[PATCH v3 2/6] drm/vc4: hdmi: Make sure the controller is powered up during bind

[Maxime Ripard <maxime@cerno.tech>]

In the bind hook, we actually need the device to have the HSM clock
running during the final part of the display initialisation where we
reset the controller and initialise the CEC component.

Failing to do so will result in a complete, silent, hang of the CPU.

Fixes: 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 602203b2d8e1..5dde3e5c1d7f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -2191,6 +2191,18 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 			vc4_hdmi->disable_4kp60 = true;
 	}
 
+	/*
+	 * We need to have the device powered up at this point to call
+	 * our reset hook and for the CEC init.
+	 */
+	ret = vc4_hdmi_runtime_resume(dev);
+	if (ret)
+		goto err_put_ddc;
+
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	if (vc4_hdmi->variant->reset)
 		vc4_hdmi->variant->reset(vc4_hdmi);
 
@@ -2202,8 +2214,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 		clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
 	}
 
-	pm_runtime_enable(dev);
-
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(encoder, &vc4_hdmi_encoder_helper_funcs);
 
@@ -2223,6 +2233,8 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 			     vc4_hdmi_debugfs_regs,
 			     vc4_hdmi);
 
+	pm_runtime_put_sync(dev);
+
 	return 0;
 
 err_free_cec:
@@ -2231,6 +2243,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	vc4_hdmi_connector_destroy(&vc4_hdmi->connector);
 err_destroy_encoder:
 	drm_encoder_cleanup(encoder);
+	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 err_put_ddc:
 	put_device(&vc4_hdmi->ddc->dev);
-- 
2.31.1