[PATCH v7 0/6] media: mt9p031: Read back the real clock rate

[PATCH v7 0/6] media: mt9p031: Read back the real clock rate

[Stefan Riedmueller]

Hi,

Changes in v7:
 - Drop bus-type and bus-width documentation since there is only one
   possible setting.

Changes in v6:
 - Add type, description and constraints to custom endpoint properties
 - Add properties from video-interfaces.yaml
 - Add reviewed-by from Rob to
   media: dt-bindings: mt9p031: Add missing required properties

Changes in v5:
 - Fixed issues reported by dt_binding_check
 - Use /schemas/graph.yaml#/$defs/port-base instead of
   /schemas/graph.yaml#/properties/port since we have additional
   endpoint properties
 - Update commit message

Changes in v4:
 - Add two missing BIT macro conversions
 - Switch to dt-bindings yaml schema before applying changes
 - Drop explicit pclk-sample property documentation patch since it is
   documented in the referenced video-interface schema now. (I hope that
   is correct)

Changes in v3:
 - Dropped 1/5 media: mt9p031: Add support for 8 bit and 10 bit formats
 - Dropped 3/5 media: mt9p031: Implement [gs]_register debug calls
 - Added reviewed-by from Laurent Pinchart to
   media: mt9p031: Read back the real clock rate
 - Dropped unnecessary register reads in
   media: mt9p031: Fix corrupted frame after restarting
 - Changed sorting of register bits from MSB to LSB
 - Added patch to switch to BIT macro
 - Added two additional dt-bindings patches to add missing properties
   documentation

Christian Hemp (1):
  media: mt9p031: Make pixel clock polarity configurable by DT

Dirk Bender (1):
  media: mt9p031: Fix corrupted frame after restarting stream

Enrico Scholz (1):
  media: mt9p031: Read back the real clock rate

Stefan Riedmueller (3):
  media: mt9p031: Use BIT macro
  media: dt-bindings: mt9p031: Convert bindings to yaml
  media: dt-bindings: mt9p031: Add missing required properties

 .../bindings/media/i2c/aptina,mt9p031.yaml    | 108 ++++++++++++++++++
 .../devicetree/bindings/media/i2c/mt9p031.txt |  40 -------
 MAINTAINERS                                   |   1 +
 drivers/media/i2c/Kconfig                     |   1 +
 drivers/media/i2c/mt9p031.c                   |  80 ++++++++++---
 include/media/i2c/mt9p031.h                   |   1 +
 6 files changed, 173 insertions(+), 58 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt

-- 
2.25.1

[PATCH v7 1/6] media: mt9p031: Read back the real clock rate

[Stefan Riedmueller]

From: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>

The real and requested clock can differ and because it is used to
calculate PLL values, the real clock rate should be read.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/mt9p031.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 6eb88ef99783..9dea7c813852 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -229,6 +229,7 @@ static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
 
 	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
 	struct mt9p031_platform_data *pdata = mt9p031->pdata;
+	unsigned long ext_freq;
 	int ret;
 
 	mt9p031->clk = devm_clk_get(&client->dev, NULL);
@@ -239,13 +240,15 @@ static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
 	if (ret < 0)
 		return ret;
 
+	ext_freq = clk_get_rate(mt9p031->clk);
+
 	/* If the external clock frequency is out of bounds for the PLL use the
 	 * pixel clock divider only and disable the PLL.
 	 */
-	if (pdata->ext_freq > limits.ext_clock_max) {
+	if (ext_freq > limits.ext_clock_max) {
 		unsigned int div;
 
-		div = DIV_ROUND_UP(pdata->ext_freq, pdata->target_freq);
+		div = DIV_ROUND_UP(ext_freq, pdata->target_freq);
 		div = roundup_pow_of_two(div) / 2;
 
 		mt9p031->clk_div = min_t(unsigned int, div, 64);
@@ -254,7 +257,7 @@ static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
 		return 0;
 	}
 
-	mt9p031->pll.ext_clock = pdata->ext_freq;
+	mt9p031->pll.ext_clock = ext_freq;
 	mt9p031->pll.pix_clock = pdata->target_freq;
 	mt9p031->use_pll = true;
 
-- 
2.25.1

[PATCH v7 2/6] media: mt9p031: Make pixel clock polarity configurable by DT

[Stefan Riedmueller]

From: Christian Hemp <c.hemp@phytec.de>

Evaluate the desired pixel clock polarity from the device tree.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 drivers/media/i2c/Kconfig   |  1 +
 drivers/media/i2c/mt9p031.c | 20 +++++++++++++++++++-
 include/media/i2c/mt9p031.h |  1 +
 3 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 588f8eb95984..1f9e98be8066 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1187,6 +1187,7 @@ config VIDEO_MT9P031
 	select MEDIA_CONTROLLER
 	select VIDEO_V4L2_SUBDEV_API
 	select VIDEO_APTINA_PLL
+	select V4L2_FWNODE
 	help
 	  This is a Video4Linux2 sensor driver for the Aptina
 	  (Micron) mt9p031 5 Mpixel camera.
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 9dea7c813852..ea90aff576ba 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -27,6 +27,7 @@
 #include <media/v4l2-async.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
 #include <media/v4l2-subdev.h>
 
 #include "aptina-pll.h"
@@ -372,6 +373,14 @@ static int __mt9p031_set_power(struct mt9p031 *mt9p031, bool on)
 		return ret;
 	}
 
+	/* Configure the pixel clock polarity */
+	if (mt9p031->pdata && mt9p031->pdata->pixclk_pol) {
+		ret = mt9p031_write(client, MT9P031_PIXEL_CLOCK_CONTROL,
+				MT9P031_PIXEL_CLOCK_INVERT);
+		if (ret < 0)
+			return ret;
+	}
+
 	return v4l2_ctrl_handler_setup(&mt9p031->ctrls);
 }
 
@@ -1014,8 +1023,11 @@ static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = {
 static struct mt9p031_platform_data *
 mt9p031_get_pdata(struct i2c_client *client)
 {
-	struct mt9p031_platform_data *pdata;
+	struct mt9p031_platform_data *pdata = NULL;
 	struct device_node *np;
+	struct v4l2_fwnode_endpoint endpoint = {
+		.bus_type = V4L2_MBUS_PARALLEL
+	};
 
 	if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
 		return client->dev.platform_data;
@@ -1024,6 +1036,9 @@ mt9p031_get_pdata(struct i2c_client *client)
 	if (!np)
 		return NULL;
 
+	if (v4l2_fwnode_endpoint_parse(of_fwnode_handle(np), &endpoint) < 0)
+		goto done;
+
 	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		goto done;
@@ -1031,6 +1046,9 @@ mt9p031_get_pdata(struct i2c_client *client)
 	of_property_read_u32(np, "input-clock-frequency", &pdata->ext_freq);
 	of_property_read_u32(np, "pixel-clock-frequency", &pdata->target_freq);
 
+	pdata->pixclk_pol = !!(endpoint.bus.parallel.flags &
+			       V4L2_MBUS_PCLK_SAMPLE_RISING);
+
 done:
 	of_node_put(np);
 	return pdata;
diff --git a/include/media/i2c/mt9p031.h b/include/media/i2c/mt9p031.h
index 7c29c53aa988..f933cd0be8e5 100644
--- a/include/media/i2c/mt9p031.h
+++ b/include/media/i2c/mt9p031.h
@@ -10,6 +10,7 @@ struct v4l2_subdev;
  * @target_freq: Pixel clock frequency
  */
 struct mt9p031_platform_data {
+	unsigned int pixclk_pol:1;
 	int ext_freq;
 	int target_freq;
 };
-- 
2.25.1

[PATCH v7 3/6] media: mt9p031: Fix corrupted frame after restarting stream

[Stefan Riedmueller]

From: Dirk Bender <d.bender@phytec.de>

To prevent corrupted frames after starting and stopping the sensor its
datasheet specifies a specific pause sequence to follow:

Stopping:
	Set Pause_Restart Bit -> Set Restart Bit -> Set Chip_Enable Off

Restarting:
	Set Chip_Enable On -> Clear Pause_Restart Bit

The Restart Bit is cleared automatically and must not be cleared
manually as this would cause undefined behavior.

Signed-off-by: Dirk Bender <d.bender@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 drivers/media/i2c/mt9p031.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index ea90aff576ba..ee2777059682 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -79,7 +79,9 @@
 #define		MT9P031_PIXEL_CLOCK_INVERT		(1 << 15)
 #define		MT9P031_PIXEL_CLOCK_SHIFT(n)		((n) << 8)
 #define		MT9P031_PIXEL_CLOCK_DIVIDE(n)		((n) << 0)
-#define MT9P031_FRAME_RESTART				0x0b
+#define MT9P031_RESTART					0x0b
+#define		MT9P031_FRAME_PAUSE_RESTART		(1 << 1)
+#define		MT9P031_FRAME_RESTART			(1 << 0)
 #define MT9P031_SHUTTER_DELAY				0x0c
 #define MT9P031_RST					0x0d
 #define		MT9P031_RST_ENABLE			1
@@ -456,9 +458,23 @@ static int mt9p031_set_params(struct mt9p031 *mt9p031)
 static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable)
 {
 	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	int val;
 	int ret;
 
 	if (!enable) {
+		/* enable pause restart */
+		val = MT9P031_FRAME_PAUSE_RESTART;
+		ret = mt9p031_write(client, MT9P031_RESTART, val);
+		if (ret < 0)
+			return ret;
+
+		/* enable restart + keep pause restart set */
+		val |= MT9P031_FRAME_RESTART;
+		ret = mt9p031_write(client, MT9P031_RESTART, val);
+		if (ret < 0)
+			return ret;
+
 		/* Stop sensor readout */
 		ret = mt9p031_set_output_control(mt9p031,
 						 MT9P031_OUTPUT_CONTROL_CEN, 0);
@@ -478,6 +494,16 @@ static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable)
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * - clear pause restart
+	 * - don't clear restart as clearing restart manually can cause
+	 *   undefined behavior
+	 */
+	val = MT9P031_FRAME_RESTART;
+	ret = mt9p031_write(client, MT9P031_RESTART, val);
+	if (ret < 0)
+		return ret;
+
 	return mt9p031_pll_enable(mt9p031);
 }
 
-- 
2.25.1

[PATCH v7 4/6] media: mt9p031: Use BIT macro

[Stefan Riedmueller]

Make use of the BIT macro for setting individual bits. This improves
readability and safety with respect to shifts.

When on it also remove two zero value disable defines.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 drivers/media/i2c/mt9p031.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index ee2777059682..cbce8b88dbcf 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -76,40 +76,38 @@
 #define	MT9P031_PLL_CONFIG_1				0x11
 #define	MT9P031_PLL_CONFIG_2				0x12
 #define MT9P031_PIXEL_CLOCK_CONTROL			0x0a
-#define		MT9P031_PIXEL_CLOCK_INVERT		(1 << 15)
+#define		MT9P031_PIXEL_CLOCK_INVERT		BIT(15)
 #define		MT9P031_PIXEL_CLOCK_SHIFT(n)		((n) << 8)
 #define		MT9P031_PIXEL_CLOCK_DIVIDE(n)		((n) << 0)
 #define MT9P031_RESTART					0x0b
-#define		MT9P031_FRAME_PAUSE_RESTART		(1 << 1)
-#define		MT9P031_FRAME_RESTART			(1 << 0)
+#define		MT9P031_FRAME_PAUSE_RESTART		BIT(1)
+#define		MT9P031_FRAME_RESTART			BIT(0)
 #define MT9P031_SHUTTER_DELAY				0x0c
 #define MT9P031_RST					0x0d
-#define		MT9P031_RST_ENABLE			1
-#define		MT9P031_RST_DISABLE			0
+#define		MT9P031_RST_ENABLE			BIT(0)
 #define MT9P031_READ_MODE_1				0x1e
 #define MT9P031_READ_MODE_2				0x20
-#define		MT9P031_READ_MODE_2_ROW_MIR		(1 << 15)
-#define		MT9P031_READ_MODE_2_COL_MIR		(1 << 14)
-#define		MT9P031_READ_MODE_2_ROW_BLC		(1 << 6)
+#define		MT9P031_READ_MODE_2_ROW_MIR		BIT(15)
+#define		MT9P031_READ_MODE_2_COL_MIR		BIT(14)
+#define		MT9P031_READ_MODE_2_ROW_BLC		BIT(6)
 #define MT9P031_ROW_ADDRESS_MODE			0x22
 #define MT9P031_COLUMN_ADDRESS_MODE			0x23
 #define MT9P031_GLOBAL_GAIN				0x35
 #define		MT9P031_GLOBAL_GAIN_MIN			8
 #define		MT9P031_GLOBAL_GAIN_MAX			1024
 #define		MT9P031_GLOBAL_GAIN_DEF			8
-#define		MT9P031_GLOBAL_GAIN_MULT		(1 << 6)
+#define		MT9P031_GLOBAL_GAIN_MULT		BIT(6)
 #define MT9P031_ROW_BLACK_TARGET			0x49
 #define MT9P031_ROW_BLACK_DEF_OFFSET			0x4b
 #define MT9P031_GREEN1_OFFSET				0x60
 #define MT9P031_GREEN2_OFFSET				0x61
 #define MT9P031_BLACK_LEVEL_CALIBRATION			0x62
-#define		MT9P031_BLC_MANUAL_BLC			(1 << 0)
+#define		MT9P031_BLC_MANUAL_BLC			BIT(0)
 #define MT9P031_RED_OFFSET				0x63
 #define MT9P031_BLUE_OFFSET				0x64
 #define MT9P031_TEST_PATTERN				0xa0
 #define		MT9P031_TEST_PATTERN_SHIFT		3
-#define		MT9P031_TEST_PATTERN_ENABLE		(1 << 0)
-#define		MT9P031_TEST_PATTERN_DISABLE		(0 << 0)
+#define		MT9P031_TEST_PATTERN_ENABLE		BIT(0)
 #define MT9P031_TEST_PATTERN_GREEN			0xa1
 #define MT9P031_TEST_PATTERN_RED			0xa2
 #define MT9P031_TEST_PATTERN_BLUE			0xa3
@@ -199,7 +197,7 @@ static int mt9p031_reset(struct mt9p031 *mt9p031)
 	ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_ENABLE);
 	if (ret < 0)
 		return ret;
-	ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_DISABLE);
+	ret = mt9p031_write(client, MT9P031_RST, 0);
 	if (ret < 0)
 		return ret;
 
@@ -794,8 +792,7 @@ static int mt9p031_s_ctrl(struct v4l2_ctrl *ctrl)
 			if (ret < 0)
 				return ret;
 
-			return mt9p031_write(client, MT9P031_TEST_PATTERN,
-					     MT9P031_TEST_PATTERN_DISABLE);
+			return mt9p031_write(client, MT9P031_TEST_PATTERN, 0);
 		}
 
 		ret = mt9p031_write(client, MT9P031_TEST_PATTERN_GREEN, 0x05a0);
-- 
2.25.1

[PATCH v7 5/6] media: dt-bindings: mt9p031: Convert bindings to yaml

[Stefan Riedmueller]

Convert mt9p031 sensor bindings to yaml schema. Also update the
MAINTAINERS entry.

Although input-clock-frequency and pixel-clock-frequency have not been
definded as endpoint propierties in the textual bindings, the sensor
does parse them from the endpoint. Thus move these properties to the
endpoint in the new yaml bindings.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 .../bindings/media/i2c/aptina,mt9p031.yaml    | 86 +++++++++++++++++++
 .../devicetree/bindings/media/i2c/mt9p031.txt | 40 ---------
 MAINTAINERS                                   |  1 +
 3 files changed, 87 insertions(+), 40 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
new file mode 100644
index 000000000000..bc0e8e5194e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9p031.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor
+  with an active array size of 2592H x 1944V. It is programmable through a
+  simple two-wire serial interface.
+
+properties:
+  compatible:
+    enum:
+      - aptina,mt9p031
+      - aptina,mt9p031m
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: Chip reset GPIO
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          input-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 6000000
+            maximum: 96000000
+            description: Input clock frequency
+
+          pixel-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 96000000
+            description: Target pixel clock frequency
+
+          pclk-sample:
+            default: 0
+
+        required:
+          - input-clock-frequency
+          - pixel-clock-frequency
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mt9p031@5d {
+            compatible = "aptina,mt9p031";
+            reg = <0x5d>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            port {
+                mt9p031_1: endpoint {
+                    input-clock-frequency = <6000000>;
+                    pixel-clock-frequency = <96000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
deleted file mode 100644
index cb60443ff78f..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
-
-The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 2592H x 1944V. It is programmable through a simple
-two-wire serial interface.
-
-Required Properties:
-- compatible: value should be either one among the following
-	(a) "aptina,mt9p031" for mt9p031 sensor
-	(b) "aptina,mt9p031m" for mt9p031m sensor
-
-- input-clock-frequency: Input clock frequency.
-
-- pixel-clock-frequency: Pixel clock frequency.
-
-Optional Properties:
-- reset-gpios: Chip reset GPIO
-
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	i2c0@1c22000 {
-		...
-		...
-		mt9p031@5d {
-			compatible = "aptina,mt9p031";
-			reg = <0x5d>;
-			reset-gpios = <&gpio3 30 0>;
-
-			port {
-				mt9p031_1: endpoint {
-					input-clock-frequency = <6000000>;
-					pixel-clock-frequency = <96000000>;
-				};
-			};
-		};
-		...
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 19135a9d778e..e050790c846a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12637,6 +12637,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 F:	drivers/media/i2c/mt9p031.c
 F:	include/media/i2c/mt9p031.h
 
-- 
2.25.1

Re: [PATCH v7 5/6] media: dt-bindings: mt9p031: Convert bindings to yaml

[Rob Herring]

On Mon, 26 Jul 2021 09:35:17 +0200, Stefan Riedmueller wrote:
> Convert mt9p031 sensor bindings to yaml schema. Also update the
> MAINTAINERS entry.
> 
> Although input-clock-frequency and pixel-clock-frequency have not been
> definded as endpoint propierties in the textual bindings, the sensor
> does parse them from the endpoint. Thus move these properties to the
> endpoint in the new yaml bindings.
> 
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> ---
>  .../bindings/media/i2c/aptina,mt9p031.yaml    | 86 +++++++++++++++++++
>  .../devicetree/bindings/media/i2c/mt9p031.txt | 40 ---------
>  MAINTAINERS                                   |  1 +
>  3 files changed, 87 insertions(+), 40 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
>  delete mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v7 6/6] media: dt-bindings: mt9p031: Add missing required properties

[Stefan Riedmueller]

Add missing required clocks and supply regulator properties for the
sensor input clock and vdd, vdd_io and vaa supply regulators.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/media/i2c/aptina,mt9p031.yaml    | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
index bc0e8e5194e8..c2ba78116dbb 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -24,6 +24,18 @@ properties:
     description: I2C device address
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Digital supply voltage, 1.8 V
+
+  vdd_io-supply:
+    description: I/O supply voltage, 1.8 or 2.8 V
+
+  vaa-supply:
+    description: Analog supply voltage, 2.8 V
+
   reset-gpios:
     maxItems: 1
     description: Chip reset GPIO
@@ -59,6 +71,10 @@ properties:
 required:
   - compatible
   - reg
+  - clocks
+  - vdd-supply
+  - vdd_io-supply
+  - vaa-supply
   - port
 
 additionalProperties: false
@@ -74,6 +90,12 @@ examples:
             reg = <0x5d>;
             reset-gpios = <&gpio_sensor 0 0>;
 
+            clocks = <&sensor_clk>;
+
+            vdd-supply = <&reg_vdd>;
+            vdd_io-supply = <&reg_vdd_io>;
+            vaa-supply = <&reg_vaa>;
+
             port {
                 mt9p031_1: endpoint {
                     input-clock-frequency = <6000000>;
-- 
2.25.1