linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v5 0/2] TCPM non-PD mode
@ 2021-07-30 12:43 Kyle Tso
  2021-07-30 12:43 ` [PATCH v5 1/2] dt-bindings: connector: Add pd-unsupported property Kyle Tso
  2021-07-30 12:43 ` [PATCH v5 2/2] usb: typec: tcpm: Support non-PD mode Kyle Tso
  0 siblings, 2 replies; 4+ messages in thread
From: Kyle Tso @ 2021-07-30 12:43 UTC (permalink / raw)
  To: linux, heikki.krogerus, gregkh, robh+dt
  Cc: badhri, linux-usb, linux-kernel, devicetree, Kyle Tso

cover-letter is the same as that in v4

The reason for this patch is to let the device/system policy decide
whether PD is going to be supported using devicetree properties.

A new dt property "pd-unsupported" is introduced and TCPM uses this
property as a flag to decide whether PD is supported. If the flag is
false (the dt property is not present), the RX functionality of the
low-level driver will not be enabled. The power negotiation related
states will be skipped as well. If the flag is true, everything is a
what it was before.

If "pd-unsupported" is present, and the port is SRC or DRP, another
existing dt property "typec-power-opmode" needs to be specified to
indicate which Rp value should be used when the port is SRC.

changes since v4:
dt-bindings: connector: Add pd-unsupported property
- Corrected the subject

usb: typec: tcpm: Support non-PD mode
- Added Reviewed-by

Kyle Tso (2):
  dt-bindings: connector: Add pd-unsupported property
  usb: typec: tcpm: Support non-PD mode

 .../bindings/connector/usb-connector.yaml     |  4 +
 drivers/usb/typec/tcpm/tcpm.c                 | 87 +++++++++++++++----
 2 files changed, 72 insertions(+), 19 deletions(-)

-- 
2.32.0.554.ge1b32706d8-goog


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v5 1/2] dt-bindings: connector: Add pd-unsupported property
  2021-07-30 12:43 [PATCH v5 0/2] TCPM non-PD mode Kyle Tso
@ 2021-07-30 12:43 ` Kyle Tso
  2021-07-30 12:43 ` [PATCH v5 2/2] usb: typec: tcpm: Support non-PD mode Kyle Tso
  1 sibling, 0 replies; 4+ messages in thread
From: Kyle Tso @ 2021-07-30 12:43 UTC (permalink / raw)
  To: linux, heikki.krogerus, gregkh, robh+dt
  Cc: badhri, linux-usb, linux-kernel, devicetree, Kyle Tso

Set "pd-unsupported" property if the Type-C connector has no power
delivery support.

Signed-off-by: Kyle Tso <kyletso@google.com>
---
Changes since v4:
- Corrected the subject

 .../devicetree/bindings/connector/usb-connector.yaml          | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 92b49bc37939..21ec470117a6 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -111,6 +111,10 @@ properties:
       - 1.5A
       - 3.0A
 
+  pd-unsupported:
+    description: Set this property if the Type-C connector has no power delivery support.
+    type: boolean
+
   # The following are optional properties for "usb-c-connector" with power
   # delivery support.
   source-pdos:
-- 
2.32.0.554.ge1b32706d8-goog


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v5 2/2] usb: typec: tcpm: Support non-PD mode
  2021-07-30 12:43 [PATCH v5 0/2] TCPM non-PD mode Kyle Tso
  2021-07-30 12:43 ` [PATCH v5 1/2] dt-bindings: connector: Add pd-unsupported property Kyle Tso
@ 2021-07-30 12:43 ` Kyle Tso
  2021-07-30 15:55   ` Heikki Krogerus
  1 sibling, 1 reply; 4+ messages in thread
From: Kyle Tso @ 2021-07-30 12:43 UTC (permalink / raw)
  To: linux, heikki.krogerus, gregkh, robh+dt
  Cc: badhri, linux-usb, linux-kernel, devicetree, Kyle Tso

Even if the Type-C controller supports PD, it is doable to disable PD
capabilities with the current state machine in TCPM. Without enabling RX
in low-level drivers and with skipping the power negotiation, the port
is eligible to be a non-PD Type-C port. Use new flags whose values are
populated from the device tree to decide the port PD capability. Adding
"pd-unsupported" property in device tree indicates that the port does
not support PD. If PD is not supported, the device tree property
"typec-power-opmode" shall be added to specify the advertised Rp value
if the port supports SRC role.

Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---
Changes since v4:
- Added Reviewed-by

 drivers/usb/typec/tcpm/tcpm.c | 87 +++++++++++++++++++++++++++--------
 1 file changed, 68 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 5b22a1c931a9..faea1bf9dce0 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -316,6 +316,7 @@ struct tcpm_port {
 	struct typec_partner *partner;
 
 	enum typec_cc_status cc_req;
+	enum typec_cc_status src_rp;	/* work only if pd_supported == false */
 
 	enum typec_cc_status cc1;
 	enum typec_cc_status cc2;
@@ -323,6 +324,7 @@ struct tcpm_port {
 
 	bool attached;
 	bool connected;
+	bool pd_supported;
 	enum typec_port_type port_type;
 
 	/*
@@ -815,6 +817,9 @@ static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port)
 	int nr_pdo = port->nr_src_pdo;
 	int i;
 
+	if (!port->pd_supported)
+		return port->src_rp;
+
 	/*
 	 * Search for first entry with matching voltage.
 	 * It should report the maximum supported current.
@@ -3568,9 +3573,11 @@ static int tcpm_src_attach(struct tcpm_port *port)
 	if (ret < 0)
 		return ret;
 
-	ret = port->tcpc->set_pd_rx(port->tcpc, true);
-	if (ret < 0)
-		goto out_disable_mux;
+	if (port->pd_supported) {
+		ret = port->tcpc->set_pd_rx(port->tcpc, true);
+		if (ret < 0)
+			goto out_disable_mux;
+	}
 
 	/*
 	 * USB Type-C specification, version 1.2,
@@ -3600,7 +3607,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
 out_disable_vconn:
 	tcpm_set_vconn(port, false);
 out_disable_pd:
-	port->tcpc->set_pd_rx(port->tcpc, false);
+	if (port->pd_supported)
+		port->tcpc->set_pd_rx(port->tcpc, false);
 out_disable_mux:
 	tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
 		     TYPEC_ORIENTATION_NONE);
@@ -3804,6 +3812,20 @@ static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
 	}
 }
 
+static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode)
+{
+	switch (opmode) {
+	case TYPEC_PWR_MODE_USB:
+		return TYPEC_CC_RP_DEF;
+	case TYPEC_PWR_MODE_1_5A:
+		return TYPEC_CC_RP_1_5;
+	case TYPEC_PWR_MODE_3_0A:
+	case TYPEC_PWR_MODE_PD:
+	default:
+		return TYPEC_CC_RP_3_0;
+	}
+}
+
 static void run_state_machine(struct tcpm_port *port)
 {
 	int ret;
@@ -3914,6 +3936,10 @@ static void run_state_machine(struct tcpm_port *port)
 		if (port->ams == POWER_ROLE_SWAP ||
 		    port->ams == FAST_ROLE_SWAP)
 			tcpm_ams_finish(port);
+		if (!port->pd_supported) {
+			tcpm_set_state(port, SRC_READY, 0);
+			break;
+		}
 		port->upcoming_state = SRC_SEND_CAPABILITIES;
 		tcpm_ams_start(port, POWER_NEGOTIATION);
 		break;
@@ -4161,7 +4187,10 @@ static void run_state_machine(struct tcpm_port *port)
 				current_lim = PD_P_SNK_STDBY_MW / 5;
 			tcpm_set_current_limit(port, current_lim, 5000);
 			tcpm_set_charge(port, true);
-			tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
+			if (!port->pd_supported)
+				tcpm_set_state(port, SNK_READY, 0);
+			else
+				tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
 			break;
 		}
 		/*
@@ -4389,7 +4418,8 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_vbus(port, true);
 		if (port->ams == HARD_RESET)
 			tcpm_ams_finish(port);
-		port->tcpc->set_pd_rx(port->tcpc, true);
+		if (port->pd_supported)
+			port->tcpc->set_pd_rx(port->tcpc, true);
 		tcpm_set_attached_state(port, true);
 		tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON);
 		break;
@@ -5898,6 +5928,7 @@ EXPORT_SYMBOL_GPL(tcpm_tcpc_reset);
 static int tcpm_fw_get_caps(struct tcpm_port *port,
 			    struct fwnode_handle *fwnode)
 {
+	const char *opmode_str;
 	const char *cap_str;
 	int ret;
 	u32 mw, frs_current;
@@ -5932,22 +5963,37 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
 		return ret;
 	port->typec_caps.type = ret;
 	port->port_type = port->typec_caps.type;
+	port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-unsupported");
 
 	port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop");
 	if (port->port_type == TYPEC_PORT_SNK)
 		goto sink;
 
-	/* Get source pdos */
-	ret = fwnode_property_count_u32(fwnode, "source-pdos");
-	if (ret <= 0)
-		return -EINVAL;
+	/* Get Source PDOs for the PD port or Source Rp value for the non-PD port */
+	if (port->pd_supported) {
+		ret = fwnode_property_count_u32(fwnode, "source-pdos");
+		if (ret == 0)
+			return -EINVAL;
+		else if (ret < 0)
+			return ret;
 
-	port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
-	ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
-					     port->src_pdo, port->nr_src_pdo);
-	if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo,
-					    port->nr_src_pdo))
-		return -EINVAL;
+		port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
+		ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
+						     port->src_pdo, port->nr_src_pdo);
+		if (ret)
+			return ret;
+		ret = tcpm_validate_caps(port, port->src_pdo, port->nr_src_pdo);
+		if (ret)
+			return ret;
+	} else {
+		ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str);
+		if (ret)
+			return ret;
+		ret = typec_find_pwr_opmode(opmode_str);
+		if (ret < 0)
+			return ret;
+		port->src_rp = tcpm_pwr_opmode_to_rp(ret);
+	}
 
 	if (port->port_type == TYPEC_PORT_SRC)
 		return 0;
@@ -5961,6 +6007,11 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
 	if (port->typec_caps.prefer_role < 0)
 		return -EINVAL;
 sink:
+	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
+
+	if (!port->pd_supported)
+		return 0;
+
 	/* Get sink pdos */
 	ret = fwnode_property_count_u32(fwnode, "sink-pdos");
 	if (ret <= 0)
@@ -5977,9 +6028,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
 		return -EINVAL;
 	port->operating_snk_mw = mw / 1000;
 
-	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
-
-	/* FRS can only be supported byb DRP ports */
+	/* FRS can only be supported by DRP ports */
 	if (port->port_type == TYPEC_PORT_DRP) {
 		ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current",
 					       &frs_current);
-- 
2.32.0.554.ge1b32706d8-goog


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v5 2/2] usb: typec: tcpm: Support non-PD mode
  2021-07-30 12:43 ` [PATCH v5 2/2] usb: typec: tcpm: Support non-PD mode Kyle Tso
@ 2021-07-30 15:55   ` Heikki Krogerus
  0 siblings, 0 replies; 4+ messages in thread
From: Heikki Krogerus @ 2021-07-30 15:55 UTC (permalink / raw)
  To: Kyle Tso
  Cc: linux, gregkh, robh+dt, badhri, linux-usb, linux-kernel, devicetree

Fri, Jul 30, 2021 at 08:43:48PM +0800, Kyle Tso kirjoitti:
> Even if the Type-C controller supports PD, it is doable to disable PD
> capabilities with the current state machine in TCPM. Without enabling RX
> in low-level drivers and with skipping the power negotiation, the port
> is eligible to be a non-PD Type-C port. Use new flags whose values are
> populated from the device tree to decide the port PD capability. Adding
> "pd-unsupported" property in device tree indicates that the port does
> not support PD. If PD is not supported, the device tree property
> "typec-power-opmode" shall be added to specify the advertised Rp value
> if the port supports SRC role.
> 
> Signed-off-by: Kyle Tso <kyletso@google.com>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
> Changes since v4:
> - Added Reviewed-by
> 
>  drivers/usb/typec/tcpm/tcpm.c | 87 +++++++++++++++++++++++++++--------
>  1 file changed, 68 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 5b22a1c931a9..faea1bf9dce0 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -316,6 +316,7 @@ struct tcpm_port {
>  	struct typec_partner *partner;
>  
>  	enum typec_cc_status cc_req;
> +	enum typec_cc_status src_rp;	/* work only if pd_supported == false */
>  
>  	enum typec_cc_status cc1;
>  	enum typec_cc_status cc2;
> @@ -323,6 +324,7 @@ struct tcpm_port {
>  
>  	bool attached;
>  	bool connected;
> +	bool pd_supported;
>  	enum typec_port_type port_type;
>  
>  	/*
> @@ -815,6 +817,9 @@ static enum typec_cc_status tcpm_rp_cc(struct tcpm_port *port)
>  	int nr_pdo = port->nr_src_pdo;
>  	int i;
>  
> +	if (!port->pd_supported)
> +		return port->src_rp;
> +
>  	/*
>  	 * Search for first entry with matching voltage.
>  	 * It should report the maximum supported current.
> @@ -3568,9 +3573,11 @@ static int tcpm_src_attach(struct tcpm_port *port)
>  	if (ret < 0)
>  		return ret;
>  
> -	ret = port->tcpc->set_pd_rx(port->tcpc, true);
> -	if (ret < 0)
> -		goto out_disable_mux;
> +	if (port->pd_supported) {
> +		ret = port->tcpc->set_pd_rx(port->tcpc, true);
> +		if (ret < 0)
> +			goto out_disable_mux;
> +	}
>  
>  	/*
>  	 * USB Type-C specification, version 1.2,
> @@ -3600,7 +3607,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
>  out_disable_vconn:
>  	tcpm_set_vconn(port, false);
>  out_disable_pd:
> -	port->tcpc->set_pd_rx(port->tcpc, false);
> +	if (port->pd_supported)
> +		port->tcpc->set_pd_rx(port->tcpc, false);
>  out_disable_mux:
>  	tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
>  		     TYPEC_ORIENTATION_NONE);
> @@ -3804,6 +3812,20 @@ static enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
>  	}
>  }
>  
> +static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode)
> +{
> +	switch (opmode) {
> +	case TYPEC_PWR_MODE_USB:
> +		return TYPEC_CC_RP_DEF;
> +	case TYPEC_PWR_MODE_1_5A:
> +		return TYPEC_CC_RP_1_5;
> +	case TYPEC_PWR_MODE_3_0A:
> +	case TYPEC_PWR_MODE_PD:
> +	default:
> +		return TYPEC_CC_RP_3_0;
> +	}
> +}
> +
>  static void run_state_machine(struct tcpm_port *port)
>  {
>  	int ret;
> @@ -3914,6 +3936,10 @@ static void run_state_machine(struct tcpm_port *port)
>  		if (port->ams == POWER_ROLE_SWAP ||
>  		    port->ams == FAST_ROLE_SWAP)
>  			tcpm_ams_finish(port);
> +		if (!port->pd_supported) {
> +			tcpm_set_state(port, SRC_READY, 0);
> +			break;
> +		}
>  		port->upcoming_state = SRC_SEND_CAPABILITIES;
>  		tcpm_ams_start(port, POWER_NEGOTIATION);
>  		break;
> @@ -4161,7 +4187,10 @@ static void run_state_machine(struct tcpm_port *port)
>  				current_lim = PD_P_SNK_STDBY_MW / 5;
>  			tcpm_set_current_limit(port, current_lim, 5000);
>  			tcpm_set_charge(port, true);
> -			tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
> +			if (!port->pd_supported)
> +				tcpm_set_state(port, SNK_READY, 0);
> +			else
> +				tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
>  			break;
>  		}
>  		/*
> @@ -4389,7 +4418,8 @@ static void run_state_machine(struct tcpm_port *port)
>  		tcpm_set_vbus(port, true);
>  		if (port->ams == HARD_RESET)
>  			tcpm_ams_finish(port);
> -		port->tcpc->set_pd_rx(port->tcpc, true);
> +		if (port->pd_supported)
> +			port->tcpc->set_pd_rx(port->tcpc, true);
>  		tcpm_set_attached_state(port, true);
>  		tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON);
>  		break;
> @@ -5898,6 +5928,7 @@ EXPORT_SYMBOL_GPL(tcpm_tcpc_reset);
>  static int tcpm_fw_get_caps(struct tcpm_port *port,
>  			    struct fwnode_handle *fwnode)
>  {
> +	const char *opmode_str;
>  	const char *cap_str;
>  	int ret;
>  	u32 mw, frs_current;
> @@ -5932,22 +5963,37 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>  		return ret;
>  	port->typec_caps.type = ret;
>  	port->port_type = port->typec_caps.type;
> +	port->pd_supported = !fwnode_property_read_bool(fwnode, "pd-unsupported");
>  
>  	port->slow_charger_loop = fwnode_property_read_bool(fwnode, "slow-charger-loop");
>  	if (port->port_type == TYPEC_PORT_SNK)
>  		goto sink;
>  
> -	/* Get source pdos */
> -	ret = fwnode_property_count_u32(fwnode, "source-pdos");
> -	if (ret <= 0)
> -		return -EINVAL;
> +	/* Get Source PDOs for the PD port or Source Rp value for the non-PD port */
> +	if (port->pd_supported) {
> +		ret = fwnode_property_count_u32(fwnode, "source-pdos");
> +		if (ret == 0)
> +			return -EINVAL;
> +		else if (ret < 0)
> +			return ret;
>  
> -	port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
> -	ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> -					     port->src_pdo, port->nr_src_pdo);
> -	if ((ret < 0) || tcpm_validate_caps(port, port->src_pdo,
> -					    port->nr_src_pdo))
> -		return -EINVAL;
> +		port->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
> +		ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> +						     port->src_pdo, port->nr_src_pdo);
> +		if (ret)
> +			return ret;
> +		ret = tcpm_validate_caps(port, port->src_pdo, port->nr_src_pdo);
> +		if (ret)
> +			return ret;
> +	} else {
> +		ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &opmode_str);
> +		if (ret)
> +			return ret;
> +		ret = typec_find_pwr_opmode(opmode_str);
> +		if (ret < 0)
> +			return ret;
> +		port->src_rp = tcpm_pwr_opmode_to_rp(ret);
> +	}
>  
>  	if (port->port_type == TYPEC_PORT_SRC)
>  		return 0;
> @@ -5961,6 +6007,11 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>  	if (port->typec_caps.prefer_role < 0)
>  		return -EINVAL;
>  sink:
> +	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
> +
> +	if (!port->pd_supported)
> +		return 0;
> +
>  	/* Get sink pdos */
>  	ret = fwnode_property_count_u32(fwnode, "sink-pdos");
>  	if (ret <= 0)
> @@ -5977,9 +6028,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>  		return -EINVAL;
>  	port->operating_snk_mw = mw / 1000;
>  
> -	port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
> -
> -	/* FRS can only be supported byb DRP ports */
> +	/* FRS can only be supported by DRP ports */
>  	if (port->port_type == TYPEC_PORT_DRP) {
>  		ret = fwnode_property_read_u32(fwnode, "new-source-frs-typec-current",
>  					       &frs_current);
> -- 
> 2.32.0.554.ge1b32706d8-goog

-- 
heikki

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2021-07-30 15:55 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-30 12:43 [PATCH v5 0/2] TCPM non-PD mode Kyle Tso
2021-07-30 12:43 ` [PATCH v5 1/2] dt-bindings: connector: Add pd-unsupported property Kyle Tso
2021-07-30 12:43 ` [PATCH v5 2/2] usb: typec: tcpm: Support non-PD mode Kyle Tso
2021-07-30 15:55   ` Heikki Krogerus

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).