From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Viresh Kumar <vireshk@kernel.org>,
Stephen Boyd <sboyd@kernel.org>,
Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: [PATCH v7 07/37] dt-bindings: host1x: Document OPP and power domain properties
Date: Fri, 2 Jul 2021 02:26:58 +0300 [thread overview]
Message-ID: <20210701232728.23591-8-digetx@gmail.com> (raw)
In-Reply-To: <20210701232728.23591-1-digetx@gmail.com>
Document new DVFS OPP table and power domain properties of the Host1x bus
and devices sitting on the bus.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
.../display/tegra/nvidia,tegra20-host1x.txt | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 8a6d3e1ee306..62861a8fb5c6 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -20,6 +20,18 @@ Required properties:
- reset-names: Must include the following entries:
- host1x
+Optional properties:
+- operating-points-v2: See ../bindings/opp/opp.txt for details.
+ - power-domains: Phandle to HEG or core power domain.
+
+For each opp entry in 'operating-points-v2' table of host1x and its modules:
+- opp-supported-hw: One bitfield indicating:
+ On Tegra20: SoC process ID mask
+ On Tegra30+: SoC speedo ID mask
+
+ A bitwise AND is performed against the value and if any bit
+ matches, the OPP gets enabled.
+
Each host1x client module having to perform DMA through the Memory Controller
should have the interconnect endpoints set to the Memory Client and External
Memory respectively.
@@ -45,6 +57,8 @@ of the following host1x client modules:
- interconnect-names: Must include name of the interconnect path for each
interconnect entry. Consult TRM documentation for information about
available memory clients, see MEMORY CONTROLLER section.
+ - operating-points-v2: See ../bindings/opp/opp.txt for details.
+ - power-domains: Phandle to MPE power domain.
- vi: video input
@@ -128,6 +142,8 @@ of the following host1x client modules:
- interconnect-names: Must include name of the interconnect path for each
interconnect entry. Consult TRM documentation for information about
available memory clients, see MEMORY CONTROLLER section.
+ - operating-points-v2: See ../bindings/opp/opp.txt for details.
+ - power-domains: Phandle to VENC power domain.
- epp: encoder pre-processor
@@ -147,6 +163,8 @@ of the following host1x client modules:
- interconnect-names: Must include name of the interconnect path for each
interconnect entry. Consult TRM documentation for information about
available memory clients, see MEMORY CONTROLLER section.
+ - operating-points-v2: See ../bindings/opp/opp.txt for details.
+ - power-domains: Phandle to HEG or core power domain.
- isp: image signal processor
@@ -166,6 +184,7 @@ of the following host1x client modules:
- interconnect-names: Must include name of the interconnect path for each
interconnect entry. Consult TRM documentation for information about
available memory clients, see MEMORY CONTROLLER section.
+ - power-domains: Phandle to VENC or core power domain.
- gr2d: 2D graphics engine
@@ -185,6 +204,8 @@ of the following host1x client modules:
- interconnect-names: Must include name of the interconnect path for each
interconnect entry. Consult TRM documentation for information about
available memory clients, see MEMORY CONTROLLER section.
+ - operating-points-v2: See ../bindings/opp/opp.txt for details.
+ - power-domains: Phandle to HEG or core power domain.
- gr3d: 3D graphics engine
@@ -209,6 +230,8 @@ of the following host1x client modules:
- interconnect-names: Must include name of the interconnect path for each
interconnect entry. Consult TRM documentation for information about
available memory clients, see MEMORY CONTROLLER section.
+ - operating-points-v2: See ../bindings/opp/opp.txt for details.
+ - power-domains: Phandles to 3D or core power domain.
- dc: display controller
@@ -241,6 +264,8 @@ of the following host1x client modules:
- interconnect-names: Must include name of the interconnect path for each
interconnect entry. Consult TRM documentation for information about
available memory clients, see MEMORY CONTROLLER section.
+ - operating-points-v2: See ../bindings/opp/opp.txt for details.
+ - power-domains: Phandle to core power domain.
- hdmi: High Definition Multimedia Interface
@@ -267,6 +292,7 @@ of the following host1x client modules:
- nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
- nvidia,edid: supplies a binary EDID blob
- nvidia,panel: phandle of a display panel
+ - operating-points-v2: See ../bindings/opp/opp.txt for details.
- tvo: TV encoder output
@@ -277,6 +303,10 @@ of the following host1x client modules:
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
+ Optional properties:
+ - operating-points-v2: See ../bindings/opp/opp.txt for details.
+ - power-domains: Phandle to core power domain.
+
- dsi: display serial interface
Required properties:
@@ -305,6 +335,7 @@ of the following host1x client modules:
- nvidia,panel: phandle of a display panel
- nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
up with in order to support up to 8 data lanes
+ - operating-points-v2: See ../bindings/opp/opp.txt for details.
- sor: serial output resource
@@ -408,6 +439,8 @@ Example:
clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
+ operating-points-v2 = <&dvfs_opp_table>;
+ power-domains = <&domain>;
#address-cells = <1>;
#size-cells = <1>;
@@ -421,6 +454,8 @@ Example:
clocks = <&tegra_car TEGRA20_CLK_MPE>;
resets = <&tegra_car 60>;
reset-names = "mpe";
+ operating-points-v2 = <&dvfs_opp_table>;
+ power-domains = <&domain>;
};
vi@54080000 {
@@ -429,6 +464,7 @@ Example:
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ operating-points-v2 = <&dvfs_opp_table>;
clocks = <&tegra_car TEGRA210_CLK_VI>;
power-domains = <&pd_venc>;
@@ -510,6 +546,8 @@ Example:
clocks = <&tegra_car TEGRA20_CLK_EPP>;
resets = <&tegra_car 19>;
reset-names = "epp";
+ operating-points-v2 = <&dvfs_opp_table>;
+ power-domains = <&domain>;
};
isp {
@@ -528,6 +566,8 @@ Example:
clocks = <&tegra_car TEGRA20_CLK_GR2D>;
resets = <&tegra_car 21>;
reset-names = "2d";
+ operating-points-v2 = <&dvfs_opp_table>;
+ power-domains = <&domain>;
};
gr3d {
@@ -536,6 +576,8 @@ Example:
clocks = <&tegra_car TEGRA20_CLK_GR3D>;
resets = <&tegra_car 24>;
reset-names = "3d";
+ operating-points-v2 = <&dvfs_opp_table>;
+ power-domains = <&domain>;
};
dc@54200000 {
@@ -547,6 +589,8 @@ Example:
clock-names = "dc", "parent";
resets = <&tegra_car 27>;
reset-names = "dc";
+ operating-points-v2 = <&dvfs_opp_table>;
+ power-domains = <&domain>;
interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
<&mc TEGRA20_MC_DISPLAY0B &emc>,
@@ -571,6 +615,8 @@ Example:
clock-names = "dc", "parent";
resets = <&tegra_car 26>;
reset-names = "dc";
+ operating-points-v2 = <&dvfs_opp_table>;
+ power-domains = <&domain>;
interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
<&mc TEGRA20_MC_DISPLAY0BB &emc>,
@@ -596,6 +642,7 @@ Example:
resets = <&tegra_car 51>;
reset-names = "hdmi";
status = "disabled";
+ operating-points-v2 = <&dvfs_opp_table>;
};
tvo {
@@ -604,6 +651,7 @@ Example:
interrupts = <0 76 0x04>;
clocks = <&tegra_car TEGRA20_CLK_TVO>;
status = "disabled";
+ operating-points-v2 = <&dvfs_opp_table>;
};
dsi {
@@ -615,6 +663,7 @@ Example:
resets = <&tegra_car 48>;
reset-names = "dsi";
status = "disabled";
+ operating-points-v2 = <&dvfs_opp_table>;
};
};
--
2.30.2
next prev parent reply other threads:[~2021-07-01 23:28 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 23:26 [PATCH v7 00/37] NVIDIA Tegra power management patches for 5.15 Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 01/37] soc/tegra: pmc: Temporarily disable PMC state syncing Dmitry Osipenko
2021-08-12 16:02 ` Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 02/37] soc/tegra: pmc: Implement attach_dev() of power domain drivers Dmitry Osipenko
2021-08-02 14:48 ` Ulf Hansson
2021-08-02 18:23 ` Dmitry Osipenko
2021-08-04 9:59 ` Ulf Hansson
2021-08-04 21:16 ` Dmitry Osipenko
2021-08-09 14:15 ` Ulf Hansson
2021-08-09 23:56 ` Dmitry Osipenko
2021-08-10 10:51 ` Ulf Hansson
2021-08-11 19:30 ` Dmitry Osipenko
2021-08-11 22:41 ` Dmitry Osipenko
2021-08-12 1:40 ` Dmitry Osipenko
2021-08-12 11:17 ` Ulf Hansson
2021-08-12 16:24 ` Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 03/37] soc/tegra: Don't print error message when OPPs not available Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 04/37] soc/tegra: Add devm_tegra_core_dev_init_opp_table_simple() Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 05/37] dt-bindings: clock: tegra-car: Document new tegra-clocks node Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 06/37] clk: tegra: Support runtime PM and power domain Dmitry Osipenko
2021-07-01 23:26 ` Dmitry Osipenko [this message]
2021-07-01 23:26 ` [PATCH v7 08/37] dt-bindings: host1x: Document Memory Client resets of Host1x, GR2D and GR3D Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 09/37] gpu: host1x: Add host1x_channel_stop() Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 10/37] gpu: host1x: Add runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 11/37] gpu: host1x: Add stub driver for MPE, VI, EPP and ISP Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 12/37] drm/tegra: dc: Support OPP and SoC core voltage scaling Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 13/37] drm/tegra: hdmi: Add OPP support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 14/37] drm/tegra: gr2d: Support OPP and power management Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 15/37] drm/tegra: gr3d: " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 16/37] drm/tegra: vic: Stop channel before suspending Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 17/37] usb: chipidea: tegra: Add runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 18/37] bus: tegra-gmi: " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 19/37] pwm: tegra: Add runtime PM and OPP support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 20/37] mmc: sdhci-tegra: " Dmitry Osipenko
2021-07-02 3:39 ` kernel test robot
2021-07-01 23:27 ` [PATCH v7 21/37] mtd: rawnand: tegra: Add runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 22/37] soc/tegra: fuse: Clear fuse->clk on driver probe failure Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 23/37] soc/tegra: fuse: Add runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 24/37] soc/tegra: fuse: Enable fuse clock on suspend Dmitry Osipenko
2021-07-21 16:00 ` Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 25/37] clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 26/37] spi: tegra20-slink: Improve runtime PM usage Dmitry Osipenko
2021-07-02 8:29 ` kernel test robot
2021-07-01 23:27 ` [PATCH v7 27/37] spi: tegra20-slink: Add OPP support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 28/37] memory: tegra20-emc: Add minimal runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 29/37] memory: tegra30-emc: " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 30/37] media: dt: bindings: tegra-vde: Convert to schema Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 31/37] media: dt: bindings: tegra-vde: Document OPP and power domain Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 32/37] media: staging: tegra-vde: Support generic " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 33/37] ARM: tegra: Add OPP tables and power domains to Tegra20 device-trees Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 34/37] ARM: tegra: Add OPP tables and power domains to Tegra30 device-trees Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 35/37] ARM: tegra: Add Memory Client resets to Tegra20 GR2D, GR3D and Host1x Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 36/37] ARM: tegra: Add Memory Client resets to Tegra30 " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 37/37] soc/tegra: pmc: Enable core domain support on Tegra20 and Tegra30 Dmitry Osipenko
2021-07-09 13:01 ` [PATCH v7 00/37] NVIDIA Tegra power management patches for 5.15 Ulf Hansson
2021-07-09 21:23 ` Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210701232728.23591-8-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pdeschrijver@nvidia.com \
--cc=sboyd@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=ulf.hansson@linaro.org \
--cc=vireshk@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).