From: Xiaoming Ni <nixiaoming@huawei.com>
To: <linux-kernel@vger.kernel.org>, <oss@buserror.net>,
<mpe@ellerman.id.au>, <benh@kernel.crashing.org>,
<paulus@samba.org>, <paul.gortmaker@windriver.com>,
<Yuantian.Tang@feescale.com>, <chenhui.zhao@freescale.com>,
<linuxppc-dev@lists.ozlabs.org>
Cc: <nixiaoming@huawei.com>, <wangle6@huawei.com>,
<wangxiongfeng2@huawei.com>
Subject: [PATCH] powerpc:85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n
Date: Sun, 26 Sep 2021 10:51:44 +0800 [thread overview]
Message-ID: <20210926025144.55674-1-nixiaoming@huawei.com> (raw)
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org #v4.6
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
---
arch/powerpc/platforms/85xx/Makefile | 2 +-
arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c | 4 ++++
arch/powerpc/platforms/85xx/smp.c | 9 ++++-----
3 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 60e4e97a929d..71ce1f6b6966 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,7 +3,7 @@
# Makefile for the PowerPC 85xx linux kernel.
#
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_FSL_PMC) += mpc85xx_pm_ops.o
+obj-$(CONFIG_SMP) += mpc85xx_pm_ops.o
obj-y += common.o
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
index 7c0133f558d0..a5656b3e9701 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
@@ -17,6 +17,7 @@
static struct ccsr_guts __iomem *guts;
+#ifdef CONFIG_FSL_PMC
static void mpc85xx_irq_mask(int cpu)
{
@@ -49,6 +50,7 @@ static void mpc85xx_cpu_up_prepare(int cpu)
{
}
+#endif
static void mpc85xx_freeze_time_base(bool freeze)
{
@@ -76,10 +78,12 @@ static const struct of_device_id mpc85xx_smp_guts_ids[] = {
static const struct fsl_pm_ops mpc85xx_pm_ops = {
.freeze_time_base = mpc85xx_freeze_time_base,
+#ifdef CONFIG_FSL_PMC
.irq_mask = mpc85xx_irq_mask,
.irq_unmask = mpc85xx_irq_unmask,
.cpu_die = mpc85xx_cpu_die,
.cpu_up_prepare = mpc85xx_cpu_up_prepare,
+#endif
};
int __init mpc85xx_setup_pmc(void)
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index c6df294054fe..349298cd9671 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -40,7 +40,6 @@ struct epapr_spin_table {
u32 pir;
};
-#ifdef CONFIG_HOTPLUG_CPU
static u64 timebase;
static int tb_req;
static int tb_valid;
@@ -112,6 +111,7 @@ static void mpc85xx_take_timebase(void)
local_irq_restore(flags);
}
+#ifdef CONFIG_HOTPLUG_CPU
static void smp_85xx_cpu_offline_self(void)
{
unsigned int cpu = smp_processor_id();
@@ -499,17 +499,16 @@ void __init mpc85xx_smp_init(void)
#ifdef CONFIG_FSL_CORENET_RCPM
fsl_rcpm_init();
#endif
-
-#ifdef CONFIG_FSL_PMC
- mpc85xx_setup_pmc();
#endif
+ mpc85xx_setup_pmc();
if (qoriq_pm_ops) {
smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
+#ifdef CONFIG_HOTPLUG_CPU
smp_85xx_ops.cpu_offline_self = smp_85xx_cpu_offline_self;
smp_85xx_ops.cpu_die = qoriq_cpu_kill;
- }
#endif
+ }
smp_ops = &smp_85xx_ops;
#ifdef CONFIG_KEXEC_CORE
--
2.27.0
next reply other threads:[~2021-09-26 2:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-26 2:51 Xiaoming Ni [this message]
2021-09-26 12:34 ` [PATCH] powerpc:85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n Xiaoming Ni
2021-09-29 3:36 ` [PATCH v2 0/2] " Xiaoming Ni
2021-09-29 3:36 ` [PATCH v2 1/2] powerpc:85xx:Fix oops when mpc85xx_smp_guts_ids node cannot be found Xiaoming Ni
2021-09-29 3:36 ` [PATCH v2 2/2] powerpc:85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n Xiaoming Ni
2021-10-11 12:06 ` [PATCH v2 0/2] " Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210926025144.55674-1-nixiaoming@huawei.com \
--to=nixiaoming@huawei.com \
--cc=Yuantian.Tang@feescale.com \
--cc=benh@kernel.crashing.org \
--cc=chenhui.zhao@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=oss@buserror.net \
--cc=paul.gortmaker@windriver.com \
--cc=paulus@samba.org \
--cc=wangle6@huawei.com \
--cc=wangxiongfeng2@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).