[PATCH v8 1/3] MIPS: Loongson64: Add Loongson-2K1000 reset platform driver

[PATCH v8 1/3] MIPS: Loongson64: Add Loongson-2K1000 reset platform driver

[Qing Zhang]

Add power management register operations to support reboot and poweroff.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
---

v7-v8:
delete unnecessary pointer casts
---
 drivers/platform/mips/Kconfig      |  6 ++++
 drivers/platform/mips/Makefile     |  1 +
 drivers/platform/mips/ls2k-reset.c | 53 ++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+)
 create mode 100644 drivers/platform/mips/ls2k-reset.c

diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 8ac149173c64..d421e1482395 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -30,4 +30,10 @@ config RS780E_ACPI
 	help
 	  Loongson RS780E PCH ACPI Controller driver.
 
+config LS2K_RESET
+	bool "Loongson-2K1000 Reset Controller"
+	depends on MACH_LOONGSON64 || COMPILE_TEST
+	help
+	  Loongson-2K1000 Reset Controller driver.
+
 endif # MIPS_PLATFORM_DEVICES
diff --git a/drivers/platform/mips/Makefile b/drivers/platform/mips/Makefile
index 178149098777..4c71444e453a 100644
--- a/drivers/platform/mips/Makefile
+++ b/drivers/platform/mips/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o
 obj-$(CONFIG_RS780E_ACPI) += rs780e-acpi.o
+obj-$(CONFIG_LS2K_RESET) += ls2k-reset.o
diff --git a/drivers/platform/mips/ls2k-reset.c b/drivers/platform/mips/ls2k-reset.c
new file mode 100644
index 000000000000..b70e7b8a092c
--- /dev/null
+++ b/drivers/platform/mips/ls2k-reset.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2021, Qing Zhang <zhangqing@loongson.cn>
+ *  Loongson-2K1000 reset support
+ */
+
+#include <linux/of_address.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+
+#define	PM1_STS		0x0c /* Power Management 1 Status Register */
+#define	PM1_CNT		0x14 /* Power Management 1 Control Register */
+#define	RST_CNT		0x30 /* Reset Control Register */
+
+static void __iomem *base;
+
+static void ls2k_restart(char *command)
+{
+	writel(0x1, base + RST_CNT);
+}
+
+static void ls2k_poweroff(void)
+{
+	/* Clear */
+	writel((readl(base + PM1_STS) & 0xffffffff), base + PM1_STS);
+	/* Sleep Enable | Soft Off*/
+	writel(GENMASK(12, 10) | BIT(13), base + PM1_CNT);
+}
+
+static int ls2k_reset_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "loongson,ls2k-pm");
+	if (!np) {
+		pr_info("Failed to get PM node\n");
+		return -ENODEV;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_info("Failed to map PM register base address\n");
+		return -ENOMEM;
+	}
+
+	_machine_restart = ls2k_restart;
+	pm_power_off = ls2k_poweroff;
+
+	of_node_put(np);
+	return 0;
+}
+
+arch_initcall(ls2k_reset_init);
-- 
2.31.0

[PATCH v8 2/3] MIPS: Loongson64: DTS: Add pm block node for Loongson-2K1000

[Qing Zhang]

The module is now supported, enable it.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
---

v7-v8:
No change
---
 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index 5747f171de29..6004400bb689 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -52,6 +52,11 @@ package0: bus@10000000 {
 			0 0x40000000 0 0x40000000 0 0x40000000
 			0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
 
+		pm: power-controller@1fe07000 {
+			compatible = "loongson,ls2k-pm";
+			reg = <0 0x1fe07000 0 0x422>;
+		};
+
 		liointc0: interrupt-controller@1fe11400 {
 			compatible = "loongson,liointc-2.0";
 			reg = <0 0x1fe11400 0 0x40>,
-- 
2.31.0

[PATCH v8 3/3] dt-bindings: mips: Add Loongson-2K1000 reset support

[Qing Zhang]

Switch the DT binding to a YAML schema to enable the DT validation.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
---

v7-v8:
No change
---
 .../bindings/mips/loongson/ls2k-reset.yaml    | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml

diff --git a/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
new file mode 100644
index 000000000000..6016ea756ccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson 2K1000 PM Controller
+
+maintainers:
+  - Qing Zhang <zhangqing@loongson.cn>
+
+description: |
+  This controller can be found in Loongson-2K1000 Soc systems.
+
+properties:
+  compatible:
+    const: loongson,ls2k-pm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pm: power-controller@1fe07000 {
+            compatible = "loongson,ls2k-pm";
+            reg = <0 0x1fe07000 0 0x422>;
+        };
+    };
+...
-- 
2.31.0

Re: [PATCH v8 3/3] dt-bindings: mips: Add Loongson-2K1000 reset support

[Rob Herring]

On Thu, 01 Jul 2021 21:14:00 +0800, Qing Zhang wrote:
> Switch the DT binding to a YAML schema to enable the DT validation.
> 
> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
> ---
> 
> v7-v8:
> No change
> ---
>  .../bindings/mips/loongson/ls2k-reset.yaml    | 38 +++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.example.dt.yaml: power-controller@1fe07000: '#power-domain-cells' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/power-domain.yaml
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1499533

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.