[PATCH AUTOSEL 5.10 01/14] gcc-plugins/structleak: add makefile var for disabling structleak

[PATCH AUTOSEL 5.10 01/14] gcc-plugins/structleak: add makefile var for disabling structleak

[Sasha Levin]

From: Brendan Higgins <brendanhiggins@google.com>

[ Upstream commit 554afc3b9797511e3245864e32aebeb6abbab1e3 ]

KUnit and structleak don't play nice, so add a makefile variable for
enabling structleak when it complains.

Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Makefile.gcc-plugins | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/scripts/Makefile.gcc-plugins b/scripts/Makefile.gcc-plugins
index 952e46876329..4aad28480035 100644
--- a/scripts/Makefile.gcc-plugins
+++ b/scripts/Makefile.gcc-plugins
@@ -19,6 +19,10 @@ gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF)		\
 		+= -fplugin-arg-structleak_plugin-byref
 gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL)	\
 		+= -fplugin-arg-structleak_plugin-byref-all
+ifdef CONFIG_GCC_PLUGIN_STRUCTLEAK
+    DISABLE_STRUCTLEAK_PLUGIN += -fplugin-arg-structleak_plugin-disable
+endif
+export DISABLE_STRUCTLEAK_PLUGIN
 gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK)		\
 		+= -DSTRUCTLEAK_PLUGIN
 
-- 
2.33.0

[PATCH AUTOSEL 5.10 02/14] ALSA: hda: intel: Allow repeatedly probing on codec configuration errors

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c0f1886de7e173865f1a0fa7680a1c07954a987f ]

It seems that a few recent AMD systems show the codec configuration
errors at the early boot, while loading the driver at a later stage
works magically.  Although the root cause of the error isn't clear,
it's certainly not bad to allow retrying the codec probe in such a
case if that helps.

This patch adds the capability for retrying the probe upon codec probe
errors on the certain AMD platforms.  The probe_work is changed to a
delayed work, and at the secondary call, it'll jump to the codec
probing.

Note that, not only adding the re-probing, this includes the behavior
changes in the codec configuration function.  Namely,
snd_hda_codec_configure() won't unregister the codec at errors any
longer.  Instead, its caller, azx_codec_configure() unregisters the
codecs with the probe failures *if* any codec has been successfully
configured.  If all codec probe failed, it doesn't unregister but let
it re-probed -- which is the most case we're seeing and this patch
tries to improve.

Even if the driver doesn't re-probe or give up, it will go to the
"free-all" error path, hence the leftover codecs shall be disabled /
deleted in anyway.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190801
Link: https://lore.kernel.org/r/20211006141940.2897-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/hda_codec.h      |  1 +
 sound/pci/hda/hda_bind.c       | 20 +++++++++++---------
 sound/pci/hda/hda_codec.c      |  1 +
 sound/pci/hda/hda_controller.c | 24 ++++++++++++++++--------
 sound/pci/hda/hda_controller.h |  2 +-
 sound/pci/hda/hda_intel.c      | 29 +++++++++++++++++++++++------
 sound/pci/hda/hda_intel.h      |  4 +++-
 7 files changed, 56 insertions(+), 25 deletions(-)

diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
index 73827b7d17e0..cf530e9fb5f5 100644
--- a/include/sound/hda_codec.h
+++ b/include/sound/hda_codec.h
@@ -225,6 +225,7 @@ struct hda_codec {
 #endif
 
 	/* misc flags */
+	unsigned int configured:1; /* codec was configured */
 	unsigned int in_freeing:1; /* being released */
 	unsigned int registered:1; /* codec was registered */
 	unsigned int display_power_control:1; /* needs display power */
diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c
index 17a25e453f60..4efbcc41fdfb 100644
--- a/sound/pci/hda/hda_bind.c
+++ b/sound/pci/hda/hda_bind.c
@@ -301,29 +301,31 @@ int snd_hda_codec_configure(struct hda_codec *codec)
 {
 	int err;
 
+	if (codec->configured)
+		return 0;
+
 	if (is_generic_config(codec))
 		codec->probe_id = HDA_CODEC_ID_GENERIC;
 	else
 		codec->probe_id = 0;
 
-	err = snd_hdac_device_register(&codec->core);
-	if (err < 0)
-		return err;
+	if (!device_is_registered(&codec->core.dev)) {
+		err = snd_hdac_device_register(&codec->core);
+		if (err < 0)
+			return err;
+	}
 
 	if (!codec->preset)
 		codec_bind_module(codec);
 	if (!codec->preset) {
 		err = codec_bind_generic(codec);
 		if (err < 0) {
-			codec_err(codec, "Unable to bind the codec\n");
-			goto error;
+			codec_dbg(codec, "Unable to bind the codec\n");
+			return err;
 		}
 	}
 
+	codec->configured = 1;
 	return 0;
-
- error:
-	snd_hdac_device_unregister(&codec->core);
-	return err;
 }
 EXPORT_SYMBOL_GPL(snd_hda_codec_configure);
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 4cec1bd77e6f..6dece719be66 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -791,6 +791,7 @@ void snd_hda_codec_cleanup_for_unbind(struct hda_codec *codec)
 	snd_array_free(&codec->nids);
 	remove_conn_list(codec);
 	snd_hdac_regmap_exit(&codec->core);
+	codec->configured = 0;
 }
 EXPORT_SYMBOL_GPL(snd_hda_codec_cleanup_for_unbind);
 
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index b972d59eb1ec..3de7dc34def2 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -25,6 +25,7 @@
 #include <sound/core.h>
 #include <sound/initval.h>
 #include "hda_controller.h"
+#include "hda_local.h"
 
 #define CREATE_TRACE_POINTS
 #include "hda_controller_trace.h"
@@ -1259,17 +1260,24 @@ EXPORT_SYMBOL_GPL(azx_probe_codecs);
 int azx_codec_configure(struct azx *chip)
 {
 	struct hda_codec *codec, *next;
+	int success = 0;
 
-	/* use _safe version here since snd_hda_codec_configure() deregisters
-	 * the device upon error and deletes itself from the bus list.
-	 */
-	list_for_each_codec_safe(codec, next, &chip->bus) {
-		snd_hda_codec_configure(codec);
+	list_for_each_codec(codec, &chip->bus) {
+		if (!snd_hda_codec_configure(codec))
+			success++;
 	}
 
-	if (!azx_bus(chip)->num_codecs)
-		return -ENODEV;
-	return 0;
+	if (success) {
+		/* unregister failed codecs if any codec has been probed */
+		list_for_each_codec_safe(codec, next, &chip->bus) {
+			if (!codec->configured) {
+				codec_err(codec, "Unable to configure, disabling\n");
+				snd_hdac_device_unregister(&codec->core);
+			}
+		}
+	}
+
+	return success ? 0 : -ENODEV;
 }
 EXPORT_SYMBOL_GPL(azx_codec_configure);
 
diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h
index 68f9668788ea..324cba13c7ba 100644
--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -41,7 +41,7 @@
 /* 24 unused */
 #define AZX_DCAPS_COUNT_LPIB_DELAY  (1 << 25)	/* Take LPIB as delay */
 #define AZX_DCAPS_PM_RUNTIME	(1 << 26)	/* runtime PM support */
-/* 27 unused */
+#define AZX_DCAPS_RETRY_PROBE	(1 << 27)	/* retry probe if no codec is configured */
 #define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28)	/* CORBRP clears itself after reset */
 #define AZX_DCAPS_NO_MSI64      (1 << 29)	/* Stick to 32-bit MSIs */
 #define AZX_DCAPS_SEPARATE_STREAM_TAG	(1 << 30) /* capture and playback use separate stream tag */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 4c8b281c3992..8bc27e7c0590 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -341,7 +341,8 @@ enum {
 /* quirks for AMD SB */
 #define AZX_DCAPS_PRESET_AMD_SB \
 	(AZX_DCAPS_NO_TCSEL | AZX_DCAPS_AMD_WORKAROUND |\
-	 AZX_DCAPS_SNOOP_TYPE(ATI) | AZX_DCAPS_PM_RUNTIME)
+	 AZX_DCAPS_SNOOP_TYPE(ATI) | AZX_DCAPS_PM_RUNTIME |\
+	 AZX_DCAPS_RETRY_PROBE)
 
 /* quirks for Nvidia */
 #define AZX_DCAPS_PRESET_NVIDIA \
@@ -1758,7 +1759,7 @@ static void azx_check_snoop_available(struct azx *chip)
 
 static void azx_probe_work(struct work_struct *work)
 {
-	struct hda_intel *hda = container_of(work, struct hda_intel, probe_work);
+	struct hda_intel *hda = container_of(work, struct hda_intel, probe_work.work);
 	azx_probe_continue(&hda->chip);
 }
 
@@ -1867,7 +1868,7 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 	}
 
 	/* continue probing in work context as may trigger request module */
-	INIT_WORK(&hda->probe_work, azx_probe_work);
+	INIT_DELAYED_WORK(&hda->probe_work, azx_probe_work);
 
 	*rchip = chip;
 
@@ -2202,7 +2203,7 @@ static int azx_probe(struct pci_dev *pci,
 #endif
 
 	if (schedule_probe)
-		schedule_work(&hda->probe_work);
+		schedule_delayed_work(&hda->probe_work, 0);
 
 	dev++;
 	if (chip->disabled)
@@ -2290,6 +2291,11 @@ static int azx_probe_continue(struct azx *chip)
 	int dev = chip->dev_index;
 	int err;
 
+	if (chip->disabled || hda->init_failed)
+		return -EIO;
+	if (hda->probe_retry)
+		goto probe_retry;
+
 	to_hda_bus(bus)->bus_probing = 1;
 	hda->probe_continued = 1;
 
@@ -2351,10 +2357,20 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 	}
 #endif
+
+ probe_retry:
 	if (bus->codec_mask && !(probe_only[dev] & 1)) {
 		err = azx_codec_configure(chip);
-		if (err < 0)
+		if (err) {
+			if ((chip->driver_caps & AZX_DCAPS_RETRY_PROBE) &&
+			    ++hda->probe_retry < 60) {
+				schedule_delayed_work(&hda->probe_work,
+						      msecs_to_jiffies(1000));
+				return 0; /* keep things up */
+			}
+			dev_err(chip->card->dev, "Cannot probe codecs, giving up\n");
 			goto out_free;
+		}
 	}
 
 	err = snd_card_register(chip->card);
@@ -2384,6 +2400,7 @@ static int azx_probe_continue(struct azx *chip)
 		display_power(chip, false);
 	complete_all(&hda->probe_wait);
 	to_hda_bus(bus)->bus_probing = 0;
+	hda->probe_retry = 0;
 	return 0;
 }
 
@@ -2409,7 +2426,7 @@ static void azx_remove(struct pci_dev *pci)
 		 * device during cancel_work_sync() call.
 		 */
 		device_unlock(&pci->dev);
-		cancel_work_sync(&hda->probe_work);
+		cancel_delayed_work_sync(&hda->probe_work);
 		device_lock(&pci->dev);
 
 		snd_card_free(card);
diff --git a/sound/pci/hda/hda_intel.h b/sound/pci/hda/hda_intel.h
index 3fb119f09040..0f39418f9328 100644
--- a/sound/pci/hda/hda_intel.h
+++ b/sound/pci/hda/hda_intel.h
@@ -14,7 +14,7 @@ struct hda_intel {
 
 	/* sync probing */
 	struct completion probe_wait;
-	struct work_struct probe_work;
+	struct delayed_work probe_work;
 
 	/* card list (for power_save trigger) */
 	struct list_head list;
@@ -30,6 +30,8 @@ struct hda_intel {
 	unsigned int freed:1; /* resources already released */
 
 	bool need_i915_power:1; /* the hda controller needs i915 power */
+
+	int probe_retry;	/* being probe-retry */
 };
 
 #endif
-- 
2.33.0

[PATCH AUTOSEL 5.10 03/14] btrfs: deal with errors when checking if a dir entry exists during log replay

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 77a5b9e3d14cbce49ceed2766b2003c034c066dc ]

Currently inode_in_dir() ignores errors returned from
btrfs_lookup_dir_index_item() and from btrfs_lookup_dir_item(), treating
any errors as if the directory entry does not exists in the fs/subvolume
tree, which is obviously not correct, as we can get errors such as -EIO
when reading extent buffers while searching the fs/subvolume's tree.

Fix that by making inode_in_dir() return the errors and making its only
caller, add_inode_ref(), deal with returned errors as well.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/tree-log.c | 47 ++++++++++++++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 18 deletions(-)

diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 7bf3936aceda..f7b9a0f06f05 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -894,9 +894,11 @@ static noinline int drop_one_dir_item(struct btrfs_trans_handle *trans,
 }
 
 /*
- * helper function to see if a given name and sequence number found
- * in an inode back reference are already in a directory and correctly
- * point to this inode
+ * See if a given name and sequence number found in an inode back reference are
+ * already in a directory and correctly point to this inode.
+ *
+ * Returns: < 0 on error, 0 if the directory entry does not exists and 1 if it
+ * exists.
  */
 static noinline int inode_in_dir(struct btrfs_root *root,
 				 struct btrfs_path *path,
@@ -905,29 +907,35 @@ static noinline int inode_in_dir(struct btrfs_root *root,
 {
 	struct btrfs_dir_item *di;
 	struct btrfs_key location;
-	int match = 0;
+	int ret = 0;
 
 	di = btrfs_lookup_dir_index_item(NULL, root, path, dirid,
 					 index, name, name_len, 0);
-	if (di && !IS_ERR(di)) {
+	if (IS_ERR(di)) {
+		if (PTR_ERR(di) != -ENOENT)
+			ret = PTR_ERR(di);
+		goto out;
+	} else if (di) {
 		btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location);
 		if (location.objectid != objectid)
 			goto out;
-	} else
+	} else {
 		goto out;
-	btrfs_release_path(path);
+	}
 
+	btrfs_release_path(path);
 	di = btrfs_lookup_dir_item(NULL, root, path, dirid, name, name_len, 0);
-	if (di && !IS_ERR(di)) {
-		btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location);
-		if (location.objectid != objectid)
-			goto out;
-	} else
+	if (IS_ERR(di)) {
+		ret = PTR_ERR(di);
 		goto out;
-	match = 1;
+	} else if (di) {
+		btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location);
+		if (location.objectid == objectid)
+			ret = 1;
+	}
 out:
 	btrfs_release_path(path);
-	return match;
+	return ret;
 }
 
 /*
@@ -1472,10 +1480,12 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans,
 		if (ret)
 			goto out;
 
-		/* if we already have a perfect match, we're done */
-		if (!inode_in_dir(root, path, btrfs_ino(BTRFS_I(dir)),
-					btrfs_ino(BTRFS_I(inode)), ref_index,
-					name, namelen)) {
+		ret = inode_in_dir(root, path, btrfs_ino(BTRFS_I(dir)),
+				   btrfs_ino(BTRFS_I(inode)), ref_index,
+				   name, namelen);
+		if (ret < 0) {
+			goto out;
+		} else if (ret == 0) {
 			/*
 			 * look for a conflicting back reference in the
 			 * metadata. if we find one we have to unlink that name
@@ -1533,6 +1543,7 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans,
 
 			btrfs_update_inode(trans, root, inode);
 		}
+		/* Else, ret == 1, we already have a perfect match, we're done. */
 
 		ref_ptr = (unsigned long)(ref_ptr + ref_struct_size) + namelen;
 		kfree(name);
-- 
2.33.0

[PATCH AUTOSEL 5.10 04/14] net: stmmac: add support for dwmac 3.40a

[Sasha Levin]

From: Herve Codina <herve.codina@bootlin.com>

[ Upstream commit 9cb1d19f47fafad7dcf7c8564e633440c946cfd7 ]

dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c   | 1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 8 ++++++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
index fad503820e04..b3365b34cac7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
@@ -71,6 +71,7 @@ static int dwmac_generic_probe(struct platform_device *pdev)
 
 static const struct of_device_id dwmac_generic_match[] = {
 	{ .compatible = "st,spear600-gmac"},
+	{ .compatible = "snps,dwmac-3.40a"},
 	{ .compatible = "snps,dwmac-3.50a"},
 	{ .compatible = "snps,dwmac-3.610"},
 	{ .compatible = "snps,dwmac-3.70a"},
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 53be8fc1d125..48186cd32ce1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -508,6 +508,14 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 		plat->pmt = 1;
 	}
 
+	if (of_device_is_compatible(np, "snps,dwmac-3.40a")) {
+		plat->has_gmac = 1;
+		plat->enh_desc = 1;
+		plat->tx_coe = 1;
+		plat->bugged_jumbo = 1;
+		plat->pmt = 1;
+	}
+
 	if (of_device_is_compatible(np, "snps,dwmac-4.00") ||
 	    of_device_is_compatible(np, "snps,dwmac-4.10a") ||
 	    of_device_is_compatible(np, "snps,dwmac-4.20a") ||
-- 
2.33.0

[PATCH AUTOSEL 5.10 05/14] ARM: dts: spear3xx: Fix gmac node

[Sasha Levin]

From: Herve Codina <herve.codina@bootlin.com>

[ Upstream commit 6636fec29cdf6665bd219564609e8651f6ddc142 ]

On SPEAr3xx, ethernet driver is not compatible with the SPEAr600
one.
Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and
needs some driver tuning compare to SPEAr600.

The v3.40 IP support was added to stmmac driver and this patch
fixes this issue and use the correct compatible string for
SPEAr3xx

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/spear3xx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index f266b7b03482..cc88ebe7a60c 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -47,7 +47,7 @@ dma@fc400000 {
 		};
 
 		gmac: eth@e0800000 {
-			compatible = "st,spear600-gmac";
+			compatible = "snps,dwmac-3.40a";
 			reg = <0xe0800000 0x8000>;
 			interrupts = <23 22>;
 			interrupt-names = "macirq", "eth_wake_irq";
-- 
2.33.0

[PATCH AUTOSEL 5.10 06/14] nfc: nci: fix the UAF of rf_conn_info object

[Sasha Levin]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit 1b1499a817c90fd1ce9453a2c98d2a01cca0e775 ]

The nci_core_conn_close_rsp_packet() function will release the conn_info
with given conn_id. However, it needs to set the rf_conn_info to NULL to
prevent other routines like nci_rf_intf_activated_ntf_packet() to trigger
the UAF.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/nfc/nci/rsp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/nfc/nci/rsp.c b/net/nfc/nci/rsp.c
index a48297b79f34..b0ed2b47ac43 100644
--- a/net/nfc/nci/rsp.c
+++ b/net/nfc/nci/rsp.c
@@ -277,6 +277,8 @@ static void nci_core_conn_close_rsp_packet(struct nci_dev *ndev,
 							 ndev->cur_conn_id);
 		if (conn_info) {
 			list_del(&conn_info->list);
+			if (conn_info == ndev->rf_conn_info)
+				ndev->rf_conn_info = NULL;
 			devm_kfree(&ndev->nfc_dev->dev, conn_info);
 		}
 	}
-- 
2.33.0

[PATCH AUTOSEL 5.10 07/14] isdn: cpai: check ctr->cnr to avoid array index out of bound

[Sasha Levin]

From: Xiaolong Huang <butterflyhuangxx@gmail.com>

[ Upstream commit 1f3e2e97c003f80c4b087092b225c8787ff91e4d ]

The cmtp_add_connection() would add a cmtp session to a controller
and run a kernel thread to process cmtp.

	__module_get(THIS_MODULE);
	session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d",
								session->num);

During this process, the kernel thread would call detach_capi_ctr()
to detach a register controller. if the controller
was not attached yet, detach_capi_ctr() would
trigger an array-index-out-bounds bug.

[   46.866069][ T6479] UBSAN: array-index-out-of-bounds in
drivers/isdn/capi/kcapi.c:483:21
[   46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]'
[   46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted
5.15.0-rc2+ #8
[   46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX,
1996), BIOS 1.14.0-2 04/01/2014
[   46.870107][ T6479] Call Trace:
[   46.870473][ T6479]  dump_stack_lvl+0x57/0x7d
[   46.870974][ T6479]  ubsan_epilogue+0x5/0x40
[   46.871458][ T6479]  __ubsan_handle_out_of_bounds.cold+0x43/0x48
[   46.872135][ T6479]  detach_capi_ctr+0x64/0xc0
[   46.872639][ T6479]  cmtp_session+0x5c8/0x5d0
[   46.873131][ T6479]  ? __init_waitqueue_head+0x60/0x60
[   46.873712][ T6479]  ? cmtp_add_msgpart+0x120/0x120
[   46.874256][ T6479]  kthread+0x147/0x170
[   46.874709][ T6479]  ? set_kthread_struct+0x40/0x40
[   46.875248][ T6479]  ret_from_fork+0x1f/0x30
[   46.875773][ T6479]

Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/capi/kcapi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index cb0afe897162..7313454e403a 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -480,6 +480,11 @@ int detach_capi_ctr(struct capi_ctr *ctr)
 
 	ctr_down(ctr, CAPI_CTR_DETACHED);
 
+	if (ctr->cnr < 1 || ctr->cnr - 1 >= CAPI_MAXCONTR) {
+		err = -EINVAL;
+		goto unlock_out;
+	}
+
 	if (capi_controller[ctr->cnr - 1] != ctr) {
 		err = -EINVAL;
 		goto unlock_out;
-- 
2.33.0

[PATCH AUTOSEL 5.10 08/14] isdn: mISDN: Fix sleeping function called from invalid context

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 6510e80a0b81b5d814e3aea6297ba42f5e76f73c ]

The driver can call card->isac.release() function from an atomic
context.

Fix this by calling this function after releasing the lock.

The following log reveals it:

[   44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018
[   44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe
[   44.169574 ] INFO: lockdep is turned off.
[   44.169899 ] irq event stamp: 0
[   44.170160 ] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[   44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00
[   44.171240 ] softirqs last  enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00
[   44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0
[   44.172318 ] Preemption disabled at:
[   44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet]
[   44.174441 ] Call Trace:
[   44.174630 ]  dump_stack_lvl+0xa8/0xd1
[   44.174912 ]  dump_stack+0x15/0x17
[   44.175166 ]  ___might_sleep+0x3a2/0x510
[   44.175459 ]  ? nj_release+0x69/0x500 [netjet]
[   44.175791 ]  __might_sleep+0x82/0xe0
[   44.176063 ]  ? start_flush_work+0x20/0x7b0
[   44.176375 ]  start_flush_work+0x33/0x7b0
[   44.176672 ]  ? trace_irq_enable_rcuidle+0x85/0x170
[   44.177034 ]  ? kasan_quarantine_put+0xaa/0x1f0
[   44.177372 ]  ? kasan_quarantine_put+0xaa/0x1f0
[   44.177711 ]  __flush_work+0x11a/0x1a0
[   44.177991 ]  ? flush_work+0x20/0x20
[   44.178257 ]  ? lock_release+0x13c/0x8f0
[   44.178550 ]  ? __kasan_check_write+0x14/0x20
[   44.178872 ]  ? do_raw_spin_lock+0x148/0x360
[   44.179187 ]  ? read_lock_is_recursive+0x20/0x20
[   44.179530 ]  ? __kasan_check_read+0x11/0x20
[   44.179846 ]  ? do_raw_spin_unlock+0x55/0x900
[   44.180168 ]  ? ____kasan_slab_free+0x116/0x140
[   44.180505 ]  ? _raw_spin_unlock_irqrestore+0x41/0x60
[   44.180878 ]  ? skb_queue_purge+0x1a3/0x1c0
[   44.181189 ]  ? kfree+0x13e/0x290
[   44.181438 ]  flush_work+0x17/0x20
[   44.181695 ]  mISDN_freedchannel+0xe8/0x100
[   44.182006 ]  isac_release+0x210/0x260 [mISDNipac]
[   44.182366 ]  nj_release+0xf6/0x500 [netjet]
[   44.182685 ]  nj_remove+0x48/0x70 [netjet]
[   44.182989 ]  pci_device_remove+0xa9/0x250

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/netjet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c
index 2a1ddd47a096..a52f275f8263 100644
--- a/drivers/isdn/hardware/mISDN/netjet.c
+++ b/drivers/isdn/hardware/mISDN/netjet.c
@@ -949,8 +949,8 @@ nj_release(struct tiger_hw *card)
 		nj_disable_hwirq(card);
 		mode_tiger(&card->bc[0], ISDN_P_NONE);
 		mode_tiger(&card->bc[1], ISDN_P_NONE);
-		card->isac.release(&card->isac);
 		spin_unlock_irqrestore(&card->lock, flags);
+		card->isac.release(&card->isac);
 		release_region(card->base, card->base_s);
 		card->base_s = 0;
 	}
-- 
2.33.0

[PATCH AUTOSEL 5.10 09/14] platform/x86: intel_scu_ipc: Update timeout value in comment

[Sasha Levin]

From: Prashant Malani <pmalani@chromium.org>

[ Upstream commit a0c5814b9933f25ecb6de169483c5b88cf632bca ]

The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .

Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_scu_ipc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index d9cf7f7602b0..daae5b5da827 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -247,7 +247,7 @@ static inline int busy_loop(struct intel_scu_ipc_dev *scu)
 	return -ETIMEDOUT;
 }
 
-/* Wait till ipc ioc interrupt is received or timeout in 3 HZ */
+/* Wait till ipc ioc interrupt is received or timeout in 10 HZ */
 static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
 {
 	int status;
-- 
2.33.0

[PATCH AUTOSEL 5.10 10/14] ALSA: hda: avoid write to STATESTS if controller is in reset

[Sasha Levin]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit b37a15188eae9d4c49c5bb035e0c8d4058e4d9b3 ]

The snd_hdac_bus_reset_link() contains logic to clear STATESTS register
before performing controller reset. This code dates back to an old
bugfix in commit e8a7f136f5ed ("[ALSA] hda-intel - Improve HD-audio
codec probing robustness"). Originally the code was added to
azx_reset().

The code was moved around in commit a41d122449be ("ALSA: hda - Embed bus
into controller object") and ended up to snd_hdac_bus_reset_link() and
called primarily via snd_hdac_bus_init_chip().

The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is
called when controller is not in reset. In this case, STATESTS can be
cleared. This can be useful e.g. when forcing a controller reset to retry
codec probe. A normal non-power-on reset will not clear the bits.

However, this old logic is problematic when controller is already in
reset. The HDA specification states that controller must be taken out of
reset before writing to registers other than GCTL.CRST (1.0a spec,
3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost
if the controller is already in reset per the HDA specification mentioned.

This has been harmless on older hardware. On newer generation of Intel
PCIe based HDA controllers, if configured to report issues, this write
will emit an unsupported request error. If ACPI Platform Error Interface
(APEI) is enabled in kernel, this will end up to kernel log.

Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if
the function is called when controller is not in reset. Otherwise
clearing the bits is not possible and should be skipped.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_controller.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index b98449fd92f3..522d1897659c 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -421,8 +421,9 @@ int snd_hdac_bus_reset_link(struct hdac_bus *bus, bool full_reset)
 	if (!full_reset)
 		goto skip_reset;
 
-	/* clear STATESTS */
-	snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK);
+	/* clear STATESTS if not in reset */
+	if (snd_hdac_chip_readb(bus, GCTL) & AZX_GCTL_RESET)
+		snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK);
 
 	/* reset controller */
 	snd_hdac_bus_enter_link_reset(bus);
-- 
2.33.0

[PATCH AUTOSEL 5.10 11/14] libperf tests: Fix test_stat_cpu

[Sasha Levin]

From: Shunsuke Nakamura <nakamura.shun@fujitsu.com>

[ Upstream commit 3ff6d64e68abc231955d216236615918797614ae ]

The `cpu` argument of perf_evsel__read() must specify the cpu index.

perf_cpu_map__for_each_cpu() is for iterating the cpu number (not index)
and is thus not appropriate for use with perf_evsel__read().

So, if there is an offline CPU, the cpu number specified in the argument
may point out of range because the cpu number and the cpu index are
different.

Fix test_stat_cpu().

Testing it:

  # make tests -C tools/lib/perf/
  make: Entering directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'
  running static:
  - running tests/test-cpumap.c...OK
  - running tests/test-threadmap.c...OK
  - running tests/test-evlist.c...OK
  - running tests/test-evsel.c...OK
  running dynamic:
  - running tests/test-cpumap.c...OK
  - running tests/test-threadmap.c...OK
  - running tests/test-evlist.c...OK
  - running tests/test-evsel.c...OK
  make: Leaving directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'

Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211011083704.4108720-1-nakamura.shun@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/perf/tests/test-evlist.c | 6 +++---
 tools/lib/perf/tests/test-evsel.c  | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/tools/lib/perf/tests/test-evlist.c b/tools/lib/perf/tests/test-evlist.c
index bd19cabddaf6..60b5d1801103 100644
--- a/tools/lib/perf/tests/test-evlist.c
+++ b/tools/lib/perf/tests/test-evlist.c
@@ -38,7 +38,7 @@ static int test_stat_cpu(void)
 		.type	= PERF_TYPE_SOFTWARE,
 		.config	= PERF_COUNT_SW_TASK_CLOCK,
 	};
-	int err, cpu, tmp;
+	int err, idx;
 
 	cpus = perf_cpu_map__new(NULL);
 	__T("failed to create cpus", cpus);
@@ -64,10 +64,10 @@ static int test_stat_cpu(void)
 	perf_evlist__for_each_evsel(evlist, evsel) {
 		cpus = perf_evsel__cpus(evsel);
 
-		perf_cpu_map__for_each_cpu(cpu, tmp, cpus) {
+		for (idx = 0; idx < perf_cpu_map__nr(cpus); idx++) {
 			struct perf_counts_values counts = { .val = 0 };
 
-			perf_evsel__read(evsel, cpu, 0, &counts);
+			perf_evsel__read(evsel, idx, 0, &counts);
 			__T("failed to read value for evsel", counts.val != 0);
 		}
 	}
diff --git a/tools/lib/perf/tests/test-evsel.c b/tools/lib/perf/tests/test-evsel.c
index 0ad82d7a2a51..2de98768d844 100644
--- a/tools/lib/perf/tests/test-evsel.c
+++ b/tools/lib/perf/tests/test-evsel.c
@@ -21,7 +21,7 @@ static int test_stat_cpu(void)
 		.type	= PERF_TYPE_SOFTWARE,
 		.config	= PERF_COUNT_SW_CPU_CLOCK,
 	};
-	int err, cpu, tmp;
+	int err, idx;
 
 	cpus = perf_cpu_map__new(NULL);
 	__T("failed to create cpus", cpus);
@@ -32,10 +32,10 @@ static int test_stat_cpu(void)
 	err = perf_evsel__open(evsel, cpus, NULL);
 	__T("failed to open evsel", err == 0);
 
-	perf_cpu_map__for_each_cpu(cpu, tmp, cpus) {
+	for (idx = 0; idx < perf_cpu_map__nr(cpus); idx++) {
 		struct perf_counts_values counts = { .val = 0 };
 
-		perf_evsel__read(evsel, cpu, 0, &counts);
+		perf_evsel__read(evsel, idx, 0, &counts);
 		__T("failed to read value for evsel", counts.val != 0);
 	}
 
-- 
2.33.0

[PATCH AUTOSEL 5.10 12/14] perf/x86/msr: Add Sapphire Rapids CPU support

[Sasha Levin]

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit 71920ea97d6d1d800ee8b51951dc3fda3f5dc698 ]

SMI_COUNT MSR is supported on Sapphire Rapids CPU.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1633551137-192083-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/msr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/events/msr.c b/arch/x86/events/msr.c
index 4be8f9cabd07..ca8ce64df2ce 100644
--- a/arch/x86/events/msr.c
+++ b/arch/x86/events/msr.c
@@ -68,6 +68,7 @@ static bool test_intel(int idx, void *data)
 	case INTEL_FAM6_BROADWELL_D:
 	case INTEL_FAM6_BROADWELL_G:
 	case INTEL_FAM6_BROADWELL_X:
+	case INTEL_FAM6_SAPPHIRERAPIDS_X:
 
 	case INTEL_FAM6_ATOM_SILVERMONT:
 	case INTEL_FAM6_ATOM_SILVERMONT_D:
-- 
2.33.0

[PATCH AUTOSEL 5.10 13/14] Input: snvs_pwrkey - add clk handling

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit d997cc1715df7b6c3df798881fb9941acf0079f8 ]

On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an
associated clock. Accessing the registers requires that this clock is
enabled. Binding the driver on at least i.MX7S and i.MX8MP while not
having the clock enabled results in a complete hang of the machine.
(This usually only happens if snvs_pwrkey is built as a module and the
rtc-snvs driver isn't already bound because at bootup the required clk
is on and only gets disabled when the clk framework disables unused clks
late during boot.)

This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add
snvs clock to pwrkey").

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/snvs_pwrkey.c | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 2f5e3ab5ed63..65286762b02a 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -3,6 +3,7 @@
 // Driver for the IMX SNVS ON/OFF Power Key
 // Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
 
+#include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/init.h>
@@ -99,6 +100,11 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void imx_snvs_pwrkey_disable_clk(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
 static void imx_snvs_pwrkey_act(void *pdata)
 {
 	struct pwrkey_drv_data *pd = pdata;
@@ -111,6 +117,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	struct pwrkey_drv_data *pdata;
 	struct input_dev *input;
 	struct device_node *np;
+	struct clk *clk;
 	int error;
 	u32 vid;
 
@@ -134,6 +141,28 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
 	}
 
+	clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Failed to get snvs clock (%pe)\n", clk);
+		return PTR_ERR(clk);
+	}
+
+	error = clk_prepare_enable(clk);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to enable snvs clock (%pe)\n",
+			ERR_PTR(error));
+		return error;
+	}
+
+	error = devm_add_action_or_reset(&pdev->dev,
+					 imx_snvs_pwrkey_disable_clk, clk);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to register clock cleanup handler (%pe)\n",
+			ERR_PTR(error));
+		return error;
+	}
+
 	pdata->wakeup = of_property_read_bool(np, "wakeup-source");
 
 	pdata->irq = platform_get_irq(pdev, 0);
-- 
2.33.0

[PATCH AUTOSEL 5.10 14/14] Input: xpad - add support for another USB ID of Nacon GC-100

[Sasha Levin]

From: Michael Cullen <michael@michaelcullen.name>

[ Upstream commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 ]

The Nacon GX100XF is already mapped, but it seems there is a Nacon
GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other
colours exist) with a different USB ID when in XInput mode.

Signed-off-by: Michael Cullen <michael@michaelcullen.name>
Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index e5f1e3cf9179..ba101afcfc27 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -331,6 +331,7 @@ static const struct xpad_device {
 	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
@@ -447,6 +448,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA Controllers */
 	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke X-Box One pad */
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
+	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	{ }
 };
 
-- 
2.33.0