From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org, linux-crypto@vger.kernel.org
Cc: bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, agross@kernel.org,
herbert@gondor.apana.org.au, davem@davemloft.net,
Thara Gopinath <thara.gopinath@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: [PATCH v4 01/20] arm64/dts: qcom: Fix 'dma' & 'qcom,controlled-remotely' nodes in dts
Date: Wed, 13 Oct 2021 16:25:22 +0530 [thread overview]
Message-ID: <20211013105541.68045-2-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20211013105541.68045-1-bhupesh.sharma@linaro.org>
Preparatory patch for subsequent patch in this series which
converts the qcom_bam_dma device-tree binding into YAML format.
A few qcom device-tree files define dma-controller nodes
with non-standard 'node names' and also set
the bool property 'qcom,controlled-remotely' incorrectly, which
leads to following errors with 'make dtbs_check':
$ arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml:
dma@1dc4000: $nodename:0: 'dma@1dc4000' does not match
'^dma-controller(@.*)?$'
$ arch/arm64/boot/dts/qcom/sm8250-mtp.dt.yaml:
dma@1dc4000: qcom,controlled-remotely: 'oneOf' conditional
failed, one must be fixed:
[[1]] is not of type 'boolean'
True was expected
[[1]] is not of type 'null'
Fix the same.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
5 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index d2fe58e0eb7a..7b6205c180df 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -200,7 +200,7 @@ cryptobam: dma-controller@704000 {
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <1>;
- qcom,controlled-remotely = <1>;
+ qcom,controlled-remotely;
qcom,config-pipe-trust-reg = <0>;
};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index db333001df4d..99668e84953e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -212,7 +212,7 @@ prng: rng@e3000 {
status = "disabled";
};
- cryptobam: dma@704000 {
+ cryptobam: dma-controller@704000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x00704000 0x20000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -220,7 +220,7 @@ cryptobam: dma@704000 {
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <1>;
- qcom,controlled-remotely = <1>;
+ qcom,controlled-remotely;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 52df22ab3f6a..390468e1b62e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2686,7 +2686,7 @@ sdhc2: sdhci@74a4900 {
status = "disabled";
};
- blsp1_dma: dma@7544000 {
+ blsp1_dma: dma-controller@7544000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07544000 0x2b000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -2743,7 +2743,7 @@ blsp1_i2c3: i2c@7577000 {
status = "disabled";
};
- blsp2_dma: dma@7584000 {
+ blsp2_dma: dma-controller@7584000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07584000 0x2b000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 34039b5c8017..a46838f1e310 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2187,7 +2187,7 @@ blsp1_i2c6: i2c@c17a000 {
#size-cells = <0>;
};
- blsp2_dma: dma@c184000 {
+ blsp2_dma: dma-controller@c184000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0c184000 0x25000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b3b911926184..72ec48c4e03c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2312,7 +2312,7 @@ ufs_mem_phy_lanes: lanes@1d87400 {
};
};
- cryptobam: dma@1dc4000 {
+ cryptobam: dma-controller@1dc4000 {
compatible = "qcom,bam-v1.7.0";
reg = <0 0x01dc4000 0 0x24000>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
@@ -2320,7 +2320,7 @@ cryptobam: dma@1dc4000 {
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
- qcom,controlled-remotely = <1>;
+ qcom,controlled-remotely;
iommus = <&apps_smmu 0x704 0x1>,
<&apps_smmu 0x706 0x1>,
<&apps_smmu 0x714 0x1>,
--
2.31.1
next prev parent reply other threads:[~2021-10-13 10:56 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-13 10:55 [PATCH v4 00/20] Enable Qualcomm Crypto Engine on sm8250 Bhupesh Sharma
2021-10-13 10:55 ` Bhupesh Sharma [this message]
2021-10-13 10:55 ` [PATCH v4 02/20] arm64/dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 03/20] arm64/dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 04/20] dt-bindings: qcom-bam: Convert binding to YAML Bhupesh Sharma
2021-10-13 12:56 ` Vladimir Zapolskiy
2021-10-13 17:13 ` Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 05/20] dt-bindings: qcom-bam: Add 'interconnects' & 'interconnect-names' to optional properties Bhupesh Sharma
2021-10-13 13:03 ` Vladimir Zapolskiy
2021-10-13 17:14 ` Bhupesh Sharma
2021-10-13 18:39 ` Rob Herring
2021-10-14 7:03 ` Bhupesh Sharma
2021-10-24 13:55 ` Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 06/20] dt-bindings: qcom-bam: Add 'iommus' " Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 07/20] dt-bindings: qcom-qce: Convert bindings to yaml Bhupesh Sharma
2021-10-13 13:05 ` Vladimir Zapolskiy
2021-10-13 17:15 ` Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 08/20] dt-bindings: qcom-qce: Add 'interconnects' and move 'clocks' to optional properties Bhupesh Sharma
2021-10-26 19:40 ` Rob Herring
2021-10-13 10:55 ` [PATCH v4 09/20] dt-bindings: qcom-qce: Add 'iommus' " Bhupesh Sharma
2021-10-26 19:40 ` Rob Herring
2021-10-13 10:55 ` [PATCH v4 10/20] arm64/dts: qcom: sdm845: Use RPMH_CE_CLK macro directly Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 11/20] dt-bindings: crypto : Add new compatible strings for qcom-qce Bhupesh Sharma
2021-10-18 18:26 ` Rob Herring
2021-10-13 10:55 ` [PATCH v4 12/20] arm64/dts: qcom: Use new compatibles for crypto nodes Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 13/20] dma: qcom: bam_dma: Add support to initialize interconnect path Bhupesh Sharma
2021-10-13 19:15 ` Vladimir Zapolskiy
2021-10-24 13:53 ` Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 14/20] crypto: qce: core: " Bhupesh Sharma
2021-10-13 19:19 ` Vladimir Zapolskiy
2021-10-24 13:53 ` Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 15/20] crypto: qce: Add new compatibles for qce crypto driver Bhupesh Sharma
2021-10-13 19:22 ` Vladimir Zapolskiy
2021-10-20 14:07 ` Thara Gopinath
2021-10-24 13:52 ` Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 16/20] crypto: qce: core: Make clocks optional Bhupesh Sharma
2021-10-13 19:23 ` Vladimir Zapolskiy
2021-10-24 13:34 ` Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 17/20] crypto: qce: Print a failure msg in case probe() fails Bhupesh Sharma
2021-10-13 19:26 ` Vladimir Zapolskiy
2021-10-24 13:33 ` Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 18/20] crypto: qce: Defer probing if BAM dma channel is not yet initialized Bhupesh Sharma
2021-10-13 20:49 ` Vladimir Zapolskiy
2021-10-14 7:40 ` Bhupesh Sharma
2021-10-14 8:42 ` Vladimir Zapolskiy
2021-10-20 14:10 ` Thara Gopinath
2021-10-24 14:05 ` Bhupesh Sharma
2021-10-13 10:55 ` [PATCH v4 19/20] crypto: qce: Add 'sm8250-qce' compatible string check Bhupesh Sharma
2021-10-20 14:11 ` Thara Gopinath
2021-10-13 10:55 ` [PATCH v4 20/20] arm64/dts: qcom: sm8250: Add dt entries to support crypto engine Bhupesh Sharma
2021-10-20 14:03 ` [PATCH v4 00/20] Enable Qualcomm Crypto Engine on sm8250 Thara Gopinath
2021-10-24 13:58 ` Bhupesh Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211013105541.68045-2-bhupesh.sharma@linaro.org \
--to=bhupesh.sharma@linaro.org \
--cc=agross@kernel.org \
--cc=bhupesh.linux@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=thara.gopinath@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).