From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Sasha Levin <sashal@kernel.org>,
devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.4 30/51] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
Date: Wed, 14 Jul 2021 15:44:52 -0400 [thread overview]
Message-ID: <20210714194513.54827-30-sashal@kernel.org> (raw)
In-Reply-To: <20210714194513.54827-1-sashal@kernel.org>
From: Alexandre Torgue <alexandre.torgue@foss.st.com>
[ Upstream commit bf24b91f4baf7e421c770a1d9c7d381b10206ac9 ]
Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.
Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/stm32429i-eval.dts | 8 +++-----
arch/arm/boot/dts/stm32746g-eval.dts | 6 ++----
arch/arm/boot/dts/stm32f429-disco.dts | 6 ++----
arch/arm/boot/dts/stm32f469-disco.dts | 6 ++----
arch/arm/boot/dts/stm32f769-disco.dts | 6 ++----
5 files changed, 11 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index ba08624c6237..4f45e71a1e4d 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -112,17 +112,15 @@ blue {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "Wake up";
linux,code = <KEY_WAKEUP>;
gpios = <&gpioa 0 0>;
};
- button@1 {
+ button-1 {
label = "Tamper";
linux,code = <KEY_RESTART>;
gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 2b1664884ae7..8d64b52838c0 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@ blue {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "Wake up";
linux,code = <KEY_WAKEUP>;
gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index e19d0fe7dbda..49ae2d72afc9 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -79,12 +79,10 @@ green {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "User";
linux,code = <KEY_HOME>;
gpios = <&gpioa 0 0>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index c6dc6d1a051b..0ce450123dda 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -104,12 +104,10 @@ blue {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "User";
linux,code = <KEY_WAKEUP>;
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 6f1d0ac8c31c..a4284b761e7f 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@ red {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "User";
linux,code = <KEY_HOME>;
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
--
2.30.2
next prev parent reply other threads:[~2021-07-14 19:53 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 02/51] ARM: dts: gemini: add device_type on pci Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 03/51] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 04/51] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 05/51] ARM: dts: rockchip: Fix the timer clocks order Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 06/51] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 07/51] ARM: dts: rockchip: Fix power-controller node names for rk3066a Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 08/51] ARM: dts: rockchip: Fix power-controller node names for rk3188 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 09/51] ARM: dts: rockchip: Fix power-controller node names for rk3288 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 10/51] arm64: dts: rockchip: Fix power-controller node names for px30 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 11/51] arm64: dts: rockchip: Fix power-controller node names for rk3328 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 12/51] reset: ti-syscon: fix to_ti_syscon_reset_data macro Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 13/51] ARM: brcmstb: dts: fix NAND nodes names Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 14/51] ARM: Cygnus: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 15/51] ARM: NSP: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 16/51] ARM: dts: BCM63xx: Fix " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 17/51] ARM: dts: Hurricane 2: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 18/51] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 19/51] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 20/51] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 21/51] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 22/51] kbuild: sink stdout from cmd for silent build Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 25/51] ARM: dts: omap3: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 26/51] ARM: dts: omap5-board-common: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 27/51] ARM: dts: dra7x-evm: Align GPIO " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 28/51] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 29/51] ARM: dts: am437x-gp-evm: " Sasha Levin
2021-07-14 19:44 ` Sasha Levin [this message]
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 31/51] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 32/51] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 33/51] arm64: dts: juno: Update SCPI nodes as per the YAML schema Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 34/51] ARM: dts: rockchip: fix supply properties in io-domains nodes Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 35/51] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 36/51] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 37/51] soc/tegra: fuse: Fix Tegra234-only builds Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 38/51] firmware: tegra: bpmp: " Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 39/51] arm64: dts: ls208xa: remove bus-num from dspi node Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 40/51] arm64: dts: imx8mq: assign PCIe clocks Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 41/51] thermal/core: Correct function name thermal_zone_device_unregister() Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 42/51] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 43/51] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 44/51] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 45/51] scsi: libsas: Add LUN number check in .slave_alloc callback Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 46/51] scsi: be2iscsi: Fix some missing space in some messages Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 47/51] scsi: libfc: Fix array index out of bound exception Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 48/51] scsi: qedf: Add check to synchronize abort and flush Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 49/51] sched/fair: Fix CFS bandwidth hrtimer expiry type Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 50/51] s390: introduce proper type handling call_on_stack() macro Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 51/51] cifs: prevent NULL deref in cifs_compose_mount_options() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210714194513.54827-30-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).