* [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 [not found] <YUsTYFOdMH/kQEyE@hovoldconsulting.com> @ 2021-09-22 11:30 ` Johan Hovold 2021-09-22 11:31 ` [PATCH 2/2] USB: serial: cp210x: add part-number debug printk Johan Hovold 2021-09-22 20:12 ` [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 Malte Di Donato 0 siblings, 2 replies; 4+ messages in thread From: Johan Hovold @ 2021-09-22 11:30 UTC (permalink / raw) To: Johan Hovold; +Cc: Malte Di Donato, linux-usb, linux-kernel, stable Some CP2102 do not support event-insertion mode but return no error when attempting to enable it. This means that any event escape characters in the input stream will not be escaped by the device and consequently regular data may be interpreted as escape sequences and be removed from the stream by the driver. The reporter's device has batch number DCL00X etched into it and as discovered by the SHA2017 Badge team, counterfeit devices with that marking can be detected by sending malformed vendor requests. [1][2] Tests confirm that the possibly counterfeit CP2102 returns a single byte in response to a malformed two-byte part-number request, while an original CP2102 returns two bytes. Assume that every CP2102 that behaves this way also does not support event-insertion mode (e.g. cannot report parity errors). [1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376 Reported-by: Malte Di Donato <malte@neo-soft.org> Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") Cc: stable@vger.kernel.org # 5.9 Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/usb/serial/cp210x.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 66a6ac50a4cd..b98454fe08ea 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -258,6 +258,7 @@ struct cp210x_serial_private { speed_t max_speed; bool use_actual_rate; bool no_flow_control; + bool no_event_mode; }; enum cp210x_event_state { @@ -1113,12 +1114,16 @@ static void cp210x_change_speed(struct tty_struct *tty, static void cp210x_enable_event_mode(struct usb_serial_port *port) { + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); int ret; if (port_priv->event_mode) return; + if (priv->no_event_mode) + return; + port_priv->event_state = ES_DATA; port_priv->event_mode = true; @@ -2074,6 +2079,33 @@ static void cp210x_init_max_speed(struct usb_serial *serial) priv->use_actual_rate = use_actual_rate; } +static void cp2102_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 *buf; + int ret; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return; + /* + * Some (possibly counterfeit) CP2102 do not support event-insertion + * mode and respond differently to malformed vendor requests. + * Specifically, they return one instead of two bytes when sent a + * two-byte part-number request. + */ + ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT); + if (ret == 1) { + dev_dbg(&serial->interface->dev, + "device does not support event-insertion mode\n"); + priv->no_event_mode = true; + } + + kfree(buf); +} + static int cp210x_get_fw_version(struct usb_serial *serial, u16 value) { struct cp210x_serial_private *priv = usb_get_serial_data(serial); @@ -2109,6 +2141,9 @@ static void cp210x_determine_type(struct usb_serial *serial) } switch (priv->partnum) { + case CP210X_PARTNUM_CP2102: + cp2102_determine_quirks(serial); + break; case CP210X_PARTNUM_CP2105: case CP210X_PARTNUM_CP2108: cp210x_get_fw_version(serial, CP210X_GET_FW_VER); -- 2.32.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] USB: serial: cp210x: add part-number debug printk 2021-09-22 11:30 ` [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 Johan Hovold @ 2021-09-22 11:31 ` Johan Hovold 2021-09-22 20:12 ` [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 Malte Di Donato 1 sibling, 0 replies; 4+ messages in thread From: Johan Hovold @ 2021-09-22 11:31 UTC (permalink / raw) To: Johan Hovold; +Cc: Malte Di Donato, linux-usb, linux-kernel Add a part-number debug printk to facilitate debugging. Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index b98454fe08ea..fd51498ab108 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -2140,6 +2140,8 @@ static void cp210x_determine_type(struct usb_serial *serial) return; } + dev_dbg(&serial->interface->dev, "partnum = 0x%02x\n", priv->partnum); + switch (priv->partnum) { case CP210X_PARTNUM_CP2102: cp2102_determine_quirks(serial); -- 2.32.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 2021-09-22 11:30 ` [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 Johan Hovold 2021-09-22 11:31 ` [PATCH 2/2] USB: serial: cp210x: add part-number debug printk Johan Hovold @ 2021-09-22 20:12 ` Malte Di Donato 2021-09-23 8:49 ` Johan Hovold 1 sibling, 1 reply; 4+ messages in thread From: Malte Di Donato @ 2021-09-22 20:12 UTC (permalink / raw) To: Johan Hovold; +Cc: linux-usb, linux-kernel, stable Tested-by: Malte Di Donato <malte@neo-soft.org> # dmesg (cp2102 connect) [57018.586990] usb 3-1.2: new full-speed USB device number 17 using ehci-pci [57018.727102] usb 3-1.2: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00 [57018.727109] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [57018.727112] usb 3-1.2: Product: CP2102 USB to UART Bridge Controller [57018.727115] usb 3-1.2: Manufacturer: Silicon Labs [57018.727117] usb 3-1.2: SerialNumber: 0001 [57018.735520] cp210x 3-1.2:1.0: cp210x converter detected [57018.736071] cp210x 3-1.2:1.0: partnum = 0x02 [57018.736529] cp210x 3-1.2:1.0: device does not support event-insertion mode [57018.738780] usb 3-1.2: cp210x converter now attached to ttyUSB0 # sucessfully did a complete mem dump of a device which sends several valid 0xEC 0x00 # libdivecomputer/examples/dctool -d "Mares Puck Pro" dump -o /tmp/test.bin /dev/ttyUSB0 Opening the I/O stream (serial, /dev/ttyUSB0). Opening the device (Mares Puck Pro). Registering the event handler. Registering the cancellation handler. Downloading the memory dump. Event: vendor=000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000005075636B2050726F000000000000000030342E30302E30300400000031342D30342D31352B8B4443303234000000000000000000000000000000000000000000000000000000 Event: progress 0.00% (0/262144) Event: progress 0.10% (256/262144) ... Event: progress 100.00% (262144/262144) On 22.09.21 13:30, Johan Hovold wrote: > Some CP2102 do not support event-insertion mode but return no error when > attempting to enable it. > > This means that any event escape characters in the input stream will not > be escaped by the device and consequently regular data may be > interpreted as escape sequences and be removed from the stream by the > driver. > > The reporter's device has batch number DCL00X etched into it and as > discovered by the SHA2017 Badge team, counterfeit devices with that > marking can be detected by sending malformed vendor requests. [1][2] > > Tests confirm that the possibly counterfeit CP2102 returns a single byte > in response to a malformed two-byte part-number request, while an > original CP2102 returns two bytes. Assume that every CP2102 that behaves > this way also does not support event-insertion mode (e.g. cannot report > parity errors). > > [1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 > [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376 > > Reported-by: Malte Di Donato <malte@neo-soft.org> > Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") > Cc: stable@vger.kernel.org # 5.9 > Signed-off-by: Johan Hovold <johan@kernel.org> > --- > drivers/usb/serial/cp210x.c | 35 +++++++++++++++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c > index 66a6ac50a4cd..b98454fe08ea 100644 > --- a/drivers/usb/serial/cp210x.c > +++ b/drivers/usb/serial/cp210x.c > @@ -258,6 +258,7 @@ struct cp210x_serial_private { > speed_t max_speed; > bool use_actual_rate; > bool no_flow_control; > + bool no_event_mode; > }; > > enum cp210x_event_state { > @@ -1113,12 +1114,16 @@ static void cp210x_change_speed(struct tty_struct *tty, > > static void cp210x_enable_event_mode(struct usb_serial_port *port) > { > + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); > struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); > int ret; > > if (port_priv->event_mode) > return; > > + if (priv->no_event_mode) > + return; > + > port_priv->event_state = ES_DATA; > port_priv->event_mode = true; > > @@ -2074,6 +2079,33 @@ static void cp210x_init_max_speed(struct usb_serial *serial) > priv->use_actual_rate = use_actual_rate; > } > > +static void cp2102_determine_quirks(struct usb_serial *serial) > +{ > + struct cp210x_serial_private *priv = usb_get_serial_data(serial); > + u8 *buf; > + int ret; > + > + buf = kmalloc(2, GFP_KERNEL); > + if (!buf) > + return; > + /* > + * Some (possibly counterfeit) CP2102 do not support event-insertion > + * mode and respond differently to malformed vendor requests. > + * Specifically, they return one instead of two bytes when sent a > + * two-byte part-number request. > + */ > + ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), > + CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST, > + CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT); > + if (ret == 1) { > + dev_dbg(&serial->interface->dev, > + "device does not support event-insertion mode\n"); > + priv->no_event_mode = true; > + } > + > + kfree(buf); > +} > + > static int cp210x_get_fw_version(struct usb_serial *serial, u16 value) > { > struct cp210x_serial_private *priv = usb_get_serial_data(serial); > @@ -2109,6 +2141,9 @@ static void cp210x_determine_type(struct usb_serial *serial) > } > > switch (priv->partnum) { > + case CP210X_PARTNUM_CP2102: > + cp2102_determine_quirks(serial); > + break; > case CP210X_PARTNUM_CP2105: > case CP210X_PARTNUM_CP2108: > cp210x_get_fw_version(serial, CP210X_GET_FW_VER); > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 2021-09-22 20:12 ` [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 Malte Di Donato @ 2021-09-23 8:49 ` Johan Hovold 0 siblings, 0 replies; 4+ messages in thread From: Johan Hovold @ 2021-09-23 8:49 UTC (permalink / raw) To: Malte Di Donato; +Cc: linux-usb, linux-kernel, stable On Wed, Sep 22, 2021 at 10:12:48PM +0200, Malte Di Donato wrote: > Tested-by: Malte Di Donato <malte@neo-soft.org> Thanks for testing. Now applied. Johan ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-09-23 8:49 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <YUsTYFOdMH/kQEyE@hovoldconsulting.com>
2021-09-22 11:30 ` [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 Johan Hovold
2021-09-22 11:31 ` [PATCH 2/2] USB: serial: cp210x: add part-number debug printk Johan Hovold
2021-09-22 20:12 ` [PATCH 1/2] USB: serial: cp210x: fix dropped characters with CP2102 Malte Di Donato
2021-09-23 8:49 ` Johan Hovold
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).