[PATCH v2 4/5] drm/vc4: hdmi: Make sure the device is powered with CEC

[Maxime Ripard <maxime@cerno.tech>]

Similarly to what we encountered with the detect hook with DRM, nothing
actually prevents any of the CEC callback from being run while the HDMI
output is disabled.

However, this is an issue since any register access to the controller
when it's powered down will result in a silent hang.

Let's make sure we run the runtime_pm hooks when the CEC adapter is
opened and closed by the userspace to avoid that issue.

Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 825696e6ef02..c37326f5e263 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1745,8 +1745,14 @@ static int vc4_hdmi_cec_enable(struct cec_adapter *adap)
 	struct vc4_hdmi *vc4_hdmi = cec_get_drvdata(adap);
 	/* clock period in microseconds */
 	const u32 usecs = 1000000 / CEC_CLOCK_FREQ;
-	u32 val = HDMI_READ(HDMI_CEC_CNTRL_5);
+	u32 val;
+	int ret;
 
+	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+	if (ret)
+		return ret;
+
+	val = HDMI_READ(HDMI_CEC_CNTRL_5);
 	val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
 		 VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
 		 VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
@@ -1789,6 +1795,8 @@ static int vc4_hdmi_cec_disable(struct cec_adapter *adap)
 	HDMI_WRITE(HDMI_CEC_CNTRL_5, HDMI_READ(HDMI_CEC_CNTRL_5) |
 		   VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);
 
+	pm_runtime_put(&vc4_hdmi->pdev->dev);
+
 	return 0;
 }
 
-- 
2.31.1