linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Elaine Zhang <zhangqing@rock-chips.com>,
	Enric Balletbo i Serra <enric.balletbo@collabora.com>,
	Johan Jonker <jbx6244@gmail.com>,
	Heiko Stuebner <heiko@sntech.de>, Sasha Levin <sashal@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org
Subject: [PATCH AUTOSEL 5.4 10/51] arm64: dts: rockchip: Fix power-controller node names for px30
Date: Wed, 14 Jul 2021 15:44:32 -0400	[thread overview]
Message-ID: <20210714194513.54827-10-sashal@kernel.org> (raw)
In-Reply-To: <20210714194513.54827-1-sashal@kernel.org>

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit d5de0d688ac6e0202674577b05d0726b8a6af401 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/px30.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 98b014a8f916..f297601c9f71 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -213,20 +213,20 @@ power: power-controller {
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_usb@PX30_PD_USB {
+			power-domain@PX30_PD_USB {
 				reg = <PX30_PD_USB>;
 				clocks = <&cru HCLK_HOST>,
 					 <&cru HCLK_OTG>,
 					 <&cru SCLK_OTG_ADP>;
 				pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
 			};
-			pd_sdcard@PX30_PD_SDCARD {
+			power-domain@PX30_PD_SDCARD {
 				reg = <PX30_PD_SDCARD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sdmmc>;
 			};
-			pd_gmac@PX30_PD_GMAC {
+			power-domain@PX30_PD_GMAC {
 				reg = <PX30_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>,
@@ -234,7 +234,7 @@ pd_gmac@PX30_PD_GMAC {
 					 <&cru SCLK_GMAC_RX_TX>;
 				pm_qos = <&qos_gmac>;
 			};
-			pd_mmc_nand@PX30_PD_MMC_NAND {
+			power-domain@PX30_PD_MMC_NAND {
 				reg = <PX30_PD_MMC_NAND>;
 				clocks =  <&cru HCLK_NANDC>,
 					  <&cru HCLK_EMMC>,
@@ -247,14 +247,14 @@ pd_mmc_nand@PX30_PD_MMC_NAND {
 				pm_qos = <&qos_emmc>, <&qos_nand>,
 					 <&qos_sdio>, <&qos_sfc>;
 			};
-			pd_vpu@PX30_PD_VPU {
+			power-domain@PX30_PD_VPU {
 				reg = <PX30_PD_VPU>;
 				clocks = <&cru ACLK_VPU>,
 					 <&cru HCLK_VPU>,
 					 <&cru SCLK_CORE_VPU>;
 				pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
 			};
-			pd_vo@PX30_PD_VO {
+			power-domain@PX30_PD_VO {
 				reg = <PX30_PD_VO>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru ACLK_VOPB>,
@@ -270,7 +270,7 @@ pd_vo@PX30_PD_VO {
 				pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
 					 <&qos_vop_m0>, <&qos_vop_m1>;
 			};
-			pd_vi@PX30_PD_VI {
+			power-domain@PX30_PD_VI {
 				reg = <PX30_PD_VI>;
 				clocks = <&cru ACLK_CIF>,
 					 <&cru ACLK_ISP>,
@@ -281,7 +281,7 @@ pd_vi@PX30_PD_VI {
 					 <&qos_isp_wr>, <&qos_isp_m1>,
 					 <&qos_vip>;
 			};
-			pd_gpu@PX30_PD_GPU {
+			power-domain@PX30_PD_GPU {
 				reg = <PX30_PD_GPU>;
 				clocks = <&cru SCLK_GPU>;
 				pm_qos = <&qos_gpu>;
-- 
2.30.2


  parent reply	other threads:[~2021-07-14 19:53 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 02/51] ARM: dts: gemini: add device_type on pci Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 03/51] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 04/51] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 05/51] ARM: dts: rockchip: Fix the timer clocks order Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 06/51] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 07/51] ARM: dts: rockchip: Fix power-controller node names for rk3066a Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 08/51] ARM: dts: rockchip: Fix power-controller node names for rk3188 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 09/51] ARM: dts: rockchip: Fix power-controller node names for rk3288 Sasha Levin
2021-07-14 19:44 ` Sasha Levin [this message]
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 11/51] arm64: dts: rockchip: Fix power-controller node names for rk3328 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 12/51] reset: ti-syscon: fix to_ti_syscon_reset_data macro Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 13/51] ARM: brcmstb: dts: fix NAND nodes names Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 14/51] ARM: Cygnus: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 15/51] ARM: NSP: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 16/51] ARM: dts: BCM63xx: Fix " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 17/51] ARM: dts: Hurricane 2: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 18/51] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 19/51] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 20/51] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 21/51] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 22/51] kbuild: sink stdout from cmd for silent build Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 25/51] ARM: dts: omap3: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 26/51] ARM: dts: omap5-board-common: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 27/51] ARM: dts: dra7x-evm: Align GPIO " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 28/51] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 29/51] ARM: dts: am437x-gp-evm: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 30/51] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 31/51] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 32/51] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 33/51] arm64: dts: juno: Update SCPI nodes as per the YAML schema Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 34/51] ARM: dts: rockchip: fix supply properties in io-domains nodes Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 35/51] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 36/51] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 37/51] soc/tegra: fuse: Fix Tegra234-only builds Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 38/51] firmware: tegra: bpmp: " Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 39/51] arm64: dts: ls208xa: remove bus-num from dspi node Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 40/51] arm64: dts: imx8mq: assign PCIe clocks Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 41/51] thermal/core: Correct function name thermal_zone_device_unregister() Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 42/51] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 43/51] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 44/51] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 45/51] scsi: libsas: Add LUN number check in .slave_alloc callback Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 46/51] scsi: be2iscsi: Fix some missing space in some messages Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 47/51] scsi: libfc: Fix array index out of bound exception Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 48/51] scsi: qedf: Add check to synchronize abort and flush Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 49/51] sched/fair: Fix CFS bandwidth hrtimer expiry type Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 50/51] s390: introduce proper type handling call_on_stack() macro Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 51/51] cifs: prevent NULL deref in cifs_compose_mount_options() Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210714194513.54827-10-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=enric.balletbo@collabora.com \
    --cc=heiko@sntech.de \
    --cc=jbx6244@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=stable@vger.kernel.org \
    --cc=zhangqing@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).