linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
	<linux-kernel@vger.kernel.org>,
	Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v2 23/27] ALSA: hda/cs8409: Set fixed sample rate of 48kHz for CS42L42
Date: Wed, 28 Jul 2021 14:44:04 +0100	[thread overview]
Message-ID: <20210728134408.369396-24-vitalyr@opensource.cirrus.com> (raw)
In-Reply-To: <20210728134408.369396-1-vitalyr@opensource.cirrus.com>

From: Stefan Binding <sbinding@opensource.cirrus.com>

CS42L42 is configured to use a fixed sample rate of 48kHz.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>

Changes in v2:
- No changes

---
 sound/pci/hda/patch_cs8409-tables.c | 8 ++++++++
 sound/pci/hda/patch_cs8409.c        | 6 ++++++
 sound/pci/hda/patch_cs8409.h        | 2 ++
 3 files changed, 16 insertions(+)

diff --git a/sound/pci/hda/patch_cs8409-tables.c b/sound/pci/hda/patch_cs8409-tables.c
index a39b2c20f61c..a9a0b8e3b2a9 100644
--- a/sound/pci/hda/patch_cs8409-tables.c
+++ b/sound/pci/hda/patch_cs8409-tables.c
@@ -45,6 +45,14 @@ const struct snd_kcontrol_new cs42l42_adc_volume_mixer = {
 			 HDA_INPUT, CS42L42_VOL_ADC) | HDA_AMP_VAL_MIN_MUTE
 };
 
+const struct hda_pcm_stream cs42l42_48k_pcm_analog_playback = {
+	.rates = SNDRV_PCM_RATE_48000, /* fixed rate */
+};
+
+const struct hda_pcm_stream cs42l42_48k_pcm_analog_capture = {
+	.rates = SNDRV_PCM_RATE_48000, /* fixed rate */
+};
+
 /******************************************************************************
  *                   BULLSEYE / WARLOCK / CYBORG Specific Arrays
  *                               CS8409/CS42L42
diff --git a/sound/pci/hda/patch_cs8409.c b/sound/pci/hda/patch_cs8409.c
index 97649d35aefb..5b6d843ab7fb 100644
--- a/sound/pci/hda/patch_cs8409.c
+++ b/sound/pci/hda/patch_cs8409.c
@@ -884,6 +884,9 @@ void cs8409_cs42l42_fixups(struct hda_codec *codec, const struct hda_fixup *fix,
 
 		break;
 	case HDA_FIXUP_ACT_PROBE:
+		/* Fix Sample Rate to 48kHz */
+		spec->gen.stream_analog_playback = &cs42l42_48k_pcm_analog_playback;
+		spec->gen.stream_analog_capture = &cs42l42_48k_pcm_analog_capture;
 		/* Set initial DMIC volume to -26 dB */
 		snd_hda_codec_amp_init_stereo(codec, CS8409_CS42L42_DMIC_ADC_PIN_NID,
 					      HDA_INPUT, 0, 0xff, 0x19);
@@ -1077,6 +1080,9 @@ void dolphin_fixups(struct hda_codec *codec, const struct hda_fixup *fix, int ac
 
 		break;
 	case HDA_FIXUP_ACT_PROBE:
+		/* Fix Sample Rate to 48kHz */
+		spec->gen.stream_analog_playback = &cs42l42_48k_pcm_analog_playback;
+		spec->gen.stream_analog_capture = &cs42l42_48k_pcm_analog_capture;
 		snd_hda_gen_add_kctl(&spec->gen, "Headphone Playback Volume",
 				     &cs42l42_dac_volume_mixer);
 		snd_hda_gen_add_kctl(&spec->gen, "Mic Capture Volume", &cs42l42_adc_volume_mixer);
diff --git a/sound/pci/hda/patch_cs8409.h b/sound/pci/hda/patch_cs8409.h
index 1b5a8d04ba0f..2208be2ffad1 100644
--- a/sound/pci/hda/patch_cs8409.h
+++ b/sound/pci/hda/patch_cs8409.h
@@ -335,6 +335,8 @@ int cs42l42_volume_info(struct snd_kcontrol *kctrl, struct snd_ctl_elem_info *ui
 int cs42l42_volume_get(struct snd_kcontrol *kctrl, struct snd_ctl_elem_value *uctrl);
 int cs42l42_volume_put(struct snd_kcontrol *kctrl, struct snd_ctl_elem_value *uctrl);
 
+extern const struct hda_pcm_stream cs42l42_48k_pcm_analog_playback;
+extern const struct hda_pcm_stream cs42l42_48k_pcm_analog_capture;
 extern const struct snd_pci_quirk cs8409_fixup_tbl[];
 extern const struct hda_model_fixup cs8409_models[];
 extern const struct hda_fixup cs8409_fixups[];
-- 
2.25.1


  parent reply	other threads:[~2021-07-28 13:47 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28 13:43 [PATCH v2 00/27] ALSA: hda/cirrus: Split generic cirrus HDA codecs and CS8490 bridge into separate modules Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 01/27] ALSA: hda/cirrus: Move CS8409 HDA bridge to separate module Vitaly Rodionov
2021-07-29  9:50   ` Takashi Iwai
2021-07-28 13:43 ` [PATCH v2 02/27] ALSA: hda/cs8409: Move arrays of configuration to a new file Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 03/27] ALSA: hda/cs8409: Use enums for register names and coefficients Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 04/27] ALSA: hda/cs8409: Mask all CS42L42 interrupts on initialization Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 05/27] ALSA: hda/cs8409: Reduce HS pops/clicks for Cyborg Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 06/27] ALSA: hda/cs8409: Disable unnecessary Ring Sense for Cyborg/Warlock/Bullseye Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 07/27] ALSA: hda/cs8409: Disable unsolicited responses during suspend Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 08/27] ALSA: hda/cs8409: Disable unsolicited response for the first boot Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 09/27] ALSA: hda/cs8409: Mask CS42L42 wake events Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 10/27] ALSA: hda/cs8409: Simplify CS42L42 jack detect Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 11/27] ALSA: hda/cs8409: Prevent I2C access during suspend time Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 12/27] ALSA: hda/cs8409: Generalize volume controls Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 13/27] ALSA: hda/cs8409: Dont disable I2C clock between consecutive accesses Vitaly Rodionov
2021-07-29  9:48   ` Takashi Iwai
2021-07-28 13:43 ` [PATCH v2 14/27] ALSA: hda/cs8409: Avoid setting the same I2C address for every access Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 15/27] ALSA: hda/cs8409: Avoid re-setting the same page as the last access Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 16/27] ALSA: hda/cs8409: Support i2c bulk read/write functions Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 17/27] ALSA: hda/cs8409: Separate CS8409, CS42L42 and project functions Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 18/27] ALSA: hda/cs8409: Move codec properties to its own struct Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 19/27] ALSA: hda/cs8409: Support multiple sub_codecs for Suspend/Resume/Unsol events Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 20/27] ALSA: hda/cs8409: Add Support to disable jack type detection for CS42L42 Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 21/27] ALSA: hda/cs8409: Add support for dolphin Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 22/27] ALSA: hda/cs8409: Enable Full Scale Volume for Line Out Codec on Dolphin Vitaly Rodionov
2021-07-28 13:44 ` Vitaly Rodionov [this message]
2021-07-28 13:44 ` [PATCH v2 24/27] ALSA: hda/cs8409: Use timeout rather than retries for I2C transaction waits Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 25/27] ALSA: hda/cs8409: Remove unnecessary delays Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 26/27] ALSA: hda/cs8409: Follow correct CS42L42 power down sequence for suspend Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 27/27] ALSA: hda/cs8409: Unmute/Mute codec when stream starts/stops Vitaly Rodionov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210728134408.369396-24-vitalyr@opensource.cirrus.com \
    --to=vitalyr@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=sbinding@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).