linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
	<robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
	<p.zabel@pengutronix.de>, <linux-iio@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [v2 2/8] dt-bindings: iio: adc: Binding ast2600 adc.
Date: Fri, 23 Jul 2021 16:16:15 +0800	[thread overview]
Message-ID: <20210723081621.29477-3-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20210723081621.29477-1-billy_tsai@aspeedtech.com>

This patch add more description about aspeed adc and add two property
for ast2600:
- vref: used to configure reference voltage.
- battery-sensing: used to enable battery sensing mode for last channel.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 .../bindings/iio/adc/aspeed,adc.yaml          | 28 +++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,adc.yaml
index 23f3da1ffca3..a562a7fbc30c 100644
--- a/Documentation/devicetree/bindings/iio/adc/aspeed,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,adc.yaml
@@ -10,14 +10,26 @@ maintainers:
   - Joel Stanley <joel@jms.id.au>
 
 description:
-  This device is a 10-bit converter for 16 voltage channels.  All inputs are
-  single ended.
+  • 10-bits resolution for 16 voltage channels.
+  At ast2400/ast2500 the device has only one engine with 16 voltage channels.
+  At ast2600 the device split into two individual engine and each contains 8 voltage channels.
+  • Channel scanning can be non-continuous.
+  • Programmable ADC clock frequency.
+  • Programmable upper and lower bound for each channels.
+  • Interrupt when larger or less than bounds for each channels.
+  • Support hysteresis for each channels.
+  • Buildin a compensating method.
+  Additional feature at ast2600
+  • Internal or External reference voltage.
+  • Support 2 Internal reference voltage 1.2v or 2.5v.
+  • Integrate dividing circuit for battery sensing.
 
 properties:
   compatible:
     enum:
       - aspeed,ast2400-adc
       - aspeed,ast2500-adc
+      - aspeed,ast2600-adc
 
   reg:
     maxItems: 1
@@ -33,6 +45,18 @@ properties:
   "#io-channel-cells":
     const: 1
 
+  vref:
+    minItems: 900
+    maxItems: 2700
+    default: 2500
+    description:
+      ADC Reference voltage in millivolts.
+
+  battery-sensing:
+    type: boolean
+    description:
+      Inform the driver that last channel will be used to sensor battery.
+
 required:
   - compatible
   - reg
-- 
2.25.1


  parent reply	other threads:[~2021-07-23  8:16 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-23  8:16 [v2 0/8] Add support for ast2600 ADC Billy Tsai
2021-07-23  8:16 ` [v2 1/8] dt-bindings: iio: adc: rename the aspeed adc yaml Billy Tsai
2021-07-23 14:44   ` Jonathan Cameron
2021-07-26  6:53     ` Billy Tsai
2021-07-29 20:31       ` Rob Herring
2021-07-31 17:27         ` Jonathan Cameron
2021-07-23  8:16 ` Billy Tsai [this message]
2021-07-23 14:51   ` [v2 2/8] dt-bindings: iio: adc: Binding ast2600 adc Jonathan Cameron
2021-07-26  7:21     ` Billy Tsai
2021-07-23  8:16 ` [v2 3/8] iio: adc: aspeed: completes the bitfield declare Billy Tsai
2021-07-23 14:55   ` Jonathan Cameron
2021-07-23  8:16 ` [v2 4/8] iio: adc: aspeed: Allow driver to support ast2600 Billy Tsai
2021-07-23 15:29   ` Jonathan Cameron
2021-07-23  8:16 ` [v2 5/8] iio: adc: aspeed: Add func to set sampling rate Billy Tsai
2021-07-23 15:37   ` Jonathan Cameron
2021-07-23  8:16 ` [v2 6/8] iio: adc: aspeed: Add compensation phase Billy Tsai
2021-07-23 15:44   ` Jonathan Cameron
2021-07-23  8:16 ` [v2 7/8] iio: adc: aspeed: Fix the calculate error of clock Billy Tsai
2021-07-23  8:16 ` [v2 8/8] iio: adc: aspeed: Support battery sensing Billy Tsai
2021-07-23 15:56   ` Jonathan Cameron
2021-07-26  6:54     ` Billy Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210723081621.29477-3-billy_tsai@aspeedtech.com \
    --to=billy_tsai@aspeedtech.com \
    --cc=BMC-SW@aspeedtech.com \
    --cc=andrew@aj.id.au \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=joel@jms.id.au \
    --cc=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --subject='Re: [v2 2/8] dt-bindings: iio: adc: Binding ast2600 adc.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).