* [PATCH] dt-bindings: eeprom-93xx46: Convert to json schema\
@ 2021-08-10 6:48 Aswath Govindraju
2021-08-17 19:46 ` Rob Herring
0 siblings, 1 reply; 3+ messages in thread
From: Aswath Govindraju @ 2021-08-10 6:48 UTC (permalink / raw)
Cc: Lokesh Vutla, Aswath Govindraju, Rob Herring, Greg Kroah-Hartman,
Emmanuel Gil Peyrot, Cory Tusar, devicetree, linux-kernel
Convert eeprom-93xx46 binding documentation from txt to yaml format
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
Device tree fixes required are posted in the following patch,
https://lore.kernel.org/patchwork/project/lkml/list/?series=511477
.../bindings/misc/eeprom-93xx46.txt | 29 --------
.../bindings/misc/eeprom-93xx46.yaml | 72 +++++++++++++++++++
2 files changed, 72 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
create mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
deleted file mode 100644
index 72ea0af368d4..000000000000
--- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
-
-Required properties:
-- compatible : shall be one of:
- "atmel,at93c46"
- "atmel,at93c46d"
- "atmel,at93c56"
- "atmel,at93c66"
- "eeprom-93xx46"
- "microchip,93lc46b"
-- data-size : number of data bits per word (either 8 or 16)
-
-Optional properties:
-- read-only : parameter-less property which disables writes to the EEPROM
-- select-gpios : if present, specifies the GPIO that will be asserted prior to
- each access to the EEPROM (e.g. for SPI bus multiplexing)
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply. In particular, "reg" and "spi-max-frequency" properties must be given.
-
-Example:
- eeprom@0 {
- compatible = "eeprom-93xx46";
- reg = <0>;
- spi-max-frequency = <1000000>;
- spi-cs-high;
- data-size = <8>;
- select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
- };
diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
new file mode 100644
index 000000000000..4254a7be5a70
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
+
+maintainers:
+ - Cory Tusar <cory.tusar@pid1solutions.com>
+
+properties:
+ $nodename:
+ pattern: "@[0-9]+$"
+
+ compatible:
+ enum:
+ - atmel,at93c46
+ - atmel,at93c46d
+ - atmel,at93c56
+ - atmel,at93c66
+ - eeprom-93xx46
+ - microchip,93lc46b
+
+ data-size:
+ description: number of data bits per word
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [8, 16]
+
+ reg:
+ description: chip select of EEPROM
+ maxItems: 1
+
+ spi-max-frequency: true
+ spi-cs-high: true
+
+ read-only:
+ description:
+ parameter-less property which disables writes to the EEPROM
+
+ select-gpios:
+ description:
+ specifies the GPIO that needs to be asserted prior to each access
+ of EEPROM (e.g. for SPI bus multiplexing)
+ maxItems: 1
+
+
+required:
+ - compatible
+ - reg
+ - data-size
+ - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "eeprom-93xx46";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cs-high;
+ data-size = <8>;
+ select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] dt-bindings: eeprom-93xx46: Convert to json schema\
2021-08-10 6:48 [PATCH] dt-bindings: eeprom-93xx46: Convert to json schema\ Aswath Govindraju
@ 2021-08-17 19:46 ` Rob Herring
2021-08-18 10:59 ` Aswath Govindraju
0 siblings, 1 reply; 3+ messages in thread
From: Rob Herring @ 2021-08-17 19:46 UTC (permalink / raw)
To: Aswath Govindraju
Cc: Lokesh Vutla, Greg Kroah-Hartman, Emmanuel Gil Peyrot,
Cory Tusar, devicetree, linux-kernel
On Tue, Aug 10, 2021 at 12:18:59PM +0530, Aswath Govindraju wrote:
> Convert eeprom-93xx46 binding documentation from txt to yaml format
Drop the trailing '\' in the subject.
>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> ---
>
> Device tree fixes required are posted in the following patch,
> https://lore.kernel.org/patchwork/project/lkml/list/?series=511477
>
>
> .../bindings/misc/eeprom-93xx46.txt | 29 --------
> .../bindings/misc/eeprom-93xx46.yaml | 72 +++++++++++++++++++
> 2 files changed, 72 insertions(+), 29 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
> create mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
>
> diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
> deleted file mode 100644
> index 72ea0af368d4..000000000000
> --- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
> -
> -Required properties:
> -- compatible : shall be one of:
> - "atmel,at93c46"
> - "atmel,at93c46d"
> - "atmel,at93c56"
> - "atmel,at93c66"
> - "eeprom-93xx46"
> - "microchip,93lc46b"
> -- data-size : number of data bits per word (either 8 or 16)
> -
> -Optional properties:
> -- read-only : parameter-less property which disables writes to the EEPROM
> -- select-gpios : if present, specifies the GPIO that will be asserted prior to
> - each access to the EEPROM (e.g. for SPI bus multiplexing)
> -
> -Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
> -apply. In particular, "reg" and "spi-max-frequency" properties must be given.
> -
> -Example:
> - eeprom@0 {
> - compatible = "eeprom-93xx46";
> - reg = <0>;
> - spi-max-frequency = <1000000>;
> - spi-cs-high;
> - data-size = <8>;
> - select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
> - };
> diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
> new file mode 100644
> index 000000000000..4254a7be5a70
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
> +
> +maintainers:
> + - Cory Tusar <cory.tusar@pid1solutions.com>
> +
> +properties:
> + $nodename:
> + pattern: "@[0-9]+$"
Unless you want to define 'eeprom' as the correct node name, there's no
point in this. The unit address is checked by the spi bus schema and
it's also wrong here being decimal.
> +
> + compatible:
> + enum:
> + - atmel,at93c46
> + - atmel,at93c46d
> + - atmel,at93c56
> + - atmel,at93c66
> + - eeprom-93xx46
> + - microchip,93lc46b
> +
> + data-size:
> + description: number of data bits per word
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [8, 16]
> +
> + reg:
> + description: chip select of EEPROM
> + maxItems: 1
> +
> + spi-max-frequency: true
> + spi-cs-high: true
> +
> + read-only:
> + description:
> + parameter-less property which disables writes to the EEPROM
type: boolean.
> +
> + select-gpios:
> + description:
> + specifies the GPIO that needs to be asserted prior to each access
> + of EEPROM (e.g. for SPI bus multiplexing)
> + maxItems: 1
> +
> +
> +required:
> + - compatible
> + - reg
> + - data-size
> + - spi-max-frequency
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + spi0 {
spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + eeprom@0 {
> + compatible = "eeprom-93xx46";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + spi-cs-high;
> + data-size = <8>;
> + select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
> + };
> + };
> --
> 2.17.1
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] dt-bindings: eeprom-93xx46: Convert to json schema\
2021-08-17 19:46 ` Rob Herring
@ 2021-08-18 10:59 ` Aswath Govindraju
0 siblings, 0 replies; 3+ messages in thread
From: Aswath Govindraju @ 2021-08-18 10:59 UTC (permalink / raw)
To: Rob Herring
Cc: Lokesh Vutla, Greg Kroah-Hartman, Emmanuel Gil Peyrot,
Cory Tusar, devicetree, linux-kernel
Hi Rob,
On 18/08/21 1:16 am, Rob Herring wrote:
> On Tue, Aug 10, 2021 at 12:18:59PM +0530, Aswath Govindraju wrote:
>> Convert eeprom-93xx46 binding documentation from txt to yaml format
>
> Drop the trailing '\' in the subject.
>
>>
>> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
>> ---
>>
>> Device tree fixes required are posted in the following patch,
>> https://lore.kernel.org/patchwork/project/lkml/list/?series=511477
>>
Thank you for review comments. I have made the required corrections and
posted v2[1] for this patch.
[1] - https://lore.kernel.org/patchwork/project/lkml/list/?series=512773
Thanks,
Aswath
>>
>> .../bindings/misc/eeprom-93xx46.txt | 29 --------
>> .../bindings/misc/eeprom-93xx46.yaml | 72 +++++++++++++++++++
>> 2 files changed, 72 insertions(+), 29 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
>> create mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
>> deleted file mode 100644
>> index 72ea0af368d4..000000000000
>> --- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
>> +++ /dev/null
>> @@ -1,29 +0,0 @@
>> -EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
>> -
>> -Required properties:
>> -- compatible : shall be one of:
>> - "atmel,at93c46"
>> - "atmel,at93c46d"
>> - "atmel,at93c56"
>> - "atmel,at93c66"
>> - "eeprom-93xx46"
>> - "microchip,93lc46b"
>> -- data-size : number of data bits per word (either 8 or 16)
>> -
>> -Optional properties:
>> -- read-only : parameter-less property which disables writes to the EEPROM
>> -- select-gpios : if present, specifies the GPIO that will be asserted prior to
>> - each access to the EEPROM (e.g. for SPI bus multiplexing)
>> -
>> -Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
>> -apply. In particular, "reg" and "spi-max-frequency" properties must be given.
>> -
>> -Example:
>> - eeprom@0 {
>> - compatible = "eeprom-93xx46";
>> - reg = <0>;
>> - spi-max-frequency = <1000000>;
>> - spi-cs-high;
>> - data-size = <8>;
>> - select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
>> - };
>> diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
>> new file mode 100644
>> index 000000000000..4254a7be5a70
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
>> @@ -0,0 +1,72 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
>> +
>> +maintainers:
>> + - Cory Tusar <cory.tusar@pid1solutions.com>
>> +
>> +properties:
>> + $nodename:
>> + pattern: "@[0-9]+$"
>
> Unless you want to define 'eeprom' as the correct node name, there's no
> point in this. The unit address is checked by the spi bus schema and
> it's also wrong here being decimal.
>
>> +
>> + compatible:
>> + enum:
>> + - atmel,at93c46
>> + - atmel,at93c46d
>> + - atmel,at93c56
>> + - atmel,at93c66
>> + - eeprom-93xx46
>> + - microchip,93lc46b
>> +
>> + data-size:
>> + description: number of data bits per word
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [8, 16]
>> +
>> + reg:
>> + description: chip select of EEPROM
>> + maxItems: 1
>> +
>> + spi-max-frequency: true
>> + spi-cs-high: true
>> +
>> + read-only:
>> + description:
>> + parameter-less property which disables writes to the EEPROM
>
> type: boolean.
>
>
>> +
>> + select-gpios:
>> + description:
>> + specifies the GPIO that needs to be asserted prior to each access
>> + of EEPROM (e.g. for SPI bus multiplexing)
>> + maxItems: 1
>> +
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - data-size
>> + - spi-max-frequency
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/gpio/gpio.h>
>> +
>> + spi0 {
>
> spi {
>
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + eeprom@0 {
>> + compatible = "eeprom-93xx46";
>> + reg = <0>;
>> + spi-max-frequency = <1000000>;
>> + spi-cs-high;
>> + data-size = <8>;
>> + select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
>> + };
>> + };
>> --
>> 2.17.1
>>
>>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-08-18 10:59 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-10 6:48 [PATCH] dt-bindings: eeprom-93xx46: Convert to json schema\ Aswath Govindraju
2021-08-17 19:46 ` Rob Herring
2021-08-18 10:59 ` Aswath Govindraju
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).