[PATCH AUTOSEL 4.4 1/2] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation

[PATCH AUTOSEL 4.4 1/2] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation

[Sasha Levin]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ]

"PAGESIZE / 512" is the number of ECC chunks.
"ECC_BYTES" is the number of bytes needed to store a single ECC code.
"2" is the space reserved by the bad block marker.

"2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal
than the total number of OOB bytes, otherwise it won't fit.

Fix the equation by substituting s/>=/<=/.

Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index fb733c4e1c11..3a58fdf0c566 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -112,7 +112,7 @@ on various other factors also like;
 	so the device should have enough free bytes available its OOB/Spare
 	area to accommodate ECC for entire page. In general following expression
 	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
+	"2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
 		PAGESIZE	number of bytes in main-area of device page
-- 
2.30.2

[PATCH AUTOSEL 4.4 2/2] ethtool: Fix an error code in cxgb2.c

[Sasha Levin]

From: Yang Li <yang.lee@linux.alibaba.com>

[ Upstream commit 7db8263a12155c7ae4ad97e850f1e499c73765fc ]

When adapter->registered_device_map is NULL, the value of err is
uncertain, we set err to -EINVAL to avoid ambiguity.

Clean up smatch warning:
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing
error code 'err'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
index f5f1b0b51ebd..79eb2257a30e 100644
--- a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
+++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
@@ -1133,6 +1133,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!adapter->registered_device_map) {
 		pr_err("%s: could not register any net devices\n",
 		       pci_name(pdev));
+		err = -EINVAL;
 		goto out_release_adapter_res;
 	}
 
-- 
2.30.2