linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Ulf Hansson" <ulf.hansson@linaro.org>,
	"Viresh Kumar" <vireshk@kernel.org>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Peter De Schrijver" <pdeschrijver@nvidia.com>,
	"Mikko Perttunen" <mperttunen@nvidia.com>,
	"Lee Jones" <lee.jones@linaro.org>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Nishanth Menon" <nm@ti.com>,
	"Adrian Hunter" <adrian.hunter@intel.com>,
	"Michael Turquette" <mturquette@baylibre.com>
Cc: linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-pwm@vger.kernel.org,
	linux-mmc@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-clk@vger.kernel.org, David Heidelberg <david@ixit.cz>
Subject: [PATCH v15 39/39] ARM: tegra20/30: Disable unused host1x hardware
Date: Sun, 14 Nov 2021 22:34:35 +0300	[thread overview]
Message-ID: <20211114193435.7705-40-digetx@gmail.com> (raw)
In-Reply-To: <20211114193435.7705-1-digetx@gmail.com>

MPE, VI, EPP and ISP were never used and we don't have drivers for them.
Since these modules are enabled by default in a device-tree, a device is
created for them, blocking voltage scaling because there is no driver to
bind, and thus, state of PMC driver is never synced. Disable them.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/boot/dts/tegra20.dtsi | 4 ++++
 arch/arm/boot/dts/tegra30.dtsi | 8 ++++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 7b69ffc57abe..8010b40d7377 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -59,6 +59,7 @@ mpe@54040000 {
 			reset-names = "mpe";
 			power-domains = <&pd_mpe>;
 			operating-points-v2 = <&mpe_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		vi@54080000 {
@@ -70,6 +71,7 @@ vi@54080000 {
 			reset-names = "vi";
 			power-domains = <&pd_venc>;
 			operating-points-v2 = <&vi_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		epp@540c0000 {
@@ -81,6 +83,7 @@ epp@540c0000 {
 			reset-names = "epp";
 			power-domains = <&pd_core>;
 			operating-points-v2 = <&epp_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		isp@54100000 {
@@ -91,6 +94,7 @@ isp@54100000 {
 			resets = <&tegra_car 23>;
 			reset-names = "isp";
 			power-domains = <&pd_venc>;
+			status = "disabled";
 		};
 
 		gr2d@54140000 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index c1be136aac7d..d961ce3761e6 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -145,6 +145,8 @@ mpe@54040000 {
 			operating-points-v2 = <&mpe_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_MPE>;
+
+			status = "disabled";
 		};
 
 		vi@54080000 {
@@ -158,6 +160,8 @@ vi@54080000 {
 			operating-points-v2 = <&vi_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_VI>;
+
+			status = "disabled";
 		};
 
 		epp@540c0000 {
@@ -171,6 +175,8 @@ epp@540c0000 {
 			operating-points-v2 = <&epp_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_EPP>;
+
+			status = "disabled";
 		};
 
 		isp@54100000 {
@@ -183,6 +189,8 @@ isp@54100000 {
 			power-domains = <&pd_venc>;
 
 			iommus = <&mc TEGRA_SWGROUP_ISP>;
+
+			status = "disabled";
 		};
 
 		gr2d@54140000 {
-- 
2.33.1


  parent reply	other threads:[~2021-11-14 19:42 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-14 19:33 [PATCH v15 00/39] NVIDIA Tegra power management patches for 5.17 Dmitry Osipenko
2021-11-14 19:33 ` [PATCH v15 01/39] soc/tegra: Enable runtime PM during OPP state-syncing Dmitry Osipenko
2021-11-14 19:33 ` [PATCH v15 02/39] soc/tegra: Add devm_tegra_core_dev_init_opp_table_common() Dmitry Osipenko
2021-11-14 19:33 ` [PATCH v15 03/39] soc/tegra: Don't print error message when OPPs not available Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 04/39] dt-bindings: clock: tegra-car: Document new clock sub-nodes Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 05/39] clk: tegra: Support runtime PM and power domain Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 06/39] dt-bindings: host1x: Document OPP and power domain properties Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 07/39] dt-bindings: host1x: Document Memory Client resets of Host1x, GR2D and GR3D Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 08/39] gpu: host1x: Add initial runtime PM and OPP support Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 09/39] gpu: host1x: Add host1x_channel_stop() Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 10/39] drm/tegra: dc: Support OPP and SoC core voltage scaling Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 11/39] drm/tegra: hdmi: Add OPP support Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 12/39] drm/tegra: gr2d: Support generic power domain and runtime PM Dmitry Osipenko
2021-11-28  5:47   ` Michał Mirosław
2021-11-28 21:50     ` Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 13/39] drm/tegra: gr3d: " Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 14/39] drm/tegra: vic: Stop channel on suspend Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 15/39] drm/tegra: nvdec: " Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 16/39] drm/tegra: submit: Remove pm_runtime_enabled() checks Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 17/39] drm/tegra: submit: Add missing pm_runtime_mark_last_busy() Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 18/39] usb: chipidea: tegra: Add runtime PM and OPP support Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 19/39] bus: tegra-gmi: " Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 20/39] pwm: tegra: " Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 21/39] mmc: sdhci-tegra: " Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 22/39] mtd: rawnand: tegra: " Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 23/39] spi: tegra20-slink: Add " Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 24/39] media: dt: bindings: tegra-vde: Convert to schema Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 25/39] media: dt: bindings: tegra-vde: Document OPP and power domain Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 26/39] media: staging: tegra-vde: Support generic " Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 27/39] soc/tegra: fuse: Reset hardware Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 28/39] soc/tegra: fuse: Use resource-managed helpers Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 29/39] soc/tegra: regulators: Prepare for suspend Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 30/39] soc/tegra: pmc: Rename 3d power domains Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 31/39] soc/tegra: pmc: Rename core power domain Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 32/39] soc/tegra: pmc: Enable core domain support for Tegra20 and Tegra30 Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 33/39] ARM: tegra: Rename CPU and EMC OPP table device-tree nodes Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 34/39] ARM: tegra: Add 500MHz entry to Tegra30 memory OPP table Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 35/39] ARM: tegra: Add OPP tables and power domains to Tegra20 device-trees Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 36/39] ARM: tegra: Add OPP tables and power domains to Tegra30 device-trees Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 37/39] ARM: tegra: Add Memory Client resets to Tegra20 GR2D, GR3D and Host1x Dmitry Osipenko
2021-11-14 19:34 ` [PATCH v15 38/39] ARM: tegra: Add Memory Client resets to Tegra30 " Dmitry Osipenko
2021-11-14 19:34 ` Dmitry Osipenko [this message]
2021-11-28  5:40 ` [PATCH v15 00/39] NVIDIA Tegra power management patches for 5.17 Michał Mirosław
2021-11-28 22:03   ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211114193435.7705-40-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=adrian.hunter@intel.com \
    --cc=david@ixit.cz \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jonathanh@nvidia.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mperttunen@nvidia.com \
    --cc=mturquette@baylibre.com \
    --cc=nm@ti.com \
    --cc=pdeschrijver@nvidia.com \
    --cc=sboyd@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=ulf.hansson@linaro.org \
    --cc=vireshk@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).