[PATCH AUTOSEL 5.13 01/53] power: supply: sc27xx: Add missing MODULE_DEVICE_TABLE

[PATCH AUTOSEL 5.13 01/53] power: supply: sc27xx: Add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 603fcfb9d4ec1cad8d66d3bb37f3613afa8a661a ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/sc27xx_fuel_gauge.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
index 9c627618c224..1ae8374e1ceb 100644
--- a/drivers/power/supply/sc27xx_fuel_gauge.c
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -1342,6 +1342,7 @@ static const struct of_device_id sc27xx_fgu_of_match[] = {
 	{ .compatible = "sprd,sc2731-fgu", },
 	{ }
 };
+MODULE_DEVICE_TABLE(of, sc27xx_fgu_of_match);
 
 static struct platform_driver sc27xx_fgu_driver = {
 	.probe = sc27xx_fgu_probe,
-- 
2.30.2

[PATCH AUTOSEL 5.13 02/53] power: supply: sc2731_charger: Add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 2aac79d14d76879c8e307820b31876e315b1b242 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/sc2731_charger.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/power/supply/sc2731_charger.c b/drivers/power/supply/sc2731_charger.c
index 335cb857ef30..288b79836c13 100644
--- a/drivers/power/supply/sc2731_charger.c
+++ b/drivers/power/supply/sc2731_charger.c
@@ -524,6 +524,7 @@ static const struct of_device_id sc2731_charger_of_match[] = {
 	{ .compatible = "sprd,sc2731-charger", },
 	{ }
 };
+MODULE_DEVICE_TABLE(of, sc2731_charger_of_match);
 
 static struct platform_driver sc2731_charger_driver = {
 	.driver = {
-- 
2.30.2

[PATCH AUTOSEL 5.13 03/53] f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit cad83c968c2ebe97905f900326988ed37146c347 ]

As syzbot reported, there is an use-after-free issue during f2fs recovery:

Use-after-free write at 0xffff88823bc16040 (in kfence-#10):
 kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486
 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869
 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945
 mount_bdev+0x26c/0x3a0 fs/super.c:1367
 legacy_get_tree+0xea/0x180 fs/fs_context.c:592
 vfs_get_tree+0x86/0x270 fs/super.c:1497
 do_new_mount fs/namespace.c:2905 [inline]
 path_mount+0x196f/0x2be0 fs/namespace.c:3235
 do_mount fs/namespace.c:3248 [inline]
 __do_sys_mount fs/namespace.c:3456 [inline]
 __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The root cause is multi f2fs filesystem instances can race on accessing
global fsync_entry_slab pointer, result in use-after-free issue of slab
cache, fixes to init/destroy this slab cache only once during module
init/destroy procedure to avoid this issue.

Reported-by: syzbot+9d90dad32dd9727ed084@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/f2fs.h     |  2 ++
 fs/f2fs/recovery.c | 23 ++++++++++++++---------
 fs/f2fs/super.c    |  8 +++++++-
 3 files changed, 23 insertions(+), 10 deletions(-)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index c83d90125ebd..a5de48e768d7 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3566,6 +3566,8 @@ void f2fs_destroy_garbage_collection_cache(void);
  */
 int f2fs_recover_fsync_data(struct f2fs_sb_info *sbi, bool check_only);
 bool f2fs_space_for_roll_forward(struct f2fs_sb_info *sbi);
+int __init f2fs_create_recovery_cache(void);
+void f2fs_destroy_recovery_cache(void);
 
 /*
  * debug.c
diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index 422146c6d866..4b2f7d1d5bf4 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -788,13 +788,6 @@ int f2fs_recover_fsync_data(struct f2fs_sb_info *sbi, bool check_only)
 	quota_enabled = f2fs_enable_quota_files(sbi, s_flags & SB_RDONLY);
 #endif
 
-	fsync_entry_slab = f2fs_kmem_cache_create("f2fs_fsync_inode_entry",
-			sizeof(struct fsync_inode_entry));
-	if (!fsync_entry_slab) {
-		err = -ENOMEM;
-		goto out;
-	}
-
 	INIT_LIST_HEAD(&inode_list);
 	INIT_LIST_HEAD(&tmp_inode_list);
 	INIT_LIST_HEAD(&dir_list);
@@ -867,8 +860,6 @@ int f2fs_recover_fsync_data(struct f2fs_sb_info *sbi, bool check_only)
 		}
 	}
 
-	kmem_cache_destroy(fsync_entry_slab);
-out:
 #ifdef CONFIG_QUOTA
 	/* Turn quotas off */
 	if (quota_enabled)
@@ -878,3 +869,17 @@ int f2fs_recover_fsync_data(struct f2fs_sb_info *sbi, bool check_only)
 
 	return ret ? ret : err;
 }
+
+int __init f2fs_create_recovery_cache(void)
+{
+	fsync_entry_slab = f2fs_kmem_cache_create("f2fs_fsync_inode_entry",
+					sizeof(struct fsync_inode_entry));
+	if (!fsync_entry_slab)
+		return -ENOMEM;
+	return 0;
+}
+
+void f2fs_destroy_recovery_cache(void)
+{
+	kmem_cache_destroy(fsync_entry_slab);
+}
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 7d325bfaf65a..096492caaa6b 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -4227,9 +4227,12 @@ static int __init init_f2fs_fs(void)
 	err = f2fs_create_checkpoint_caches();
 	if (err)
 		goto free_segment_manager_caches;
-	err = f2fs_create_extent_cache();
+	err = f2fs_create_recovery_cache();
 	if (err)
 		goto free_checkpoint_caches;
+	err = f2fs_create_extent_cache();
+	if (err)
+		goto free_recovery_cache;
 	err = f2fs_create_garbage_collection_cache();
 	if (err)
 		goto free_extent_cache;
@@ -4278,6 +4281,8 @@ static int __init init_f2fs_fs(void)
 	f2fs_destroy_garbage_collection_cache();
 free_extent_cache:
 	f2fs_destroy_extent_cache();
+free_recovery_cache:
+	f2fs_destroy_recovery_cache();
 free_checkpoint_caches:
 	f2fs_destroy_checkpoint_caches();
 free_segment_manager_caches:
@@ -4303,6 +4308,7 @@ static void __exit exit_f2fs_fs(void)
 	f2fs_exit_sysfs();
 	f2fs_destroy_garbage_collection_cache();
 	f2fs_destroy_extent_cache();
+	f2fs_destroy_recovery_cache();
 	f2fs_destroy_checkpoint_caches();
 	f2fs_destroy_segment_manager_caches();
 	f2fs_destroy_node_manager_caches();
-- 
2.30.2

[PATCH AUTOSEL 5.13 04/53] pwm: spear: Don't modify HW state in .remove callback

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit b601a18f12383001e7a8da238de7ca1559ebc450 ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

So drop the hardware modification from the .remove() callback.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-spear.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c
index 1a1cedfd11ce..6879b49581b3 100644
--- a/drivers/pwm/pwm-spear.c
+++ b/drivers/pwm/pwm-spear.c
@@ -228,10 +228,6 @@ static int spear_pwm_probe(struct platform_device *pdev)
 static int spear_pwm_remove(struct platform_device *pdev)
 {
 	struct spear_pwm_chip *pc = platform_get_drvdata(pdev);
-	int i;
-
-	for (i = 0; i < NUM_PWM; i++)
-		pwm_disable(&pc->chip.pwms[i]);
 
 	/* clk was prepared in probe, hence unprepare it here */
 	clk_unprepare(pc->clk);
-- 
2.30.2

[PATCH AUTOSEL 5.13 05/53] PCI: ftpci100: Rename macro name collision

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 5be967d5016ac5ffb9c4d0df51b48441ee4d5ed1 ]

PCI_IOSIZE is defined in mach-loongson64/spaces.h, so change the name
of the PCI_* macros in pci-ftpci100.c to use FTPCI_* so that they are
more localized and won't conflict with other drivers or arches.

../drivers/pci/controller/pci-ftpci100.c:37: warning: "PCI_IOSIZE" redefined
   37 | #define PCI_IOSIZE 0x00
      |
In file included from ../arch/mips/include/asm/addrspace.h:13,
...              from ../drivers/pci/controller/pci-ftpci100.c:15:
arch/mips/include/asm/mach-loongson64/spaces.h:11: note: this is the location of the previous definition
   11 | #define PCI_IOSIZE SZ_16M

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210517234117.3660-1-rdunlap@infradead.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-ftpci100.c | 30 +++++++++++++--------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c
index da3cd216da00..aefef1986201 100644
--- a/drivers/pci/controller/pci-ftpci100.c
+++ b/drivers/pci/controller/pci-ftpci100.c
@@ -34,12 +34,12 @@
  * Special configuration registers directly in the first few words
  * in I/O space.
  */
-#define PCI_IOSIZE	0x00
-#define PCI_PROT	0x04 /* AHB protection */
-#define PCI_CTRL	0x08 /* PCI control signal */
-#define PCI_SOFTRST	0x10 /* Soft reset counter and response error enable */
-#define PCI_CONFIG	0x28 /* PCI configuration command register */
-#define PCI_DATA	0x2C
+#define FTPCI_IOSIZE	0x00
+#define FTPCI_PROT	0x04 /* AHB protection */
+#define FTPCI_CTRL	0x08 /* PCI control signal */
+#define FTPCI_SOFTRST	0x10 /* Soft reset counter and response error enable */
+#define FTPCI_CONFIG	0x28 /* PCI configuration command register */
+#define FTPCI_DATA	0x2C
 
 #define FARADAY_PCI_STATUS_CMD		0x04 /* Status and command */
 #define FARADAY_PCI_PMC			0x40 /* Power management control */
@@ -195,9 +195,9 @@ static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number,
 			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
 			PCI_CONF_WHERE(config) |
 			PCI_CONF_ENABLE,
-			p->base + PCI_CONFIG);
+			p->base + FTPCI_CONFIG);
 
-	*value = readl(p->base + PCI_DATA);
+	*value = readl(p->base + FTPCI_DATA);
 
 	if (size == 1)
 		*value = (*value >> (8 * (config & 3))) & 0xFF;
@@ -230,17 +230,17 @@ static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number,
 			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
 			PCI_CONF_WHERE(config) |
 			PCI_CONF_ENABLE,
-			p->base + PCI_CONFIG);
+			p->base + FTPCI_CONFIG);
 
 	switch (size) {
 	case 4:
-		writel(value, p->base + PCI_DATA);
+		writel(value, p->base + FTPCI_DATA);
 		break;
 	case 2:
-		writew(value, p->base + PCI_DATA + (config & 3));
+		writew(value, p->base + FTPCI_DATA + (config & 3));
 		break;
 	case 1:
-		writeb(value, p->base + PCI_DATA + (config & 3));
+		writeb(value, p->base + FTPCI_DATA + (config & 3));
 		break;
 	default:
 		ret = PCIBIOS_BAD_REGISTER_NUMBER;
@@ -469,7 +469,7 @@ static int faraday_pci_probe(struct platform_device *pdev)
 		if (!faraday_res_to_memcfg(io->start - win->offset,
 					   resource_size(io), &val)) {
 			/* setup I/O space size */
-			writel(val, p->base + PCI_IOSIZE);
+			writel(val, p->base + FTPCI_IOSIZE);
 		} else {
 			dev_err(dev, "illegal IO mem size\n");
 			return -EINVAL;
@@ -477,11 +477,11 @@ static int faraday_pci_probe(struct platform_device *pdev)
 	}
 
 	/* Setup hostbridge */
-	val = readl(p->base + PCI_CTRL);
+	val = readl(p->base + FTPCI_CTRL);
 	val |= PCI_COMMAND_IO;
 	val |= PCI_COMMAND_MEMORY;
 	val |= PCI_COMMAND_MASTER;
-	writel(val, p->base + PCI_CTRL);
+	writel(val, p->base + FTPCI_CTRL);
 	/* Mask and clear all interrupts */
 	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000);
 	if (variant->cascaded_irq) {
-- 
2.30.2

[PATCH AUTOSEL 5.13 06/53] power: supply: ab8500: Move to componentized binding

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 1c1f13a006ed0d71bb5664c8b7e3e77a28da3beb ]

The driver has problems with the different components of
the charging code racing with each other to probe().

This results in all four subdrivers populating battery
information to ascertain that it is populated for their
own needs for example.

Fix this by using component probing and thus expressing
to the kernel that these are dependent components.
The probes can happen in any order and will only acquire
resources such as state container, regulators and
interrupts and initialize the data structures, but no
execution happens until the .bind() callback is called.

The charging driver is the main component and binds
first, then bind in order the three subcomponents:
ab8500-fg, ab8500-btemp and ab8500-chargalg.

Do some housekeeping while we are moving the code around.
Like use devm_* for IRQs so as to cut down on some
boilerplate.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/ab8500-bm.h       |   4 +
 drivers/power/supply/ab8500_btemp.c    | 118 ++++-----
 drivers/power/supply/ab8500_charger.c  | 339 ++++++++++++++-----------
 drivers/power/supply/ab8500_fg.c       | 136 +++++-----
 drivers/power/supply/abx500_chargalg.c | 116 +++++----
 5 files changed, 379 insertions(+), 334 deletions(-)

diff --git a/drivers/power/supply/ab8500-bm.h b/drivers/power/supply/ab8500-bm.h
index 41c69a4f2a1f..012595a9d269 100644
--- a/drivers/power/supply/ab8500-bm.h
+++ b/drivers/power/supply/ab8500-bm.h
@@ -730,4 +730,8 @@ int ab8500_bm_of_probe(struct device *dev,
 		       struct device_node *np,
 		       struct abx500_bm_data *bm);
 
+extern struct platform_driver ab8500_fg_driver;
+extern struct platform_driver ab8500_btemp_driver;
+extern struct platform_driver abx500_chargalg_driver;
+
 #endif /* _AB8500_CHARGER_H_ */
diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
index fdfcd59fc43e..3598b5a748e7 100644
--- a/drivers/power/supply/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/component.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -932,26 +933,6 @@ static int __maybe_unused ab8500_btemp_suspend(struct device *dev)
 	return 0;
 }
 
-static int ab8500_btemp_remove(struct platform_device *pdev)
-{
-	struct ab8500_btemp *di = platform_get_drvdata(pdev);
-	int i, irq;
-
-	/* Disable interrupts */
-	for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
-		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
-		free_irq(irq, di);
-	}
-
-	/* Delete the work queue */
-	destroy_workqueue(di->btemp_wq);
-
-	flush_scheduled_work();
-	power_supply_unregister(di->btemp_psy);
-
-	return 0;
-}
-
 static char *supply_interface[] = {
 	"ab8500_chargalg",
 	"ab8500_fg",
@@ -966,6 +947,40 @@ static const struct power_supply_desc ab8500_btemp_desc = {
 	.external_power_changed	= ab8500_btemp_external_power_changed,
 };
 
+static int ab8500_btemp_bind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	/* Create a work queue for the btemp */
+	di->btemp_wq =
+		alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
+	if (di->btemp_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Kick off periodic temperature measurements */
+	ab8500_btemp_periodic(di, true);
+
+	return 0;
+}
+
+static void ab8500_btemp_unbind(struct device *dev, struct device *master,
+				void *data)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	/* Delete the work queue */
+	destroy_workqueue(di->btemp_wq);
+	flush_scheduled_work();
+}
+
+static const struct component_ops ab8500_btemp_component_ops = {
+	.bind = ab8500_btemp_bind,
+	.unbind = ab8500_btemp_unbind,
+};
+
 static int ab8500_btemp_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -1011,14 +1026,6 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
 	psy_cfg.drv_data = di;
 
-	/* Create a work queue for the btemp */
-	di->btemp_wq =
-		alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
-	if (di->btemp_wq == NULL) {
-		dev_err(dev, "failed to create work queue\n");
-		return -ENOMEM;
-	}
-
 	/* Init work for measuring temperature periodically */
 	INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
 		ab8500_btemp_periodic_work);
@@ -1031,7 +1038,7 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 		AB8500_BTEMP_HIGH_TH, &val);
 	if (ret < 0) {
 		dev_err(dev, "%s ab8500 read failed\n", __func__);
-		goto free_btemp_wq;
+		return ret;
 	}
 	switch (val) {
 	case BTEMP_HIGH_TH_57_0:
@@ -1050,30 +1057,28 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	}
 
 	/* Register BTEMP power supply class */
-	di->btemp_psy = power_supply_register(dev, &ab8500_btemp_desc,
-					      &psy_cfg);
+	di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc,
+						   &psy_cfg);
 	if (IS_ERR(di->btemp_psy)) {
 		dev_err(dev, "failed to register BTEMP psy\n");
-		ret = PTR_ERR(di->btemp_psy);
-		goto free_btemp_wq;
+		return PTR_ERR(di->btemp_psy);
 	}
 
 	/* Register interrupts */
 	for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
-		if (irq < 0) {
-			ret = irq;
-			goto free_irq;
-		}
+		if (irq < 0)
+			return irq;
 
-		ret = request_threaded_irq(irq, NULL, ab8500_btemp_irq[i].isr,
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+			ab8500_btemp_irq[i].isr,
 			IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
 			ab8500_btemp_irq[i].name, di);
 
 		if (ret) {
 			dev_err(dev, "failed to request %s IRQ %d: %d\n"
 				, ab8500_btemp_irq[i].name, irq, ret);
-			goto free_irq;
+			return ret;
 		}
 		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
 			ab8500_btemp_irq[i].name, irq, ret);
@@ -1081,23 +1086,16 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, di);
 
-	/* Kick off periodic temperature measurements */
-	ab8500_btemp_periodic(di, true);
 	list_add_tail(&di->node, &ab8500_btemp_list);
 
-	return ret;
+	return component_add(dev, &ab8500_btemp_component_ops);
+}
 
-free_irq:
-	/* We also have to free all successfully registered irqs */
-	for (i = i - 1; i >= 0; i--) {
-		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
-		free_irq(irq, di);
-	}
+static int ab8500_btemp_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &ab8500_btemp_component_ops);
 
-	power_supply_unregister(di->btemp_psy);
-free_btemp_wq:
-	destroy_workqueue(di->btemp_wq);
-	return ret;
+	return 0;
 }
 
 static SIMPLE_DEV_PM_OPS(ab8500_btemp_pm_ops, ab8500_btemp_suspend, ab8500_btemp_resume);
@@ -1107,7 +1105,7 @@ static const struct of_device_id ab8500_btemp_match[] = {
 	{ },
 };
 
-static struct platform_driver ab8500_btemp_driver = {
+struct platform_driver ab8500_btemp_driver = {
 	.probe = ab8500_btemp_probe,
 	.remove = ab8500_btemp_remove,
 	.driver = {
@@ -1116,20 +1114,6 @@ static struct platform_driver ab8500_btemp_driver = {
 		.pm = &ab8500_btemp_pm_ops,
 	},
 };
-
-static int __init ab8500_btemp_init(void)
-{
-	return platform_driver_register(&ab8500_btemp_driver);
-}
-
-static void __exit ab8500_btemp_exit(void)
-{
-	platform_driver_unregister(&ab8500_btemp_driver);
-}
-
-device_initcall(ab8500_btemp_init);
-module_exit(ab8500_btemp_exit);
-
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
 MODULE_ALIAS("platform:ab8500-btemp");
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index a9be10eb2c22..af32cfae9f19 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/component.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/notifier.h>
@@ -3276,10 +3277,74 @@ static struct notifier_block charger_nb = {
 	.notifier_call = ab8500_external_charger_prepare,
 };
 
-static int ab8500_charger_remove(struct platform_device *pdev)
+static char *supply_interface[] = {
+	"ab8500_chargalg",
+	"ab8500_fg",
+	"ab8500_btemp",
+};
+
+static const struct power_supply_desc ab8500_ac_chg_desc = {
+	.name		= "ab8500_ac",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= ab8500_charger_ac_props,
+	.num_properties	= ARRAY_SIZE(ab8500_charger_ac_props),
+	.get_property	= ab8500_charger_ac_get_property,
+};
+
+static const struct power_supply_desc ab8500_usb_chg_desc = {
+	.name		= "ab8500_usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= ab8500_charger_usb_props,
+	.num_properties	= ARRAY_SIZE(ab8500_charger_usb_props),
+	.get_property	= ab8500_charger_usb_get_property,
+};
+
+static int ab8500_charger_bind(struct device *dev)
 {
-	struct ab8500_charger *di = platform_get_drvdata(pdev);
-	int i, irq, ret;
+	struct ab8500_charger *di = dev_get_drvdata(dev);
+	int ch_stat;
+	int ret;
+
+	/* Create a work queue for the charger */
+	di->charger_wq = alloc_ordered_workqueue("ab8500_charger_wq",
+						 WQ_MEM_RECLAIM);
+	if (di->charger_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	ch_stat = ab8500_charger_detect_chargers(di, false);
+
+	if (ch_stat & AC_PW_CONN) {
+		if (is_ab8500(di->parent))
+			queue_delayed_work(di->charger_wq,
+					   &di->ac_charger_attached_work,
+					   HZ);
+	}
+	if (ch_stat & USB_PW_CONN) {
+		if (is_ab8500(di->parent))
+			queue_delayed_work(di->charger_wq,
+					   &di->usb_charger_attached_work,
+					   HZ);
+		di->vbus_detected = true;
+		di->vbus_detected_start = true;
+		queue_work(di->charger_wq,
+			   &di->detect_usb_type_work);
+	}
+
+	ret = component_bind_all(dev, di);
+	if (ret) {
+		dev_err(dev, "can't bind component devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ab8500_charger_unbind(struct device *dev)
+{
+	struct ab8500_charger *di = dev_get_drvdata(dev);
+	int ret;
 
 	/* Disable AC charging */
 	ab8500_charger_ac_en(&di->ac_chg, false, 0, 0);
@@ -3287,68 +3352,47 @@ static int ab8500_charger_remove(struct platform_device *pdev)
 	/* Disable USB charging */
 	ab8500_charger_usb_en(&di->usb_chg, false, 0, 0);
 
-	/* Disable interrupts */
-	for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
-		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
-		free_irq(irq, di);
-	}
-
 	/* Backup battery voltage and current disable */
 	ret = abx500_mask_and_set_register_interruptible(di->dev,
 		AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0);
 	if (ret < 0)
 		dev_err(di->dev, "%s mask and set failed\n", __func__);
 
-	usb_unregister_notifier(di->usb_phy, &di->nb);
-	usb_put_phy(di->usb_phy);
-
 	/* Delete the work queue */
 	destroy_workqueue(di->charger_wq);
 
-	/* Unregister external charger enable notifier */
-	if (!di->ac_chg.enabled)
-		blocking_notifier_chain_unregister(
-			&charger_notifier_list, &charger_nb);
-
 	flush_scheduled_work();
-	if (di->usb_chg.enabled)
-		power_supply_unregister(di->usb_chg.psy);
-
-	if (di->ac_chg.enabled && !di->ac_chg.external)
-		power_supply_unregister(di->ac_chg.psy);
 
-	return 0;
+	/* Unbind fg, btemp, algorithm */
+	component_unbind_all(dev, di);
 }
 
-static char *supply_interface[] = {
-	"ab8500_chargalg",
-	"ab8500_fg",
-	"ab8500_btemp",
+static const struct component_master_ops ab8500_charger_comp_ops = {
+	.bind = ab8500_charger_bind,
+	.unbind = ab8500_charger_unbind,
 };
 
-static const struct power_supply_desc ab8500_ac_chg_desc = {
-	.name		= "ab8500_ac",
-	.type		= POWER_SUPPLY_TYPE_MAINS,
-	.properties	= ab8500_charger_ac_props,
-	.num_properties	= ARRAY_SIZE(ab8500_charger_ac_props),
-	.get_property	= ab8500_charger_ac_get_property,
+static struct platform_driver *const ab8500_charger_component_drivers[] = {
+	&ab8500_fg_driver,
+	&ab8500_btemp_driver,
+	&abx500_chargalg_driver,
 };
 
-static const struct power_supply_desc ab8500_usb_chg_desc = {
-	.name		= "ab8500_usb",
-	.type		= POWER_SUPPLY_TYPE_USB,
-	.properties	= ab8500_charger_usb_props,
-	.num_properties	= ARRAY_SIZE(ab8500_charger_usb_props),
-	.get_property	= ab8500_charger_usb_get_property,
-};
+static int ab8500_charger_compare_dev(struct device *dev, void *data)
+{
+	return dev == data;
+}
 
 static int ab8500_charger_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct component_match *match = NULL;
 	struct power_supply_config ac_psy_cfg = {}, usb_psy_cfg = {};
 	struct ab8500_charger *di;
-	int irq, i, charger_status, ret = 0, ch_stat;
-	struct device *dev = &pdev->dev;
+	int charger_status;
+	int i, irq;
+	int ret;
 
 	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
 	if (!di)
@@ -3393,6 +3437,38 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	/*
+	 * VDD ADC supply needs to be enabled from this driver when there
+	 * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
+	 * interrupts during charging
+	 */
+	di->regu = devm_regulator_get(dev, "vddadc");
+	if (IS_ERR(di->regu)) {
+		ret = PTR_ERR(di->regu);
+		dev_err(dev, "failed to get vddadc regulator\n");
+		return ret;
+	}
+
+	/* Request interrupts */
+	for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
+		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+		if (irq < 0)
+			return irq;
+
+		ret = devm_request_threaded_irq(dev,
+			irq, NULL, ab8500_charger_irq[i].isr,
+			IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
+			ab8500_charger_irq[i].name, di);
+
+		if (ret != 0) {
+			dev_err(dev, "failed to request %s IRQ %d: %d\n"
+				, ab8500_charger_irq[i].name, irq, ret);
+			return ret;
+		}
+		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
+			ab8500_charger_irq[i].name, irq, ret);
+	}
+
 	/* initialize lock */
 	spin_lock_init(&di->usb_state.usb_lock);
 	mutex_init(&di->usb_ipt_crnt_lock);
@@ -3422,11 +3498,6 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	di->ac_chg.enabled = di->bm->ac_enabled;
 	di->ac_chg.external = false;
 
-	/*notifier for external charger enabling*/
-	if (!di->ac_chg.enabled)
-		blocking_notifier_chain_register(
-			&charger_notifier_list, &charger_nb);
-
 	/* USB supply */
 	/* ux500_charger sub-class */
 	di->usb_chg.ops.enable = &ab8500_charger_usb_en;
@@ -3442,14 +3513,6 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	di->usb_chg.external = false;
 	di->usb_state.usb_current = -1;
 
-	/* Create a work queue for the charger */
-	di->charger_wq = alloc_ordered_workqueue("ab8500_charger_wq",
-						 WQ_MEM_RECLAIM);
-	if (di->charger_wq == NULL) {
-		dev_err(dev, "failed to create work queue\n");
-		return -ENOMEM;
-	}
-
 	mutex_init(&di->charger_attached_mutex);
 
 	/* Init work for HW failure check */
@@ -3500,63 +3563,36 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	INIT_WORK(&di->check_usb_thermal_prot_work,
 		ab8500_charger_check_usb_thermal_prot_work);
 
-	/*
-	 * VDD ADC supply needs to be enabled from this driver when there
-	 * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
-	 * interrupts during charging
-	 */
-	di->regu = devm_regulator_get(dev, "vddadc");
-	if (IS_ERR(di->regu)) {
-		ret = PTR_ERR(di->regu);
-		dev_err(dev, "failed to get vddadc regulator\n");
-		goto free_charger_wq;
-	}
-
 
 	/* Initialize OVV, and other registers */
 	ret = ab8500_charger_init_hw_registers(di);
 	if (ret) {
 		dev_err(dev, "failed to initialize ABB registers\n");
-		goto free_charger_wq;
+		return ret;
 	}
 
 	/* Register AC charger class */
 	if (di->ac_chg.enabled) {
-		di->ac_chg.psy = power_supply_register(dev,
+		di->ac_chg.psy = devm_power_supply_register(dev,
 						       &ab8500_ac_chg_desc,
 						       &ac_psy_cfg);
 		if (IS_ERR(di->ac_chg.psy)) {
 			dev_err(dev, "failed to register AC charger\n");
-			ret = PTR_ERR(di->ac_chg.psy);
-			goto free_charger_wq;
+			return PTR_ERR(di->ac_chg.psy);
 		}
 	}
 
 	/* Register USB charger class */
 	if (di->usb_chg.enabled) {
-		di->usb_chg.psy = power_supply_register(dev,
+		di->usb_chg.psy = devm_power_supply_register(dev,
 							&ab8500_usb_chg_desc,
 							&usb_psy_cfg);
 		if (IS_ERR(di->usb_chg.psy)) {
 			dev_err(dev, "failed to register USB charger\n");
-			ret = PTR_ERR(di->usb_chg.psy);
-			goto free_ac;
+			return PTR_ERR(di->usb_chg.psy);
 		}
 	}
 
-	di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(di->usb_phy)) {
-		dev_err(dev, "failed to get usb transceiver\n");
-		ret = -EINVAL;
-		goto free_usb;
-	}
-	di->nb.notifier_call = ab8500_charger_usb_notifier_call;
-	ret = usb_register_notifier(di->usb_phy, &di->nb);
-	if (ret) {
-		dev_err(dev, "failed to register usb notifier\n");
-		goto put_usb_phy;
-	}
-
 	/* Identify the connected charger types during startup */
 	charger_status = ab8500_charger_detect_chargers(di, true);
 	if (charger_status & AC_PW_CONN) {
@@ -3566,78 +3602,86 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 		sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present");
 	}
 
-	if (charger_status & USB_PW_CONN) {
-		di->vbus_detected = true;
-		di->vbus_detected_start = true;
-		queue_work(di->charger_wq,
-			&di->detect_usb_type_work);
-	}
-
-	/* Register interrupts */
-	for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
-		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
-		if (irq < 0) {
-			ret = irq;
-			goto free_irq;
-		}
+	platform_set_drvdata(pdev, di);
 
-		ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr,
-			IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
-			ab8500_charger_irq[i].name, di);
+	/* Create something that will match the subdrivers when we bind */
+	for (i = 0; i < ARRAY_SIZE(ab8500_charger_component_drivers); i++) {
+		struct device_driver *drv = &ab8500_charger_component_drivers[i]->driver;
+		struct device *p = NULL, *d;
 
-		if (ret != 0) {
-			dev_err(dev, "failed to request %s IRQ %d: %d\n"
-				, ab8500_charger_irq[i].name, irq, ret);
-			goto free_irq;
+		while ((d = platform_find_device_by_driver(p, drv))) {
+			put_device(p);
+			component_match_add(dev, &match,
+					    ab8500_charger_compare_dev, d);
+			p = d;
 		}
-		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
-			ab8500_charger_irq[i].name, irq, ret);
+		put_device(p);
+	}
+	if (!match) {
+		dev_err(dev, "no matching components\n");
+		return -ENODEV;
+	}
+	if (IS_ERR(match)) {
+		dev_err(dev, "could not create component match\n");
+		return PTR_ERR(match);
 	}
 
-	platform_set_drvdata(pdev, di);
+	/* Notifier for external charger enabling */
+	if (!di->ac_chg.enabled)
+		blocking_notifier_chain_register(
+			&charger_notifier_list, &charger_nb);
 
-	mutex_lock(&di->charger_attached_mutex);
 
-	ch_stat = ab8500_charger_detect_chargers(di, false);
-
-	if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) {
-		if (is_ab8500(di->parent))
-			queue_delayed_work(di->charger_wq,
-					   &di->ac_charger_attached_work,
-					   HZ);
+	di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(di->usb_phy)) {
+		dev_err(dev, "failed to get usb transceiver\n");
+		ret = -EINVAL;
+		goto out_charger_notifier;
 	}
-	if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) {
-		if (is_ab8500(di->parent))
-			queue_delayed_work(di->charger_wq,
-					   &di->usb_charger_attached_work,
-					   HZ);
+	di->nb.notifier_call = ab8500_charger_usb_notifier_call;
+	ret = usb_register_notifier(di->usb_phy, &di->nb);
+	if (ret) {
+		dev_err(dev, "failed to register usb notifier\n");
+		goto put_usb_phy;
 	}
 
-	mutex_unlock(&di->charger_attached_mutex);
 
-	return ret;
+	ret = component_master_add_with_match(&pdev->dev,
+					      &ab8500_charger_comp_ops,
+					      match);
+	if (ret) {
+		dev_err(dev, "failed to add component master\n");
+		goto free_notifier;
+	}
 
-free_irq:
-	usb_unregister_notifier(di->usb_phy, &di->nb);
+	return 0;
 
-	/* We also have to free all successfully registered irqs */
-	for (i = i - 1; i >= 0; i--) {
-		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
-		free_irq(irq, di);
-	}
+free_notifier:
+	usb_unregister_notifier(di->usb_phy, &di->nb);
 put_usb_phy:
 	usb_put_phy(di->usb_phy);
-free_usb:
-	if (di->usb_chg.enabled)
-		power_supply_unregister(di->usb_chg.psy);
-free_ac:
-	if (di->ac_chg.enabled)
-		power_supply_unregister(di->ac_chg.psy);
-free_charger_wq:
-	destroy_workqueue(di->charger_wq);
+out_charger_notifier:
+	if (!di->ac_chg.enabled)
+		blocking_notifier_chain_unregister(
+			&charger_notifier_list, &charger_nb);
 	return ret;
 }
 
+static int ab8500_charger_remove(struct platform_device *pdev)
+{
+	struct ab8500_charger *di = platform_get_drvdata(pdev);
+
+	component_master_del(&pdev->dev, &ab8500_charger_comp_ops);
+
+	usb_unregister_notifier(di->usb_phy, &di->nb);
+	usb_put_phy(di->usb_phy);
+	if (!di->ac_chg.enabled)
+		blocking_notifier_chain_unregister(
+			&charger_notifier_list, &charger_nb);
+
+	return 0;
+}
+
 static SIMPLE_DEV_PM_OPS(ab8500_charger_pm_ops, ab8500_charger_suspend, ab8500_charger_resume);
 
 static const struct of_device_id ab8500_charger_match[] = {
@@ -3657,15 +3701,24 @@ static struct platform_driver ab8500_charger_driver = {
 
 static int __init ab8500_charger_init(void)
 {
+	int ret;
+
+	ret = platform_register_drivers(ab8500_charger_component_drivers,
+			ARRAY_SIZE(ab8500_charger_component_drivers));
+	if (ret)
+		return ret;
+
 	return platform_driver_register(&ab8500_charger_driver);
 }
 
 static void __exit ab8500_charger_exit(void)
 {
+	platform_unregister_drivers(ab8500_charger_component_drivers,
+			ARRAY_SIZE(ab8500_charger_component_drivers));
 	platform_driver_unregister(&ab8500_charger_driver);
 }
 
-subsys_initcall_sync(ab8500_charger_init);
+module_init(ab8500_charger_init);
 module_exit(ab8500_charger_exit);
 
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 0c7c01a0d979..acf0f2471c0b 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -17,6 +17,7 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/component.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -2980,27 +2981,6 @@ static int __maybe_unused ab8500_fg_suspend(struct device *dev)
 	return 0;
 }
 
-static int ab8500_fg_remove(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct ab8500_fg *di = platform_get_drvdata(pdev);
-
-	list_del(&di->node);
-
-	/* Disable coulomb counter */
-	ret = ab8500_fg_coulomb_counter(di, false);
-	if (ret)
-		dev_err(di->dev, "failed to disable coulomb counter\n");
-
-	destroy_workqueue(di->fg_wq);
-	ab8500_fg_sysfs_exit(di);
-
-	flush_scheduled_work();
-	ab8500_fg_sysfs_psy_remove_attrs(di);
-	power_supply_unregister(di->fg_psy);
-	return ret;
-}
-
 /* ab8500 fg driver interrupts and their respective isr */
 static struct ab8500_fg_interrupts ab8500_fg_irq[] = {
 	{"NCONV_ACCU", ab8500_fg_cc_convend_handler},
@@ -3024,11 +3004,50 @@ static const struct power_supply_desc ab8500_fg_desc = {
 	.external_power_changed	= ab8500_fg_external_power_changed,
 };
 
+static int ab8500_fg_bind(struct device *dev, struct device *master,
+			  void *data)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+
+	/* Create a work queue for running the FG algorithm */
+	di->fg_wq = alloc_ordered_workqueue("ab8500_fg_wq", WQ_MEM_RECLAIM);
+	if (di->fg_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Start the coulomb counter */
+	ab8500_fg_coulomb_counter(di, true);
+	/* Run the FG algorithm */
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+
+	return 0;
+}
+
+static void ab8500_fg_unbind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+	int ret;
+
+	/* Disable coulomb counter */
+	ret = ab8500_fg_coulomb_counter(di, false);
+	if (ret)
+		dev_err(dev, "failed to disable coulomb counter\n");
+
+	destroy_workqueue(di->fg_wq);
+	flush_scheduled_work();
+}
+
+static const struct component_ops ab8500_fg_component_ops = {
+	.bind = ab8500_fg_bind,
+	.unbind = ab8500_fg_unbind,
+};
+
 static int ab8500_fg_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
-	struct power_supply_config psy_cfg = {};
 	struct device *dev = &pdev->dev;
+	struct power_supply_config psy_cfg = {};
 	struct ab8500_fg *di;
 	int i, irq;
 	int ret = 0;
@@ -3074,13 +3093,6 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
 	ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
 
-	/* Create a work queue for running the FG algorithm */
-	di->fg_wq = alloc_ordered_workqueue("ab8500_fg_wq", WQ_MEM_RECLAIM);
-	if (di->fg_wq == NULL) {
-		dev_err(dev, "failed to create work queue\n");
-		return -ENOMEM;
-	}
-
 	/* Init work for running the fg algorithm instantly */
 	INIT_WORK(&di->fg_work, ab8500_fg_instant_work);
 
@@ -3113,7 +3125,7 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	ret = ab8500_fg_init_hw_registers(di);
 	if (ret) {
 		dev_err(dev, "failed to initialize registers\n");
-		goto free_inst_curr_wq;
+		return ret;
 	}
 
 	/* Consider battery unknown until we're informed otherwise */
@@ -3121,15 +3133,13 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	di->flags.batt_id_received = false;
 
 	/* Register FG power supply class */
-	di->fg_psy = power_supply_register(dev, &ab8500_fg_desc, &psy_cfg);
+	di->fg_psy = devm_power_supply_register(dev, &ab8500_fg_desc, &psy_cfg);
 	if (IS_ERR(di->fg_psy)) {
 		dev_err(dev, "failed to register FG psy\n");
-		ret = PTR_ERR(di->fg_psy);
-		goto free_inst_curr_wq;
+		return PTR_ERR(di->fg_psy);
 	}
 
 	di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
-	ab8500_fg_coulomb_counter(di, true);
 
 	/*
 	 * Initialize completion used to notify completion and start
@@ -3141,19 +3151,18 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	/* Register primary interrupt handlers */
 	for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name);
-		if (irq < 0) {
-			ret = irq;
-			goto free_irq;
-		}
+		if (irq < 0)
+			return irq;
 
-		ret = request_threaded_irq(irq, NULL, ab8500_fg_irq[i].isr,
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+				  ab8500_fg_irq[i].isr,
 				  IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
 				  ab8500_fg_irq[i].name, di);
 
 		if (ret != 0) {
 			dev_err(dev, "failed to request %s IRQ %d: %d\n",
 				ab8500_fg_irq[i].name, irq, ret);
-			goto free_irq;
+			return ret;
 		}
 		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
 			ab8500_fg_irq[i].name, irq, ret);
@@ -3168,14 +3177,14 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	ret = ab8500_fg_sysfs_init(di);
 	if (ret) {
 		dev_err(dev, "failed to create sysfs entry\n");
-		goto free_irq;
+		return ret;
 	}
 
 	ret = ab8500_fg_sysfs_psy_create_attrs(di);
 	if (ret) {
 		dev_err(dev, "failed to create FG psy\n");
 		ab8500_fg_sysfs_exit(di);
-		goto free_irq;
+		return ret;
 	}
 
 	/* Calibrate the fg first time */
@@ -3185,24 +3194,21 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	/* Use room temp as default value until we get an update from driver. */
 	di->bat_temp = 210;
 
-	/* Run the FG algorithm */
-	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
-
 	list_add_tail(&di->node, &ab8500_fg_list);
 
-	return ret;
+	return component_add(dev, &ab8500_fg_component_ops);
+}
 
-free_irq:
-	/* We also have to free all registered irqs */
-	while (--i >= 0) {
-		/* Last assignment of i from primary interrupt handlers */
-		irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name);
-		free_irq(irq, di);
-	}
+static int ab8500_fg_remove(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct ab8500_fg *di = platform_get_drvdata(pdev);
+
+	component_del(&pdev->dev, &ab8500_fg_component_ops);
+	list_del(&di->node);
+	ab8500_fg_sysfs_exit(di);
+	ab8500_fg_sysfs_psy_remove_attrs(di);
 
-	power_supply_unregister(di->fg_psy);
-free_inst_curr_wq:
-	destroy_workqueue(di->fg_wq);
 	return ret;
 }
 
@@ -3213,7 +3219,7 @@ static const struct of_device_id ab8500_fg_match[] = {
 	{ },
 };
 
-static struct platform_driver ab8500_fg_driver = {
+struct platform_driver ab8500_fg_driver = {
 	.probe = ab8500_fg_probe,
 	.remove = ab8500_fg_remove,
 	.driver = {
@@ -3222,20 +3228,6 @@ static struct platform_driver ab8500_fg_driver = {
 		.pm = &ab8500_fg_pm_ops,
 	},
 };
-
-static int __init ab8500_fg_init(void)
-{
-	return platform_driver_register(&ab8500_fg_driver);
-}
-
-static void __exit ab8500_fg_exit(void)
-{
-	platform_driver_unregister(&ab8500_fg_driver);
-}
-
-subsys_initcall_sync(ab8500_fg_init);
-module_exit(ab8500_fg_exit);
-
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
 MODULE_ALIAS("platform:ab8500-fg");
diff --git a/drivers/power/supply/abx500_chargalg.c b/drivers/power/supply/abx500_chargalg.c
index f5b792243727..599684ce0e4b 100644
--- a/drivers/power/supply/abx500_chargalg.c
+++ b/drivers/power/supply/abx500_chargalg.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/component.h>
 #include <linux/hrtimer.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
@@ -1943,13 +1944,44 @@ static int __maybe_unused abx500_chargalg_suspend(struct device *dev)
 	return 0;
 }
 
-static int abx500_chargalg_remove(struct platform_device *pdev)
+static char *supply_interface[] = {
+	"ab8500_fg",
+};
+
+static const struct power_supply_desc abx500_chargalg_desc = {
+	.name			= "abx500_chargalg",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= abx500_chargalg_props,
+	.num_properties		= ARRAY_SIZE(abx500_chargalg_props),
+	.get_property		= abx500_chargalg_get_property,
+	.external_power_changed	= abx500_chargalg_external_power_changed,
+};
+
+static int abx500_chargalg_bind(struct device *dev, struct device *master,
+				void *data)
 {
-	struct abx500_chargalg *di = platform_get_drvdata(pdev);
+	struct abx500_chargalg *di = dev_get_drvdata(dev);
 
-	/* sysfs interface to enable/disbale charging from user space */
-	abx500_chargalg_sysfs_exit(di);
+	/* Create a work queue for the chargalg */
+	di->chargalg_wq = alloc_ordered_workqueue("abx500_chargalg_wq",
+						  WQ_MEM_RECLAIM);
+	if (di->chargalg_wq == NULL) {
+		dev_err(di->dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Run the charging algorithm */
+	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
+
+	return 0;
+}
 
+static void abx500_chargalg_unbind(struct device *dev, struct device *master,
+				   void *data)
+{
+	struct abx500_chargalg *di = dev_get_drvdata(dev);
+
+	/* Stop all timers and work */
 	hrtimer_cancel(&di->safety_timer);
 	hrtimer_cancel(&di->maintenance_timer);
 
@@ -1959,48 +1991,36 @@ static int abx500_chargalg_remove(struct platform_device *pdev)
 
 	/* Delete the work queue */
 	destroy_workqueue(di->chargalg_wq);
-
-	power_supply_unregister(di->chargalg_psy);
-
-	return 0;
+	flush_scheduled_work();
 }
 
-static char *supply_interface[] = {
-	"ab8500_fg",
-};
-
-static const struct power_supply_desc abx500_chargalg_desc = {
-	.name			= "abx500_chargalg",
-	.type			= POWER_SUPPLY_TYPE_BATTERY,
-	.properties		= abx500_chargalg_props,
-	.num_properties		= ARRAY_SIZE(abx500_chargalg_props),
-	.get_property		= abx500_chargalg_get_property,
-	.external_power_changed	= abx500_chargalg_external_power_changed,
+static const struct component_ops abx500_chargalg_component_ops = {
+	.bind = abx500_chargalg_bind,
+	.unbind = abx500_chargalg_unbind,
 };
 
 static int abx500_chargalg_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
 	struct power_supply_config psy_cfg = {};
 	struct abx500_chargalg *di;
 	int ret = 0;
 
-	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
-	if (!di) {
-		dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__);
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
 		return -ENOMEM;
-	}
 
 	di->bm = &ab8500_bm_data;
 
-	ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+	ret = ab8500_bm_of_probe(dev, np, di->bm);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to get battery information\n");
+		dev_err(dev, "failed to get battery information\n");
 		return ret;
 	}
 
 	/* get device struct and parent */
-	di->dev = &pdev->dev;
+	di->dev = dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
 
 	psy_cfg.supplied_to = supply_interface;
@@ -2016,14 +2036,6 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
 	di->maintenance_timer.function =
 		abx500_chargalg_maintenance_timer_expired;
 
-	/* Create a work queue for the chargalg */
-	di->chargalg_wq = alloc_ordered_workqueue("abx500_chargalg_wq",
-						   WQ_MEM_RECLAIM);
-	if (di->chargalg_wq == NULL) {
-		dev_err(di->dev, "failed to create work queue\n");
-		return -ENOMEM;
-	}
-
 	/* Init work for chargalg */
 	INIT_DEFERRABLE_WORK(&di->chargalg_periodic_work,
 		abx500_chargalg_periodic_work);
@@ -2037,12 +2049,12 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
 	di->chg_info.prev_conn_chg = -1;
 
 	/* Register chargalg power supply class */
-	di->chargalg_psy = power_supply_register(di->dev, &abx500_chargalg_desc,
+	di->chargalg_psy = devm_power_supply_register(di->dev,
+						 &abx500_chargalg_desc,
 						 &psy_cfg);
 	if (IS_ERR(di->chargalg_psy)) {
 		dev_err(di->dev, "failed to register chargalg psy\n");
-		ret = PTR_ERR(di->chargalg_psy);
-		goto free_chargalg_wq;
+		return PTR_ERR(di->chargalg_psy);
 	}
 
 	platform_set_drvdata(pdev, di);
@@ -2051,21 +2063,24 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
 	ret = abx500_chargalg_sysfs_init(di);
 	if (ret) {
 		dev_err(di->dev, "failed to create sysfs entry\n");
-		goto free_psy;
+		return ret;
 	}
 	di->curr_status.curr_step = CHARGALG_CURR_STEP_HIGH;
 
-	/* Run the charging algorithm */
-	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
-
 	dev_info(di->dev, "probe success\n");
-	return ret;
+	return component_add(dev, &abx500_chargalg_component_ops);
+}
 
-free_psy:
-	power_supply_unregister(di->chargalg_psy);
-free_chargalg_wq:
-	destroy_workqueue(di->chargalg_wq);
-	return ret;
+static int abx500_chargalg_remove(struct platform_device *pdev)
+{
+	struct abx500_chargalg *di = platform_get_drvdata(pdev);
+
+	component_del(&pdev->dev, &abx500_chargalg_component_ops);
+
+	/* sysfs interface to enable/disable charging from user space */
+	abx500_chargalg_sysfs_exit(di);
+
+	return 0;
 }
 
 static SIMPLE_DEV_PM_OPS(abx500_chargalg_pm_ops, abx500_chargalg_suspend, abx500_chargalg_resume);
@@ -2075,7 +2090,7 @@ static const struct of_device_id ab8500_chargalg_match[] = {
 	{ },
 };
 
-static struct platform_driver abx500_chargalg_driver = {
+struct platform_driver abx500_chargalg_driver = {
 	.probe = abx500_chargalg_probe,
 	.remove = abx500_chargalg_remove,
 	.driver = {
@@ -2084,9 +2099,6 @@ static struct platform_driver abx500_chargalg_driver = {
 		.pm = &abx500_chargalg_pm_ops,
 	},
 };
-
-module_platform_driver(abx500_chargalg_driver);
-
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
 MODULE_ALIAS("platform:abx500-chargalg");
-- 
2.30.2

[PATCH AUTOSEL 5.13 07/53] power: supply: ab8500: Avoid NULL pointers

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 5bcb5087c9dd3dca1ff0ebd8002c5313c9332b56 ]

Sometimes the code will crash because we haven't enabled
AC or USB charging and thus not created the corresponding
psy device. Fix it by checking that it is there before
notifying.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/ab8500_charger.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index af32cfae9f19..57fbfe3d8c03 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -415,6 +415,14 @@ static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
 static void ab8500_power_supply_changed(struct ab8500_charger *di,
 					struct power_supply *psy)
 {
+	/*
+	 * This happens if we get notifications or interrupts and
+	 * the platform has been configured not to support one or
+	 * other type of charging.
+	 */
+	if (!psy)
+		return;
+
 	if (di->autopower_cfg) {
 		if (!di->usb.charger_connected &&
 		    !di->ac.charger_connected &&
@@ -441,7 +449,15 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
 		if (!connected)
 			di->flags.vbus_drop_end = false;
 
-		sysfs_notify(&di->usb_chg.psy->dev.kobj, NULL, "present");
+		/*
+		 * Sometimes the platform is configured not to support
+		 * USB charging and no psy has been created, but we still
+		 * will get these notifications.
+		 */
+		if (di->usb_chg.psy) {
+			sysfs_notify(&di->usb_chg.psy->dev.kobj, NULL,
+				     "present");
+		}
 
 		if (connected) {
 			mutex_lock(&di->charger_attached_mutex);
-- 
2.30.2

[PATCH AUTOSEL 5.13 08/53] power: supply: ab8500: Enable USB and AC

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit f9184a228d7a60ad56b810d549a7debb355f1be6 ]

The vendor code tree supplies platform data to enable he
USB charging for AB8500 and AB8500 and disable the AC
charging on the AB8505. This was missed when the driver
was submitted to the mainline kernel.

Fix this by doing what the vendor kernel does: always
register the USB charger, do not register the AC charger
on the AB8505.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/ab8500-bm.h      |  2 --
 drivers/power/supply/ab8500_charger.c | 24 ++++++++++++++----------
 2 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/power/supply/ab8500-bm.h b/drivers/power/supply/ab8500-bm.h
index 012595a9d269..871bdc1f5cbd 100644
--- a/drivers/power/supply/ab8500-bm.h
+++ b/drivers/power/supply/ab8500-bm.h
@@ -507,8 +507,6 @@ struct abx500_bm_data {
 	int bkup_bat_v;
 	int bkup_bat_i;
 	bool autopower_cfg;
-	bool ac_enabled;
-	bool usb_enabled;
 	bool no_maintenance;
 	bool capacity_scaling;
 	bool chg_unknown_bat;
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index 57fbfe3d8c03..e6f23ae05f95 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -3511,7 +3511,14 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	di->ac_chg.max_out_curr =
 		di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1];
 	di->ac_chg.wdt_refresh = CHG_WD_INTERVAL;
-	di->ac_chg.enabled = di->bm->ac_enabled;
+	/*
+	 * The AB8505 only supports USB charging. If we are not the
+	 * AB8505, register an AC charger.
+	 *
+	 * TODO: if this should be opt-in, add DT properties for this.
+	 */
+	if (!is_ab8505(di->parent))
+		di->ac_chg.enabled = true;
 	di->ac_chg.external = false;
 
 	/* USB supply */
@@ -3525,7 +3532,6 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	di->usb_chg.max_out_curr =
 		di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1];
 	di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
-	di->usb_chg.enabled = di->bm->usb_enabled;
 	di->usb_chg.external = false;
 	di->usb_state.usb_current = -1;
 
@@ -3599,14 +3605,12 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	}
 
 	/* Register USB charger class */
-	if (di->usb_chg.enabled) {
-		di->usb_chg.psy = devm_power_supply_register(dev,
-							&ab8500_usb_chg_desc,
-							&usb_psy_cfg);
-		if (IS_ERR(di->usb_chg.psy)) {
-			dev_err(dev, "failed to register USB charger\n");
-			return PTR_ERR(di->usb_chg.psy);
-		}
+	di->usb_chg.psy = devm_power_supply_register(dev,
+						     &ab8500_usb_chg_desc,
+						     &usb_psy_cfg);
+	if (IS_ERR(di->usb_chg.psy)) {
+		dev_err(dev, "failed to register USB charger\n");
+		return PTR_ERR(di->usb_chg.psy);
 	}
 
 	/* Identify the connected charger types during startup */
-- 
2.30.2

[PATCH AUTOSEL 5.13 09/53] PCI: hv: Fix a race condition when removing the device

[Sasha Levin]

From: Long Li <longli@microsoft.com>

[ Upstream commit 94d22763207ac6633612b8d8e0ca4fba0f7aa139 ]

On removing the device, any work item (hv_pci_devices_present() or
hv_pci_eject_device()) scheduled on workqueue hbus->wq may still be running
and race with hv_pci_remove().

This can happen because the host may send PCI_EJECT or PCI_BUS_RELATIONS(2)
and decide to rescind the channel immediately after that.

Fix this by flushing/destroying the workqueue of hbus before doing hbus remove.

Link: https://lore.kernel.org/r/1620806800-30983-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-hyperv.c | 30 ++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 6511648271b2..272c63ac49f9 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -444,7 +444,6 @@ enum hv_pcibus_state {
 	hv_pcibus_probed,
 	hv_pcibus_installed,
 	hv_pcibus_removing,
-	hv_pcibus_removed,
 	hv_pcibus_maximum
 };
 
@@ -3243,8 +3242,9 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs)
 		struct pci_packet teardown_packet;
 		u8 buffer[sizeof(struct pci_message)];
 	} pkt;
-	struct hv_dr_state *dr;
 	struct hv_pci_compl comp_pkt;
+	struct hv_pci_dev *hpdev, *tmp;
+	unsigned long flags;
 	int ret;
 
 	/*
@@ -3256,9 +3256,16 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs)
 
 	if (!keep_devs) {
 		/* Delete any children which might still exist. */
-		dr = kzalloc(sizeof(*dr), GFP_KERNEL);
-		if (dr && hv_pci_start_relations_work(hbus, dr))
-			kfree(dr);
+		spin_lock_irqsave(&hbus->device_list_lock, flags);
+		list_for_each_entry_safe(hpdev, tmp, &hbus->children, list_entry) {
+			list_del(&hpdev->list_entry);
+			if (hpdev->pci_slot)
+				pci_destroy_slot(hpdev->pci_slot);
+			/* For the two refs got in new_pcichild_device() */
+			put_pcichild(hpdev);
+			put_pcichild(hpdev);
+		}
+		spin_unlock_irqrestore(&hbus->device_list_lock, flags);
 	}
 
 	ret = hv_send_resources_released(hdev);
@@ -3301,13 +3308,23 @@ static int hv_pci_remove(struct hv_device *hdev)
 
 	hbus = hv_get_drvdata(hdev);
 	if (hbus->state == hv_pcibus_installed) {
+		tasklet_disable(&hdev->channel->callback_event);
+		hbus->state = hv_pcibus_removing;
+		tasklet_enable(&hdev->channel->callback_event);
+		destroy_workqueue(hbus->wq);
+		hbus->wq = NULL;
+		/*
+		 * At this point, no work is running or can be scheduled
+		 * on hbus-wq. We can't race with hv_pci_devices_present()
+		 * or hv_pci_eject_device(), it's safe to proceed.
+		 */
+
 		/* Remove the bus from PCI's point of view. */
 		pci_lock_rescan_remove();
 		pci_stop_root_bus(hbus->pci_bus);
 		hv_pci_remove_slots(hbus);
 		pci_remove_root_bus(hbus->pci_bus);
 		pci_unlock_rescan_remove();
-		hbus->state = hv_pcibus_removed;
 	}
 
 	ret = hv_pci_bus_exit(hdev, false);
@@ -3322,7 +3339,6 @@ static int hv_pci_remove(struct hv_device *hdev)
 	irq_domain_free_fwnode(hbus->sysdata.fwnode);
 	put_hvpcibus(hbus);
 	wait_for_completion(&hbus->remove_event);
-	destroy_workqueue(hbus->wq);
 
 	hv_put_dom_num(hbus->sysdata.domain);
 
-- 
2.30.2

[PATCH AUTOSEL 5.13 10/53] pwm: pca9685: Restrict period change for enabled PWMs

[Sasha Levin]

From: Clemens Gruber <clemens.gruber@pqgruber.com>

[ Upstream commit 6d6e7050276d40b5de97aa950d5d71057f2e2a25 ]

Previously, the last used PWM channel could change the global prescale
setting, even if other channels are already in use.

Fix it by only allowing the first enabled PWM to change the global
chip-wide prescale setting. If there is more than one channel in use,
the prescale settings resulting from the chosen periods must match.

GPIOs do not count as enabled PWMs as they are not using the prescaler
and can't change it.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-pca9685.c | 74 +++++++++++++++++++++++++++++++++------
 1 file changed, 64 insertions(+), 10 deletions(-)

diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 7c9f174de64e..ec9f93006654 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -23,11 +23,11 @@
 #include <linux/bitmap.h>
 
 /*
- * Because the PCA9685 has only one prescaler per chip, changing the period of
- * one channel affects the period of all 16 PWM outputs!
- * However, the ratio between each configured duty cycle and the chip-wide
- * period remains constant, because the OFF time is set in proportion to the
- * counter range.
+ * Because the PCA9685 has only one prescaler per chip, only the first channel
+ * that is enabled is allowed to change the prescale register.
+ * PWM channels requested afterwards must use a period that results in the same
+ * prescale setting as the one set by the first requested channel.
+ * GPIOs do not count as enabled PWMs as they are not using the prescaler.
  */
 
 #define PCA9685_MODE1		0x00
@@ -78,8 +78,9 @@
 struct pca9685 {
 	struct pwm_chip chip;
 	struct regmap *regmap;
-#if IS_ENABLED(CONFIG_GPIOLIB)
 	struct mutex lock;
+	DECLARE_BITMAP(pwms_enabled, PCA9685_MAXCHAN + 1);
+#if IS_ENABLED(CONFIG_GPIOLIB)
 	struct gpio_chip gpio;
 	DECLARE_BITMAP(pwms_inuse, PCA9685_MAXCHAN + 1);
 #endif
@@ -90,6 +91,22 @@ static inline struct pca9685 *to_pca(struct pwm_chip *chip)
 	return container_of(chip, struct pca9685, chip);
 }
 
+/* This function is supposed to be called with the lock mutex held */
+static bool pca9685_prescaler_can_change(struct pca9685 *pca, int channel)
+{
+	/* No PWM enabled: Change allowed */
+	if (bitmap_empty(pca->pwms_enabled, PCA9685_MAXCHAN + 1))
+		return true;
+	/* More than one PWM enabled: Change not allowed */
+	if (bitmap_weight(pca->pwms_enabled, PCA9685_MAXCHAN + 1) > 1)
+		return false;
+	/*
+	 * Only one PWM enabled: Change allowed if the PWM about to
+	 * be changed is the one that is already enabled
+	 */
+	return test_bit(channel, pca->pwms_enabled);
+}
+
 /* Helper function to set the duty cycle ratio to duty/4096 (e.g. duty=2048 -> 50%) */
 static void pca9685_pwm_set_duty(struct pca9685 *pca, int channel, unsigned int duty)
 {
@@ -240,8 +257,6 @@ static int pca9685_pwm_gpio_probe(struct pca9685 *pca)
 {
 	struct device *dev = pca->chip.dev;
 
-	mutex_init(&pca->lock);
-
 	pca->gpio.label = dev_name(dev);
 	pca->gpio.parent = dev;
 	pca->gpio.request = pca9685_pwm_gpio_request;
@@ -285,8 +300,8 @@ static void pca9685_set_sleep_mode(struct pca9685 *pca, bool enable)
 	}
 }
 
-static int pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
-			     const struct pwm_state *state)
+static int __pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			       const struct pwm_state *state)
 {
 	struct pca9685 *pca = to_pca(chip);
 	unsigned long long duty, prescale;
@@ -309,6 +324,12 @@ static int pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	regmap_read(pca->regmap, PCA9685_PRESCALE, &val);
 	if (prescale != val) {
+		if (!pca9685_prescaler_can_change(pca, pwm->hwpwm)) {
+			dev_err(chip->dev,
+				"pwm not changed: periods of enabled pwms must match!\n");
+			return -EBUSY;
+		}
+
 		/*
 		 * Putting the chip briefly into SLEEP mode
 		 * at this point won't interfere with the
@@ -331,6 +352,25 @@ static int pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
+static int pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct pca9685 *pca = to_pca(chip);
+	int ret;
+
+	mutex_lock(&pca->lock);
+	ret = __pca9685_pwm_apply(chip, pwm, state);
+	if (ret == 0) {
+		if (state->enabled)
+			set_bit(pwm->hwpwm, pca->pwms_enabled);
+		else
+			clear_bit(pwm->hwpwm, pca->pwms_enabled);
+	}
+	mutex_unlock(&pca->lock);
+
+	return ret;
+}
+
 static void pca9685_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 				  struct pwm_state *state)
 {
@@ -372,6 +412,14 @@ static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 
 	if (pca9685_pwm_test_and_set_inuse(pca, pwm->hwpwm))
 		return -EBUSY;
+
+	if (pwm->hwpwm < PCA9685_MAXCHAN) {
+		/* PWMs - except the "all LEDs" channel - default to enabled */
+		mutex_lock(&pca->lock);
+		set_bit(pwm->hwpwm, pca->pwms_enabled);
+		mutex_unlock(&pca->lock);
+	}
+
 	pm_runtime_get_sync(chip->dev);
 
 	return 0;
@@ -381,7 +429,11 @@ static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct pca9685 *pca = to_pca(chip);
 
+	mutex_lock(&pca->lock);
 	pca9685_pwm_set_duty(pca, pwm->hwpwm, 0);
+	clear_bit(pwm->hwpwm, pca->pwms_enabled);
+	mutex_unlock(&pca->lock);
+
 	pm_runtime_put(chip->dev);
 	pca9685_pwm_clear_inuse(pca, pwm->hwpwm);
 }
@@ -422,6 +474,8 @@ static int pca9685_pwm_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, pca);
 
+	mutex_init(&pca->lock);
+
 	regmap_read(pca->regmap, PCA9685_MODE2, &reg);
 
 	if (device_property_read_bool(&client->dev, "invert"))
-- 
2.30.2

[PATCH AUTOSEL 5.13 11/53] power: supply: max17042: Do not enforce (incorrect) interrupt trigger type

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 7fbf6b731bca347700e460d94b130f9d734b33e9 ]

Interrupt line can be configured on different hardware in different way,
even inverted.  Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.

The Maxim 17047/77693 datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.

The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races.  With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/max17042_battery.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index 1d7326cd8fc6..ce2041b30a06 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -1104,7 +1104,7 @@ static int max17042_probe(struct i2c_client *client,
 	}
 
 	if (client->irq) {
-		unsigned int flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+		unsigned int flags = IRQF_ONESHOT;
 
 		/*
 		 * On ACPI systems the IRQ may be handled by ACPI-event code,
-- 
2.30.2