[PATCH AUTOSEL 4.9 01/20] spi: spi-loopback-test: Fix 'tx_buf' might be 'rx_buf'

[PATCH AUTOSEL 4.9 01/20] spi: spi-loopback-test: Fix 'tx_buf' might be 'rx_buf'

[Sasha Levin]

From: Jay Fang <f.fangjian@huawei.com>

[ Upstream commit 9e37a3ab0627011fb63875e9a93094b6fc8ddf48 ]

In function 'spi_test_run_iter': Value 'tx_buf' might be 'rx_buf'.

Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620629903-15493-5-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-loopback-test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
index 7120083fe761..cac38753d0cd 100644
--- a/drivers/spi/spi-loopback-test.c
+++ b/drivers/spi/spi-loopback-test.c
@@ -803,7 +803,7 @@ static int spi_test_run_iter(struct spi_device *spi,
 			test.transfers[i].len = len;
 		if (test.transfers[i].tx_buf)
 			test.transfers[i].tx_buf += tx_off;
-		if (test.transfers[i].tx_buf)
+		if (test.transfers[i].rx_buf)
 			test.transfers[i].rx_buf += rx_off;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 4.9 02/20] spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages()

[Sasha Levin]

From: Jay Fang <f.fangjian@huawei.com>

[ Upstream commit 026a1dc1af52742c5897e64a3431445371a71871 ]

pch_spi_set_tx() frees data->pkt_tx_buff on failure of kzalloc() for
data->pkt_rx_buff, but its caller, pch_spi_process_messages(), will
free data->pkt_tx_buff again. Set data->pkt_tx_buff to NULL after
kfree() to avoid double free.

Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620284888-65215-1-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-topcliff-pch.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index fe707440f8c3..9b24ebbba346 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -585,8 +585,10 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw)
 	data->pkt_tx_buff = kzalloc(size, GFP_KERNEL);
 	if (data->pkt_tx_buff != NULL) {
 		data->pkt_rx_buff = kzalloc(size, GFP_KERNEL);
-		if (!data->pkt_rx_buff)
+		if (!data->pkt_rx_buff) {
 			kfree(data->pkt_tx_buff);
+			data->pkt_tx_buff = NULL;
+		}
 	}
 
 	if (!data->pkt_rx_buff) {
-- 
2.30.2

[PATCH AUTOSEL 4.9 03/20] spi: omap-100k: Fix the length judgment problem

[Sasha Levin]

From: Tian Tao <tiantao6@hisilicon.com>

[ Upstream commit e7a1a3abea373e41ba7dfe0fbc93cb79b6a3a529 ]

word_len should be checked in the omap1_spi100k_setup_transfer
function to see if it exceeds 32.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1619695248-39045-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap-100k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c
index 1eccdc4a4581..2eeb0fe2eed2 100644
--- a/drivers/spi/spi-omap-100k.c
+++ b/drivers/spi/spi-omap-100k.c
@@ -251,7 +251,7 @@ static int omap1_spi100k_setup_transfer(struct spi_device *spi,
 	else
 		word_len = spi->bits_per_word;
 
-	if (spi->bits_per_word > 32)
+	if (word_len > 32)
 		return -EINVAL;
 	cs->word_len = word_len;
 
-- 
2.30.2

[PATCH AUTOSEL 4.9 04/20] crypto: nx - add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 06676aa1f455c74e3ad1624cea3acb9ed2ef71ae ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/nx/nx-842-pseries.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index cddc6d8b55d9..2e5b4004f0ee 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -1086,6 +1086,7 @@ static struct vio_device_id nx842_vio_driver_ids[] = {
 	{"ibm,compression-v1", "ibm,compression"},
 	{"", ""},
 };
+MODULE_DEVICE_TABLE(vio, nx842_vio_driver_ids);
 
 static struct vio_driver nx842_vio_driver = {
 	.name = KBUILD_MODNAME,
-- 
2.30.2

[PATCH AUTOSEL 4.9 05/20] media: cpia2: fix memory leak in cpia2_usb_probe

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit be8656e62e9e791837b606a027802b504a945c97 ]

syzbot reported leak in cpia2 usb driver. The problem was
in invalid error handling.

v4l2_device_register() is called in cpia2_init_camera_struct(), but
all error cases after cpia2_init_camera_struct() did not call the
v4l2_device_unregister()

Reported-by: syzbot+d1e69c888f0d3866ead4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/cpia2/cpia2.h      |  1 +
 drivers/media/usb/cpia2/cpia2_core.c | 12 ++++++++++++
 drivers/media/usb/cpia2/cpia2_usb.c  | 13 +++++++------
 3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/cpia2/cpia2.h b/drivers/media/usb/cpia2/cpia2.h
index cdef677d57ec..80a7af6482ae 100644
--- a/drivers/media/usb/cpia2/cpia2.h
+++ b/drivers/media/usb/cpia2/cpia2.h
@@ -442,6 +442,7 @@ int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd);
 int cpia2_do_command(struct camera_data *cam,
 		     unsigned int command,
 		     unsigned char direction, unsigned char param);
+void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf);
 struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf);
 int cpia2_init_camera(struct camera_data *cam);
 int cpia2_allocate_buffers(struct camera_data *cam);
diff --git a/drivers/media/usb/cpia2/cpia2_core.c b/drivers/media/usb/cpia2/cpia2_core.c
index 0310fd6ed103..828f9689f4a1 100644
--- a/drivers/media/usb/cpia2/cpia2_core.c
+++ b/drivers/media/usb/cpia2/cpia2_core.c
@@ -2158,6 +2158,18 @@ static void reset_camera_struct(struct camera_data *cam)
 	cam->height = cam->params.roi.height;
 }
 
+/******************************************************************************
+ *
+ *  cpia2_init_camera_struct
+ *
+ *  Deinitialize camera struct
+ *****************************************************************************/
+void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf)
+{
+	v4l2_device_unregister(&cam->v4l2_dev);
+	kfree(cam);
+}
+
 /******************************************************************************
  *
  *  cpia2_init_camera_struct
diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index 30e27844e0e9..4f4a130f17af 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -860,15 +860,13 @@ static int cpia2_usb_probe(struct usb_interface *intf,
 	ret = set_alternate(cam, USBIF_CMDONLY);
 	if (ret < 0) {
 		ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 
 
 	if((ret = cpia2_init_camera(cam)) < 0) {
 		ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 	LOG("  CPiA Version: %d.%02d (%d.%d)\n",
 	       cam->params.version.firmware_revision_hi,
@@ -888,11 +886,14 @@ static int cpia2_usb_probe(struct usb_interface *intf,
 	ret = cpia2_register_camera(cam);
 	if (ret < 0) {
 		ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 
 	return 0;
+
+alt_err:
+	cpia2_deinit_camera_struct(cam, intf);
+	return ret;
 }
 
 /******************************************************************************
-- 
2.30.2

[PATCH AUTOSEL 4.9 06/20] media: cobalt: fix race condition in setting HPD

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 3d37ef41bed0854805ab9af22c422267510e1344 ]

The cobalt_s_bit_sysctrl reads the old register value over PCI,
then changes a bit and sets writes the new value to the register.

This is used among other things for setting the HPD output pin.

But if the HPD is changed for multiple inputs at the same time,
then this causes a race condition where a stale value is read.

Serialize this function with a mutex.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cobalt/cobalt-driver.c | 1 +
 drivers/media/pci/cobalt/cobalt-driver.h | 7 ++++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/cobalt/cobalt-driver.c b/drivers/media/pci/cobalt/cobalt-driver.c
index 979634000597..17b717a1c7fa 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.c
+++ b/drivers/media/pci/cobalt/cobalt-driver.c
@@ -689,6 +689,7 @@ static int cobalt_probe(struct pci_dev *pci_dev,
 		return -ENOMEM;
 	cobalt->pci_dev = pci_dev;
 	cobalt->instance = i;
+	mutex_init(&cobalt->pci_lock);
 
 	retval = v4l2_device_register(&pci_dev->dev, &cobalt->v4l2_dev);
 	if (retval) {
diff --git a/drivers/media/pci/cobalt/cobalt-driver.h b/drivers/media/pci/cobalt/cobalt-driver.h
index ed00dc9d9399..8f9454d30b95 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.h
+++ b/drivers/media/pci/cobalt/cobalt-driver.h
@@ -262,6 +262,8 @@ struct cobalt {
 	int instance;
 	struct pci_dev *pci_dev;
 	struct v4l2_device v4l2_dev;
+	/* serialize PCI access in cobalt_s_bit_sysctrl() */
+	struct mutex pci_lock;
 
 	void __iomem *bar0, *bar1;
 
@@ -333,10 +335,13 @@ static inline u32 cobalt_g_sysctrl(struct cobalt *cobalt)
 static inline void cobalt_s_bit_sysctrl(struct cobalt *cobalt,
 					int bit, int val)
 {
-	u32 ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE);
+	u32 ctrl;
 
+	mutex_lock(&cobalt->pci_lock);
+	ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE);
 	cobalt_write_bar1(cobalt, COBALT_SYS_CTRL_BASE,
 			(ctrl & ~(1UL << bit)) | (val << bit));
+	mutex_unlock(&cobalt->pci_lock);
 }
 
 static inline u32 cobalt_g_sysstat(struct cobalt *cobalt)
-- 
2.30.2

[PATCH AUTOSEL 4.9 07/20] media: pvrusb2: fix warning in pvr2_i2c_core_done

[Sasha Levin]

From: Anirudh Rayabharam <mail@anirudhrb.com>

[ Upstream commit f8194e5e63fdcb349e8da9eef9e574d5b1d687cb ]

syzbot has reported the following warning in pvr2_i2c_done:

	sysfs group 'power' not found for kobject '1-0043'

When the device is disconnected (pvr_hdw_disconnect), the i2c adapter is
not unregistered along with the USB and v4l2 teardown. As part of the USB
device disconnect, the sysfs files of the subdevices are also deleted.
So, by the time pvr_i2c_core_done is called by pvr_context_destroy, the
sysfs files have been deleted.

To fix this, unregister the i2c adapter too in pvr_hdw_disconnect. Make
the device deregistration code shared by calling pvr_hdw_disconnect from
pvr2_hdw_destroy.

Reported-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Tested-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index ff489645e070..0cb8dd585235 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -2722,9 +2722,8 @@ void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
 		pvr2_stream_destroy(hdw->vid_stream);
 		hdw->vid_stream = NULL;
 	}
-	pvr2_i2c_core_done(hdw);
 	v4l2_device_unregister(&hdw->v4l2_dev);
-	pvr2_hdw_remove_usb_stuff(hdw);
+	pvr2_hdw_disconnect(hdw);
 	mutex_lock(&pvr2_unit_mtx);
 	do {
 		if ((hdw->unit_number >= 0) &&
@@ -2751,6 +2750,7 @@ void pvr2_hdw_disconnect(struct pvr2_hdw *hdw)
 {
 	pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw);
 	LOCK_TAKE(hdw->big_lock);
+	pvr2_i2c_core_done(hdw);
 	LOCK_TAKE(hdw->ctl_lock);
 	pvr2_hdw_remove_usb_stuff(hdw);
 	LOCK_GIVE(hdw->ctl_lock);
-- 
2.30.2

[PATCH AUTOSEL 4.9 08/20] crypto: qat - check return code of qat_hal_rd_rel_reg()

[Sasha Levin]

From: Jack Xu <jack.xu@intel.com>

[ Upstream commit 96b57229209490c8bca4335b01a426a96173dc56 ]

Check the return code of the function qat_hal_rd_rel_reg() and return it
to the caller.

This is to fix the following warning when compiling the driver with
clang scan-build:

    drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qat/qat_common/qat_hal.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/qat/qat_common/qat_hal.c b/drivers/crypto/qat/qat_common/qat_hal.c
index 8c4fd255a601..cdf80c16a033 100644
--- a/drivers/crypto/qat/qat_common/qat_hal.c
+++ b/drivers/crypto/qat/qat_common/qat_hal.c
@@ -1255,7 +1255,11 @@ static int qat_hal_put_rel_wr_xfer(struct icp_qat_fw_loader_handle *handle,
 		pr_err("QAT: bad xfrAddr=0x%x\n", xfr_addr);
 		return -EINVAL;
 	}
-	qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval);
+	status = qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval);
+	if (status) {
+		pr_err("QAT: failed to read register");
+		return status;
+	}
 	gpr_addr = qat_hal_get_reg_addr(ICP_GPB_REL, gprnum);
 	data16low = 0xffff & data;
 	data16hi = 0xffff & (data >> 0x10);
-- 
2.30.2

[PATCH AUTOSEL 4.9 09/20] crypto: qat - remove unused macro in FW loader

[Sasha Levin]

From: Jack Xu <jack.xu@intel.com>

[ Upstream commit 9afe77cf25d9670e61b489fd52cc6f75fd7f6803 ]

Remove the unused macro ICP_DH895XCC_PESRAM_BAR_SIZE in the firmware
loader.

This is to fix the following warning when compiling the driver using the
clang compiler with CC=clang W=2:

    drivers/crypto/qat/qat_common/qat_uclo.c:345:9: warning: macro is not used [-Wunused-macros]

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qat/qat_common/qat_uclo.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/crypto/qat/qat_common/qat_uclo.c b/drivers/crypto/qat/qat_common/qat_uclo.c
index 4f1cd83bf56f..a8e3191e5185 100644
--- a/drivers/crypto/qat/qat_common/qat_uclo.c
+++ b/drivers/crypto/qat/qat_common/qat_uclo.c
@@ -385,7 +385,6 @@ static int qat_uclo_init_umem_seg(struct icp_qat_fw_loader_handle *handle,
 	return 0;
 }
 
-#define ICP_DH895XCC_PESRAM_BAR_SIZE 0x80000
 static int qat_uclo_init_ae_memory(struct icp_qat_fw_loader_handle *handle,
 				   struct icp_qat_uof_initmem *init_mem)
 {
-- 
2.30.2

[PATCH AUTOSEL 4.9 10/20] media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release

[Sasha Levin]

From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>

[ Upstream commit 7dd0c9e547b6924e18712b6b51aa3cba1896ee2c ]

A use after free bug caused by the dangling pointer
filp->privitate_data in v4l2_fh_release.
See https://lore.kernel.org/patchwork/patch/1419058/.

My patch sets the dangling pointer to NULL to provide
robust.

Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-fh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/v4l2-core/v4l2-fh.c b/drivers/media/v4l2-core/v4l2-fh.c
index 0c5e69070586..d44b289205b4 100644
--- a/drivers/media/v4l2-core/v4l2-fh.c
+++ b/drivers/media/v4l2-core/v4l2-fh.c
@@ -109,6 +109,7 @@ int v4l2_fh_release(struct file *filp)
 		v4l2_fh_del(fh);
 		v4l2_fh_exit(fh);
 		kfree(fh);
+		filp->private_data = NULL;
 	}
 	return 0;
 }
-- 
2.30.2

[PATCH AUTOSEL 4.9 11/20] media: bt8xx: Fix a missing check bug in bt878_probe

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 1a4520090681853e6b850cbe54b27247a013e0e5 ]

In 'bt878_irq', the driver calls 'tasklet_schedule', but this tasklet is
set in 'dvb_bt8xx_load_card' of another driver 'dvb-bt8xx'.
However, this two drivers are separate. The user may not load the
'dvb-bt8xx' driver when loading the 'bt8xx' driver, that is, the tasklet
has not been initialized when 'tasklet_schedule' is called, so it is
necessary to check whether the tasklet is initialized in 'bt878_probe'.

Fix this by adding a check at the end of bt878_probe.

The KASAN's report reveals it:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 800000006aab2067 P4D 800000006aab2067 PUD 6b2ea067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 8724 Comm: syz-executor.0 Not tainted 4.19.177-
gdba4159c14ef-dirty #40
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:          (null)
Code: Bad RIP value.
RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246
RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000
RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774
R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000
R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90
FS:  00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tasklet_action_common.isra.17+0x141/0x420 kernel/softirq.c:522
 tasklet_action+0x50/0x70 kernel/softirq.c:540
 __do_softirq+0x224/0x92c kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:372 [inline]
 irq_exit+0x15a/0x180 kernel/softirq.c:412
 exiting_irq arch/x86/include/asm/apic.h:535 [inline]
 do_IRQ+0x123/0x1e0 arch/x86/kernel/irq.c:260
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
 </IRQ>
RIP: 0010:__do_sys_interrupt kernel/sys.c:2593 [inline]
RIP: 0010:__se_sys_interrupt kernel/sys.c:2584 [inline]
RIP: 0010:__x64_sys_interrupt+0x5b/0x80 kernel/sys.c:2584
Code: ba 00 04 00 00 48 c7 c7 c0 99 31 8c e8 ae 76 5e 01 48 85 c0 75 21 e8
14 ae 24 00 48 c7 c3 c0 99 31 8c b8 0c 00 00 00 0f 01 c1 <31> db e8 fe ad
24 00 48 89 d8 5b 5d c3 48 c7 c3 ea ff ff ff eb ec
RSP: 0018:ffff888054167f10 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde
RAX: 000000000000000c RBX: ffffffff8c3199c0 RCX: ffffc90001ca6000
RDX: 000000000000001a RSI: ffffffff813478fc RDI: ffffffff8c319dc0
RBP: ffff888054167f18 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000080 R11: fffffbfff18633b7 R12: ffff888054167f58
R13: ffff88805f638000 R14: 0000000000000000 R15: 0000000000000000
 do_syscall_64+0xb0/0x4e0 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4692a9
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6b550e5c48 EFLAGS: 00000246 ORIG_RAX: 000000000000014f
RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 00000000004692a9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140
RBP: 00000000004cf7eb R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf60
R13: 0000000000000000 R14: 000000000077bf60 R15: 00007fff55a1dca0
Modules linked in:
Dumping ftrace buffer:
   (ftrace buffer empty)
CR2: 0000000000000000
---[ end trace 68e5849c3f77cbb6 ]---
RIP: 0010:          (null)
Code: Bad RIP value.
RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246
RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000
RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774
R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000
R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90
FS:  00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/bt8xx/bt878.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
index 90fcccc05b56..c678d7120727 100644
--- a/drivers/media/pci/bt8xx/bt878.c
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -494,6 +494,9 @@ static int bt878_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	btwrite(0, BT878_AINT_MASK);
 	bt878_num++;
 
+	if (!bt->tasklet.func)
+		tasklet_disable(&bt->tasklet);
+
 	return 0;
 
       fail2:
-- 
2.30.2

[PATCH AUTOSEL 4.9 12/20] media: st-hva: Fix potential NULL pointer dereferences

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit b7fdd208687ba59ebfb09b2199596471c63b69e3 ]

When ctx_id >= HVA_MAX_INSTANCES in hva_hw_its_irq_thread() it tries to
access fields of ctx that is NULL at that point. The patch gets rid of
these accesses.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/hva/hva-hw.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c
index c4d97fb80aae..1653892da9a5 100644
--- a/drivers/media/platform/sti/hva/hva-hw.c
+++ b/drivers/media/platform/sti/hva/hva-hw.c
@@ -127,8 +127,7 @@ static irqreturn_t hva_hw_its_irq_thread(int irq, void *arg)
 	ctx_id = (hva->sts_reg & 0xFF00) >> 8;
 	if (ctx_id >= HVA_MAX_INSTANCES) {
 		dev_err(dev, "%s     %s: bad context identifier: %d\n",
-			ctx->name, __func__, ctx_id);
-		ctx->hw_err = true;
+			HVA_PREFIX, __func__, ctx_id);
 		goto out;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 4.9 13/20] mmc: via-sdmmc: add a check against NULL pointer dereference

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 45c8ddd06c4b729c56a6083ab311bfbd9643f4a6 ]

Before referencing 'host->data', the driver needs to check whether it is
null pointer, otherwise it will cause a null pointer reference.

This log reveals it:

[   29.355199] BUG: kernel NULL pointer dereference, address:
0000000000000014
[   29.357323] #PF: supervisor write access in kernel mode
[   29.357706] #PF: error_code(0x0002) - not-present page
[   29.358088] PGD 0 P4D 0
[   29.358280] Oops: 0002 [#1] PREEMPT SMP PTI
[   29.358595] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-
g70e7f0549188-dirty #102
[   29.359164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[   29.359978] RIP: 0010:via_sdc_isr+0x21f/0x410
[   29.360314] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00
10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43
18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77
[   29.361661] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046
[   29.362042] RAX: 0000000000000000 RBX: ffff888107d77880
RCX: 0000000000000000
[   29.362564] RDX: 0000000000000000 RSI: ffffffff835d20bb
RDI: 00000000ffffffff
[   29.363085] RBP: ffffc90000118ed8 R08: 0000000000000001
R09: 0000000000000001
[   29.363604] R10: 0000000000000000 R11: 0000000000000001
R12: 0000000000008600
[   29.364128] R13: ffff888107d779c8 R14: ffffc90009c00200
R15: 0000000000008000
[   29.364651] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000)
knlGS:0000000000000000
[   29.365235] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.365655] CR2: 0000000000000014 CR3: 0000000005a2e000
CR4: 00000000000006e0
[   29.366170] DR0: 0000000000000000 DR1: 0000000000000000
DR2: 0000000000000000
[   29.366683] DR3: 0000000000000000 DR6: 00000000fffe0ff0
DR7: 0000000000000400
[   29.367197] Call Trace:
[   29.367381]  <IRQ>
[   29.367537]  __handle_irq_event_percpu+0x53/0x3e0
[   29.367916]  handle_irq_event_percpu+0x35/0x90
[   29.368247]  handle_irq_event+0x39/0x60
[   29.368632]  handle_fasteoi_irq+0xc2/0x1d0
[   29.368950]  __common_interrupt+0x7f/0x150
[   29.369254]  common_interrupt+0xb4/0xd0
[   29.369547]  </IRQ>
[   29.369708]  asm_common_interrupt+0x1e/0x40
[   29.370016] RIP: 0010:native_safe_halt+0x17/0x20
[   29.370360] Code: 07 0f 00 2d db 80 43 00 f4 5d c3 0f 1f 84 00 00 00
00 00 8b 05 c2 37 e5 01 55 48 89 e5 85 c0 7e 07 0f 00 2d bb 80 43 00 fb
f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d f9 91
[   29.371696] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[   29.372079] RAX: 0000000000000000 RBX: 0000000000000002
RCX: 0000000000000000
[   29.372595] RDX: 0000000000000000 RSI: ffffffff854f67a4
RDI: ffffffff85403406
[   29.373122] RBP: ffffc9000008fe90 R08: 0000000000000001
R09: 0000000000000001
[   29.373646] R10: 0000000000000000 R11: 0000000000000001
R12: ffffffff86009188
[   29.374160] R13: 0000000000000000 R14: 0000000000000000
R15: ffff888100258000
[   29.374690]  default_idle+0x9/0x10
[   29.374944]  arch_cpu_idle+0xa/0x10
[   29.375198]  default_idle_call+0x6e/0x250
[   29.375491]  do_idle+0x1f0/0x2d0
[   29.375740]  cpu_startup_entry+0x18/0x20
[   29.376034]  start_secondary+0x11f/0x160
[   29.376328]  secondary_startup_64_no_verify+0xb0/0xbb
[   29.376705] Modules linked in:
[   29.376939] Dumping ftrace buffer:
[   29.377187]    (ftrace buffer empty)
[   29.377460] CR2: 0000000000000014
[   29.377712] ---[ end trace 51a473dffb618c47 ]---
[   29.378056] RIP: 0010:via_sdc_isr+0x21f/0x410
[   29.378380] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00
10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43
18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77
[   29.379714] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046
[   29.380098] RAX: 0000000000000000 RBX: ffff888107d77880
RCX: 0000000000000000
[   29.380614] RDX: 0000000000000000 RSI: ffffffff835d20bb
RDI: 00000000ffffffff
[   29.381134] RBP: ffffc90000118ed8 R08: 0000000000000001
R09: 0000000000000001
[   29.381653] R10: 0000000000000000 R11: 0000000000000001
R12: 0000000000008600
[   29.382176] R13: ffff888107d779c8 R14: ffffc90009c00200
R15: 0000000000008000
[   29.382697] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000)
knlGS:0000000000000000
[   29.383277] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.383697] CR2: 0000000000000014 CR3: 0000000005a2e000
CR4: 00000000000006e0
[   29.384223] DR0: 0000000000000000 DR1: 0000000000000000
DR2: 0000000000000000
[   29.384736] DR3: 0000000000000000 DR6: 00000000fffe0ff0
DR7: 0000000000000400
[   29.385260] Kernel panic - not syncing: Fatal exception in interrupt
[   29.385882] Dumping ftrace buffer:
[   29.386135]    (ftrace buffer empty)
[   29.386401] Kernel Offset: disabled
[   29.386656] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1622727200-15808-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/via-sdmmc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index b455e9cf95af..a3472127bea3 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -859,6 +859,9 @@ static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask)
 {
 	BUG_ON(intmask == 0);
 
+	if (!host->data)
+		return;
+
 	if (intmask & VIA_CRDR_SDSTS_DT)
 		host->data->error = -ETIMEDOUT;
 	else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC))
-- 
2.30.2

[PATCH AUTOSEL 4.9 14/20] crypto: shash - avoid comparing pointers to exported functions under CFI

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 22ca9f4aaf431a9413dcc115dd590123307f274f ]

crypto_shash_alg_has_setkey() is implemented by testing whether the
.setkey() member of a struct shash_alg points to the default version,
called shash_no_setkey(). As crypto_shash_alg_has_setkey() is a static
inline, this requires shash_no_setkey() to be exported to modules.

Unfortunately, when building with CFI, function pointers are routed
via CFI stubs which are private to each module (or to the kernel proper)
and so this function pointer comparison may fail spuriously.

Let's fix this by turning crypto_shash_alg_has_setkey() into an out of
line function.

Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/shash.c                 | 18 +++++++++++++++---
 include/crypto/internal/hash.h |  8 +-------
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/crypto/shash.c b/crypto/shash.c
index a1c7609578ea..7eebf3cde7b7 100644
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -24,12 +24,24 @@
 
 static const struct crypto_type crypto_shash_type;
 
-int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
-		    unsigned int keylen)
+static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+			   unsigned int keylen)
 {
 	return -ENOSYS;
 }
-EXPORT_SYMBOL_GPL(shash_no_setkey);
+
+/*
+ * Check whether an shash algorithm has a setkey function.
+ *
+ * For CFI compatibility, this must not be an inline function.  This is because
+ * when CFI is enabled, modules won't get the same address for shash_no_setkey
+ * (if it were exported, which inlining would require) as the core kernel will.
+ */
+bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
+{
+	return alg->setkey != shash_no_setkey;
+}
+EXPORT_SYMBOL_GPL(crypto_shash_alg_has_setkey);
 
 static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
 				  unsigned int keylen)
diff --git a/include/crypto/internal/hash.h b/include/crypto/internal/hash.h
index 5203560f992e..000c049a75f7 100644
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -80,13 +80,7 @@ int ahash_register_instance(struct crypto_template *tmpl,
 			    struct ahash_instance *inst);
 void ahash_free_instance(struct crypto_instance *inst);
 
-int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
-		    unsigned int keylen);
-
-static inline bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
-{
-	return alg->setkey != shash_no_setkey;
-}
+bool crypto_shash_alg_has_setkey(struct shash_alg *alg);
 
 bool crypto_hash_alg_has_setkey(struct hash_alg_common *halg);
 
-- 
2.30.2

[PATCH AUTOSEL 4.9 15/20] media: dvb_net: avoid speculation from net slot

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit abc0226df64dc137b48b911c1fe4319aec5891bb ]

The risk of especulation is actually almost-non-existing here,
as there are very few users of TCP/IP using the DVB stack,
as, this is mainly used with DVB-S/S2 cards, and only by people
that receives TCP/IP from satellite connections, which limits
a lot the number of users of such feature(*).

(*) In thesis, DVB-C cards could also benefit from it, but I'm
yet to see a hardware that supports it.

Yet, fixing it is trivial.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_net.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c
index 9914f69a4a02..f133489af9b9 100644
--- a/drivers/media/dvb-core/dvb_net.c
+++ b/drivers/media/dvb-core/dvb_net.c
@@ -57,6 +57,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/nospec.h>
 #include <linux/etherdevice.h>
 #include <linux/dvb/net.h>
 #include <linux/uio.h>
@@ -1350,14 +1351,20 @@ static int dvb_net_do_ioctl(struct file *file,
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
 		struct dvb_net_if *dvbnetif = parg;
+		int if_num = dvbnetif->if_num;
 
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num]) {
+		if (if_num >= DVB_NET_DEVICES_MAX) {
 			ret = -EINVAL;
 			goto ioctl_error;
 		}
+		if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
 
-		netdev = dvbnet->device[dvbnetif->if_num];
+		if (!dvbnet->state[if_num]) {
+			ret = -EINVAL;
+			goto ioctl_error;
+		}
+
+		netdev = dvbnet->device[if_num];
 
 		priv_data = netdev_priv(netdev);
 		dvbnetif->pid=priv_data->pid;
@@ -1410,14 +1417,20 @@ static int dvb_net_do_ioctl(struct file *file,
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
 		struct __dvb_net_if_old *dvbnetif = parg;
+		int if_num = dvbnetif->if_num;
+
+		if (if_num >= DVB_NET_DEVICES_MAX) {
+			ret = -EINVAL;
+			goto ioctl_error;
+		}
+		if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
 
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num]) {
+		if (!dvbnet->state[if_num]) {
 			ret = -EINVAL;
 			goto ioctl_error;
 		}
 
-		netdev = dvbnet->device[dvbnetif->if_num];
+		netdev = dvbnet->device[if_num];
 
 		priv_data = netdev_priv(netdev);
 		dvbnetif->pid=priv_data->pid;
-- 
2.30.2

[PATCH AUTOSEL 4.9 16/20] media: siano: fix device register error path

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 5368b1ee2939961a16e74972b69088433fc52195 ]

As reported by smatch:
	drivers/media/common/siano/smsdvb-main.c:1231 smsdvb_hotplug() warn: '&client->entry' not removed from list

If an error occur at the end of the registration logic, it won't
drop the device from the list.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/siano/smsdvb-main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/common/siano/smsdvb-main.c b/drivers/media/common/siano/smsdvb-main.c
index 9d5eb8b6aede..3a5b5f94398a 100644
--- a/drivers/media/common/siano/smsdvb-main.c
+++ b/drivers/media/common/siano/smsdvb-main.c
@@ -1187,6 +1187,10 @@ static int smsdvb_hotplug(struct smscore_device_t *coredev,
 	return 0;
 
 media_graph_error:
+	mutex_lock(&g_smsdvb_clientslock);
+	list_del(&client->entry);
+	mutex_unlock(&g_smsdvb_clientslock);
+
 	smsdvb_debugfs_release(client);
 
 client_error:
-- 
2.30.2

[PATCH AUTOSEL 4.9 17/20] btrfs: abort transaction if we fail to update the delayed inode

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 04587ad9bef6ce9d510325b4ba9852b6129eebdb ]

If we fail to update the delayed inode we need to abort the transaction,
because we could leave an inode with the improper counts or some other
such corruption behind.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/delayed-inode.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index 4d8f8a8c9c90..29e75fba5376 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1076,6 +1076,14 @@ static int __btrfs_update_delayed_inode(struct btrfs_trans_handle *trans,
 	btrfs_delayed_inode_release_metadata(root, node);
 	btrfs_release_delayed_inode(node);
 
+	/*
+	 * If we fail to update the delayed inode we need to abort the
+	 * transaction, because we could leave the inode with the improper
+	 * counts behind.
+	 */
+	if (ret && ret != -ENOENT)
+		btrfs_abort_transaction(trans, ret);
+
 	return ret;
 
 search:
-- 
2.30.2

[PATCH AUTOSEL 4.9 18/20] btrfs: make Private2 lifespan more consistent

[Sasha Levin]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit 87b4d86baae219a9a79f6b0a1434b2a42fd40d09 ]

Currently we use page Private2 bit to indicate that we have ordered
extent for the page range.

But the lifespan of it is not consistent, during regular writeback path,
there are two locations to clear the same PagePrivate2:

    T ----- Page marked Dirty
    |
    + ----- Page marked Private2, through btrfs_run_dealloc_range()
    |
    + ----- Page cleared Private2, through btrfs_writepage_cow_fixup()
    |       in __extent_writepage_io()
    |       ^^^ Private2 cleared for the first time
    |
    + ----- Page marked Writeback, through btrfs_set_range_writeback()
    |       in __extent_writepage_io().
    |
    + ----- Page cleared Private2, through
    |       btrfs_writepage_endio_finish_ordered()
    |       ^^^ Private2 cleared for the second time.
    |
    + ----- Page cleared Writeback, through
            btrfs_writepage_endio_finish_ordered()

Currently PagePrivate2 is mostly to prevent ordered extent accounting
being executed for both endio and invalidatepage.
Thus only the one who cleared page Private2 is responsible for ordered
extent accounting.

But the fact is, in btrfs_writepage_endio_finish_ordered(), page
Private2 is cleared and ordered extent accounting is executed
unconditionally.

The race prevention only happens through btrfs_invalidatepage(), where
we wait for the page writeback first, before checking the Private2 bit.

This means, Private2 is also protected by Writeback bit, and there is no
need for btrfs_writepage_cow_fixup() to clear Priavte2.

This patch will change btrfs_writepage_cow_fixup() to just check
PagePrivate2, not to clear it.
The clearing will happen in either btrfs_invalidatepage() or
btrfs_writepage_endio_finish_ordered().

This makes the Private2 bit easier to understand, just meaning the page
has unfinished ordered extent attached to it.

And this patch is a hard requirement for the incoming refactoring for
how we finished ordered IO for endio context, as the coming patch will
check Private2 to determine if we need to do the ordered extent
accounting.  Thus this patch is definitely needed or we will hang due to
unfinished ordered extent.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 4b671e5c33ce..ac9d8f2e3f01 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2149,7 +2149,7 @@ static int btrfs_writepage_start_hook(struct page *page, u64 start, u64 end)
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 
 	/* this page is properly in the ordered list */
-	if (TestClearPagePrivate2(page))
+	if (PagePrivate2(page))
 		return 0;
 
 	if (PageChecked(page))
-- 
2.30.2

[PATCH AUTOSEL 4.9 19/20] btrfs: disable build on platforms having page size 256K

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit b05fbcc36be1f8597a1febef4892053a0b2f3f60 ]

With a config having PAGE_SIZE set to 256K, BTRFS build fails
with the following message

  include/linux/compiler_types.h:326:38: error: call to
  '__compiletime_assert_791' declared with attribute error:
  BUILD_BUG_ON failed: (BTRFS_MAX_COMPRESSED % PAGE_SIZE) != 0

BTRFS_MAX_COMPRESSED being 128K, BTRFS cannot support platforms with
256K pages at the time being.

There are two platforms that can select 256K pages:
 - hexagon
 - powerpc

Disable BTRFS when 256K page size is selected. Supporting this would
require changes to the subpage mode that's currently being developed.
Given that 256K is many times larger than page sizes commonly used and
for what the algorithms and structures have been tuned, it's out of
scope and disabling build is a reasonable option.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig
index 80e9c18ea64f..fd6b67c40d9d 100644
--- a/fs/btrfs/Kconfig
+++ b/fs/btrfs/Kconfig
@@ -9,6 +9,8 @@ config BTRFS_FS
 	select RAID6_PQ
 	select XOR_BLOCKS
 	select SRCU
+	depends on !PPC_256K_PAGES	# powerpc
+	depends on !PAGE_SIZE_256KB	# hexagon
 
 	help
 	  Btrfs is a general purpose copy-on-write filesystem with extents,
-- 
2.30.2

[PATCH AUTOSEL 4.9 20/20] regulator: da9052: Ensure enough delay time for .set_voltage_time_sel

[Sasha Levin]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit a336dc8f683e5be794186b5643cd34cb28dd2c53 ]

Use DIV_ROUND_UP to prevent truncation by integer division issue.
This ensures we return enough delay time.

Also fix returning negative value when new_sel < old_sel.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/da9052-regulator.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 9ececfef42d6..bd91c95f73e0 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -258,7 +258,8 @@ static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 	case DA9052_ID_BUCK3:
 	case DA9052_ID_LDO2:
 	case DA9052_ID_LDO3:
-		ret = (new_sel - old_sel) * info->step_uV / 6250;
+		ret = DIV_ROUND_UP(abs(new_sel - old_sel) * info->step_uV,
+				   6250);
 		break;
 	}
 
-- 
2.30.2