From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
<robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
<p.zabel@pengutronix.de>, <lgirdwood@gmail.com>,
<broonie@kernel.org>, <linux-iio@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [RESEND v4 05/15] iio: adc: aspeed: Refactory model data structure
Date: Tue, 24 Aug 2021 17:12:33 +0800 [thread overview]
Message-ID: <20210824091243.9393-6-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20210824091243.9393-1-billy_tsai@aspeedtech.com>
This patch refactory the model data structure to distinguish the
function form differnet version of aspeed adc.
- Rename the vref_voltag to vref_fixed and add vref driver data
When driver probe will check vref_fixed value and store it
to vref which isn't const value.
- Add num_channels
Make num_channles of iio device can be changed by differnet model_data
- Add need_prescaler flag and scaler_bit_width
The need_prescaler flag used to tell the driver the clock divider needs
another prescaler and the scaler_bit_width to set the clock divider
bitfiled width.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
drivers/iio/adc/aspeed_adc.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index d85aa31ee3b1..f03c7921d534 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -63,8 +63,11 @@ struct aspeed_adc_model_data {
const char *model_name;
unsigned int min_sampling_rate; // Hz
unsigned int max_sampling_rate; // Hz
- unsigned int vref_voltage; // mV
+ unsigned int vref_fixed; // mV
bool wait_init_sequence;
+ bool need_prescaler;
+ u8 scaler_bit_width;
+ unsigned int num_channels;
};
struct aspeed_adc_data {
@@ -75,6 +78,7 @@ struct aspeed_adc_data {
struct clk_hw *clk_prescaler;
struct clk_hw *clk_scaler;
struct reset_control *rst;
+ int vref;
};
#define ASPEED_CHAN(_idx, _data_reg_addr) { \
@@ -118,7 +122,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
- *val = data->model_data->vref_voltage;
+ *val = data->model_data->vref_fixed;
*val2 = ASPEED_RESOLUTION_BITS;
return IIO_VAL_FRACTIONAL_LOG2;
@@ -312,17 +316,23 @@ static int aspeed_adc_remove(struct platform_device *pdev)
static const struct aspeed_adc_model_data ast2400_model_data = {
.model_name = "ast2400-adc",
- .vref_voltage = 2500, // mV
+ .vref_fixed = 2500, // mV
.min_sampling_rate = 10000,
.max_sampling_rate = 500000,
+ .need_prescaler = true,
+ .scaler_bit_width = 10,
+ .num_channels = 16,
};
static const struct aspeed_adc_model_data ast2500_model_data = {
.model_name = "ast2500-adc",
- .vref_voltage = 1800, // mV
+ .vref_fixed = 1800, // mV
.min_sampling_rate = 1,
.max_sampling_rate = 1000000,
.wait_init_sequence = true,
+ .need_prescaler = true,
+ .scaler_bit_width = 10,
+ .num_channels = 16,
};
static const struct of_device_id aspeed_adc_matches[] = {
--
2.25.1
next prev parent reply other threads:[~2021-08-24 9:14 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-24 9:12 [RESEND v4 00/15] Add support for ast2600 ADC Billy Tsai
2021-08-24 9:12 ` [RESEND v4 01/15] dt-bindings: iio: adc: Add ast2600-adc bindings Billy Tsai
2021-08-24 9:12 ` [RESEND v4 02/15] iio: adc: aspeed: completes the bitfield declare Billy Tsai
2021-08-29 15:07 ` Jonathan Cameron
2021-08-24 9:12 ` [RESEND v4 03/15] iio: adc: aspeed: set driver data when adc probe Billy Tsai
2021-08-29 15:08 ` Jonathan Cameron
2021-08-24 9:12 ` [RESEND v4 04/15] iio: adc: aspeed: Keep model data to driver data Billy Tsai
2021-08-24 9:12 ` Billy Tsai [this message]
2021-08-29 15:13 ` [RESEND v4 05/15] iio: adc: aspeed: Refactory model data structure Jonathan Cameron
2021-08-24 9:12 ` [RESEND v4 06/15] iio: adc: aspeed: Add vref config function Billy Tsai
2021-08-24 9:12 ` [RESEND v4 07/15] iio: adc: aspeed: Set num_channels with model data Billy Tsai
2021-08-24 9:12 ` [RESEND v4 08/15] iio: adc: aspeed: Use model_data to set clk scaler Billy Tsai
2021-08-24 9:12 ` [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Billy Tsai
2021-08-24 9:12 ` Billy Tsai
2021-08-24 9:12 ` [RESEND v4 10/15] iio: adc: aspeed: Support ast2600 adc Billy Tsai
2021-08-29 15:31 ` Jonathan Cameron
2021-08-24 9:12 ` [RESEND v4 11/15] iio: adc: aspeed: Fix the calculate error of clock Billy Tsai
2021-08-29 15:33 ` Jonathan Cameron
2021-08-24 9:12 ` [RESEND v4 12/15] iio: adc: aspeed: Add func to set sampling rate Billy Tsai
2021-08-24 9:12 ` [RESEND v4 13/15] iio: adc: aspeed: Add compensation phase Billy Tsai
2021-08-24 9:12 ` [RESEND v4 14/15] iio: adc: aspeed: Support battery sensing Billy Tsai
2021-08-24 9:12 ` [RESEND v4 15/15] iio: adc: aspeed: Get and set trimming data Billy Tsai
[not found] ` <202108250006.17P06IgG097015@twspam01.aspeedtech.com>
2021-08-29 15:20 ` [RESEND v4 08/15] iio: adc: aspeed: Use model_data to set clk scaler Jonathan Cameron
[not found] ` <202108250004.17P04FdD094082@twspam01.aspeedtech.com>
2021-08-29 15:25 ` [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Jonathan Cameron
[not found] ` <202108250003.17P03KRU092474@twspam01.aspeedtech.com>
2021-08-29 15:36 ` [RESEND v4 12/15] iio: adc: aspeed: Add func to set sampling rate Jonathan Cameron
2021-08-30 8:35 ` Billy Tsai
2021-08-30 9:52 ` Jonathan Cameron
[not found] ` <202108250006.17P066YP096721@twspam01.aspeedtech.com>
2021-08-29 15:39 ` [RESEND v4 13/15] iio: adc: aspeed: Add compensation phase Jonathan Cameron
[not found] ` <202108250005.17P05agj096445@twspam01.aspeedtech.com>
2021-08-29 15:43 ` [RESEND v4 14/15] iio: adc: aspeed: Support battery sensing Jonathan Cameron
[not found] ` <202108250007.17P07NFj097422@twspam01.aspeedtech.com>
2021-08-29 15:45 ` [RESEND v4 15/15] iio: adc: aspeed: Get and set trimming data Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210824091243.9393-6-billy_tsai@aspeedtech.com \
--to=billy_tsai@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=andrew@aj.id.au \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).