From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht, bartosz.dudziak@snejp.pl,
Luca Weiss <luca@z3ntu.xyz>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Andy Gross <agross@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/8] pinctrl: qcom: msm8226: fill in more functions
Date: Sun, 12 Sep 2021 01:26:55 +0200 [thread overview]
Message-ID: <20210911232707.259615-2-luca@z3ntu.xyz> (raw)
In-Reply-To: <20210911232707.259615-1-luca@z3ntu.xyz>
Add the functions for QUP4 (spi, uart, uim & i2c), sdc3 and audio_pcm as
derived from the downstream gpiomux configuration.
Also sort the functions alphabetically, while we're at it.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
drivers/pinctrl/qcom/pinctrl-msm8226.c | 74 ++++++++++++++++++--------
1 file changed, 52 insertions(+), 22 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8226.c b/drivers/pinctrl/qcom/pinctrl-msm8226.c
index 98779e62e951..fca0645e8008 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm8226.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8226.c
@@ -338,26 +338,32 @@ static const unsigned int sdc2_data_pins[] = { 122 };
* the pingroup table below.
*/
enum msm8226_functions {
- MSM_MUX_gpio,
- MSM_MUX_cci_i2c0,
+ MSM_MUX_audio_pcm,
MSM_MUX_blsp_i2c1,
MSM_MUX_blsp_i2c2,
MSM_MUX_blsp_i2c3,
+ MSM_MUX_blsp_i2c4,
MSM_MUX_blsp_i2c5,
MSM_MUX_blsp_spi1,
MSM_MUX_blsp_spi2,
MSM_MUX_blsp_spi3,
+ MSM_MUX_blsp_spi4,
MSM_MUX_blsp_spi5,
MSM_MUX_blsp_uart1,
MSM_MUX_blsp_uart2,
MSM_MUX_blsp_uart3,
+ MSM_MUX_blsp_uart4,
MSM_MUX_blsp_uart5,
MSM_MUX_blsp_uim1,
MSM_MUX_blsp_uim2,
MSM_MUX_blsp_uim3,
+ MSM_MUX_blsp_uim4,
MSM_MUX_blsp_uim5,
MSM_MUX_cam_mclk0,
MSM_MUX_cam_mclk1,
+ MSM_MUX_cci_i2c0,
+ MSM_MUX_gpio,
+ MSM_MUX_sdc3,
MSM_MUX_wlan,
MSM_MUX_NA,
};
@@ -382,6 +388,10 @@ static const char * const gpio_groups[] = {
"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
};
+static const char * const audio_pcm_groups[] = {
+ "gpio63", "gpio64", "gpio65", "gpio66"
+};
+
static const char * const blsp_uart1_groups[] = {
"gpio0", "gpio1", "gpio2", "gpio3"
};
@@ -412,6 +422,16 @@ static const char * const blsp_spi3_groups[] = {
"gpio8", "gpio9", "gpio10", "gpio11"
};
+static const char * const blsp_uart4_groups[] = {
+ "gpio12", "gpio13", "gpio14", "gpio15"
+};
+
+static const char * const blsp_uim4_groups[] = { "gpio12", "gpio13" };
+static const char * const blsp_i2c4_groups[] = { "gpio14", "gpio15" };
+static const char * const blsp_spi4_groups[] = {
+ "gpio12", "gpio13", "gpio14", "gpio15"
+};
+
static const char * const blsp_uart5_groups[] = {
"gpio16", "gpio17", "gpio18", "gpio19"
};
@@ -427,31 +447,41 @@ static const char * const cci_i2c0_groups[] = { "gpio29", "gpio30" };
static const char * const cam_mclk0_groups[] = { "gpio26" };
static const char * const cam_mclk1_groups[] = { "gpio27" };
+static const char * const sdc3_groups[] = {
+ "gpio39", "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"
+};
+
static const char * const wlan_groups[] = {
"gpio40", "gpio41", "gpio42", "gpio43", "gpio44"
};
static const struct msm_function msm8226_functions[] = {
- FUNCTION(gpio),
- FUNCTION(cci_i2c0),
- FUNCTION(blsp_uim1),
- FUNCTION(blsp_uim2),
- FUNCTION(blsp_uim3),
- FUNCTION(blsp_uim5),
+ FUNCTION(audio_pcm),
FUNCTION(blsp_i2c1),
FUNCTION(blsp_i2c2),
FUNCTION(blsp_i2c3),
+ FUNCTION(blsp_i2c4),
FUNCTION(blsp_i2c5),
FUNCTION(blsp_spi1),
FUNCTION(blsp_spi2),
FUNCTION(blsp_spi3),
+ FUNCTION(blsp_spi4),
FUNCTION(blsp_spi5),
FUNCTION(blsp_uart1),
FUNCTION(blsp_uart2),
FUNCTION(blsp_uart3),
+ FUNCTION(blsp_uart4),
FUNCTION(blsp_uart5),
+ FUNCTION(blsp_uim1),
+ FUNCTION(blsp_uim2),
+ FUNCTION(blsp_uim3),
+ FUNCTION(blsp_uim4),
+ FUNCTION(blsp_uim5),
FUNCTION(cam_mclk0),
FUNCTION(cam_mclk1),
+ FUNCTION(cci_i2c0),
+ FUNCTION(gpio),
+ FUNCTION(sdc3),
FUNCTION(wlan),
};
@@ -468,10 +498,10 @@ static const struct msm_pingroup msm8226_groups[] = {
PINGROUP(9, blsp_spi3, blsp_uart3, blsp_uim3, NA, NA, NA, NA),
PINGROUP(10, blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
PINGROUP(11, blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
- PINGROUP(12, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(13, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(14, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(15, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(12, blsp_spi4, blsp_uart4, blsp_uim4, NA, NA, NA, NA),
+ PINGROUP(13, blsp_spi4, blsp_uart4, blsp_uim4, NA, NA, NA, NA),
+ PINGROUP(14, blsp_spi4, blsp_uart4, blsp_i2c4, NA, NA, NA, NA),
+ PINGROUP(15, blsp_spi4, blsp_uart4, blsp_i2c4, NA, NA, NA, NA),
PINGROUP(16, blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
PINGROUP(17, blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
PINGROUP(18, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA),
@@ -495,12 +525,12 @@ static const struct msm_pingroup msm8226_groups[] = {
PINGROUP(36, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(37, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(38, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(39, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(40, wlan, NA, NA, NA, NA, NA, NA),
- PINGROUP(41, wlan, NA, NA, NA, NA, NA, NA),
- PINGROUP(42, wlan, NA, NA, NA, NA, NA, NA),
- PINGROUP(43, wlan, NA, NA, NA, NA, NA, NA),
- PINGROUP(44, wlan, NA, NA, NA, NA, NA, NA),
+ PINGROUP(39, NA, sdc3, NA, NA, NA, NA, NA),
+ PINGROUP(40, wlan, sdc3, NA, NA, NA, NA, NA),
+ PINGROUP(41, wlan, sdc3, NA, NA, NA, NA, NA),
+ PINGROUP(42, wlan, sdc3, NA, NA, NA, NA, NA),
+ PINGROUP(43, wlan, sdc3, NA, NA, NA, NA, NA),
+ PINGROUP(44, wlan, sdc3, NA, NA, NA, NA, NA),
PINGROUP(45, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(46, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(47, NA, NA, NA, NA, NA, NA, NA),
@@ -519,10 +549,10 @@ static const struct msm_pingroup msm8226_groups[] = {
PINGROUP(60, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(61, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(62, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(63, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(64, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(65, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(66, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(63, audio_pcm, NA, NA, NA, NA, NA, NA),
+ PINGROUP(64, audio_pcm, NA, NA, NA, NA, NA, NA),
+ PINGROUP(65, audio_pcm, NA, NA, NA, NA, NA, NA),
+ PINGROUP(66, audio_pcm, NA, NA, NA, NA, NA, NA),
PINGROUP(67, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(68, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(69, NA, NA, NA, NA, NA, NA, NA),
--
2.33.0
next prev parent reply other threads:[~2021-09-11 23:28 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-11 23:26 [PATCH 0/8] Initial LG G Watch R support Luca Weiss
2021-09-11 23:26 ` Luca Weiss [this message]
2021-09-13 17:45 ` [PATCH 1/8] pinctrl: qcom: msm8226: fill in more functions Bjorn Andersson
2021-09-17 22:31 ` Linus Walleij
2021-09-11 23:26 ` [PATCH 2/8] dt-bindings: mmc: sdhci-msm: Add compatible string for msm8226 Luca Weiss
2021-09-14 11:24 ` Ulf Hansson
2021-09-11 23:26 ` [PATCH 3/8] dt-bindings: firmware: scm: Add compatible " Luca Weiss
2021-09-11 23:26 ` [PATCH 4/8] ARM: dts: qcom: msm8226: Add more SoC bits Luca Weiss
2021-09-11 23:26 ` [PATCH 5/8] ARM: dts: qcom: Add pm8226 PMIC Luca Weiss
2021-09-11 23:27 ` [PATCH 6/8] dt-bindings: vendor-prefixes: add LG Electronics Luca Weiss
2021-09-13 8:49 ` Krzysztof Kozlowski
2021-09-13 19:14 ` Luca Weiss
2021-09-14 7:24 ` Krzysztof Kozlowski
2022-01-27 0:20 ` Petr Vorel
2022-01-27 7:45 ` Krzysztof Kozlowski
2022-01-27 20:51 ` Luca Weiss
2022-01-28 9:57 ` Krzysztof Kozlowski
2022-01-29 9:45 ` Luca Weiss
2022-01-29 10:34 ` Krzysztof Kozlowski
2021-09-11 23:27 ` [PATCH 7/8] dt-bindings: arm: qcom: Document APQ8026 SoC binding Luca Weiss
2021-09-20 21:53 ` Rob Herring
2021-09-11 23:27 ` [PATCH 8/8] ARM: dts: qcom: Add support for LG G Watch R Luca Weiss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210911232707.259615-2-luca@z3ntu.xyz \
--to=luca@z3ntu.xyz \
--cc=agross@kernel.org \
--cc=bartosz.dudziak@snejp.pl \
--cc=bjorn.andersson@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).