* [PATCH v3 0/2] TCPM non-pd mode
@ 2021-07-28 9:29 Kyle Tso
2021-07-28 9:29 ` [PATCH v3 1/2] dt-bindings: connector: Add pd-supported property Kyle Tso
2021-07-28 9:29 ` [PATCH v3 2/2] usb: typec: tcpm: Support non-PD mode Kyle Tso
0 siblings, 2 replies; 5+ messages in thread
From: Kyle Tso @ 2021-07-28 9:29 UTC (permalink / raw)
To: linux, heikki.krogerus, gregkh, robh+dt
Cc: badhri, linux-usb, linux-kernel, devicetree, Kyle Tso
The reason for this patch is to let the device/system policy decide
whether PD is going to be supported using devicetree properties.
A new dt property "pd-unsupported" is introduced and TCPM uses this
property as a flag to decide whether PD is supported. If the flag is
false (the dt property is not present), the RX functionality of the
low-level driver will not be enabled. The power negotiation related
states will be skipped as well. If the flag is true, everything is as
what it was before.
If "pd-unsupported" is present, and the port is SRC or DRP, another
existing dt property "typec-power-opmode" needs to be specified to
indicate which Rp value should be used when the port is SRC.
changes since v2:
- Negated the meaning and the name of the dt property. Now the name is
"pd-unsupported"
- Changed the control flow if the port is SNK or DRP. Return directly if
the flag is false (PD not supported). Read "self-powered" before that.
---
cover-letter in v2:
---
The reason for this patch is to let the device/system policy decide
whether PD is going to be supported using devicetree properties.
A new dt property "pd-supported" is introduced and TCPM uses this
property as a flag to decide whether PD is supported. If the flag is
false, the RX functionality of the low-level driver will not be enabled.
The power negotiation related states will be skipped as well. If the
flag is true, everything is as what it was before.
If "pd-supported" is not present, and the port is SRC or DRP, another
existing dt property "typec-power-opmode" needs to be specified to
indicate which Rp value should be used when the port is SRC.
changes since v1:
- revise the patch to use dt properties
Kyle Tso (2):
dt-bindings: connector: Add pd-supported property
usb: typec: tcpm: Support non-PD mode
.../bindings/connector/usb-connector.yaml | 4 +
drivers/usb/typec/tcpm/tcpm.c | 88 +++++++++++++++----
2 files changed, 74 insertions(+), 18 deletions(-)
--
2.32.0.432.gabb21c7263-goog
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v3 1/2] dt-bindings: connector: Add pd-supported property 2021-07-28 9:29 [PATCH v3 0/2] TCPM non-pd mode Kyle Tso @ 2021-07-28 9:29 ` Kyle Tso 2021-07-28 14:04 ` Guenter Roeck 2021-07-28 9:29 ` [PATCH v3 2/2] usb: typec: tcpm: Support non-PD mode Kyle Tso 1 sibling, 1 reply; 5+ messages in thread From: Kyle Tso @ 2021-07-28 9:29 UTC (permalink / raw) To: linux, heikki.krogerus, gregkh, robh+dt Cc: badhri, linux-usb, linux-kernel, devicetree, Kyle Tso Set "pd-unsupported" property if the Type-C connector has no power delivery support. Signed-off-by: Kyle Tso <kyletso@google.com> --- changes since v2: - Negated the meaning and the name of the dt property. Now the name is "pd-unsupported". .../devicetree/bindings/connector/usb-connector.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 92b49bc37939..21ec470117a6 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -111,6 +111,10 @@ properties: - 1.5A - 3.0A + pd-unsupported: + description: Set this property if the Type-C connector has no power delivery support. + type: boolean + # The following are optional properties for "usb-c-connector" with power # delivery support. source-pdos: -- 2.32.0.432.gabb21c7263-goog ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: connector: Add pd-supported property 2021-07-28 9:29 ` [PATCH v3 1/2] dt-bindings: connector: Add pd-supported property Kyle Tso @ 2021-07-28 14:04 ` Guenter Roeck 0 siblings, 0 replies; 5+ messages in thread From: Guenter Roeck @ 2021-07-28 14:04 UTC (permalink / raw) To: Kyle Tso, heikki.krogerus, gregkh, robh+dt Cc: badhri, linux-usb, linux-kernel, devicetree On 7/28/21 2:29 AM, Kyle Tso wrote: > Set "pd-unsupported" property if the Type-C connector has no power > delivery support. > $subject still says "pd-supported" > Signed-off-by: Kyle Tso <kyletso@google.com> > --- > changes since v2: > - Negated the meaning and the name of the dt property. Now the name is > "pd-unsupported". > > .../devicetree/bindings/connector/usb-connector.yaml | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml > index 92b49bc37939..21ec470117a6 100644 > --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml > +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml > @@ -111,6 +111,10 @@ properties: > - 1.5A > - 3.0A > > + pd-unsupported: > + description: Set this property if the Type-C connector has no power delivery support. > + type: boolean > + > # The following are optional properties for "usb-c-connector" with power > # delivery support. > source-pdos: > ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v3 2/2] usb: typec: tcpm: Support non-PD mode 2021-07-28 9:29 [PATCH v3 0/2] TCPM non-pd mode Kyle Tso 2021-07-28 9:29 ` [PATCH v3 1/2] dt-bindings: connector: Add pd-supported property Kyle Tso @ 2021-07-28 9:29 ` Kyle Tso 2021-07-28 14:31 ` Guenter Roeck 1 sibling, 1 reply; 5+ messages in thread From: Kyle Tso @ 2021-07-28 9:29 UTC (permalink / raw) To: linux, heikki.krogerus, gregkh, robh+dt Cc: badhri, linux-usb, linux-kernel, devicetree, Kyle Tso Even if the Type-C controller supports PD, it is doable to disable PD capabilities with the current state machine in TCPM. Without enabling RX in low-level drivers and with skipping the power negotiation, the port is eligible to be a non-PD Type-C port. Use new flags whose values are populated from the device tree to decide the port PD capability. Adding "pd-unsupported" property in device tree indicates that the port does not support PD. If "pd-unsupported" is not found, "typec-power-opmode" shall be added to specify the advertised Rp value if the port supports SRC role. Signed-off-by: Kyle Tso <kyletso@google.com> --- changes since v2: - Changed the control flow if the port is SNK or DRP. Return directly if the flag is false (PD not supported). Read "self-powered" before that. drivers/usb/typec/tcpm/tcpm.c | 88 ++++++++++++++++++++++++++++------- 1 file changed, 70 insertions(+), 18 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 5b22a1c931a9..d8d6ef8c6282 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -316,6 +316,7 @@ struct tcpm_port { struct typec_partner *partner; enum typec_cc_status cc_req; + enum typec_cc_status src_rp; /* work only if pd_supported == false */ enum typec_cc_status cc1; enum typec_cc_status cc2; @@ -323,6 +324,7 @@ struct tcpm_port { bool attached; bool connected; + bool pd_supported; enum typec_port_type port_type; /* @@ -804,6 +806,7 @@ static void tcpm_apply_rc(struct tcpm_port *port) } } + /* * Determine RP value to set based on maximum current supported * by a port if configured as source. @@ -815,6 +818,9 @@ static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port) int nr_pdo = port->nr_src_pdo; int i; + if (!port->pd_supported) + return port->src_rp; + /* * Search for first entry with matching voltage. * It should report the maximum supported current. @@ -3568,9 +3574,11 @@ static int tcpm_src_attach(struct tcpm_port *port) if (ret < 0) return ret; - ret = port->tcpc->set_pd_rx(port->tcpc, true); - if (ret < 0) - goto out_disable_mux; + if (port->pd_supported) { + ret = port->tcpc->set_pd_rx(port->tcpc, true); + if (ret < 0) + goto out_disable_mux; + } /* * USB Type-C specification, version 1.2, @@ -3600,7 +3608,8 @@ static int tcpm_src_attach(struct tcpm_port *port) out_disable_vconn: tcpm_set_vconn(port, false); out_disable_pd: - port->tcpc->set_pd_rx(port->tcpc, false); + if (port->pd_supported) + port->tcpc->set_pd_rx(port->tcpc, false); out_disable_mux: tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE, TYPEC_ORIENTATION_NONE); @@ -3804,6 +3813,20 @@ static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc) } } +static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode) +{ + switch (opmode) { + case TYPEC_PWR_MODE_USB: + return TYPEC_CC_RP_DEF; + case TYPEC_PWR_MODE_1_5A: + return TYPEC_CC_RP_1_5; + case TYPEC_PWR_MODE_3_0A: + case TYPEC_PWR_MODE_PD: + default: + return TYPEC_CC_RP_3_0; + } +} + static void run_state_machine(struct tcpm_port *port) { int ret; @@ -3914,6 +3937,10 @@ static void run_state_machine(struct tcpm_port *port) if (port->ams == POWER_ROLE_SWAP || port->ams == FAST_ROLE_SWAP) tcpm_ams_finish(port); + if (!port->pd_supported) { + tcpm_set_state(port, SRC_READY, 0); + break; + } port->upcoming_state = SRC_SEND_CAPABILITIES; tcpm_ams_start(port, POWER_NEGOTIATION); break; @@ -4161,7 +4188,10 @@ static void run_state_machine(struct tcpm_port *port) current_lim = PD_P_SNK_STDBY_MW / 5; tcpm_set_current_limit(port, current_lim, 5000); tcpm_set_charge(port, true); - tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); + if (!port->pd_supported) + tcpm_set_state(port, SNK_READY, 0); + else + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); break; } /* @@ -4389,7 +4419,8 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_vbus(port, true); if (port->ams == HARD_RESET) tcpm_ams_finish(port); - port->tcpc->set_pd_rx(port->tcpc, true); + if (port->pd_supported) + port->tcpc->set_pd_rx(port->tcpc, true); tcpm_set_attached_state(port, true); tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON); break; @@ -5898,6 +5929,7 @@ EXPORT_SYMBOL_GPL(tcpm_tcpc_reset); static int tcpm_fw_get_caps(struct tcpm_port *port, struct fwnode_handle *fwnode) { + const char *opmode_str; const char *cap_str; int ret; u32 mw, frs_current; @@ -5932,22 +5964,37 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, return ret; port->typec_caps.type = ret; port->port_type = port->typec_caps.type; + port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-unsupported"); port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop"); + if (port->port_type == TYPEC_PORT_SNK) goto sink; /* Get source pdos */ - ret = fwnode_property_count_u32(fwnode, "source-pdos"); - if (ret <= 0) - return -EINVAL; + if (port->pd_supported) { + ret = fwnode_property_count_u32(fwnode, "source-pdos"); + if (ret <= 0) + return -EINVAL; - port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS); - ret = fwnode_property_read_u32_array(fwnode, "source-pdos", - port->src_pdo, port->nr_src_pdo); - if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo, - port->nr_src_pdo)) - return -EINVAL; + port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS); + ret = fwnode_property_read_u32_array(fwnode, "source-pdos", + port->src_pdo, port->nr_src_pdo); + if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo, + port->nr_src_pdo)) + return -EINVAL; + } else { + port->nr_src_pdo = 0; + ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str); + if (ret == 0) { + ret = typec_find_pwr_opmode(opmode_str); + if (ret < 0) + return ret; + port->src_rp = tcpm_pwr_opmode_to_rp(ret); + } else { + return ret; + } + } if (port->port_type == TYPEC_PORT_SRC) return 0; @@ -5961,6 +6008,13 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, if (port->typec_caps.prefer_role < 0) return -EINVAL; sink: + port->self_powered = fwnode_property_read_bool(fwnode, "self-powered"); + + if (!port->pd_supported) { + port->nr_snk_pdo = 0; + return 0; + } + /* Get sink pdos */ ret = fwnode_property_count_u32(fwnode, "sink-pdos"); if (ret <= 0) @@ -5977,9 +6031,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, return -EINVAL; port->operating_snk_mw = mw / 1000; - port->self_powered = fwnode_property_read_bool(fwnode, "self-powered"); - - /* FRS can only be supported byb DRP ports */ + /* FRS can only be supported by DRP ports */ if (port->port_type == TYPEC_PORT_DRP) { ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current", &frs_current); -- 2.32.0.432.gabb21c7263-goog ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v3 2/2] usb: typec: tcpm: Support non-PD mode 2021-07-28 9:29 ` [PATCH v3 2/2] usb: typec: tcpm: Support non-PD mode Kyle Tso @ 2021-07-28 14:31 ` Guenter Roeck 0 siblings, 0 replies; 5+ messages in thread From: Guenter Roeck @ 2021-07-28 14:31 UTC (permalink / raw) To: Kyle Tso, heikki.krogerus, gregkh, robh+dt Cc: badhri, linux-usb, linux-kernel, devicetree On 7/28/21 2:29 AM, Kyle Tso wrote: > Even if the Type-C controller supports PD, it is doable to disable PD > capabilities with the current state machine in TCPM. Without enabling RX > in low-level drivers and with skipping the power negotiation, the port > is eligible to be a non-PD Type-C port. Use new flags whose values are > populated from the device tree to decide the port PD capability. Adding > "pd-unsupported" property in device tree indicates that the port does > not support PD. If "pd-unsupported" is not found, "typec-power-opmode" "is not found" -> "is found" (based on previous revision) I think "If PD is not supported, ..." might be a better wording and avoid the use of a property name here. > shall be added to specify the advertised Rp value if the port supports > SRC role. > > Signed-off-by: Kyle Tso <kyletso@google.com> > --- > changes since v2: > - Changed the control flow if the port is SNK or DRP. Return directly if > the flag is false (PD not supported). Read "self-powered" before that. > > drivers/usb/typec/tcpm/tcpm.c | 88 ++++++++++++++++++++++++++++------- > 1 file changed, 70 insertions(+), 18 deletions(-) > > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c > index 5b22a1c931a9..d8d6ef8c6282 100644 > --- a/drivers/usb/typec/tcpm/tcpm.c > +++ b/drivers/usb/typec/tcpm/tcpm.c > @@ -316,6 +316,7 @@ struct tcpm_port { > struct typec_partner *partner; > > enum typec_cc_status cc_req; > + enum typec_cc_status src_rp; /* work only if pd_supported == false */ > > enum typec_cc_status cc1; > enum typec_cc_status cc2; > @@ -323,6 +324,7 @@ struct tcpm_port { > > bool attached; > bool connected; > + bool pd_supported; > enum typec_port_type port_type; > > /* > @@ -804,6 +806,7 @@ static void tcpm_apply_rc(struct tcpm_port *port) > } > } > > + stray empty line > /* > * Determine RP value to set based on maximum current supported > * by a port if configured as source. > @@ -815,6 +818,9 @@ static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port) > int nr_pdo = port->nr_src_pdo; > int i; > > + if (!port->pd_supported) > + return port->src_rp; > + > /* > * Search for first entry with matching voltage. > * It should report the maximum supported current. > @@ -3568,9 +3574,11 @@ static int tcpm_src_attach(struct tcpm_port *port) > if (ret < 0) > return ret; > > - ret = port->tcpc->set_pd_rx(port->tcpc, true); > - if (ret < 0) > - goto out_disable_mux; > + if (port->pd_supported) { > + ret = port->tcpc->set_pd_rx(port->tcpc, true); > + if (ret < 0) > + goto out_disable_mux; > + } > > /* > * USB Type-C specification, version 1.2, > @@ -3600,7 +3608,8 @@ static int tcpm_src_attach(struct tcpm_port *port) > out_disable_vconn: > tcpm_set_vconn(port, false); > out_disable_pd: > - port->tcpc->set_pd_rx(port->tcpc, false); > + if (port->pd_supported) > + port->tcpc->set_pd_rx(port->tcpc, false); > out_disable_mux: > tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE, > TYPEC_ORIENTATION_NONE); > @@ -3804,6 +3813,20 @@ static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc) > } > } > > +static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode) > +{ > + switch (opmode) { > + case TYPEC_PWR_MODE_USB: > + return TYPEC_CC_RP_DEF; > + case TYPEC_PWR_MODE_1_5A: > + return TYPEC_CC_RP_1_5; > + case TYPEC_PWR_MODE_3_0A: > + case TYPEC_PWR_MODE_PD: > + default: > + return TYPEC_CC_RP_3_0; > + } > +} > + > static void run_state_machine(struct tcpm_port *port) > { > int ret; > @@ -3914,6 +3937,10 @@ static void run_state_machine(struct tcpm_port *port) > if (port->ams == POWER_ROLE_SWAP || > port->ams == FAST_ROLE_SWAP) > tcpm_ams_finish(port); > + if (!port->pd_supported) { > + tcpm_set_state(port, SRC_READY, 0); > + break; > + } > port->upcoming_state = SRC_SEND_CAPABILITIES; > tcpm_ams_start(port, POWER_NEGOTIATION); > break; > @@ -4161,7 +4188,10 @@ static void run_state_machine(struct tcpm_port *port) > current_lim = PD_P_SNK_STDBY_MW / 5; > tcpm_set_current_limit(port, current_lim, 5000); > tcpm_set_charge(port, true); > - tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); > + if (!port->pd_supported) > + tcpm_set_state(port, SNK_READY, 0); > + else > + tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0); > break; > } > /* > @@ -4389,7 +4419,8 @@ static void run_state_machine(struct tcpm_port *port) > tcpm_set_vbus(port, true); > if (port->ams == HARD_RESET) > tcpm_ams_finish(port); > - port->tcpc->set_pd_rx(port->tcpc, true); > + if (port->pd_supported) > + port->tcpc->set_pd_rx(port->tcpc, true); > tcpm_set_attached_state(port, true); > tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON); > break; > @@ -5898,6 +5929,7 @@ EXPORT_SYMBOL_GPL(tcpm_tcpc_reset); > static int tcpm_fw_get_caps(struct tcpm_port *port, > struct fwnode_handle *fwnode) > { > + const char *opmode_str; > const char *cap_str; > int ret; > u32 mw, frs_current; > @@ -5932,22 +5964,37 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, > return ret; > port->typec_caps.type = ret; > port->port_type = port->typec_caps.type; > + port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-unsupported"); > > port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop"); > + Unnecessary whitespace change > if (port->port_type == TYPEC_PORT_SNK) > goto sink; > > /* Get source pdos */ > - ret = fwnode_property_count_u32(fwnode, "source-pdos"); > - if (ret <= 0) > - return -EINVAL; > + if (port->pd_supported) { > + ret = fwnode_property_count_u32(fwnode, "source-pdos"); > + if (ret <= 0) > + return -EINVAL; > > - port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS); > - ret = fwnode_property_read_u32_array(fwnode, "source-pdos", > - port->src_pdo, port->nr_src_pdo); > - if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo, > - port->nr_src_pdo)) > - return -EINVAL; > + port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS); > + ret = fwnode_property_read_u32_array(fwnode, "source-pdos", > + port->src_pdo, port->nr_src_pdo); > + if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo, > + port->nr_src_pdo)) Since we are changing this code, might as well get rid of the unnecessary () around 'ret < 0'. Or, even better, if (ret) return ret; ret = tcpm_validate_caps(port, port->src_pdo, port->nr_src_pdo); if (ret) return ret; because that avoids overwriting the error return code from fwnode_property_read_u32_array(). > + return -EINVAL; > + } else { > + port->nr_src_pdo = 0; That should be unnecessary. > + ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str); > + if (ret == 0) { > + ret = typec_find_pwr_opmode(opmode_str); > + if (ret < 0) > + return ret; > + port->src_rp = tcpm_pwr_opmode_to_rp(ret); > + } else { > + return ret; > + } I prefer 'normal' error handling. if (ret) return ret; ret = typec_find_pwr_opmode(opmode_str); ... > + } > > if (port->port_type == TYPEC_PORT_SRC) > return 0; > @@ -5961,6 +6008,13 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, > if (port->typec_caps.prefer_role < 0) > return -EINVAL; > sink: > + port->self_powered = fwnode_property_read_bool(fwnode, "self-powered"); > + > + if (!port->pd_supported) { > + port->nr_snk_pdo = 0; Should be unnecessary. > + return 0; > + } > + > /* Get sink pdos */ > ret = fwnode_property_count_u32(fwnode, "sink-pdos"); > if (ret <= 0) > @@ -5977,9 +6031,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, > return -EINVAL; > port->operating_snk_mw = mw / 1000; > > - port->self_powered = fwnode_property_read_bool(fwnode, "self-powered"); > - > - /* FRS can only be supported byb DRP ports */ > + /* FRS can only be supported by DRP ports */ > if (port->port_type == TYPEC_PORT_DRP) { > ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current", > &frs_current); > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-07-28 14:31 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-07-28 9:29 [PATCH v3 0/2] TCPM non-pd mode Kyle Tso 2021-07-28 9:29 ` [PATCH v3 1/2] dt-bindings: connector: Add pd-supported property Kyle Tso 2021-07-28 14:04 ` Guenter Roeck 2021-07-28 9:29 ` [PATCH v3 2/2] usb: typec: tcpm: Support non-PD mode Kyle Tso 2021-07-28 14:31 ` Guenter Roeck
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).