linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Stevens <stevensd@chromium.org>
To: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
	Lu Baolu <baolu.lu@linux.intel.com>, Tom Murphy <murphyt7@tcd.ie>,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	David Stevens <stevensd@chromium.org>
Subject: [PATCH v2 1/4] dma-iommu: fix sync_sg with swiotlb
Date: Fri,  9 Jul 2021 12:34:59 +0900	[thread overview]
Message-ID: <20210709033502.3545820-2-stevensd@google.com> (raw)
In-Reply-To: <20210709033502.3545820-1-stevensd@google.com>

From: David Stevens <stevensd@chromium.org>

The is_swiotlb_buffer function takes the physical address of the swiotlb
buffer, not the physical address of the original buffer. The sglist
contains the physical addresses of the original buffer, so for the
sync_sg functions to work properly when a bounce buffer might have been
used, we need to use iommu_iova_to_phys to look up the physical address.
This is what sync_single does, so call that function on each sglist
segment.

The previous code mostly worked because swiotlb does the transfer on map
and unmap. However, any callers which use DMA_ATTR_SKIP_CPU_SYNC with
sglists or which call sync_sg would not have had anything copied to the
bounce buffer.

Fixes: 82612d66d51d ("iommu: Allow the dma-iommu api to use bounce buffers")
Signed-off-by: David Stevens <stevensd@chromium.org>
---
 drivers/iommu/dma-iommu.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 7bcdd1205535..eac65302439e 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -811,14 +811,14 @@ static void iommu_dma_sync_sg_for_cpu(struct device *dev,
 	if (dev_is_dma_coherent(dev) && !dev_is_untrusted(dev))
 		return;
 
-	for_each_sg(sgl, sg, nelems, i) {
-		if (!dev_is_dma_coherent(dev))
-			arch_sync_dma_for_cpu(sg_phys(sg), sg->length, dir);
-
-		if (is_swiotlb_buffer(sg_phys(sg)))
+	if (dev_is_untrusted(dev))
+		for_each_sg(sgl, sg, nelems, i)
+			iommu_dma_sync_single_for_cpu(dev, sg_dma_address(sg),
+						      sg->length, dir);
+	else
+		for_each_sg(sgl, sg, nelems, i)
 			swiotlb_sync_single_for_cpu(dev, sg_phys(sg),
 						    sg->length, dir);
-	}
 }
 
 static void iommu_dma_sync_sg_for_device(struct device *dev,
@@ -831,14 +831,14 @@ static void iommu_dma_sync_sg_for_device(struct device *dev,
 	if (dev_is_dma_coherent(dev) && !dev_is_untrusted(dev))
 		return;
 
-	for_each_sg(sgl, sg, nelems, i) {
-		if (is_swiotlb_buffer(sg_phys(sg)))
-			swiotlb_sync_single_for_device(dev, sg_phys(sg),
-						       sg->length, dir);
-
-		if (!dev_is_dma_coherent(dev))
+	if (dev_is_untrusted(dev))
+		for_each_sg(sgl, sg, nelems, i)
+			iommu_dma_sync_single_for_device(dev,
+							 sg_dma_address(sg),
+							 sg->length, dir);
+	else
+		for_each_sg(sgl, sg, nelems, i)
 			arch_sync_dma_for_device(sg_phys(sg), sg->length, dir);
-	}
 }
 
 static dma_addr_t iommu_dma_map_page(struct device *dev, struct page *page,
-- 
2.32.0.93.g670b81a890-goog


  reply	other threads:[~2021-07-09  3:35 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-09  3:34 [PATCH v2 0/4] Fixes for dma-iommu swiotlb bounce buffers David Stevens
2021-07-09  3:34 ` David Stevens [this message]
2021-08-02 13:30   ` [PATCH v2 1/4] dma-iommu: fix sync_sg with swiotlb Will Deacon
2021-08-05  3:40     ` David Stevens
2021-07-09  3:35 ` [PATCH v2 2/4] dma-iommu: fix arch_sync_dma for map " David Stevens
2021-08-02 13:40   ` Will Deacon
2021-08-02 13:50     ` Will Deacon
2021-07-09  3:35 ` [PATCH v2 3/4] dma-iommu: pass SKIP_CPU_SYNC to swiotlb unmap David Stevens
2021-08-02 13:54   ` Will Deacon
2021-08-05  5:26     ` David Stevens
2021-08-06 11:38       ` Will Deacon
2021-07-09  3:35 ` [PATCH v2 4/4] dma-iommu: Check CONFIG_SWIOTLB more broadly David Stevens

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210709033502.3545820-2-stevensd@google.com \
    --to=stevensd@chromium.org \
    --cc=baolu.lu@linux.intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=murphyt7@tcd.ie \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).