* [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free
@ 2021-09-29 3:42 Shawn Guo
2021-09-29 3:42 ` [PATCH 01/10] dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent node Shawn Guo
` (9 more replies)
0 siblings, 10 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
As I recently add QMP USB3 PHY support for QCM2290 and touch the binding
doc. Rob's bot report a huge number of dtbs_check warnings on Qualcomm
DTS files. Although none of them is new warning introduced by my
change, I decided to clean them up.
The first two patches are fixes on QMP PHY binding, and the reset are
all fixes on Qualcomm DTS. In the end, with this series, we are QMP PHY
dtbs_check warning free!
Shawn Guo (10):
dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent
node
dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no
supply
arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node
arm64: dts: qcom: Correct QMP PHY child node name
arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from
QMP PHY
arm64: dts: qcom: Drop reg-names from QMP PHY nodes
arm64: dts: qcom: msm8998-clamshell: Add missing vdda supplies
arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes
arm64: dts: qcom: ipq8074-hk01: Add dummy supply for QMP USB3 PHY
ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node
.../devicetree/bindings/phy/qcom,qmp-phy.yaml | 57 +++++++++----------
arch/arm/boot/dts/qcom-sdx55.dtsi | 1 -
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts | 3 -
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 6 ++
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 54 +++++++++++++-----
arch/arm64/boot/dts/qcom/msm8996.dtsi | 14 ++---
.../boot/dts/qcom/msm8998-clamshell.dtsi | 2 +
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 4 --
.../boot/dts/qcom/msm8998-oneplus-common.dtsi | 4 --
arch/arm64/boot/dts/qcom/msm8998.dtsi | 8 +--
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 2 -
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 2 -
arch/arm64/boot/dts/qcom/sdm845.dtsi | 11 ++--
arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 2 -
.../dts/qcom/sm8150-microsoft-surface-duo.dts | 2 -
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 2 -
arch/arm64/boot/dts/qcom/sm8150.dtsi | 7 +--
arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 2 -
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 2 -
arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 ++--
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 2 -
arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 2 -
arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 +-
24 files changed, 102 insertions(+), 105 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 01/10] dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent node
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
2021-10-04 18:41 ` Rob Herring
2021-10-05 6:34 ` Vinod Koul
2021-09-29 3:42 ` [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply Shawn Guo
` (8 subsequent siblings)
9 siblings, 2 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
'#clock-cells' is not required for parent qmp-phy node but the child
phy/lane node.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 5 -----
1 file changed, 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 75be5650a198..604435e46623 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -58,9 +58,6 @@ properties:
- description: Address and length of PHY's common serdes block.
- description: Address and length of PHY's DP_COM control block.
- "#clock-cells":
- enum: [ 1, 2 ]
-
"#address-cells":
enum: [ 1, 2 ]
@@ -108,7 +105,6 @@ patternProperties:
required:
- compatible
- reg
- - "#clock-cells"
- "#address-cells"
- "#size-cells"
- ranges
@@ -421,7 +417,6 @@ examples:
usb_2_qmpphy: phy-wrapper@88eb000 {
compatible = "qcom,sdm845-qmp-usb3-uni-phy";
reg = <0x088eb000 0x18c>;
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x088eb000 0x2000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
2021-09-29 3:42 ` [PATCH 01/10] dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent node Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
2021-10-04 18:43 ` Rob Herring
` (2 more replies)
2021-09-29 3:42 ` [PATCH 03/10] arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node Shawn Guo
` (7 subsequent siblings)
9 siblings, 3 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
The qmp-phy driver suggests that 'vdda-phy-supply' and 'vdda-pll-supply'
are not required for IPQ6018 and IPQ8074 QMP PCIe PHY. Update the
bindings to reflect it.
While at it, also correct the clock properies for IPQ8074 QMP PCIe PHY.
And as the result, 'qcom,ipq8074-qmp-pcie-phy' and
'qcom,ipq6018-qmp-pcie-phy' share the same clock, reset and supply
bindings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
.../devicetree/bindings/phy/qcom,qmp-phy.yaml | 52 ++++++++++---------
1 file changed, 28 insertions(+), 24 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 604435e46623..ed62dde5f97d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -112,8 +112,6 @@ required:
- clock-names
- resets
- reset-names
- - vdda-phy-supply
- - vdda-pll-supply
additionalProperties: false
@@ -146,6 +144,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -172,6 +173,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -200,6 +204,9 @@ allOf:
- const: phy
- const: common
- const: cfg
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -229,6 +236,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -249,6 +259,9 @@ allOf:
reset-names:
items:
- const: ufsphy
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -274,34 +287,16 @@ allOf:
reset-names:
items:
- const: ufsphy
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,ipq8074-qmp-pcie-phy
- then:
- properties:
- clocks:
- items:
- - description: pipe clk.
- clock-names:
- items:
- - const: pipe_clk
- resets:
- items:
- - description: reset of phy block.
- - description: phy common block reset.
- reset-names:
- items:
- - const: phy
- - const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq6018-qmp-pcie-phy
+ - qcom,ipq8074-qmp-pcie-phy
then:
properties:
clocks:
@@ -352,6 +347,9 @@ allOf:
reset-names:
items:
- const: phy
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -383,6 +381,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -410,6 +411,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
examples:
- |
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 03/10] arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
2021-09-29 3:42 ` [PATCH 01/10] dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent node Shawn Guo
2021-09-29 3:42 ` [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
2021-09-29 3:42 ` [PATCH 04/10] arm64: dts: qcom: Correct QMP PHY child node name Shawn Guo
` (6 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
'#clock-cells' is a required property of QMP PHY child node, not itself.
Move it to fix the dtbs_check warnings.
There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because
child nodes already have the property.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 3 ---
4 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index db333001df4d..0c7dbdc861c1 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -91,7 +91,6 @@
ssphy_1: phy@58000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
reg = <0x00058000 0x1c4>;
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -112,6 +111,7 @@
<0x00058800 0x1f8>, /* PCS */
<0x00058600 0x044>; /* PCS misc*/
#phy-cells = <0>;
+ #clock-cells = <1>;
clocks = <&gcc GCC_USB1_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb1_pipe_clk_src";
@@ -134,7 +134,6 @@
ssphy_0: phy@78000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
reg = <0x00078000 0x1c4>;
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -155,6 +154,7 @@
<0x00078800 0x1f8>, /* PCS */
<0x00078600 0x044>; /* PCS misc*/
#phy-cells = <0>;
+ #clock-cells = <1>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb0_pipe_clk_src";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 52df22ab3f6a..a190ed891a62 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -582,7 +582,6 @@
pcie_phy: phy@34000 {
compatible = "qcom,msm8996-qmp-pcie-phy";
reg = <0x00034000 0x488>;
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -604,6 +603,7 @@
<0x00035400 0x1dc>;
#phy-cells = <0>;
+ #clock-cells = <1>;
clock-output-names = "pcie_0_pipe_clk_src";
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "pipe0";
@@ -2586,7 +2586,6 @@
usb3phy: phy@7410000 {
compatible = "qcom,msm8996-qmp-usb3-phy";
reg = <0x07410000 0x1c4>;
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -2607,6 +2606,7 @@
<0x07410600 0x1a8>;
#phy-cells = <0>;
+ #clock-cells = <1>;
clock-output-names = "usb3_phy_pipe_clk_src";
clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
clock-names = "pipe0";
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 34039b5c8017..f3bd1197d65e 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1981,7 +1981,6 @@
compatible = "qcom,msm8998-qmp-usb3-phy";
reg = <0x0c010000 0x18c>;
status = "disabled";
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -2002,6 +2001,7 @@
<0xc010600 0x128>,
<0xc010800 0x200>;
#phy-cells = <0>;
+ #clock-cells = <1>;
clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e91cd8a5e535..9c44e62a9cd9 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1070,7 +1070,6 @@
reg = <0 0x01d87000 0 0xe10>;
#address-cells = <2>;
#size-cells = <2>;
- #clock-cells = <1>;
ranges;
clock-names = "ref",
"ref_aux";
@@ -1205,7 +1204,6 @@
<0 0x088e8000 0 0x20>;
reg-names = "reg-base", "dp_com";
status = "disabled";
- #clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -1238,7 +1236,6 @@
compatible = "qcom,sm8350-qmp-usb3-uni-phy";
reg = <0 0x088eb000 0 0x200>;
status = "disabled";
- #clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 04/10] arm64: dts: qcom: Correct QMP PHY child node name
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
` (2 preceding siblings ...)
2021-09-29 3:42 ` [PATCH 03/10] arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
2021-09-29 3:42 ` [PATCH 05/10] arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHY Shawn Guo
` (5 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
Many child nodes of QMP PHY are named without following bindings schema
and causing dtbs_check warnings like below.
phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$'
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
Correct them to fix the warnings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 +++++-----
arch/arm64/boot/dts/qcom/msm8998.dtsi | 6 +++---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 +++++-----
arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 +++---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 +++++-----
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
8 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index d2fe58e0eb7a..4583e2953e78 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -401,7 +401,7 @@
reset-names = "phy",
"common";
- pcie_phy0: lane@84200 {
+ pcie_phy0: phy@84200 {
reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
<0x0 0x84400 0x0 0x200>, /* Serdes Rx */
<0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 0c7dbdc861c1..2e4e1399e276 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -105,7 +105,7 @@
reset-names = "phy","common";
status = "disabled";
- usb1_ssphy: lane@58200 {
+ usb1_ssphy: phy@58200 {
reg = <0x00058200 0x130>, /* Tx */
<0x00058400 0x200>, /* Rx */
<0x00058800 0x1f8>, /* PCS */
@@ -148,7 +148,7 @@
reset-names = "phy","common";
status = "disabled";
- usb0_ssphy: lane@78200 {
+ usb0_ssphy: phy@78200 {
reg = <0x00078200 0x130>, /* Tx */
<0x00078400 0x200>, /* Rx */
<0x00078800 0x1f8>, /* PCS */
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a190ed891a62..a0bf3af47350 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -597,7 +597,7 @@
reset-names = "phy", "common", "cfg";
status = "disabled";
- pciephy_0: lane@35000 {
+ pciephy_0: phy@35000 {
reg = <0x00035000 0x130>,
<0x00035200 0x200>,
<0x00035400 0x1dc>;
@@ -611,7 +611,7 @@
reset-names = "lane0";
};
- pciephy_1: lane@36000 {
+ pciephy_1: phy@36000 {
reg = <0x00036000 0x130>,
<0x00036200 0x200>,
<0x00036400 0x1dc>;
@@ -624,7 +624,7 @@
reset-names = "lane1";
};
- pciephy_2: lane@37000 {
+ pciephy_2: phy@37000 {
reg = <0x00037000 0x130>,
<0x00037200 0x200>,
<0x00037400 0x1dc>;
@@ -1746,7 +1746,7 @@
reset-names = "ufsphy";
status = "disabled";
- ufsphy_lane: lanes@627400 {
+ ufsphy_lane: phy@627400 {
reg = <0x627400 0x12c>,
<0x627600 0x200>,
<0x627c00 0x1b4>;
@@ -2600,7 +2600,7 @@
reset-names = "phy", "common";
status = "disabled";
- ssusb_phy_0: lane@7410200 {
+ ssusb_phy_0: phy@7410200 {
reg = <0x07410200 0x200>,
<0x07410400 0x130>,
<0x07410600 0x1a8>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f3bd1197d65e..512003e833b4 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -990,7 +990,7 @@
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
- pciephy: lane@1c06800 {
+ pciephy: phy@1c06800 {
reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
#phy-cells = <0>;
@@ -1062,7 +1062,7 @@
reset-names = "ufsphy";
resets = <&ufshc 0>;
- ufsphy_lanes: lanes@1da7400 {
+ ufsphy_lanes: phy@1da7400 {
reg = <0x01da7400 0x128>,
<0x01da7600 0x1fc>,
<0x01da7c00 0x1dc>,
@@ -1994,7 +1994,7 @@
<&gcc GCC_USB3PHY_PHY_BCR>;
reset-names = "phy", "common";
- usb1_ssphy: lane@c010200 {
+ usb1_ssphy: phy@c010200 {
reg = <0xc010200 0x128>,
<0xc010400 0x200>,
<0xc010c00 0x20c>,
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 6d7172e6f4c3..ac775189a2e4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2059,7 +2059,7 @@
status = "disabled";
- pcie0_lane: lanes@1c06200 {
+ pcie0_lane: phy@1c06200 {
reg = <0 0x01c06200 0 0x128>,
<0 0x01c06400 0 0x1fc>,
<0 0x01c06800 0 0x218>,
@@ -2169,7 +2169,7 @@
status = "disabled";
- pcie1_lane: lanes@1c06200 {
+ pcie1_lane: phy@1c06200 {
reg = <0 0x01c0a800 0 0x800>,
<0 0x01c0a800 0 0x800>,
<0 0x01c0b800 0 0x400>;
@@ -2297,7 +2297,7 @@
reset-names = "ufsphy";
status = "disabled";
- ufs_mem_phy_lanes: lanes@1d87400 {
+ ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
@@ -3694,7 +3694,7 @@
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: lanes@88e9200 {
+ usb_1_ssphy: phy@88e9200 {
reg = <0 0x088e9200 0 0x128>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
@@ -3727,7 +3727,7 @@
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
- usb_2_ssphy: lane@88eb200 {
+ usb_2_ssphy: phy@88eb200 {
reg = <0 0x088eb200 0 0x128>,
<0 0x088eb400 0 0x1fc>,
<0 0x088eb800 0 0x218>,
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index ef0232c2cf45..4e943e4a93c4 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1692,7 +1692,7 @@
reset-names = "ufsphy";
status = "disabled";
- ufs_mem_phy_lanes: lanes@1d87400 {
+ ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
@@ -3010,7 +3010,7 @@
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: lanes@88e9200 {
+ usb_1_ssphy: phy@88e9200 {
reg = <0 0x088e9200 0 0x200>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
@@ -3043,7 +3043,7 @@
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
- usb_2_ssphy: lane@88eb200 {
+ usb_2_ssphy: phy@88eb200 {
reg = <0 0x088eb200 0 0x200>,
<0 0x088eb400 0 0x200>,
<0 0x088eb800 0 0x800>,
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 8c15d9fed08f..d5b76ec7b11f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1463,7 +1463,7 @@
status = "disabled";
- pcie0_lane: lanes@1c06200 {
+ pcie0_lane: phy@1c06200 {
reg = <0 0x1c06200 0 0x170>, /* tx */
<0 0x1c06400 0 0x200>, /* rx */
<0 0x1c06800 0 0x1f0>, /* pcs */
@@ -1567,7 +1567,7 @@
status = "disabled";
- pcie1_lane: lanes@1c0e200 {
+ pcie1_lane: phy@1c0e200 {
reg = <0 0x1c0e200 0 0x170>, /* tx0 */
<0 0x1c0e400 0 0x200>, /* rx0 */
<0 0x1c0ea00 0 0x1f0>, /* pcs */
@@ -1673,7 +1673,7 @@
status = "disabled";
- pcie2_lane: lanes@1c16200 {
+ pcie2_lane: phy@1c16200 {
reg = <0 0x1c16200 0 0x170>, /* tx0 */
<0 0x1c16400 0 0x200>, /* rx0 */
<0 0x1c16a00 0 0x1f0>, /* pcs */
@@ -1750,7 +1750,7 @@
reset-names = "ufsphy";
status = "disabled";
- ufs_mem_phy_lanes: lanes@1d87400 {
+ ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
@@ -2330,7 +2330,7 @@
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
- usb_2_ssphy: lanes@88eb200 {
+ usb_2_ssphy: phy@88eb200 {
reg = <0 0x088eb200 0 0x200>,
<0 0x088eb400 0 0x200>,
<0 0x088eb800 0 0x800>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 9c44e62a9cd9..b19a3619e56b 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1080,7 +1080,7 @@
reset-names = "ufsphy";
status = "disabled";
- ufs_mem_phy_lanes: lanes@1d87400 {
+ ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 05/10] arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHY
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
` (3 preceding siblings ...)
2021-09-29 3:42 ` [PATCH 04/10] arm64: dts: qcom: Correct QMP PHY child node name Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
2021-09-29 3:42 ` [PATCH 06/10] arm64: dts: qcom: Drop reg-names from QMP PHY nodes Shawn Guo
` (4 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
The following properties are not supported and causing dtbs_check
warnings.
- vdda-phy-max-microamp
- vdda-pll-max-microamp
- vddp-ref-clk-max-microamp
- vddp-ref-clk-always-on
Drop them from QMP PHY nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts | 3 ---
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 4 ----
arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi | 4 ----
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 2 --
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 2 --
arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 2 --
arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts | 2 --
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 2 --
arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 2 --
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 2 --
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 2 --
arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 2 --
12 files changed, 29 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
index a57c60070cdc..567b33106556 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -395,9 +395,6 @@
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
-
- vdda-phy-max-microamp = <18380>;
- vdda-pll-max-microamp = <9440>;
};
&venus {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index a1d15eab8553..af67c641df4e 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -371,10 +371,6 @@
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
vddp-ref-clk-supply = <&vreg_l26a_1p2>;
- vdda-phy-max-microamp = <51400>;
- vdda-pll-max-microamp = <14600>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
};
&usb3 {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 0f5c7828a901..654188027f79 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -480,10 +480,6 @@
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
vddp-ref-clk-supply = <&vreg_l26a_1p2>;
- vdda-phy-max-microamp = <51400>;
- vdda-pll-max-microamp = <14600>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
};
&usb3 {
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 8ac96f8e79d4..100254489b87 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1212,9 +1212,7 @@
status = "okay";
vdda-phy-supply = <&vreg_l5a_0p88>;
- vdda-max-microamp = <89900>;
vdda-pll-supply = <&vreg_l9a_1p2>;
- vdda-pll-max-microamp = <18800>;
};
&usb_1 {
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 5ae2ddc65f7e..6f05934b4ccc 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -328,9 +328,7 @@
status = "okay";
vdda-phy-supply = <&vreg_l8c_1p2>;
- vdda-max-microamp = <87100>;
vdda-pll-supply = <&vreg_l5a_0p88>;
- vdda-pll-max-microamp = <18300>;
};
&usb_1 {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index 335aa0753fc0..37ddca0f0223 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -419,9 +419,7 @@
status = "okay";
vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
- vdda-max-microamp = <90200>;
vdda-pll-supply = <&vreg_l3c_1p2>;
- vdda-pll-max-microamp = <19000>;
};
&usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index 736da9af44e0..6802097f576f 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -507,9 +507,7 @@
status = "okay";
vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
- vdda-max-microamp = <90200>;
vdda-pll-supply = <&vreg_l3c_1p2>;
- vdda-pll-max-microamp = <19000>;
};
&usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index b484371a6044..46b5cf9a1192 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -416,9 +416,7 @@
status = "okay";
vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
- vdda-max-microamp = <90200>;
vdda-pll-supply = <&vreg_l3c_1p2>;
- vdda-pll-max-microamp = <19000>;
};
&usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
index 47742816ac2f..3b082472062b 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
@@ -409,9 +409,7 @@
status = "okay";
vdda-phy-supply = <&vreg_l5a_0p88>;
- vdda-max-microamp = <89900>;
vdda-pll-supply = <&vreg_l9a_1p2>;
- vdda-pll-max-microamp = <18800>;
};
&usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 062b944be91d..5ffbcdd387ba 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -647,9 +647,7 @@
status = "okay";
vdda-phy-supply = <&vreg_l5a_0p875>;
- vdda-max-microamp = <90200>;
vdda-pll-supply = <&vreg_l9a_1p2>;
- vdda-pll-max-microamp = <19000>;
};
&usb_1 {
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 56093e260ddf..be062377c936 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -251,9 +251,7 @@
status = "okay";
vdda-phy-supply = <&vreg_l5b_0p88>;
- vdda-max-microamp = <91600>;
vdda-pll-supply = <&vreg_l6b_1p2>;
- vdda-pll-max-microamp = <19000>;
};
&usb_1 {
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
index bd95009c1875..5a8a966c475c 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -318,9 +318,7 @@
status = "okay";
vdda-phy-supply = <&vreg_l5b_0p88>;
- vdda-max-microamp = <91600>;
vdda-pll-supply = <&vreg_l6b_1p2>;
- vdda-pll-max-microamp = <19000>;
};
&usb_1 {
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 06/10] arm64: dts: qcom: Drop reg-names from QMP PHY nodes
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
` (4 preceding siblings ...)
2021-09-29 3:42 ` [PATCH 05/10] arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHY Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
2021-09-29 3:42 ` [PATCH 07/10] arm64: dts: qcom: msm8998-clamshell: Add missing vdda supplies Shawn Guo
` (3 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
The 'reg-names' is not a supported/used property. Drop it from QMP PHY
nodes to fix dtbs_check warnings like below.
phy-wrapper@88e9000: 'reg-names' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/sm8350-hdk.dt.yaml
arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 -
arch/arm64/boot/dts/qcom/sm8150.dtsi | 1 -
arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 -
3 files changed, 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ac775189a2e4..216d703f3e55 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3678,7 +3678,6 @@
compatible = "qcom,sdm845-qmp-usb3-phy";
reg = <0 0x088e9000 0 0x18c>,
<0 0x088e8000 0 0x10>;
- reg-names = "reg-base", "dp_com";
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 4e943e4a93c4..99cd54c69956 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2994,7 +2994,6 @@
compatible = "qcom,sm8150-qmp-usb3-phy";
reg = <0 0x088e9000 0 0x18c>,
<0 0x088e8000 0 0x10>;
- reg-names = "reg-base", "dp_com";
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b19a3619e56b..dcda4fac46b1 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1202,7 +1202,6 @@
compatible = "qcom,sm8350-qmp-usb3-phy";
reg = <0 0x088e9000 0 0x200>,
<0 0x088e8000 0 0x20>;
- reg-names = "reg-base", "dp_com";
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 07/10] arm64: dts: qcom: msm8998-clamshell: Add missing vdda supplies
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
` (5 preceding siblings ...)
2021-09-29 3:42 ` [PATCH 06/10] arm64: dts: qcom: Drop reg-names from QMP PHY nodes Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
2021-09-29 3:42 ` [PATCH 08/10] arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes Shawn Guo
` (2 subsequent siblings)
9 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
'vdda-phy-supply' and 'vdda-pll-supply' are required properties. Add
them to fix the dtbs_check warnings below.
phy@1da7000: 'vdda-phy-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
phy@1da7000: 'vdda-pll-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 125d7923d713..3f60575a351c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -313,6 +313,8 @@
&ufsphy {
status = "okay";
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
};
&usb3 {
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 08/10] arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
` (6 preceding siblings ...)
2021-09-29 3:42 ` [PATCH 07/10] arm64: dts: qcom: msm8998-clamshell: Add missing vdda supplies Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
2021-09-29 3:42 ` [PATCH 09/10] arm64: dts: qcom: ipq8074-hk01: Add dummy supply for QMP USB3 PHY Shawn Guo
2021-09-29 3:42 ` [PATCH 10/10] ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node Shawn Guo
9 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
IPQ8074 PCIe PHY nodes are broken in the many ways:
- '#address-cells', '#size-cells' and 'ranges' are missing.
- Child phy/lane node is missing, and the child properties like
'#phy-cells' and 'clocks' are mistakenly put into parent node.
- The clocks properties for parent node are missing.
Fix them to get the nodes comply with the bindings schema.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 46 +++++++++++++++++++++------
1 file changed, 36 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2e4e1399e276..dfdd3e4a4087 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -174,34 +174,60 @@
status = "disabled";
};
- pcie_phy0: phy@86000 {
+ pcie_qmp0: phy@86000 {
compatible = "qcom,ipq8074-qmp-pcie-phy";
reg = <0x00086000 0x1000>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
- clock-names = "pipe_clk";
- clock-output-names = "pcie20_phy0_pipe_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
resets = <&gcc GCC_PCIE0_PHY_BCR>,
<&gcc GCC_PCIE0PHY_PHY_BCR>;
reset-names = "phy",
"common";
status = "disabled";
+
+ pcie_phy0: phy@86200 {
+ reg = <0x86200 0x16c>,
+ <0x86400 0x200>,
+ <0x86800 0x4f4>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "pcie_0_pipe_clk";
+ };
};
- pcie_phy1: phy@8e000 {
+ pcie_qmp1: phy@8e000 {
compatible = "qcom,ipq8074-qmp-pcie-phy";
reg = <0x0008e000 0x1000>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
- clock-names = "pipe_clk";
- clock-output-names = "pcie20_phy1_pipe_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+ <&gcc GCC_PCIE1_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
resets = <&gcc GCC_PCIE1_PHY_BCR>,
<&gcc GCC_PCIE1PHY_PHY_BCR>;
reset-names = "phy",
"common";
status = "disabled";
+
+ pcie_phy1: phy@8e200 {
+ reg = <0x8e200 0x16c>,
+ <0x8e400 0x200>,
+ <0x8e800 0x4f4>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "pcie_1_pipe_clk";
+ };
};
prng: rng@e3000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 09/10] arm64: dts: qcom: ipq8074-hk01: Add dummy supply for QMP USB3 PHY
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
` (7 preceding siblings ...)
2021-09-29 3:42 ` [PATCH 08/10] arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
2021-09-29 3:42 ` [PATCH 10/10] ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node Shawn Guo
9 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
Per QMP PHY bindings schema, 'vdda-phy-supply' and 'vdda-phy-supply' are
required for IPQ8074 QMP USB3 PHY. Since supplies are not added in DTS
for this platform, add a dummy regulator as the supply to QMP USB3 PHY,
so that dtbs_check stops complaining the missing supplies.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index cc08dc4eb56a..b5e1eaa367bf 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -24,6 +24,8 @@
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
+
+ vreg_dummy: regulator-dummy { };
};
&blsp1_i2c2 {
@@ -97,10 +99,14 @@
&ssphy_0 {
status = "okay";
+ vdda-phy-supply = <&vreg_dummy>;
+ vdda-pll-supply = <&vreg_dummy>;
};
&ssphy_1 {
status = "okay";
+ vdda-phy-supply = <&vreg_dummy>;
+ vdda-pll-supply = <&vreg_dummy>;
};
&usb_0 {
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 10/10] ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
` (8 preceding siblings ...)
2021-09-29 3:42 ` [PATCH 09/10] arm64: dts: qcom: ipq8074-hk01: Add dummy supply for QMP USB3 PHY Shawn Guo
@ 2021-09-29 3:42 ` Shawn Guo
9 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2021-09-29 3:42 UTC (permalink / raw)
To: Vinod Koul, Rob Herring
Cc: Bjorn Andersson, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
'#clock-cells' is a required property of QMP PHY child node, not itself.
Drop it to fix the dtbs_check warnings below.
qcom-sdx55-t55.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
qcom-sdx55-mtp.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
qcom-sdx55-telit-fn980-tlb.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 1e6ce035f76a..44526ad9d210 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -228,7 +228,6 @@
compatible = "qcom,sdx55-qmp-usb3-uni-phy";
reg = <0x00ff6000 0x1c0>;
status = "disabled";
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH 01/10] dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent node
2021-09-29 3:42 ` [PATCH 01/10] dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent node Shawn Guo
@ 2021-10-04 18:41 ` Rob Herring
2021-10-05 6:34 ` Vinod Koul
1 sibling, 0 replies; 20+ messages in thread
From: Rob Herring @ 2021-10-04 18:41 UTC (permalink / raw)
To: Shawn Guo
Cc: linux-kernel, Bjorn Andersson, Vinod Koul, linux-phy, devicetree,
linux-arm-msm, Rob Herring
On Wed, 29 Sep 2021 11:42:44 +0800, Shawn Guo wrote:
> '#clock-cells' is not required for parent qmp-phy node but the child
> phy/lane node.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 5 -----
> 1 file changed, 5 deletions(-)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
2021-09-29 3:42 ` [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply Shawn Guo
@ 2021-10-04 18:43 ` Rob Herring
2021-10-05 6:34 ` Vinod Koul
2021-10-20 13:06 ` [PATCH RESEND " Shawn Guo
2 siblings, 0 replies; 20+ messages in thread
From: Rob Herring @ 2021-10-04 18:43 UTC (permalink / raw)
To: Shawn Guo
Cc: linux-arm-msm, devicetree, linux-phy, Bjorn Andersson,
linux-kernel, Rob Herring, Vinod Koul
On Wed, 29 Sep 2021 11:42:45 +0800, Shawn Guo wrote:
> The qmp-phy driver suggests that 'vdda-phy-supply' and 'vdda-pll-supply'
> are not required for IPQ6018 and IPQ8074 QMP PCIe PHY. Update the
> bindings to reflect it.
>
> While at it, also correct the clock properies for IPQ8074 QMP PCIe PHY.
> And as the result, 'qcom,ipq8074-qmp-pcie-phy' and
> 'qcom,ipq6018-qmp-pcie-phy' share the same clock, reset and supply
> bindings.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 52 ++++++++++---------
> 1 file changed, 28 insertions(+), 24 deletions(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 01/10] dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent node
2021-09-29 3:42 ` [PATCH 01/10] dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent node Shawn Guo
2021-10-04 18:41 ` Rob Herring
@ 2021-10-05 6:34 ` Vinod Koul
1 sibling, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2021-10-05 6:34 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, Bjorn Andersson, linux-phy, devicetree,
linux-arm-msm, linux-kernel
On 29-09-21, 11:42, Shawn Guo wrote:
> '#clock-cells' is not required for parent qmp-phy node but the child
> phy/lane node.
Acked-By: Vinod Koul <vkoul@kernel.org>
--
~Vinod
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
2021-09-29 3:42 ` [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply Shawn Guo
2021-10-04 18:43 ` Rob Herring
@ 2021-10-05 6:34 ` Vinod Koul
2021-10-05 15:47 ` Bjorn Andersson
2021-10-20 13:06 ` [PATCH RESEND " Shawn Guo
2 siblings, 1 reply; 20+ messages in thread
From: Vinod Koul @ 2021-10-05 6:34 UTC (permalink / raw)
To: Shawn Guo
Cc: Rob Herring, Bjorn Andersson, linux-phy, devicetree,
linux-arm-msm, linux-kernel
On 29-09-21, 11:42, Shawn Guo wrote:
> The qmp-phy driver suggests that 'vdda-phy-supply' and 'vdda-pll-supply'
> are not required for IPQ6018 and IPQ8074 QMP PCIe PHY. Update the
> bindings to reflect it.
>
> While at it, also correct the clock properies for IPQ8074 QMP PCIe PHY.
> And as the result, 'qcom,ipq8074-qmp-pcie-phy' and
> 'qcom,ipq6018-qmp-pcie-phy' share the same clock, reset and supply
> bindings.
Acked-By: Vinod Koul <vkoul@kernel.org>
--
~Vinod
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
2021-10-05 6:34 ` Vinod Koul
@ 2021-10-05 15:47 ` Bjorn Andersson
2021-10-07 8:56 ` Vinod Koul
0 siblings, 1 reply; 20+ messages in thread
From: Bjorn Andersson @ 2021-10-05 15:47 UTC (permalink / raw)
To: Vinod Koul
Cc: Shawn Guo, Rob Herring, linux-phy, devicetree, linux-arm-msm,
linux-kernel
On Mon 04 Oct 23:34 PDT 2021, Vinod Koul wrote:
> On 29-09-21, 11:42, Shawn Guo wrote:
> > The qmp-phy driver suggests that 'vdda-phy-supply' and 'vdda-pll-supply'
> > are not required for IPQ6018 and IPQ8074 QMP PCIe PHY. Update the
> > bindings to reflect it.
> >
> > While at it, also correct the clock properies for IPQ8074 QMP PCIe PHY.
> > And as the result, 'qcom,ipq8074-qmp-pcie-phy' and
> > 'qcom,ipq6018-qmp-pcie-phy' share the same clock, reset and supply
> > bindings.
>
> Acked-By: Vinod Koul <vkoul@kernel.org>
>
I think it's better if you take the two dt-bindings through your tree,
so we avoid any potential merge conflicts related to possible other
changes.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
2021-10-05 15:47 ` Bjorn Andersson
@ 2021-10-07 8:56 ` Vinod Koul
2021-10-19 18:07 ` Vinod Koul
0 siblings, 1 reply; 20+ messages in thread
From: Vinod Koul @ 2021-10-07 8:56 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Shawn Guo, Rob Herring, linux-phy, devicetree, linux-arm-msm,
linux-kernel
On 05-10-21, 08:47, Bjorn Andersson wrote:
> On Mon 04 Oct 23:34 PDT 2021, Vinod Koul wrote:
>
> > On 29-09-21, 11:42, Shawn Guo wrote:
> > > The qmp-phy driver suggests that 'vdda-phy-supply' and 'vdda-pll-supply'
> > > are not required for IPQ6018 and IPQ8074 QMP PCIe PHY. Update the
> > > bindings to reflect it.
> > >
> > > While at it, also correct the clock properies for IPQ8074 QMP PCIe PHY.
> > > And as the result, 'qcom,ipq8074-qmp-pcie-phy' and
> > > 'qcom,ipq6018-qmp-pcie-phy' share the same clock, reset and supply
> > > bindings.
> >
> > Acked-By: Vinod Koul <vkoul@kernel.org>
> >
>
> I think it's better if you take the two dt-bindings through your tree,
> so we avoid any potential merge conflicts related to possible other
> changes.
Okay picked up the binding patches
--
~Vinod
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
2021-10-07 8:56 ` Vinod Koul
@ 2021-10-19 18:07 ` Vinod Koul
0 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2021-10-19 18:07 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Shawn Guo, Rob Herring, linux-phy, devicetree, linux-arm-msm,
linux-kernel
Hi Shawn,
On 07-10-21, 14:26, Vinod Koul wrote:
> On 05-10-21, 08:47, Bjorn Andersson wrote:
> > On Mon 04 Oct 23:34 PDT 2021, Vinod Koul wrote:
> >
> > > On 29-09-21, 11:42, Shawn Guo wrote:
> > > > The qmp-phy driver suggests that 'vdda-phy-supply' and 'vdda-pll-supply'
> > > > are not required for IPQ6018 and IPQ8074 QMP PCIe PHY. Update the
> > > > bindings to reflect it.
> > > >
> > > > While at it, also correct the clock properies for IPQ8074 QMP PCIe PHY.
> > > > And as the result, 'qcom,ipq8074-qmp-pcie-phy' and
> > > > 'qcom,ipq6018-qmp-pcie-phy' share the same clock, reset and supply
> > > > bindings.
> > >
> > > Acked-By: Vinod Koul <vkoul@kernel.org>
> > >
> >
> > I think it's better if you take the two dt-bindings through your tree,
> > so we avoid any potential merge conflicts related to possible other
> > changes.
>
> Okay picked up the binding patches
This failed to apply for me, can you please rebase and send
Thanks
--
~Vinod
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH RESEND 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
2021-09-29 3:42 ` [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply Shawn Guo
2021-10-04 18:43 ` Rob Herring
2021-10-05 6:34 ` Vinod Koul
@ 2021-10-20 13:06 ` Shawn Guo
2021-10-20 15:33 ` Vinod Koul
2 siblings, 1 reply; 20+ messages in thread
From: Shawn Guo @ 2021-10-20 13:06 UTC (permalink / raw)
To: Vinod Koul
Cc: Bjorn Andersson, Rob Herring, linux-phy, devicetree,
linux-arm-msm, linux-kernel, Shawn Guo
The qmp-phy driver suggests that 'vdda-phy-supply' and 'vdda-pll-supply'
are not required for IPQ6018 and IPQ8074 QMP PCIe PHY. Update the
bindings to reflect it.
While at it, also correct the clock properies for IPQ8074 QMP PCIe PHY.
And as the result, 'qcom,ipq8074-qmp-pcie-phy' and
'qcom,ipq6018-qmp-pcie-phy' share the same clock, reset and supply
bindings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
Rebase to resolve conflict during applying.
.../devicetree/bindings/phy/qcom,qmp-phy.yaml | 55 +++++++++++--------
1 file changed, 31 insertions(+), 24 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 99aa2d08dfcb..688a63ca1936 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -113,8 +113,6 @@ required:
- clock-names
- resets
- reset-names
- - vdda-phy-supply
- - vdda-pll-supply
additionalProperties: false
@@ -147,6 +145,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -173,6 +174,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -201,6 +205,9 @@ allOf:
- const: phy
- const: common
- const: cfg
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -230,6 +237,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -250,6 +260,9 @@ allOf:
reset-names:
items:
- const: ufsphy
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -275,34 +288,16 @@ allOf:
reset-names:
items:
- const: ufsphy
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,ipq8074-qmp-pcie-phy
- then:
- properties:
- clocks:
- items:
- - description: pipe clk.
- clock-names:
- items:
- - const: pipe_clk
- resets:
- items:
- - description: reset of phy block.
- - description: phy common block reset.
- reset-names:
- items:
- - const: phy
- - const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq6018-qmp-pcie-phy
+ - qcom,ipq8074-qmp-pcie-phy
then:
properties:
clocks:
@@ -353,6 +348,9 @@ allOf:
reset-names:
items:
- const: phy
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -384,6 +382,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -411,6 +412,9 @@ allOf:
items:
- const: phy
- const: common
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
- if:
properties:
compatible:
@@ -437,6 +441,9 @@ allOf:
items:
- const: phy_phy
- const: phy
+ required:
+ - vdda-phy-supply
+ - vdda-pll-supply
examples:
- |
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH RESEND 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
2021-10-20 13:06 ` [PATCH RESEND " Shawn Guo
@ 2021-10-20 15:33 ` Vinod Koul
0 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2021-10-20 15:33 UTC (permalink / raw)
To: Shawn Guo
Cc: Bjorn Andersson, Rob Herring, linux-phy, devicetree,
linux-arm-msm, linux-kernel
On 20-10-21, 21:06, Shawn Guo wrote:
> The qmp-phy driver suggests that 'vdda-phy-supply' and 'vdda-pll-supply'
> are not required for IPQ6018 and IPQ8074 QMP PCIe PHY. Update the
> bindings to reflect it.
>
> While at it, also correct the clock properies for IPQ8074 QMP PCIe PHY.
s/properies/properties
> And as the result, 'qcom,ipq8074-qmp-pcie-phy' and
> 'qcom,ipq6018-qmp-pcie-phy' share the same clock, reset and supply
> bindings.
I have fixed that up while applying and also picked the Ack from Rob
(please pick those when resending)
Thanks
--
~Vinod
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2021-10-20 15:33 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-29 3:42 [PATCH 00/10] Make Qualcomm QMP PHY dtbs_check warning free Shawn Guo
2021-09-29 3:42 ` [PATCH 01/10] dt-bindings: phy: qcom,qmp: '#clock-cells' is not required for parent node Shawn Guo
2021-10-04 18:41 ` Rob Herring
2021-10-05 6:34 ` Vinod Koul
2021-09-29 3:42 ` [PATCH 02/10] dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply Shawn Guo
2021-10-04 18:43 ` Rob Herring
2021-10-05 6:34 ` Vinod Koul
2021-10-05 15:47 ` Bjorn Andersson
2021-10-07 8:56 ` Vinod Koul
2021-10-19 18:07 ` Vinod Koul
2021-10-20 13:06 ` [PATCH RESEND " Shawn Guo
2021-10-20 15:33 ` Vinod Koul
2021-09-29 3:42 ` [PATCH 03/10] arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node Shawn Guo
2021-09-29 3:42 ` [PATCH 04/10] arm64: dts: qcom: Correct QMP PHY child node name Shawn Guo
2021-09-29 3:42 ` [PATCH 05/10] arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHY Shawn Guo
2021-09-29 3:42 ` [PATCH 06/10] arm64: dts: qcom: Drop reg-names from QMP PHY nodes Shawn Guo
2021-09-29 3:42 ` [PATCH 07/10] arm64: dts: qcom: msm8998-clamshell: Add missing vdda supplies Shawn Guo
2021-09-29 3:42 ` [PATCH 08/10] arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes Shawn Guo
2021-09-29 3:42 ` [PATCH 09/10] arm64: dts: qcom: ipq8074-hk01: Add dummy supply for QMP USB3 PHY Shawn Guo
2021-09-29 3:42 ` [PATCH 10/10] ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).