From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/8] arm64: dts: rockchip: add rk356x gpio debounce clocks
Date: Wed, 28 Jul 2021 14:00:29 -0400 [thread overview]
Message-ID: <20210728180034.717953-4-pgwipeout@gmail.com> (raw)
In-Reply-To: <20210728180034.717953-1-pgwipeout@gmail.com>
The rk356x added a debounce clock to the gpio devices. This clock is
necessary for the new v2 gpio driver to bind.
Add the clocks to the rk356x device tree.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index f7ecdfd66f86..c2aa7aeec58d 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -750,7 +750,7 @@ gpio0: gpio@fdd60000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfdd60000 0x0 0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pmucru PCLK_GPIO0>;
+ clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -761,7 +761,7 @@ gpio1: gpio@fe740000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfe740000 0x0 0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO1>;
+ clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -772,7 +772,7 @@ gpio2: gpio@fe750000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfe750000 0x0 0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO2>;
+ clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -783,7 +783,7 @@ gpio3: gpio@fe760000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfe760000 0x0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO3>;
+ clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -794,7 +794,7 @@ gpio4: gpio@fe770000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xfe770000 0x0 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO4>;
+ clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
--
2.25.1
next prev parent reply other threads:[~2021-07-28 18:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-28 18:00 [PATCH v2 0/8] fixes and enablement for rk356x Peter Geis
2021-07-28 18:00 ` [PATCH v2 1/8] arm64: dts: rockchip: fix rk3568 mbi-alias Peter Geis
2021-07-28 18:00 ` [PATCH v2 2/8] clk: rockchip: fix clk-pll rk356x early pll init Peter Geis
2021-07-28 18:00 ` Peter Geis [this message]
2021-07-28 18:00 ` [PATCH v2 4/8] arm64: dts: rockchip: add rk356x gmac1 node Peter Geis
2021-07-28 18:00 ` [PATCH v2 5/8] arm64: dts: rockchip: add rk3568 tsadc nodes Peter Geis
2021-07-28 21:17 ` Heiko Stübner
2021-07-28 18:00 ` [PATCH v2 6/8] arm64: dts: rockchip: adjust rk3568 pll clocks Peter Geis
2021-07-28 18:00 ` [PATCH v2 7/8] arm64: dts: rockchip: enable gmac node on quartz64-a Peter Geis
2021-07-28 18:00 ` [PATCH v2 8/8] arm64: dts: rockchip: add thermal support to Quartz64 Model A Peter Geis
2021-07-29 13:19 ` (subset) [PATCH v2 0/8] fixes and enablement for rk356x Heiko Stuebner
2021-08-18 21:25 ` Heiko Stuebner
2021-08-18 21:42 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210728180034.717953-4-pgwipeout@gmail.com \
--to=pgwipeout@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).