be held low until the + * analog core is powered up. + * 0:power up 1:power down + */ +#define SFCTEMP_PD BIT(1) + +/* + * TempSensor start conversion enable. + * 0:disable 1:enable + */ +#define SFCTEMP_RUN BIT(2) + +/* + * TempSensor conversion value output. + * Temp(C)=DOUT*Y/4094 - K + */ +#define SFCTEMP_DOUT_POS 16 +#define SFCTEMP_DOUT_MSK GENMASK(27, 16) + +/* DOUT to Celcius conversion constants */ +#define SFCTEMP_Y1000 237500L +#define SFCTEMP_Z 4094L +#define SFCTEMP_K1000 81100L + +struct sfctemp { + /* serialize access to hardware register and enabled below */ + struct mutex lock; + struct completion conversion_done; + void __iomem *regs; + bool enabled; +}; + +static irqreturn_t sfctemp_isr(int irq, void *data) +{ + struct sfctemp *sfctemp = data; + + complete(&sfctemp->conversion_done); + return IRQ_HANDLED; +} + +static void sfctemp_power_up(struct sfctemp *sfctemp) +{ + /* make sure we're powered down first */ + writel(SFCTEMP_PD, sfctemp->regs); + udelay(1); + + writel(0, sfctemp->regs); + /* wait t_pu(50us) + t_rst(100ns) */ + usleep_range(60, 200); + + /* de-assert reset */ + writel(SFCTEMP_RSTN, sfctemp->regs); + udelay(1); /* wait t_su(500ps) */ +} + +static void sfctemp_power_down(struct sfctemp *sfctemp) +{ + writel(SFCTEMP_PD, sfctemp->regs); +} + +static void sfctemp_run_single(struct sfctemp *sfctemp) +{ + writel(SFCTEMP_RSTN | SFCTEMP_RUN, sfctemp->regs); + udelay(1); + writel(SFCTEMP_RSTN, sfctemp->regs); +} + +static int sfctemp_enable(struct sfctemp *sfctemp) +{ + mutex_lock(&sfctemp->lock); + if (sfctemp->enabled) + goto done; + + sfctemp_power_up(sfctemp); + sfctemp->enabled = true; +done: + mutex_unlock(&sfctemp->lock); + return 0; +} + +static int sfctemp_disable(struct sfctemp *sfctemp) +{ + mutex_lock(&sfctemp->lock); + if (!sfctemp->enabled) + goto done; + + sfctemp_power_down(sfctemp); + sfctemp->enabled = false; +done: + mutex_unlock(&sfctemp->lock); + return 0; +} + +static void sfctemp_disable_action(void *data) +{ + sfctemp_disable(data); +} + +static int sfctemp_convert(struct sfctemp *sfctemp, long *val) +{ + int ret; + + mutex_lock(&sfctemp->lock); + if (!sfctemp->enabled) { + ret = -ENODATA; + goto out; + } + + sfctemp_run_single(sfctemp); + + ret = wait_for_completion_interruptible_timeout(&sfctemp->conversion_done, + msecs_to_jiffies(10)); + if (ret < 0) + goto out; + + /* calculate temperature in milli Celcius */ + *val = (long)((readl(sfctemp->regs) & SFCTEMP_DOUT_MSK) >> SFCTEMP_DOUT_POS) + * SFCTEMP_Y1000 / SFCTEMP_Z - SFCTEMP_K1000; + + ret = 0; +out: + mutex_unlock(&sfctemp->lock); + return ret; +} + +static umode_t sfctemp_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_enable: + return 0644; + case hwmon_temp_input: + return 0444; + } + return 0; + default: + return 0; + } +} + +static int sfctemp_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct sfctemp *sfctemp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_enable: + *val = sfctemp->enabled; + return 0; + case hwmon_temp_input: + return sfctemp_convert(sfctemp, val); + } + return -EINVAL; + default: + return -EINVAL; + } +} + +static int sfctemp_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct sfctemp *sfctemp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_enable: + if (val == 0) + return sfctemp_disable(sfctemp); + if (val == 1) + return sfctemp_enable(sfctemp); + break; + } + return -EINVAL; + default: + return -EINVAL; + } +} + +static const struct hwmon_channel_info *sfctemp_info[] = { + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT), + NULL +}; + +static const struct hwmon_ops sfctemp_hwmon_ops = { + .is_visible = sfctemp_is_visible, + .read = sfctemp_read, + .write = sfctemp_write, +}; + +static const struct hwmon_chip_info sfctemp_chip_info = { + .ops = &sfctemp_hwmon_ops, + .info = sfctemp_info, +}; + +static int sfctemp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device *hwmon_dev; + struct resource *mem; + struct sfctemp *sfctemp; + int ret; + + sfctemp = devm_kzalloc(dev, sizeof(*sfctemp), GFP_KERNEL); + if (!sfctemp) + return -ENOMEM; + + dev_set_drvdata(dev, sfctemp); + mutex_init(&sfctemp->lock); + init_completion(&sfctemp->conversion_done); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sfctemp->regs = devm_ioremap_resource(dev, mem); + if (IS_ERR(sfctemp->regs)) + return PTR_ERR(sfctemp->regs); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + + ret = devm_request_irq(dev, ret, sfctemp_isr, + IRQF_SHARED, pdev->name, sfctemp); + if (ret) { + dev_err(dev, "request irq failed: %d\n", ret); + return ret; + } + + ret = devm_add_action(dev, sfctemp_disable_action, sfctemp); + if (ret) + return ret; + + ret = sfctemp_enable(sfctemp); + if (ret) + return ret; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, pdev->name, sfctemp, + &sfctemp_chip_info, NULL); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct of_device_id sfctemp_of_match[] = { + { .compatible = "starfive,jh7100-temp" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, sfctemp_of_match); + +static struct platform_driver sfctemp_driver = { + .driver = { + .name = "sfctemp", + .of_match_table = of_match_ptr(sfctemp_of_match), + }, + .probe = sfctemp_probe, +}; +module_platform_driver(sfctemp_driver); + +MODULE_AUTHOR("Emil Renner Berthing"); +MODULE_DESCRIPTION("StarFive JH7100 temperature sensor driver"); +MODULE_LICENSE("GPL"); -- 2.32.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor 2021-06-24 16:21 ` [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor Emil Renner Berthing @ 2021-06-28 15:08 ` Guenter Roeck 2021-06-28 15:13 ` Esmil 0 siblings, 1 reply; 7+ messages in thread From: Guenter Roeck @ 2021-06-28 15:08 UTC (permalink / raw) To: Emil Renner Berthing Cc: Jean Delvare, Rob Herring, Jonathan Corbet, Samin Guo, Emil Renner Berthing, linux-hwmon, devicetree, linux-doc, linux-kernel On Thu, Jun 24, 2021 at 06:21:08PM +0200, Emil Renner Berthing wrote: > From: Emil Renner Berthing <kernel@esmil.dk> > > Register definitions and conversion constants based on sfctemp driver by > Samin in the StarFive 5.10 kernel. > > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> > Signed-off-by: Samin Guo <samin.guo@starfivetech.com> > --- > Documentation/hwmon/index.rst | 1 + > Documentation/hwmon/sfctemp.rst | 32 ++++ > MAINTAINERS | 8 + > drivers/hwmon/Kconfig | 10 ++ > drivers/hwmon/Makefile | 1 + > drivers/hwmon/sfctemp.c | 288 ++++++++++++++++++++++++++++++++ > 6 files changed, 340 insertions(+) > create mode 100644 Documentation/hwmon/sfctemp.rst > create mode 100644 drivers/hwmon/sfctemp.c > > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > index 9ed60fa84cbe..f23308e97d2e 100644 > --- a/Documentation/hwmon/index.rst > +++ b/Documentation/hwmon/index.rst > @@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers > sch5627 > sch5636 > scpi-hwmon > + sfctemp > sht15 > sht21 > sht3x > diff --git a/Documentation/hwmon/sfctemp.rst b/Documentation/hwmon/sfctemp.rst > new file mode 100644 > index 000000000000..465edce2fea5 > --- /dev/null > +++ b/Documentation/hwmon/sfctemp.rst > @@ -0,0 +1,32 @@ > +.. SPDX-License-Identifier: GPL-2.0 > + > +Kernel driver sfctemp > +===================== > + > +Supported chips: > + - StarFive JH7100 > + > +Authors: > + - Emil Renner Berthing <kernel@esmil.dk> > + > +Description > +----------- > + > +This driver adds support for reading the built-in temperature sensor on the > +JH7100 RISC-V SoC by StarFive Technology Co. Ltd. > + > +``sysfs`` interface > +------------------- > + > +The temperature sensor can be enabled, disabled and queried via the standard > +hwmon interface in sysfs under ``/sys/class/hwmon/hwmonX`` for some value of > +``X``: > + > +================ ==== ============================================= > +Name Perm Description > +================ ==== ============================================= > +temp1_enable RW Enable or disable temperature sensor. > + Automatically enabled by the driver, > + but may be disabled to save power. > +temp1_input RO Temperature reading in milli-degrees Celsius. > +================ ==== ============================================= > diff --git a/MAINTAINERS b/MAINTAINERS > index 8c5ee008301a..a7d25a672270 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -16535,6 +16535,14 @@ L: netdev@vger.kernel.org > S: Supported > F: drivers/net/ethernet/sfc/ > > +SFCTEMP HWMON DRIVER > +M: Emil Renner Berthing <kernel@esmil.dk> > +L: linux-hwmon@vger.kernel.org > +S: Maintained > +F: Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml > +F: Documentation/hwmon/sfctemp.rst > +F: drivers/hwmon/sfctemp.c > + > SFF/SFP/SFP+ MODULE SUPPORT > M: Russell King <linux@armlinux.org.uk> > L: netdev@vger.kernel.org > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 87624902ea80..7da8fd8beb06 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -1751,6 +1751,16 @@ config SENSORS_STTS751 > This driver can also be built as a module. If so, the module > will be called stts751. > > +config SENSORS_SFCTEMP > + tristate "Starfive JH7100 temperature sensor" > + depends on OF && (RISCV || COMPILE_TEST) > + help > + If you say yes here you get support for temperature sensor > + on the Starfive JH7100 SoC. > + > + This driver can also be built as a module. If so, the module > + will be called sfctemp. > + > config SENSORS_SMM665 > tristate "Summit Microelectronics SMM665" > depends on I2C > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 59e78bc212cf..3723eb580bf3 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o > obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o > obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o > obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o > +obj-$(CONFIG_SENSORS_SFCTEMP) += sfctemp.o > obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o > obj-$(CONFIG_SENSORS_SHT15) += sht15.o > obj-$(CONFIG_SENSORS_SHT21) += sht21.o > diff --git a/drivers/hwmon/sfctemp.c b/drivers/hwmon/sfctemp.c > new file mode 100644 > index 000000000000..4328aacf9272 > --- /dev/null > +++ b/drivers/hwmon/sfctemp.c > @@ -0,0 +1,288 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> > + * Copyright (C) 2021 Samin Guo <samin.guo@starfivetech.com> > + */ > +#include <linux/completion.h> > +#include <linux/delay.h> > +#include <linux/hwmon.h> > +#include <linux/interrupt.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > + > +/* > + * TempSensor reset. The RSTN can be de-asserted once the analog core has > + * powered up. Trst(min 100ns) > + * 0:reset 1:de-assert > + */ > +#define SFCTEMP_RSTN BIT(0) > + > +/* > + * TempSensor analog core power down. The analog core will be powered up > + * Tpu(min 50us) after PD is de-asserted. RSTN should be held low until the > + * analog core is powered up. > + * 0:power up 1:power down > + */ > +#define SFCTEMP_PD BIT(1) > + > +/* > + * TempSensor start conversion enable. > + * 0:disable 1:enable > + */ > +#define SFCTEMP_RUN BIT(2) > + > +/* > + * TempSensor conversion value output. > + * Temp(C)=DOUT*Y/4094 - K > + */ > +#define SFCTEMP_DOUT_POS 16 > +#define SFCTEMP_DOUT_MSK GENMASK(27, 16) > + > +/* DOUT to Celcius conversion constants */ > +#define SFCTEMP_Y1000 237500L > +#define SFCTEMP_Z 4094L > +#define SFCTEMP_K1000 81100L > + > +struct sfctemp { > + /* serialize access to hardware register and enabled below */ > + struct mutex lock; > + struct completion conversion_done; > + void __iomem *regs; > + bool enabled; > +}; > + > +static irqreturn_t sfctemp_isr(int irq, void *data) > +{ > + struct sfctemp *sfctemp = data; > + > + complete(&sfctemp->conversion_done); > + return IRQ_HANDLED; > +} > + > +static void sfctemp_power_up(struct sfctemp *sfctemp) > +{ > + /* make sure we're powered down first */ > + writel(SFCTEMP_PD, sfctemp->regs); > + udelay(1); > + > + writel(0, sfctemp->regs); > + /* wait t_pu(50us) + t_rst(100ns) */ > + usleep_range(60, 200); > + > + /* de-assert reset */ > + writel(SFCTEMP_RSTN, sfctemp->regs); > + udelay(1); /* wait t_su(500ps) */ > +} > + > +static void sfctemp_power_down(struct sfctemp *sfctemp) > +{ > + writel(SFCTEMP_PD, sfctemp->regs); > +} > + > +static void sfctemp_run_single(struct sfctemp *sfctemp) > +{ > + writel(SFCTEMP_RSTN | SFCTEMP_RUN, sfctemp->regs); > + udelay(1); > + writel(SFCTEMP_RSTN, sfctemp->regs); > +} > + > +static int sfctemp_enable(struct sfctemp *sfctemp) > +{ > + mutex_lock(&sfctemp->lock); > + if (sfctemp->enabled) > + goto done; > + > + sfctemp_power_up(sfctemp); > + sfctemp->enabled = true; > +done: > + mutex_unlock(&sfctemp->lock); > + return 0; > +} > + > +static int sfctemp_disable(struct sfctemp *sfctemp) > +{ > + mutex_lock(&sfctemp->lock); > + if (!sfctemp->enabled) > + goto done; > + > + sfctemp_power_down(sfctemp); > + sfctemp->enabled = false; > +done: > + mutex_unlock(&sfctemp->lock); > + return 0; > +} > + > +static void sfctemp_disable_action(void *data) > +{ > + sfctemp_disable(data); > +} > + > +static int sfctemp_convert(struct sfctemp *sfctemp, long *val) > +{ > + int ret; > + > + mutex_lock(&sfctemp->lock); > + if (!sfctemp->enabled) { > + ret = -ENODATA; > + goto out; > + } > + > + sfctemp_run_single(sfctemp); > + > + ret = wait_for_completion_interruptible_timeout(&sfctemp->conversion_done, > + msecs_to_jiffies(10)); > + if (ret < 0) > + goto out; Does this need to handle timeouts ? if (ret == 0) return -ETIMEDOUT; > + > + /* calculate temperature in milli Celcius */ > + *val = (long)((readl(sfctemp->regs) & SFCTEMP_DOUT_MSK) >> SFCTEMP_DOUT_POS) > + * SFCTEMP_Y1000 / SFCTEMP_Z - SFCTEMP_K1000; > + > + ret = 0; > +out: > + mutex_unlock(&sfctemp->lock); > + return ret; > +} > + > +static umode_t sfctemp_is_visible(const void *data, enum hwmon_sensor_types type, > + u32 attr, int channel) > +{ > + switch (type) { > + case hwmon_temp: > + switch (attr) { > + case hwmon_temp_enable: > + return 0644; > + case hwmon_temp_input: > + return 0444; > + } > + return 0; > + default: > + return 0; > + } > +} > + > +static int sfctemp_read(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long *val) > +{ > + struct sfctemp *sfctemp = dev_get_drvdata(dev); > + > + switch (type) { > + case hwmon_temp: > + switch (attr) { > + case hwmon_temp_enable: > + *val = sfctemp->enabled; > + return 0; > + case hwmon_temp_input: > + return sfctemp_convert(sfctemp, val); > + } > + return -EINVAL; > + default: > + return -EINVAL; > + } > +} > + > +static int sfctemp_write(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long val) > +{ > + struct sfctemp *sfctemp = dev_get_drvdata(dev); > + > + switch (type) { > + case hwmon_temp: > + switch (attr) { > + case hwmon_temp_enable: > + if (val == 0) > + return sfctemp_disable(sfctemp); > + if (val == 1) > + return sfctemp_enable(sfctemp); > + break; > + } > + return -EINVAL; > + default: > + return -EINVAL; > + } > +} > + > +static const struct hwmon_channel_info *sfctemp_info[] = { > + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), > + HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT), > + NULL > +}; > + > +static const struct hwmon_ops sfctemp_hwmon_ops = { > + .is_visible = sfctemp_is_visible, > + .read = sfctemp_read, > + .write = sfctemp_write, > +}; > + > +static const struct hwmon_chip_info sfctemp_chip_info = { > + .ops = &sfctemp_hwmon_ops, > + .info = sfctemp_info, > +}; > + > +static int sfctemp_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct device *hwmon_dev; > + struct resource *mem; > + struct sfctemp *sfctemp; > + int ret; > + > + sfctemp = devm_kzalloc(dev, sizeof(*sfctemp), GFP_KERNEL); > + if (!sfctemp) > + return -ENOMEM; > + > + dev_set_drvdata(dev, sfctemp); > + mutex_init(&sfctemp->lock); > + init_completion(&sfctemp->conversion_done); > + > + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + sfctemp->regs = devm_ioremap_resource(dev, mem); > + if (IS_ERR(sfctemp->regs)) > + return PTR_ERR(sfctemp->regs); > + > + ret = platform_get_irq(pdev, 0); > + if (ret < 0) > + return ret; > + > + ret = devm_request_irq(dev, ret, sfctemp_isr, > + IRQF_SHARED, pdev->name, sfctemp); > + if (ret) { > + dev_err(dev, "request irq failed: %d\n", ret); > + return ret; > + } > + > + ret = devm_add_action(dev, sfctemp_disable_action, sfctemp); > + if (ret) > + return ret; > + > + ret = sfctemp_enable(sfctemp); > + if (ret) > + return ret; > + > + hwmon_dev = devm_hwmon_device_register_with_info(dev, pdev->name, sfctemp, > + &sfctemp_chip_info, NULL); > + return PTR_ERR_OR_ZERO(hwmon_dev); > +} > + > +static const struct of_device_id sfctemp_of_match[] = { > + { .compatible = "starfive,jh7100-temp" }, > + { /* sentinel */ } > +}; > + > +MODULE_DEVICE_TABLE(of, sfctemp_of_match); > + > +static struct platform_driver sfctemp_driver = { > + .driver = { > + .name = "sfctemp", > + .of_match_table = of_match_ptr(sfctemp_of_match), > + }, > + .probe = sfctemp_probe, > +}; > +module_platform_driver(sfctemp_driver); > + > +MODULE_AUTHOR("Emil Renner Berthing"); > +MODULE_DESCRIPTION("StarFive JH7100 temperature sensor driver"); > +MODULE_LICENSE("GPL"); > -- > 2.32.0 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor 2021-06-28 15:08 ` Guenter Roeck @ 2021-06-28 15:13 ` Esmil 0 siblings, 0 replies; 7+ messages in thread From: Esmil @ 2021-06-28 15:13 UTC (permalink / raw) To: Guenter Roeck Cc: Jean Delvare, Rob Herring, Jonathan Corbet, Samin Guo, linux-hwmon, devicetree, linux-doc, Linux Kernel Mailing List On Mon, 28 Jun 2021 at 17:08, Guenter Roeck <linux@roeck-us.net> wrote: > On Thu, Jun 24, 2021 at 06:21:08PM +0200, Emil Renner Berthing wrote: > > From: Emil Renner Berthing <kernel@esmil.dk> > > > > Register definitions and conversion constants based on sfctemp driver by > > Samin in the StarFive 5.10 kernel. > > > > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> > > Signed-off-by: Samin Guo <samin.guo@starfivetech.com> > > --- > > Documentation/hwmon/index.rst | 1 + > > Documentation/hwmon/sfctemp.rst | 32 ++++ > > MAINTAINERS | 8 + > > drivers/hwmon/Kconfig | 10 ++ > > drivers/hwmon/Makefile | 1 + > > drivers/hwmon/sfctemp.c | 288 ++++++++++++++++++++++++++++++++ > > 6 files changed, 340 insertions(+) > > create mode 100644 Documentation/hwmon/sfctemp.rst > > create mode 100644 drivers/hwmon/sfctemp.c > > > > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > > index 9ed60fa84cbe..f23308e97d2e 100644 > > --- a/Documentation/hwmon/index.rst > > +++ b/Documentation/hwmon/index.rst > > @@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers > > sch5627 > > sch5636 > > scpi-hwmon > > + sfctemp > > sht15 > > sht21 > > sht3x > > diff --git a/Documentation/hwmon/sfctemp.rst b/Documentation/hwmon/sfctemp.rst > > new file mode 100644 > > index 000000000000..465edce2fea5 > > --- /dev/null > > +++ b/Documentation/hwmon/sfctemp.rst > > @@ -0,0 +1,32 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +Kernel driver sfctemp > > +===================== > > + > > +Supported chips: > > + - StarFive JH7100 > > + > > +Authors: > > + - Emil Renner Berthing <kernel@esmil.dk> > > + > > +Description > > +----------- > > + > > +This driver adds support for reading the built-in temperature sensor on the > > +JH7100 RISC-V SoC by StarFive Technology Co. Ltd. > > + > > +``sysfs`` interface > > +------------------- > > + > > +The temperature sensor can be enabled, disabled and queried via the standard > > +hwmon interface in sysfs under ``/sys/class/hwmon/hwmonX`` for some value of > > +``X``: > > + > > +================ ==== ============================================= > > +Name Perm Description > > +================ ==== ============================================= > > +temp1_enable RW Enable or disable temperature sensor. > > + Automatically enabled by the driver, > > + but may be disabled to save power. > > +temp1_input RO Temperature reading in milli-degrees Celsius. > > +================ ==== ============================================= > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 8c5ee008301a..a7d25a672270 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -16535,6 +16535,14 @@ L: netdev@vger.kernel.org > > S: Supported > > F: drivers/net/ethernet/sfc/ > > > > +SFCTEMP HWMON DRIVER > > +M: Emil Renner Berthing <kernel@esmil.dk> > > +L: linux-hwmon@vger.kernel.org > > +S: Maintained > > +F: Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml > > +F: Documentation/hwmon/sfctemp.rst > > +F: drivers/hwmon/sfctemp.c > > + > > SFF/SFP/SFP+ MODULE SUPPORT > > M: Russell King <linux@armlinux.org.uk> > > L: netdev@vger.kernel.org > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > > index 87624902ea80..7da8fd8beb06 100644 > > --- a/drivers/hwmon/Kconfig > > +++ b/drivers/hwmon/Kconfig > > @@ -1751,6 +1751,16 @@ config SENSORS_STTS751 > > This driver can also be built as a module. If so, the module > > will be called stts751. > > > > +config SENSORS_SFCTEMP > > + tristate "Starfive JH7100 temperature sensor" > > + depends on OF && (RISCV || COMPILE_TEST) > > + help > > + If you say yes here you get support for temperature sensor > > + on the Starfive JH7100 SoC. > > + > > + This driver can also be built as a module. If so, the module > > + will be called sfctemp. > > + > > config SENSORS_SMM665 > > tristate "Summit Microelectronics SMM665" > > depends on I2C > > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > > index 59e78bc212cf..3723eb580bf3 100644 > > --- a/drivers/hwmon/Makefile > > +++ b/drivers/hwmon/Makefile > > @@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o > > obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o > > obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o > > obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o > > +obj-$(CONFIG_SENSORS_SFCTEMP) += sfctemp.o > > obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o > > obj-$(CONFIG_SENSORS_SHT15) += sht15.o > > obj-$(CONFIG_SENSORS_SHT21) += sht21.o > > diff --git a/drivers/hwmon/sfctemp.c b/drivers/hwmon/sfctemp.c > > new file mode 100644 > > index 000000000000..4328aacf9272 > > --- /dev/null > > +++ b/drivers/hwmon/sfctemp.c > > @@ -0,0 +1,288 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> > > + * Copyright (C) 2021 Samin Guo <samin.guo@starfivetech.com> > > + */ > > +#include <linux/completion.h> > > +#include <linux/delay.h> > > +#include <linux/hwmon.h> > > +#include <linux/interrupt.h> > > +#include <linux/io.h> > > +#include <linux/module.h> > > +#include <linux/mutex.h> > > +#include <linux/of.h> > > +#include <linux/platform_device.h> > > + > > +/* > > + * TempSensor reset. The RSTN can be de-asserted once the analog core has > > + * powered up. Trst(min 100ns) > > + * 0:reset 1:de-assert > > + */ > > +#define SFCTEMP_RSTN BIT(0) > > + > > +/* > > + * TempSensor analog core power down. The analog core will be powered up > > + * Tpu(min 50us) after PD is de-asserted. RSTN should be held low until the > > + * analog core is powered up. > > + * 0:power up 1:power down > > + */ > > +#define SFCTEMP_PD BIT(1) > > + > > +/* > > + * TempSensor start conversion enable. > > + * 0:disable 1:enable > > + */ > > +#define SFCTEMP_RUN BIT(2) > > + > > +/* > > + * TempSensor conversion value output. > > + * Temp(C)=DOUT*Y/4094 - K > > + */ > > +#define SFCTEMP_DOUT_POS 16 > > +#define SFCTEMP_DOUT_MSK GENMASK(27, 16) > > + > > +/* DOUT to Celcius conversion constants */ > > +#define SFCTEMP_Y1000 237500L > > +#define SFCTEMP_Z 4094L > > +#define SFCTEMP_K1000 81100L > > + > > +struct sfctemp { > > + /* serialize access to hardware register and enabled below */ > > + struct mutex lock; > > + struct completion conversion_done; > > + void __iomem *regs; > > + bool enabled; > > +}; > > + > > +static irqreturn_t sfctemp_isr(int irq, void *data) > > +{ > > + struct sfctemp *sfctemp = data; > > + > > + complete(&sfctemp->conversion_done); > > + return IRQ_HANDLED; > > +} > > + > > +static void sfctemp_power_up(struct sfctemp *sfctemp) > > +{ > > + /* make sure we're powered down first */ > > + writel(SFCTEMP_PD, sfctemp->regs); > > + udelay(1); > > + > > + writel(0, sfctemp->regs); > > + /* wait t_pu(50us) + t_rst(100ns) */ > > + usleep_range(60, 200); > > + > > + /* de-assert reset */ > > + writel(SFCTEMP_RSTN, sfctemp->regs); > > + udelay(1); /* wait t_su(500ps) */ > > +} > > + > > +static void sfctemp_power_down(struct sfctemp *sfctemp) > > +{ > > + writel(SFCTEMP_PD, sfctemp->regs); > > +} > > + > > +static void sfctemp_run_single(struct sfctemp *sfctemp) > > +{ > > + writel(SFCTEMP_RSTN | SFCTEMP_RUN, sfctemp->regs); > > + udelay(1); > > + writel(SFCTEMP_RSTN, sfctemp->regs); > > +} > > + > > +static int sfctemp_enable(struct sfctemp *sfctemp) > > +{ > > + mutex_lock(&sfctemp->lock); > > + if (sfctemp->enabled) > > + goto done; > > + > > + sfctemp_power_up(sfctemp); > > + sfctemp->enabled = true; > > +done: > > + mutex_unlock(&sfctemp->lock); > > + return 0; > > +} > > + > > +static int sfctemp_disable(struct sfctemp *sfctemp) > > +{ > > + mutex_lock(&sfctemp->lock); > > + if (!sfctemp->enabled) > > + goto done; > > + > > + sfctemp_power_down(sfctemp); > > + sfctemp->enabled = false; > > +done: > > + mutex_unlock(&sfctemp->lock); > > + return 0; > > +} > > + > > +static void sfctemp_disable_action(void *data) > > +{ > > + sfctemp_disable(data); > > +} > > + > > +static int sfctemp_convert(struct sfctemp *sfctemp, long *val) > > +{ > > + int ret; > > + > > + mutex_lock(&sfctemp->lock); > > + if (!sfctemp->enabled) { > > + ret = -ENODATA; > > + goto out; > > + } > > + > > + sfctemp_run_single(sfctemp); > > + > > + ret = wait_for_completion_interruptible_timeout(&sfctemp->conversion_done, > > + msecs_to_jiffies(10)); > > + if (ret < 0) > > + goto out; > > Does this need to handle timeouts ? > > if (ret == 0) > return -ETIMEDOUT; Oh yes. Good catch. I thought it would automatically return -ETIMEDOUT on timeout. I'll add that to the next version. > > + ret = 0; > > +out: > > + mutex_unlock(&sfctemp->lock); > > + return ret; > > +} > > + > > +static umode_t sfctemp_is_visible(const void *data, enum hwmon_sensor_types type, > > + u32 attr, int channel) > > +{ > > + switch (type) { > > + case hwmon_temp: > > + switch (attr) { > > + case hwmon_temp_enable: > > + return 0644; > > + case hwmon_temp_input: > > + return 0444; > > + } > > + return 0; > > + default: > > + return 0; > > + } > > +} > > + > > +static int sfctemp_read(struct device *dev, enum hwmon_sensor_types type, > > + u32 attr, int channel, long *val) > > +{ > > + struct sfctemp *sfctemp = dev_get_drvdata(dev); > > + > > + switch (type) { > > + case hwmon_temp: > > + switch (attr) { > > + case hwmon_temp_enable: > > + *val = sfctemp->enabled; > > + return 0; > > + case hwmon_temp_input: > > + return sfctemp_convert(sfctemp, val); > > + } > > + return -EINVAL; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int sfctemp_write(struct device *dev, enum hwmon_sensor_types type, > > + u32 attr, int channel, long val) > > +{ > > + struct sfctemp *sfctemp = dev_get_drvdata(dev); > > + > > + switch (type) { > > + case hwmon_temp: > > + switch (attr) { > > + case hwmon_temp_enable: > > + if (val == 0) > > + return sfctemp_disable(sfctemp); > > + if (val == 1) > > + return sfctemp_enable(sfctemp); > > + break; > > + } > > + return -EINVAL; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static const struct hwmon_channel_info *sfctemp_info[] = { > > + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), > > + HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT), > > + NULL > > +}; > > + > > +static const struct hwmon_ops sfctemp_hwmon_ops = { > > + .is_visible = sfctemp_is_visible, > > + .read = sfctemp_read, > > + .write = sfctemp_write, > > +}; > > + > > +static const struct hwmon_chip_info sfctemp_chip_info = { > > + .ops = &sfctemp_hwmon_ops, > > + .info = sfctemp_info, > > +}; > > + > > +static int sfctemp_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct device *hwmon_dev; > > + struct resource *mem; > > + struct sfctemp *sfctemp; > > + int ret; > > + > > + sfctemp = devm_kzalloc(dev, sizeof(*sfctemp), GFP_KERNEL); > > + if (!sfctemp) > > + return -ENOMEM; > > + > > + dev_set_drvdata(dev, sfctemp); > > + mutex_init(&sfctemp->lock); > > + init_completion(&sfctemp->conversion_done); > > + > > + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + sfctemp->regs = devm_ioremap_resource(dev, mem); > > + if (IS_ERR(sfctemp->regs)) > > + return PTR_ERR(sfctemp->regs); > > + > > + ret = platform_get_irq(pdev, 0); > > + if (ret < 0) > > + return ret; > > + > > + ret = devm_request_irq(dev, ret, sfctemp_isr, > > + IRQF_SHARED, pdev->name, sfctemp); > > + if (ret) { > > + dev_err(dev, "request irq failed: %d\n", ret); > > + return ret; > > + } > > + > > + ret = devm_add_action(dev, sfctemp_disable_action, sfctemp); > > + if (ret) > > + return ret; > > + > > + ret = sfctemp_enable(sfctemp); > > + if (ret) > > + return ret; > > + > > + hwmon_dev = devm_hwmon_device_register_with_info(dev, pdev->name, sfctemp, > > + &sfctemp_chip_info, NULL); > > + return PTR_ERR_OR_ZERO(hwmon_dev); > > +} > > + > > +static const struct of_device_id sfctemp_of_match[] = { > > + { .compatible = "starfive,jh7100-temp" }, > > + { /* sentinel */ } > > +}; > > + > > +MODULE_DEVICE_TABLE(of, sfctemp_of_match); > > + > > +static struct platform_driver sfctemp_driver = { > > + .driver = { > > + .name = "sfctemp", > > + .of_match_table = of_match_ptr(sfctemp_of_match), > > + }, > > + .probe = sfctemp_probe, > > +}; > > +module_platform_driver(sfctemp_driver); > > + > > +MODULE_AUTHOR("Emil Renner Berthing"); > > +MODULE_DESCRIPTION("StarFive JH7100 temperature sensor driver"); > > +MODULE_LICENSE("GPL"); > > -- > > 2.32.0 > > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-07-14 19:37 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-06-24 16:21 [PATCH v2 0/2] hwmon: Add StarFive JH7100 temperature sensor Emil Renner Berthing 2021-06-24 16:21 ` [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings Emil Renner Berthing 2021-07-14 19:32 ` Rob Herring 2021-07-14 19:37 ` Esmil 2021-06-24 16:21 ` [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor Emil Renner Berthing 2021-06-28 15:08 ` Guenter Roeck 2021-06-28 15:13 ` Esmil
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).