linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <mani@kernel.org>
To: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: "Rob Herring" <robh@kernel.org>,
	linuxarm@huawei.com, mauro.chehab@huawei.com,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Binghui Wang" <wangbinghui@hisilicon.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Xiaowei Song" <songxiaowei@hisilicon.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-phy@lists.infradead.org
Subject: Re: [PATCH v3 8/9] phy: hisilicon: add driver for Kirin 970 PCIe PHY
Date: Mon, 12 Jul 2021 13:46:34 +0530	[thread overview]
Message-ID: <20210712081634.GB8113@workstation> (raw)
In-Reply-To: <1b010af75ee5ac0f2b03bd513a60bf8198afad74.1625826353.git.mchehab+huawei@kernel.org>

On Fri, Jul 09, 2021 at 12:41:44PM +0200, Mauro Carvalho Chehab wrote:
> The Kirin 970 PHY is somewhat similar to the Kirin 960, but it
> does a lot more. Add the needed bits for PCIe to start working on
> Hikey 970 boards.
> 
> Co-developed-by: Manivannan Sadhasivam <mani@kernel.org>

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>

Thanks,
Mani

> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../devicetree/bindings/pci/kirin-pcie.txt    |   1 +
>  drivers/pci/controller/dwc/pcie-kirin.c       |   1 +
>  drivers/phy/hisilicon/Kconfig                 |  10 +
>  drivers/phy/hisilicon/Makefile                |   1 +
>  drivers/phy/hisilicon/phy-hi3670-pcie.c       | 892 ++++++++++++++++++
>  5 files changed, 905 insertions(+)
>  create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c
> 
> diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> index a93a8cfa1afb..585aadfeafd1 100644
> --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> @@ -10,6 +10,7 @@ Additional properties are described here:
>  Required properties
>  - compatible:
>  	"hisilicon,kirin960-pcie"
> +	"hisilicon,kirin970-pcie"
>  - reg: Should contain rc_dbi, apb, config registers location and length.
>  - reg-names: Must include the following entries:
>    "dbi": controller configuration registers;
> diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
> index 78271dddf2e8..c51745f9b56b 100644
> --- a/drivers/pci/controller/dwc/pcie-kirin.c
> +++ b/drivers/pci/controller/dwc/pcie-kirin.c
> @@ -280,6 +280,7 @@ static int __exit kirin_pcie_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id kirin_pcie_match[] = {
>  	{ .compatible = "hisilicon,kirin960-pcie" },
> +	{ .compatible = "hisilicon,kirin970-pcie" },
>  	{},
>  };
>  
> diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
> index c0725907e2cb..e52d54b0c9d6 100644
> --- a/drivers/phy/hisilicon/Kconfig
> +++ b/drivers/phy/hisilicon/Kconfig
> @@ -43,6 +43,16 @@ config PHY_HI3670_USB
>  
>  	  To compile this driver as a module, choose M here.
>  
> +config PHY_HI3670_PCIE
> +	tristate "hi3670 PCIe PHY support"
> +	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> +	select GENERIC_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the HISILICON HI3670 PCIe PHY.
> +
> +	  To compile this driver as a module, choose M here.
> +
>  config PHY_HISTB_COMBPHY
>  	tristate "HiSilicon STB SoCs COMBPHY support"
>  	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
> index 3c3d70dd7469..2670f2f382e1 100644
> --- a/drivers/phy/hisilicon/Makefile
> +++ b/drivers/phy/hisilicon/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
>  obj-$(CONFIG_PHY_HI3660_USB)		+= phy-hi3660-usb3.o
>  obj-$(CONFIG_PHY_HI3660_PCIE)		+= phy-hi3660-pcie.o
>  obj-$(CONFIG_PHY_HI3670_USB)		+= phy-hi3670-usb3.o
> +obj-$(CONFIG_PHY_HI3670_PCIE)		+= phy-hi3670-pcie.o
>  obj-$(CONFIG_PHY_HISTB_COMBPHY)		+= phy-histb-combphy.o
>  obj-$(CONFIG_PHY_HISI_INNO_USB2)	+= phy-hisi-inno-usb2.o
>  obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
> diff --git a/drivers/phy/hisilicon/phy-hi3670-pcie.c b/drivers/phy/hisilicon/phy-hi3670-pcie.c
> new file mode 100644
> index 000000000000..dcbf7d47d8e7
> --- /dev/null
> +++ b/drivers/phy/hisilicon/phy-hi3670-pcie.c
> @@ -0,0 +1,892 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe phy driver for Kirin 970
> + *
> + * Copyright (C) 2017 HiSilicon Electronics Co., Ltd.
> + *		https://www.huawei.com
> + * Copyright (C) 2021 Huawei Technologies Co., Ltd.
> + *		https://www.huawei.com
> + *
> + * Authors:
> + *	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> + *	Manivannan Sadhasivam <mani@kernel.org>
> + *
> + * Based on:
> + * 	https://lore.kernel.org/lkml/4c9d6581478aa966698758c0420933f5defab4dd.1612335031.git.mchehab+huawei@kernel.org/
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/gpio.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define AXI_CLK_FREQ			207500000
> +#define REF_CLK_FREQ			100000000
> +
> +/* PCIe CTRL registers */
> +#define SOC_PCIECTRL_CTRL0_ADDR   0x000
> +#define SOC_PCIECTRL_CTRL1_ADDR   0x004
> +#define SOC_PCIECTRL_CTRL7_ADDR   0x01c
> +#define SOC_PCIECTRL_CTRL12_ADDR  0x030
> +#define SOC_PCIECTRL_CTRL20_ADDR  0x050
> +#define SOC_PCIECTRL_CTRL21_ADDR  0x054
> +#define SOC_PCIECTRL_STATE0_ADDR  0x400
> +
> +/* PCIe PHY registers */
> +#define SOC_PCIEPHY_CTRL0_ADDR    0x000
> +#define SOC_PCIEPHY_CTRL1_ADDR    0x004
> +#define SOC_PCIEPHY_CTRL2_ADDR    0x008
> +#define SOC_PCIEPHY_CTRL3_ADDR    0x00c
> +#define SOC_PCIEPHY_CTRL38_ADDR   0x0098
> +#define SOC_PCIEPHY_STATE0_ADDR   0x400
> +
> +#define PCIE_LINKUP_ENABLE            (0x8020)
> +#define PCIE_ELBI_SLV_DBI_ENABLE      (0x1 << 21)
> +#define PCIE_LTSSM_ENABLE_BIT         (0x1 << 11)
> +#define PCIEPHY_RESET_BIT             (0x1 << 17)
> +#define PCIEPHY_PIPE_LINE0_RESET_BIT  (0x1 << 19)
> +
> +#define PORT_MSI_CTRL_ADDR            0x820
> +#define PORT_MSI_CTRL_UPPER_ADDR      0x824
> +#define PORT_MSI_CTRL_INT0_ENABLE     0x828
> +
> +#define EYEPARAM_NOCFG 0xFFFFFFFF
> +#define RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1 0x3001
> +#define SUP_DIG_LVL_OVRD_IN 0xf
> +#define LANEN_DIG_ASIC_TX_OVRD_IN_1 0x1002
> +#define LANEN_DIG_ASIC_TX_OVRD_IN_2 0x1003
> +
> +/* hi3670 pciephy register */
> +#define SOC_PCIEPHY_MMC1PLL_CTRL1  0xc04
> +#define SOC_PCIEPHY_MMC1PLL_CTRL16 0xC40
> +#define SOC_PCIEPHY_MMC1PLL_CTRL17 0xC44
> +#define SOC_PCIEPHY_MMC1PLL_CTRL20 0xC50
> +#define SOC_PCIEPHY_MMC1PLL_CTRL21 0xC54
> +#define SOC_PCIEPHY_MMC1PLL_STAT0  0xE00
> +
> +#define CRGPERIPH_PEREN12   0x470
> +#define CRGPERIPH_PERDIS12  0x474
> +#define CRGPERIPH_PCIECTRL0 0x800
> +
> +/* define ie,oe cfg */
> +#define IO_IE_EN_HARD_BYPASS         (0x1 << 27)
> +#define IO_OE_EN_HARD_BYPASS         (0x1 << 11)
> +#define IO_HARD_CTRL_DEBOUNCE_BYPASS (0x1 << 10)
> +#define IO_OE_GT_MODE                (0x2 << 7)
> +#define DEBOUNCE_WAITCFG_IN          (0xf << 20)
> +#define DEBOUNCE_WAITCFG_OUT         (0xf << 13)
> +
> +/* noc power domain */
> +#define NOC_POWER_IDLEREQ_1 0x38c
> +#define NOC_POWER_IDLE_1    0x394
> +#define NOC_PW_MASK         0x10000
> +#define NOC_PW_SET_BIT      0x1
> +
> +/* Number of GPIOs required by PHY */
> +#define MAX_GPIO_RESETS		4
> +#define MAX_GPIO_CLKREQ		3
> +#define NUM_EYEPARAM		5
> +
> +/* info located in sysctrl */
> +#define SCTRL_PCIE_CMOS_OFFSET	0x60
> +#define SCTRL_PCIE_CMOS_BIT	0x10
> +#define SCTRL_PCIE_ISO_OFFSET	0x44
> +#define SCTRL_PCIE_ISO_BIT	0x30
> +#define SCTRL_PCIE_HPCLK_OFFSET	0x190
> +#define SCTRL_PCIE_HPCLK_BIT	0x184000
> +#define SCTRL_PCIE_OE_OFFSET	0x14a
> +#define PCIE_DEBOUNCE_PARAM	0xF0F400
> +#define PCIE_OE_BYPASS		(0x3 << 28)
> +
> +/* peri_crg ctrl */
> +#define CRGCTRL_PCIE_ASSERT_OFFSET	0x88
> +#define CRGCTRL_PCIE_ASSERT_BIT		0x8c000000
> +
> +/* Time for delay */
> +#define REF_2_PERST_MIN		20000
> +#define REF_2_PERST_MAX		25000
> +#define PERST_2_ACCESS_MIN	10000
> +#define PERST_2_ACCESS_MAX	12000
> +#define PIPE_CLK_WAIT_MIN	550
> +#define PIPE_CLK_WAIT_MAX	600
> +#define TIME_CMOS_MIN		100
> +#define TIME_CMOS_MAX		105
> +#define TIME_PHY_PD_MIN		10
> +#define TIME_PHY_PD_MAX		11
> +
> +struct hi3670_pcie_phy {
> +	struct device	*dev;
> +	void __iomem	*base;
> +	struct regmap	*apb;
> +	struct regmap	*crgctrl;
> +	struct regmap	*sysctrl;
> +	struct regmap	*pmctrl;
> +	struct clk	*apb_sys_clk;
> +	struct clk	*apb_phy_clk;
> +	struct clk	*phy_ref_clk;
> +	struct clk	*pcie_aclk;
> +	struct clk	*pcie_aux_clk;
> +	int		n_gpio_resets;
> +	int		n_gpio_clkreq;
> +	int		gpio_id_reset[MAX_GPIO_RESETS];
> +	const char	*reset_names[MAX_GPIO_RESETS];
> +	int		gpio_id_clkreq[MAX_GPIO_CLKREQ];
> +	const char	*clkreq_names[MAX_GPIO_CLKREQ];
> +	u32		eye_param[NUM_EYEPARAM];
> +};
> +
> +
> +/* Registers in PCIePHY */
> +static inline void hi3670_apb_phy_writel(struct hi3670_pcie_phy *phy,
> +					 u32 val, u32 reg)
> +{
> +	writel(val, phy->base + 0x40000 + reg);
> +}
> +
> +static inline u32 hi3670_apb_phy_readl(struct hi3670_pcie_phy *phy, u32 reg)
> +{
> +	return readl(phy->base + 0x40000 + reg);
> +}
> +
> +static inline void kirin_apb_natural_phy_writel(struct hi3670_pcie_phy *phy,
> +						u32 val, u32 reg)
> +{
> +	writel(val, phy->base + reg * 4);
> +}
> +
> +static inline u32 kirin_apb_natural_phy_readl(struct hi3670_pcie_phy *phy,
> +					      u32 reg)
> +{
> +	return readl(phy->base + reg * 4);
> +}
> +
> +static void hi3670_pcie_phy_oe_enable(struct hi3670_pcie_phy *phy)
> +{
> +	u32 val;
> +
> +	regmap_read(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, &val);
> +	val |= PCIE_DEBOUNCE_PARAM;
> +	val &= ~PCIE_OE_BYPASS;
> +	regmap_write(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, val);
> +}
> +
> +void hi3670_pcie_get_eyeparam(struct hi3670_pcie_phy *phy)
> +{
> +	struct device *dev = phy->dev;
> +	struct device_node *np;
> +	int ret, i;
> +
> +	np = dev->of_node;
> +
> +	ret = of_property_read_u32_array(np, "hisilicon,eye-diagram-param",
> +					 phy->eye_param, NUM_EYEPARAM);
> +	if (!ret)
> +		return;
> +
> +	/* There's no optional eye_param property. Set array to default */
> +	for (i = 0; i < NUM_EYEPARAM; i++)
> +		phy->eye_param[i] = EYEPARAM_NOCFG;
> +}
> +
> +static void hi3670_pcie_set_eyeparam(struct hi3670_pcie_phy *phy)
> +{
> +	u32 val;
> +
> +	val = kirin_apb_natural_phy_readl(phy, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
> +
> +	if (phy->eye_param[1] != EYEPARAM_NOCFG) {
> +		val &= (~0xf00);
> +		val |= (phy->eye_param[1] << 8) | (0x1 << 12);
> +	}
> +	kirin_apb_natural_phy_writel(phy, val, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
> +
> +	val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_2);
> +	val &= (~0x1FBF);
> +	if (phy->eye_param[2] != EYEPARAM_NOCFG)
> +		val |= (phy->eye_param[2]<< 0) | (0x1 << 6);
> +
> +	if (phy->eye_param[3] != EYEPARAM_NOCFG)
> +		val |= (phy->eye_param[3] << 7) | (0x1 << 13);
> +
> +	kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_2);
> +
> +	val = kirin_apb_natural_phy_readl(phy, SUP_DIG_LVL_OVRD_IN);
> +	if (phy->eye_param[0] != EYEPARAM_NOCFG) {
> +		val &= (~0x1C0);
> +		val |= (phy->eye_param[0] << 6) | (0x1 << 9);
> +	}
> +	kirin_apb_natural_phy_writel(phy, val, SUP_DIG_LVL_OVRD_IN);
> +
> +	val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_1);
> +	if (phy->eye_param[4] != EYEPARAM_NOCFG) {
> +		val &= (~0x7E00);
> +		val |= (phy->eye_param[4] << 9) | (0x1 << 15);
> +	}
> +	kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_1);
> +}
> +
> +static int hi3670_pcie_gpio_request(struct hi3670_pcie_phy *phy,
> +				    struct device *dev)
> +{
> +	int ret, i;
> +
> +	for (i = 0; i < phy->n_gpio_resets; i++) {
> +		if (!gpio_is_valid(phy->gpio_id_reset[i])) {
> +			dev_err(dev, "unable to get a valid %s gpio\n",
> +				phy->reset_names[i]);
> +			return -ENODEV;
> +		}
> +
> +		ret = devm_gpio_request(dev, phy->gpio_id_reset[i],
> +					phy->reset_names[i]);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	for (i = 0; i < phy->n_gpio_clkreq; i++) {
> +		if (!gpio_is_valid(phy->gpio_id_clkreq[i])) {
> +			dev_err(dev, "unable to get a valid %s gpio\n",
> +				phy->clkreq_names[i]);
> +			return -ENODEV;
> +		}
> +
> +		ret = devm_gpio_request(dev, phy->gpio_id_clkreq[i],
> +					phy->clkreq_names[i]);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static void hi3670_pcie_natural_cfg(struct hi3670_pcie_phy *phy)
> +{
> +	u32 val;
> +
> +	/* change 2p mem_ctrl */
> +	regmap_write(phy->apb, SOC_PCIECTRL_CTRL20_ADDR, 0x02605550);
> +
> +	/* pull up sys_aux_pwr_det */
> +	regmap_read(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, &val);
> +	val |= (0x1 << 10);
> +	regmap_write(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, val);
> +
> +	/* output, pull down */
> +	regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
> +	val &= ~(0x3 << 2);
> +	val |= (0x1 << 1);
> +	val &= ~(0x1 << 0);
> +	regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
> +
> +	/* Handle phy_reset and lane0_reset to HW */
> +	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
> +	val |= PCIEPHY_RESET_BIT;
> +	val &= ~PCIEPHY_PIPE_LINE0_RESET_BIT;
> +	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
> +
> +	/* fix chip bug: TxDetectRx fail */
> +	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL38_ADDR);
> +	val |= (0x1 << 2);
> +	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL38_ADDR);
> +}
> +
> +static void hi3670_pcie_pll_init(struct hi3670_pcie_phy *phy)
> +{
> +	u32 val;
> +
> +	/* choose FNPLL */
> +	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL1);
> +	val |= (0x1 << 27);
> +	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL1);
> +
> +	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
> +	val &= 0xF000FFFF;
> +	/* fnpll fbdiv = 0xD0 */
> +	val |= (0xd0 << 16);
> +	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
> +
> +	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL17);
> +	val &= 0xFF000000;
> +	/* fnpll fracdiv = 0x555555 */
> +	val |= (0x555555 << 0);
> +	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL17);
> +
> +	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
> +	val &= 0xF5FF88FF;
> +	/* fnpll dll_en = 0x1 */
> +	val |= (0x1 << 27);
> +	/* fnpll postdiv1 = 0x5 */
> +	val |= (0x5 << 8);
> +	/* fnpll postdiv2 = 0x4 */
> +	val |= (0x4 << 12);
> +	/* fnpll pll_mode = 0x0 */
> +	val &= ~(0x1 << 25);
> +	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
> +
> +	hi3670_apb_phy_writel(phy, 0x20, SOC_PCIEPHY_MMC1PLL_CTRL21);
> +}
> +
> +static int hi3670_pcie_pll_ctrl(struct hi3670_pcie_phy *phy, bool enable)
> +{
> +	struct device *dev = phy->dev;
> +	u32 val;
> +	int time = 200;
> +
> +	if (enable) {
> +		/* pd = 0 */
> +		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
> +		val &= ~(0x1 << 0);
> +		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
> +
> +		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
> +
> +		/* choose FNPLL */
> +		while (!(val & 0x10)) {
> +			if (!time) {
> +				dev_err(dev, "wait for pll_lock timeout\n");
> +				return -1;
> +			}
> +			time --;
> +			udelay(1);
> +			val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
> +		}
> +
> +		/* pciepll_bp = 0 */
> +		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
> +		val &= ~(0x1 << 16);
> +		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
> +
> +	} else {
> +		/* pd = 1 */
> +		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
> +		val |= (0x1 << 0);
> +		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
> +
> +		/* pciepll_bp = 1 */
> +		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
> +		val |= (0x1 << 16);
> +		hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
> +	}
> +
> +	 return 0;
> +}
> +
> +static void hi3670_pcie_hp_debounce_gt(struct hi3670_pcie_phy *phy, bool open)
> +{
> +	if (open)
> +		/* gt_clk_pcie_hp/gt_clk_pcie_debounce open */
> +		regmap_write(phy->crgctrl, CRGPERIPH_PEREN12, 0x9000);
> +	else
> +		/* gt_clk_pcie_hp/gt_clk_pcie_debounce close */
> +		regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x9000);
> +}
> +
> +static void hi3670_pcie_phyref_gt(struct hi3670_pcie_phy *phy, bool open)
> +{
> +	unsigned int val;
> +
> +	regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
> +
> +	if (open)
> +		val &= ~(0x1 << 1); //enable hard gt mode
> +	else
> +		val |= (0x1 << 1); //disable hard gt mode
> +
> +	regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
> +
> +	/* disable soft gt mode */
> +	regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x4000);
> +}
> +
> +static void hi3670_pcie_oe_ctrl(struct hi3670_pcie_phy *phy, bool en_flag)
> +{
> +	unsigned int val;
> +
> +	regmap_read(phy->crgctrl , CRGPERIPH_PCIECTRL0, &val);
> +
> +	/* set ie cfg */
> +	val |= IO_IE_EN_HARD_BYPASS;
> +
> +	/* set oe cfg */
> +	val &= ~IO_HARD_CTRL_DEBOUNCE_BYPASS;
> +
> +	/* set phy_debounce in&out time */
> +	val |= (DEBOUNCE_WAITCFG_IN | DEBOUNCE_WAITCFG_OUT);
> +
> +	/* select oe_gt_mode */
> +	val |= IO_OE_GT_MODE;
> +
> +	if (en_flag)
> +		val &= ~IO_OE_EN_HARD_BYPASS;
> +	else
> +		val |= IO_OE_EN_HARD_BYPASS;
> +
> +	regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
> +}
> +
> +static void hi3670_pcie_ioref_gt(struct hi3670_pcie_phy *phy, bool open)
> +{
> +	unsigned int val;
> +
> +	if (open) {
> +		regmap_write(phy->apb, SOC_PCIECTRL_CTRL21_ADDR, 0x20000070);
> +
> +		hi3670_pcie_oe_ctrl(phy, true);
> +
> +		/* en hard gt mode */
> +		regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
> +		val &= ~(0x1 << 0);
> +		regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
> +
> +		/* disable soft gt mode */
> +		regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
> +
> +	} else {
> +		/* disable hard gt mode */
> +		regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
> +		val |= (0x1 << 0);
> +		regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
> +
> +		/* disable soft gt mode */
> +		regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
> +
> +		hi3670_pcie_oe_ctrl(phy, false);
> +       }
> +}
> +
> +static int hi3670_pcie_allclk_ctrl(struct hi3670_pcie_phy *phy, bool clk_on)
> +{
> +	struct device *dev = phy->dev;
> +	u32 val;
> +	int ret = 0;
> +
> +	if (!clk_on)
> +		goto close_clocks;
> +
> +	/* choose 100MHz clk src: Bit[8]==1 pad, Bit[8]==0 pll */
> +	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
> +	val &= ~(0x1 << 8);
> +	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
> +
> +	hi3670_pcie_pll_init(phy);
> +
> +	ret = hi3670_pcie_pll_ctrl(phy, true);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable pll\n");
> +		return -1;
> +	}
> +	hi3670_pcie_hp_debounce_gt(phy, true);
> +	hi3670_pcie_phyref_gt(phy, true);
> +	hi3670_pcie_ioref_gt(phy, true);
> +
> +	ret = clk_set_rate(phy->pcie_aclk, AXI_CLK_FREQ);
> +	if (ret) {
> +		dev_err(dev, "Failed to set rate\n");
> +		goto close_clocks;
> +	}
> +
> +	return 0;
> +
> +close_clocks:
> +	hi3670_pcie_ioref_gt(phy, false);
> +	hi3670_pcie_phyref_gt(phy, false);
> +	hi3670_pcie_hp_debounce_gt(phy, false);
> +
> +	hi3670_pcie_pll_ctrl(phy, false);
> +
> +	return ret;
> +}
> +
> +static bool is_pipe_clk_stable(struct hi3670_pcie_phy *phy)
> +{
> +	struct device *dev = phy->dev;
> +	u32 val;
> +	u32 time = 100;
> +	u32 pipe_clk_stable = 0x1 << 19;
> +
> +	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
> +	while (val & pipe_clk_stable) {
> +		mdelay(1);
> +		if (time == 0) {
> +			dev_err(dev, "PIPE clk is not stable\n");
> +			return false;
> +		}
> +		time--;
> +		val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
> +	}
> +
> +	return true;
> +}
> +
> +static int hi3670_pcie_noc_power(struct hi3670_pcie_phy *phy, bool enable)
> +{
> +	struct device *dev = phy->dev;
> +	u32 time = 100;
> +	unsigned int val = NOC_PW_MASK;
> +	int rst;
> +
> +	if (enable)
> +		val = NOC_PW_MASK | NOC_PW_SET_BIT;
> +	else
> +		val = NOC_PW_MASK;
> +	rst = enable ? 1 : 0;
> +
> +	regmap_write(phy->pmctrl, NOC_POWER_IDLEREQ_1, val);
> +
> +	time = 100;
> +	regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
> +	while((val & NOC_PW_SET_BIT) != rst) {
> +		udelay(10);
> +		if (!time) {
> +			dev_err(dev, "Failed to reverse noc power-status\n");
> +			return -1;
> +		}
> +		time--;
> +		regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
> +	}
> +
> +	return 0;
> +}
> +
> +static int hi3670_pcie_get_apb(struct hi3670_pcie_phy *phy)
> +{
> +	struct device_node *pcie_port;
> +	struct device *dev = phy->dev;
> +	struct device *pcie_dev;
> +
> +	pcie_port = of_get_child_by_name(dev->parent->of_node, "pcie");
> +	if (!pcie_port) {
> +		dev_err(dev, "no pcie node found in %s\n",
> +			dev->parent->of_node->full_name);
> +		return -ENODEV;
> +	}
> +
> +	pcie_dev = bus_find_device_by_of_node(&platform_bus_type, pcie_port);
> +	if (!pcie_dev) {
> +                dev_err(dev, "Didn't find pcie device\n");
> +                return -ENODEV;
> +        }
> +
> +        /*
> +	 * We might just use NULL instead of the APB name, as the
> +	 * pcie-kirin currently registers directly just one regmap (although
> +	 * the DWC driver register other regmaps).
> +	 *
> +	 * Yet, it sounds safer to warrant that it will be accessing the
> +	 * right regmap. So, let's use the named version.
> +	 */
> +	phy->apb = dev_get_regmap(pcie_dev, "kirin_pcie_apb");
> +	if (!phy->apb) {
> +		dev_err(dev, "Failed to get APB regmap\n");
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +
> +static int kirin_pcie_clk_ctrl(struct hi3670_pcie_phy *phy, bool enable)
> +{
> +	int ret = 0;
> +
> +	if (!enable)
> +		goto close_clk;
> +
> +	ret = clk_set_rate(phy->phy_ref_clk, REF_CLK_FREQ);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_prepare_enable(phy->phy_ref_clk);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_prepare_enable(phy->apb_sys_clk);
> +	if (ret)
> +		goto apb_sys_fail;
> +
> +	ret = clk_prepare_enable(phy->apb_phy_clk);
> +	if (ret)
> +		goto apb_phy_fail;
> +
> +	ret = clk_prepare_enable(phy->pcie_aclk);
> +	if (ret)
> +		goto aclk_fail;
> +
> +	ret = clk_prepare_enable(phy->pcie_aux_clk);
> +	if (ret)
> +		goto aux_clk_fail;
> +
> +	return 0;
> +
> +close_clk:
> +	clk_disable_unprepare(phy->pcie_aux_clk);
> +aux_clk_fail:
> +	clk_disable_unprepare(phy->pcie_aclk);
> +aclk_fail:
> +	clk_disable_unprepare(phy->apb_phy_clk);
> +apb_phy_fail:
> +	clk_disable_unprepare(phy->apb_sys_clk);
> +apb_sys_fail:
> +	clk_disable_unprepare(phy->phy_ref_clk);
> +
> +	return ret;
> +}
> +
> +static int hi3670_pcie_phy_init(struct phy *generic_phy)
> +{
> +	struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
> +	struct device *dev = phy->dev;
> +	int ret;
> +
> +	/*
> +	 * The code under hi3670_pcie_get_apb() need to access the
> +	 * DWC APB registers. So, get them from
> +	 * the pcie driver's regmap (see pcie-kirin regmap).
> +	 *
> +	 * Such kind of resource can only be obtained during the PCIe
> +	 * power_on sequence, as the code inside pcie-kirin needs to
> +	 * be already probed, as it needs to register the APB regmap.
> +	 */
> +
> +	ret = hi3670_pcie_get_apb(phy);
> +	if (ret)
> +		return ret;
> +
> +	/* phy regulator needs to be powered on before calling it */
> +	return hi3670_pcie_gpio_request(phy, dev);
> +}
> +
> +static int hi3670_pcie_phy_power_on(struct phy *generic_phy)
> +{
> +	struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
> +	int val, ret, i;
> +
> +	/* Power supply for Host */
> +	regmap_write(phy->sysctrl,
> +		     SCTRL_PCIE_CMOS_OFFSET, SCTRL_PCIE_CMOS_BIT);
> +	usleep_range(TIME_CMOS_MIN, TIME_CMOS_MAX);
> +
> +	hi3670_pcie_phy_oe_enable(phy);
> +
> +	for (i = 0; i < phy->n_gpio_clkreq; i++) {
> +		ret = gpio_direction_output(phy->gpio_id_clkreq[i], 0);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = kirin_pcie_clk_ctrl(phy, true);
> +	if (ret)
> +		return ret;
> +
> +	/* ISO disable, PCIeCtrl, PHY assert and clk gate clear */
> +	regmap_write(phy->sysctrl,
> +		     SCTRL_PCIE_ISO_OFFSET, SCTRL_PCIE_ISO_BIT);
> +	regmap_write(phy->crgctrl,
> +		     CRGCTRL_PCIE_ASSERT_OFFSET, CRGCTRL_PCIE_ASSERT_BIT);
> +	regmap_write(phy->sysctrl,
> +		     SCTRL_PCIE_HPCLK_OFFSET, SCTRL_PCIE_HPCLK_BIT);
> +
> +	hi3670_pcie_natural_cfg(phy);
> +
> +	ret = hi3670_pcie_allclk_ctrl(phy, true);
> +	if (ret)
> +		goto disable_clks;
> +
> +	/* pull down phy_test_powerdown signal */
> +	val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL0_ADDR);
> +	val &= ~(0x1 << 22);
> +	hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL0_ADDR);
> +
> +	/* deassert controller perst_n */
> +	regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
> +	val |= (0x1 << 2);
> +	regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
> +	udelay(10);
> +
> +	/* perst assert Endpoints */
> +	usleep_range(21000, 23000);
> +	for (i = 0; i < phy->n_gpio_resets; i++) {
> +		ret = gpio_direction_output(phy->gpio_id_reset[i], 1);
> +		if (ret)
> +			return ret;
> +	}
> +	usleep_range(10000, 11000);
> +
> +	ret = is_pipe_clk_stable(phy);
> +	if (!ret)
> +		goto disable_clks;
> +
> +	hi3670_pcie_set_eyeparam(phy);
> +
> +	ret = hi3670_pcie_noc_power(phy, false);
> +	if (ret)
> +		goto disable_clks;
> +
> +	return 0;
> +
> +disable_clks:
> +	kirin_pcie_clk_ctrl(phy, false);
> +	return ret;
> +}
> +
> +static int hi3670_pcie_phy_power_off(struct phy *generic_phy)
> +{
> +	struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
> +
> +	/* Drop power supply for Host */
> +	regmap_write(phy->sysctrl, SCTRL_PCIE_CMOS_OFFSET, 0x00);
> +
> +	kirin_pcie_clk_ctrl(phy, false);
> +
> +	return 0;
> +}
> +
> +static const struct phy_ops hi3670_phy_ops = {
> +	.init		= hi3670_pcie_phy_init,
> +	.power_on	= hi3670_pcie_phy_power_on,
> +	.power_off	= hi3670_pcie_phy_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int hi3670_pcie_phy_get_resources(struct hi3670_pcie_phy *phy,
> +					 struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	char name[32];
> +	int i;
> +
> +	/* syscon */
> +	phy->crgctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-crgctrl");
> +	if (IS_ERR(phy->crgctrl))
> +		return PTR_ERR(phy->crgctrl);
> +
> +	phy->sysctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-sctrl");
> +	if (IS_ERR(phy->sysctrl))
> +		return PTR_ERR(phy->sysctrl);
> +
> +	phy->pmctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-pmctrl");
> +	if (IS_ERR(phy->sysctrl))
> +		return PTR_ERR(phy->sysctrl);
> +
> +	/* clocks */
> +	phy->phy_ref_clk = devm_clk_get(dev, "pcie_phy_ref");
> +	if (IS_ERR(phy->phy_ref_clk))
> +		return PTR_ERR(phy->phy_ref_clk);
> +
> +	phy->pcie_aux_clk = devm_clk_get(dev, "pcie_aux");
> +	if (IS_ERR(phy->pcie_aux_clk))
> +		return PTR_ERR(phy->pcie_aux_clk);
> +
> +	phy->apb_phy_clk = devm_clk_get(dev, "pcie_apb_phy");
> +	if (IS_ERR(phy->apb_phy_clk))
> +		return PTR_ERR(phy->apb_phy_clk);
> +
> +	phy->apb_sys_clk = devm_clk_get(dev, "pcie_apb_sys");
> +	if (IS_ERR(phy->apb_sys_clk))
> +		return PTR_ERR(phy->apb_sys_clk);
> +
> +	phy->pcie_aclk = devm_clk_get(dev, "pcie_aclk");
> +	if (IS_ERR(phy->pcie_aclk))
> +		return PTR_ERR(phy->pcie_aclk);
> +
> +	/* registers */
> +	phy->base = devm_platform_ioremap_resource_byname(pdev, "phy");
> +	if (IS_ERR(phy->base))
> +		return PTR_ERR(phy->base);
> +
> +	/* perst reset gpios */
> +	phy->n_gpio_resets = of_gpio_named_count(np, "reset-gpios");
> +	if (phy->n_gpio_resets > MAX_GPIO_RESETS) {
> +		dev_err(dev, "Too many GPIO resets!\n");
> +		return -EINVAL;
> +	}
> +	for (i = 0; i < phy->n_gpio_resets; i++) {
> +		phy->gpio_id_reset[i] = of_get_named_gpio(dev->of_node,
> +							  "reset-gpios", i);
> +		if (phy->gpio_id_reset[i] < 0)
> +			return phy->gpio_id_reset[i];
> +
> +		sprintf(name, "pcie_perst_%d", i);
> +
> +		phy->reset_names[i] = devm_kstrdup_const(dev, name,
> +							 GFP_KERNEL);
> +		if (!phy->reset_names[i])
> +			return -ENOMEM;
> +	}
> +
> +	/* clock request gpios */
> +	phy->n_gpio_clkreq = of_gpio_named_count(np, "clkreq-gpios");
> +	if (phy->n_gpio_clkreq > MAX_GPIO_CLKREQ) {
> +		dev_err(dev, "Too many GPIO clock requests!\n");
> +		return -EINVAL;
> +	}
> +	for (i = 0; i < phy->n_gpio_clkreq; i++) {
> +		phy->gpio_id_clkreq[i] = of_get_named_gpio(dev->of_node,
> +							   "clkreq-gpios", i);
> +		if (phy->gpio_id_clkreq[i] < 0)
> +			return phy->gpio_id_clkreq[i];
> +
> +		sprintf(name, "pcie_clkreq_%d", i);
> +		phy->clkreq_names[i] = devm_kstrdup_const(dev, name,
> +							  GFP_KERNEL);
> +		if (!phy->clkreq_names[i])
> +			return -ENOMEM;
> +	}
> +
> +	hi3670_pcie_get_eyeparam(phy);
> +
> +	return 0;
> +}
> +
> +static int hi3670_pcie_phy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct hi3670_pcie_phy *phy;
> +	struct phy *generic_phy;
> +	int ret;
> +
> +	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> +	if (!phy)
> +		return -ENOMEM;
> +
> +	phy->dev = dev;
> +
> +	ret = hi3670_pcie_phy_get_resources(phy, pdev);
> +	if (ret)
> +		return ret;
> +
> +	generic_phy = devm_phy_create(dev, dev->of_node, &hi3670_phy_ops);
> +	if (IS_ERR(generic_phy)) {
> +		dev_err(dev, "failed to create PHY\n");
> +		return PTR_ERR(generic_phy);
> +	}
> +
> +	phy_set_drvdata(generic_phy, phy);
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id hi3670_pcie_phy_match[] = {
> +	{
> +		.compatible = "hisilicon,hi970-pcie-phy",
> +	},
> +	{},
> +};
> +
> +static struct platform_driver hi3670_pcie_phy_driver = {
> +	.probe	= hi3670_pcie_phy_probe,
> +	.driver = {
> +		.of_match_table	= hi3670_pcie_phy_match,
> +		.name		= "hi3670_pcie_phy",
> +		.suppress_bind_attrs = true,
> +	}
> +};
> +builtin_platform_driver(hi3670_pcie_phy_driver);
> -- 
> 2.31.1
> 

  reply	other threads:[~2021-07-12  9:04 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 1/9] dt-bindings: phy: add bindings for Hikey 960 PCIe PHY Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 2/9] dt-bindings: phy: add bindings for Hikey 970 " Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 3/9] dt-bindings: PCI: kirin: fix compatible string Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 4/9] dt-bindings: PCI: kirin: drop PHY properties Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 5/9] phy: hisilicon: add a PHY driver for Kirin 960 Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 6/9] PCI: kirin: drop the PHY logic from the driver Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 7/9] PCI: kirin: use regmap for APB registers Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 8/9] phy: hisilicon: add driver for Kirin 970 PCIe PHY Mauro Carvalho Chehab
2021-07-12  8:16   ` Manivannan Sadhasivam [this message]
2021-07-09 10:41 ` [PATCH v3 9/9] arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller hardware Mauro Carvalho Chehab
2021-07-12  8:19 ` [PATCH v3 0/9] Add support for Hikey 970 PCIe Manivannan Sadhasivam
2021-07-12 21:49   ` Mauro Carvalho Chehab
2021-07-12 16:52 ` Bjorn Helgaas
2021-07-12 21:11   ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210712081634.GB8113@workstation \
    --to=mani@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linuxarm@huawei.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mauro.chehab@huawei.com \
    --cc=mchehab+huawei@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=songxiaowei@hisilicon.com \
    --cc=vkoul@kernel.org \
    --cc=wangbinghui@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).