linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
	<robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
	<p.zabel@pengutronix.de>, <lgirdwood@gmail.com>,
	<broonie@kernel.org>, <linux-iio@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [RESEND v4 04/15] iio: adc: aspeed: Keep model data to driver data.
Date: Tue, 24 Aug 2021 17:12:32 +0800	[thread overview]
Message-ID: <20210824091243.9393-5-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20210824091243.9393-1-billy_tsai@aspeedtech.com>

Keep the model data pointer to driver data for reducing the usage of
of_device_get_match_data().

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/iio/adc/aspeed_adc.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 20462cf659e4..d85aa31ee3b1 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -69,6 +69,7 @@ struct aspeed_adc_model_data {
 
 struct aspeed_adc_data {
 	struct device		*dev;
+	const struct aspeed_adc_model_data *model_data;
 	void __iomem		*base;
 	spinlock_t		clk_lock;
 	struct clk_hw		*clk_prescaler;
@@ -110,8 +111,6 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
 			       int *val, int *val2, long mask)
 {
 	struct aspeed_adc_data *data = iio_priv(indio_dev);
-	const struct aspeed_adc_model_data *model_data =
-			of_device_get_match_data(data->dev);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
@@ -119,7 +118,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SCALE:
-		*val = model_data->vref_voltage;
+		*val = data->model_data->vref_voltage;
 		*val2 = ASPEED_RESOLUTION_BITS;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
@@ -138,13 +137,11 @@ static int aspeed_adc_write_raw(struct iio_dev *indio_dev,
 				int val, int val2, long mask)
 {
 	struct aspeed_adc_data *data = iio_priv(indio_dev);
-	const struct aspeed_adc_model_data *model_data =
-			of_device_get_match_data(data->dev);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		if (val < model_data->min_sampling_rate ||
-			val > model_data->max_sampling_rate)
+		if (val < data->model_data->min_sampling_rate ||
+			val > data->model_data->max_sampling_rate)
 			return -EINVAL;
 
 		clk_set_rate(data->clk_scaler->clk,
@@ -190,7 +187,6 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
 	struct aspeed_adc_data *data;
-	const struct aspeed_adc_model_data *model_data;
 	const char *clk_parent_name;
 	int ret;
 	u32 adc_engine_control_reg_val;
@@ -201,6 +197,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 
 	data = iio_priv(indio_dev);
 	data->dev = &pdev->dev;
+	data->model_data = of_device_get_match_data(&pdev->dev);
 	platform_set_drvdata(pdev, indio_dev);
 
 	data->base = devm_platform_ioremap_resource(pdev, 0);
@@ -241,9 +238,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	}
 	reset_control_deassert(data->rst);
 
-	model_data = of_device_get_match_data(&pdev->dev);
-
-	if (model_data->wait_init_sequence) {
+	if (data->model_data->wait_init_sequence) {
 		/* Enable engine in normal mode. */
 		writel(FIELD_PREP(ASPEED_ADC_OP_MODE,
 				  ASPEED_ADC_OP_MODE_NORMAL) |
@@ -273,8 +268,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	writel(adc_engine_control_reg_val,
 	       data->base + ASPEED_REG_ENGINE_CONTROL);
 
-	model_data = of_device_get_match_data(&pdev->dev);
-	indio_dev->name = model_data->model_name;
+	indio_dev->name = data->model_data->model_name;
 	indio_dev->info = &aspeed_adc_iio_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = aspeed_adc_iio_channels;
-- 
2.25.1


  parent reply	other threads:[~2021-08-24  9:14 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-24  9:12 [RESEND v4 00/15] Add support for ast2600 ADC Billy Tsai
2021-08-24  9:12 ` [RESEND v4 01/15] dt-bindings: iio: adc: Add ast2600-adc bindings Billy Tsai
2021-08-24  9:12 ` [RESEND v4 02/15] iio: adc: aspeed: completes the bitfield declare Billy Tsai
2021-08-29 15:07   ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 03/15] iio: adc: aspeed: set driver data when adc probe Billy Tsai
2021-08-29 15:08   ` Jonathan Cameron
2021-08-24  9:12 ` Billy Tsai [this message]
2021-08-24  9:12 ` [RESEND v4 05/15] iio: adc: aspeed: Refactory model data structure Billy Tsai
2021-08-29 15:13   ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 06/15] iio: adc: aspeed: Add vref config function Billy Tsai
2021-08-24  9:12 ` [RESEND v4 07/15] iio: adc: aspeed: Set num_channels with model data Billy Tsai
2021-08-24  9:12 ` [RESEND v4 08/15] iio: adc: aspeed: Use model_data to set clk scaler Billy Tsai
2021-08-24  9:12 ` [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 10/15] iio: adc: aspeed: Support ast2600 adc Billy Tsai
2021-08-29 15:31   ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 11/15] iio: adc: aspeed: Fix the calculate error of clock Billy Tsai
2021-08-29 15:33   ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 12/15] iio: adc: aspeed: Add func to set sampling rate Billy Tsai
2021-08-24  9:12 ` [RESEND v4 13/15] iio: adc: aspeed: Add compensation phase Billy Tsai
2021-08-24  9:12 ` [RESEND v4 14/15] iio: adc: aspeed: Support battery sensing Billy Tsai
2021-08-24  9:12 ` [RESEND v4 15/15] iio: adc: aspeed: Get and set trimming data Billy Tsai
     [not found] ` <202108250006.17P06IgG097015@twspam01.aspeedtech.com>
2021-08-29 15:20   ` [RESEND v4 08/15] iio: adc: aspeed: Use model_data to set clk scaler Jonathan Cameron
     [not found] ` <202108250004.17P04FdD094082@twspam01.aspeedtech.com>
2021-08-29 15:25   ` [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Jonathan Cameron
     [not found] ` <202108250003.17P03KRU092474@twspam01.aspeedtech.com>
2021-08-29 15:36   ` [RESEND v4 12/15] iio: adc: aspeed: Add func to set sampling rate Jonathan Cameron
2021-08-30  8:35     ` Billy Tsai
2021-08-30  9:52       ` Jonathan Cameron
     [not found] ` <202108250006.17P066YP096721@twspam01.aspeedtech.com>
2021-08-29 15:39   ` [RESEND v4 13/15] iio: adc: aspeed: Add compensation phase Jonathan Cameron
     [not found] ` <202108250005.17P05agj096445@twspam01.aspeedtech.com>
2021-08-29 15:43   ` [RESEND v4 14/15] iio: adc: aspeed: Support battery sensing Jonathan Cameron
     [not found] ` <202108250007.17P07NFj097422@twspam01.aspeedtech.com>
2021-08-29 15:45   ` [RESEND v4 15/15] iio: adc: aspeed: Get and set trimming data Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210824091243.9393-5-billy_tsai@aspeedtech.com \
    --to=billy_tsai@aspeedtech.com \
    --cc=BMC-SW@aspeedtech.com \
    --cc=andrew@aj.id.au \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=joel@jms.id.au \
    --cc=lars@metafoo.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).