[PATCH 0/2] ftrace: improve ftrace during compiling

[PATCH 0/2] ftrace: improve ftrace during compiling

[Yinan Liu]

Hi,
Some business scenarios require the kernel to start as quickly as possible, 
so recently we are optimizing some processing during the kernel startup phase.
When the kernel is started, ftrace_init() takes 15-20ms to execute. Almost 
all of the overhead belongs to the sorting and replacement of nop instructions, 
and other processing only accounts for about 300us. Advance the processing of 
these two parts to the compile time, and the time saved is very important 
for certain scenarios, such as the quick start of containers.

Yinan Liu (2):
  scripts: ftrace - move the sort-processing in ftrace_init to compile time
  scripts: ftrace - move the nop-processing in ftrace_init to compile time

 kernel/trace/ftrace.c   |   9 +++-
 scripts/link-vmlinux.sh |   6 +--
 scripts/recordmcount.h  |  14 +++++++
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 109 +++++++++++++++++++++++++++++++++++++++++++++++-
 5 files changed, 133 insertions(+), 7 deletions(-)

-- 
2.14.4.44.g2045bb6
+++++++++++++++++++++++++++++++++++++++++++++++-

[PATCH 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

When ftrace is enabled, ftrace_init will consume a period of
time, usually around 15~20 ms. Approximately 40% of the time is
consumed by sort-processing. Moving the sort-processing to the
compile time can speed up the kernel boot process.

performance test:
        env:    Intel(R) Xeon(R) CPU E5-2682 v4 @ 2.50GHz
        method: before and after patching, compare the
                total time of ftrace_init(), and verify
                the functionality of ftrace.

        avg_time of ftrace_init:
                with patch: 8.352 ms
                without patch: 15.763 ms

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
---
 kernel/trace/ftrace.c   |   5 ++-
 scripts/link-vmlinux.sh |   6 +--
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 109 +++++++++++++++++++++++++++++++++++++++++++++++-
 4 files changed, 115 insertions(+), 7 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7efbc8aaf7f6..c236da868990 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6189,8 +6189,9 @@ static int ftrace_process_locs(struct module *mod,
 	if (!count)
 		return 0;
 
-	sort(start, count, sizeof(*start),
-	     ftrace_cmp_ips, NULL);
+	if (mod)
+		sort(start, count, sizeof(*start),
+		     ftrace_cmp_ips, NULL);
 
 	start_pg = ftrace_allocate_pages(count);
 	if (!start_pg)
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index d74cee5c4326..57f53b0f4a8a 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -409,6 +409,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
 	${RESOLVE_BTFIDS} vmlinux
 fi
 
+info SYSMAP System.map
+mksysmap vmlinux System.map
+
 if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	info SORTTAB vmlinux
 	if ! sorttable vmlinux; then
@@ -417,9 +420,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	fi
 fi
 
-info SYSMAP System.map
-mksysmap vmlinux System.map
-
 # step a (see comment above)
 if [ -n "${CONFIG_KALLSYMS}" ]; then
 	mksysmap ${kallsyms_vmlinux} .tmp_System.map
diff --git a/scripts/sorttable.c b/scripts/sorttable.c
index 0ef3abfc4a51..11a595ca256b 100644
--- a/scripts/sorttable.c
+++ b/scripts/sorttable.c
@@ -30,6 +30,8 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
 
 #include <tools/be_byteshift.h>
 #include <tools/le_byteshift.h>
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2fefb13..db6c38c61986 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -19,6 +19,9 @@
 
 #undef extable_ent_size
 #undef compare_extable
+#undef get_mcount_loc
+#undef sort_mcount_loc
+#undef mcount_loc
 #undef do_sort
 #undef Elf_Addr
 #undef Elf_Ehdr
@@ -41,6 +44,9 @@
 #ifdef SORTTABLE_64
 # define extable_ent_size	16
 # define compare_extable	compare_extable_64
+# define get_mcount_loc    get_mcount_loc_64
+# define sort_mcount_loc    sort_mcount_loc_64
+# define mcount_loc     mcount_loc_64
 # define do_sort		do_sort_64
 # define Elf_Addr		Elf64_Addr
 # define Elf_Ehdr		Elf64_Ehdr
@@ -62,6 +68,9 @@
 #else
 # define extable_ent_size	8
 # define compare_extable	compare_extable_32
+# define get_mcount_loc    get_mcount_loc_32
+# define sort_mcount_loc    sort_mcount_loc_32
+# define mcount_loc     mcount_loc_32
 # define do_sort		do_sort_32
 # define Elf_Addr		Elf32_Addr
 # define Elf_Ehdr		Elf32_Ehdr
@@ -84,8 +93,6 @@
 
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 /* ORC unwinder only support X86_64 */
-#include <errno.h>
-#include <pthread.h>
 #include <asm/orc_types.h>
 
 #define ERRSTR_MAXSZ	256
@@ -191,6 +198,62 @@ static int compare_extable(const void *a, const void *b)
 		return 1;
 	return 0;
 }
+struct mcount_loc {
+	Elf_Ehdr *ehdr;
+	Elf_Shdr *init_data_sec;
+	uint_t start_mcount_loc;
+	uint_t stop_mcount_loc;
+};
+
+/* Sort the addresses stored between __start_mcount to __stop_mcount */
+static void *sort_mcount_loc(void *arg)
+{
+	struct mcount_loc *mstruct = (struct mcount_loc *)arg;
+	uint_t offset = mstruct->start_mcount_loc - _r(&(mstruct->init_data_sec)->sh_addr)
+					+ _r(&(mstruct->init_data_sec)->sh_offset);
+	uint_t count = mstruct->stop_mcount_loc - mstruct->start_mcount_loc;
+	unsigned char *start = (void *)mstruct->ehdr + offset;
+
+	qsort(start, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
+	return NULL;
+}
+
+/* get the address of __start_mcount_loc and __stop_mcount_loc*/
+static void get_mcount_loc(uint_t *_start, uint_t *_stop)
+{
+	FILE *file_start, *file_stop;
+	char start_buff[20];
+	char end_buff[20];
+	int len = 0;
+
+	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_start) {
+		fprintf(stderr, "get start_mcount_loc error!");
+		return;
+	}
+
+	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_stop) {
+		fprintf(stderr, "get stop_mcount_loc error!");
+		pclose(file_start);
+		return;
+	}
+
+	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
+		len = strlen(start_buff);
+		start_buff[len - 1] = '\0';
+	}
+	*_start = strtoul(start_buff, NULL, 16);
+
+	while (fgets(end_buff, sizeof(end_buff), file_stop) != NULL) {
+		len = strlen(end_buff);
+		end_buff[len - 1] = '\0';
+	}
+	*_stop = strtoul(end_buff, NULL, 16);
+
+	pclose(file_start);
+	pclose(file_stop);
+}
 
 static int do_sort(Elf_Ehdr *ehdr,
 		   char const *const fname,
@@ -217,6 +280,10 @@ static int do_sort(Elf_Ehdr *ehdr,
 	int idx;
 	unsigned int shnum;
 	unsigned int shstrndx;
+	struct mcount_loc mstruct;
+	uint_t _start_mcount_loc = 0;
+	uint_t _stop_mcount_loc = 0;
+	pthread_t mcount_sort_thread;
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 	unsigned int orc_ip_size = 0;
 	unsigned int orc_size = 0;
@@ -253,6 +320,14 @@ static int do_sort(Elf_Ehdr *ehdr,
 			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
 						      _r(&s->sh_offset));
 
+		/* locate the mcount_loc */
+		if (!strcmp(secstrings + idx, ".init.data")) {
+			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
+			mstruct.ehdr = ehdr;
+			mstruct.init_data_sec = s;
+			mstruct.start_mcount_loc = _start_mcount_loc;
+			mstruct.stop_mcount_loc = _stop_mcount_loc;
+		}
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 		/* locate the ORC unwind tables */
 		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
@@ -294,6 +369,21 @@ static int do_sort(Elf_Ehdr *ehdr,
 		goto out;
 	}
 #endif
+	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
+		fprintf(stderr,
+			"incomplete mcount_loc in file: %s\n",
+			fname);
+		goto out;
+	}
+
+	/* create thread to sort mcount_loc concurrently */
+	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
+		fprintf(stderr,
+			"pthread_create mcount_sort_thread failed '%s': %s\n",
+			strerror(errno), fname);
+		goto out;
+	}
+
 	if (!extab_sec) {
 		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
 		goto out;
@@ -376,5 +466,20 @@ static int do_sort(Elf_Ehdr *ehdr,
 		}
 	}
 #endif
+	if (mcount_sort_thread) {
+		void *retval = NULL;
+		/* wait for mcount sort done */
+		rc = pthread_join(mcount_sort_thread, &retval);
+		if (rc)
+			fprintf(stderr,
+				"pthread_join failed '%s': %s\n",
+				strerror(errno), fname);
+		else if (retval) {
+			rc = -1;
+			fprintf(stderr,
+				"failed to sort mcount '%s': %s\n",
+				(char *)retval, fname);
+		}
+	}
 	return rc;
 }
-- 
2.14.4.44.g2045bb6

Re: [PATCH 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Steven Rostedt]

On Sat, 11 Sep 2021 21:50:42 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

> When ftrace is enabled, ftrace_init will consume a period of
> time, usually around 15~20 ms. Approximately 40% of the time is
> consumed by sort-processing. Moving the sort-processing to the
> compile time can speed up the kernel boot process.
> 

Nice. I like the idea of sorting at compile time.

> performance test:
>         env:    Intel(R) Xeon(R) CPU E5-2682 v4 @ 2.50GHz
>         method: before and after patching, compare the
>                 total time of ftrace_init(), and verify
>                 the functionality of ftrace.
> 
>         avg_time of ftrace_init:
>                 with patch: 8.352 ms
>                 without patch: 15.763 ms
> 
> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> ---
>  kernel/trace/ftrace.c   |   5 ++-
>  scripts/link-vmlinux.sh |   6 +--
>  scripts/sorttable.c     |   2 +
>  scripts/sorttable.h     | 109 +++++++++++++++++++++++++++++++++++++++++++++++-
>  4 files changed, 115 insertions(+), 7 deletions(-)
> 
> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index 7efbc8aaf7f6..c236da868990 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -6189,8 +6189,9 @@ static int ftrace_process_locs(struct module *mod,
>  	if (!count)
>  		return 0;
>  
> -	sort(start, count, sizeof(*start),
> -	     ftrace_cmp_ips, NULL);
> +	if (mod)

Why can't we enforce modules to be sorted too?

> +		sort(start, count, sizeof(*start),
> +		     ftrace_cmp_ips, NULL);


-- Steve

Re: [PATCH 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

在 2021/9/11 下午9:59, Steven Rostedt 写道:
> On Sat, 11 Sep 2021 21:50:42 +0800
> Yinan Liu <yinan@linux.alibaba.com> wrote:
>
>> When ftrace is enabled, ftrace_init will consume a period of
>> time, usually around 15~20 ms. Approximately 40% of the time is
>> consumed by sort-processing. Moving the sort-processing to the
>> compile time can speed up the kernel boot process.
>>
> Nice. I like the idea of sorting at compile time.
Thanks !
>> performance test:
>>          env:    Intel(R) Xeon(R) CPU E5-2682 v4 @ 2.50GHz
>>          method: before and after patching, compare the
>>                  total time of ftrace_init(), and verify
>>                  the functionality of ftrace.
>>
>>          avg_time of ftrace_init:
>>                  with patch: 8.352 ms
>>                  without patch: 15.763 ms
>>
>> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
>> ---
>>   kernel/trace/ftrace.c   |   5 ++-
>>   scripts/link-vmlinux.sh |   6 +--
>>   scripts/sorttable.c     |   2 +
>>   scripts/sorttable.h     | 109 +++++++++++++++++++++++++++++++++++++++++++++++-
>>   4 files changed, 115 insertions(+), 7 deletions(-)
>>
>> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
>> index 7efbc8aaf7f6..c236da868990 100644
>> --- a/kernel/trace/ftrace.c
>> +++ b/kernel/trace/ftrace.c
>> @@ -6189,8 +6189,9 @@ static int ftrace_process_locs(struct module *mod,
>>   	if (!count)
>>   		return 0;
>>   
>> -	sort(start, count, sizeof(*start),
>> -	     ftrace_cmp_ips, NULL);
>> +	if (mod)
> Why can't we enforce modules to be sorted too?

hi，

Sorry for my slow progress . I have encountered some problems with the 
sorting
of the module's mcount in compile time. The .ko file will be relocated 
after insmod
or modprobe, most of the mcount relocation is based on .text section, 
but there are
also a small part of mcount relocation based on .init.text section such 
as module_init().
The loading position of .init.text and .text does not seem to be in a 
definite order.

For example, when I insmod ip_tables.ko twice, the front and back 
positions of init.text
and .text are different, so we cannot sort the mcounts in the two 
sections, which makes
the mcount sorting in the module meaningless.

What is your opinion on this?

>> +		sort(start, count, sizeof(*start),
>> +		     ftrace_cmp_ips, NULL);

> Best regards! 
> ---Yinan liu 

Re: [PATCH 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Steven Rostedt]

On Sun, 3 Oct 2021 21:42:10 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

> Sorry for my slow progress . I have encountered some problems with the 
> sorting
> of the module's mcount in compile time. The .ko file will be relocated 
> after insmod
> or modprobe, most of the mcount relocation is based on .text section, 
> but there are
> also a small part of mcount relocation based on .init.text section such 
> as module_init().
> The loading position of .init.text and .text does not seem to be in a 
> definite order.

Right, there's no guarantee that the .text portion of a module is
placed before or after the .init.text portion.

> 
> For example, when I insmod ip_tables.ko twice, the front and back 
> positions of init.text
> and .text are different, so we cannot sort the mcounts in the two 
> sections, which makes
> the mcount sorting in the module meaningless.
> 
> What is your opinion on this?

Probably just keep the sorting algorithm in the kernel and take place
on module load.

If you still want to sort at compile time, then do the sort for .init
functions separate from the .text ones, and have a way to extract this
information (shouldn't be too hard) in the kernel at module load, and
then just swap the init and text functions if they were added in the
reverse order that was expect.

The functions in .init will either be before all the functions in .text
or after. They wont be intermingled. Thus, if they are both sorted,
then they are placed correctly or the two groups of functions need to
be switched. No other sorting should be necessary.

-- Steve

Re: [PATCH 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

On 2021/10/9 上午7:48, Steven Rostedt wrote:
> On Sun, 3 Oct 2021 21:42:10 +0800
> Yinan Liu <yinan@linux.alibaba.com> wrote:
> 
>> Sorry for my slow progress . I have encountered some problems with the
>> sorting
>> of the module's mcount in compile time. The .ko file will be relocated
>> after insmod
>> or modprobe, most of the mcount relocation is based on .text section,
>> but there are
>> also a small part of mcount relocation based on .init.text section such
>> as module_init().
>> The loading position of .init.text and .text does not seem to be in a
>> definite order.
> 
> Right, there's no guarantee that the .text portion of a module is
> placed before or after the .init.text portion.
yes.
> 
>>
>> For example, when I insmod ip_tables.ko twice, the front and back
>> positions of init.text
>> and .text are different, so we cannot sort the mcounts in the two
>> sections, which makes
>> the mcount sorting in the module meaningless.
>>
>> What is your opinion on this?
> 
> Probably just keep the sorting algorithm in the kernel and take place
> on module load.
> 
> If you still want to sort at compile time, then do the sort for .init
> functions separate from the .text ones, and have a way to extract this
> information (shouldn't be too hard) in the kernel at module load, and
> then just swap the init and text functions if they were added in the
> reverse order that was expect.
> 
> The functions in .init will either be before all the functions in .text
> or after. They wont be intermingled. Thus, if they are both sorted,
> then they are placed correctly or the two groups of functions need to
> be switched. No other sorting should be necessary.
Thanks so much! I see. And I will have a try.
> 
> -- Steve
> 
Best regards!
-- Yinan liu

Re: [PATCH 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

On 2021/10/9 上午10:56, Yinan Liu wrote:

>> Probably just keep the sorting algorithm in the kernel and take place
>> on module load.
>>
>> If you still want to sort at compile time, then do the sort for .init
>> functions separate from the .text ones, and have a way to extract this
>> information (shouldn't be too hard) in the kernel at module load, and
>> then just swap the init and text functions if they were added in the
>> reverse order that was expect.
>>
>> The functions in .init will either be before all the functions in .text
>> or after. They wont be intermingled. Thus, if they are both sorted,
>> then they are placed correctly or the two groups of functions need to
>> be switched. No other sorting should be necessary.
>>

Hi, Steven

I try to apply for memory during the relocation phase to separate and 
adjust the mcount of .init.text and .text. After processing, I found 
that the mcount redirection in .ko is based on ".text", ".init.text", 
".ref.text", ".sched.text", ".spinlock.text", ".irqentry .text", 
".softirqentry.text", ".kprobes.text", ".cpuidle.text", 
".text.unlikely", which makes the sorting process at compile time 
cumbersome and inefficient. And .ko is inserted after the kernel start， 
to a certain extent, the optimization meaning of this part is relatively 
small. Now I think it makes more sense to optimize mcount during the 
startup period, because these mcounts based on different section 
redirects are relatively orderly
just like 11, 13, 15, 17, 19, 1, 3, 5, 7, 9, 21, 23, 25, 27, 29
.

At present, it seems that the processing of compile-time sorting is only 
suitable for vmlinux but not suitable for modules. Please review the 
code of mcount sorting in vmlinux, thank you.

> Best regards!
> -- Yinan liu

Re: [PATCH 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Steven Rostedt]

On Mon, 25 Oct 2021 21:20:47 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

> At present, it seems that the processing of compile-time sorting is only 
> suitable for vmlinux but not suitable for modules. Please review the 
> code of mcount sorting in vmlinux, thank you.

Agreed that only the vmlinux compile time sorting makes sense, and leave
the sorting of modules to the module load time.

I'll see if I can review your patches this week.

-- Steve

[PATCH 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Yinan Liu]

When ftrace is enabled, ftrace_init will consume a period of
time, usually around 15~20ms. Approximately 60% of the time is
consumed by nop-processing. Moving the nop-processing to the
compile time can speed up the kernel boot process.

performance test:
        env:    Intel(R) Xeon(R) CPU E5-2682 v4 @ 2.50GHz
        method: before and after patching, compare the
                total time of ftrace_init(), and verify
                the functionality of ftrace.

        avg_time of ftrace_init:
                with patch: 7.114ms
                without patch: 15.763ms

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
---
 kernel/trace/ftrace.c  |  4 ++++
 scripts/recordmcount.h | 14 ++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index c236da868990..ae3fba331179 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6261,6 +6261,10 @@ static int ftrace_process_locs(struct module *mod,
 	 * until we are finished with it, and there's no
 	 * reason to cause large interrupt latencies while we do it.
 	 */
+#if defined CONFIG_X86 || defined CONFIG_X86_64 || defined CONFIG_ARM || defined CONFIG_ARM64
+	ret = 0;
+	goto out;
+#endif
 	if (!mod)
 		local_irq_save(flags);
 	ftrace_update_code(mod, start_pg);
diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h
index 1e9baa5c4fc6..152311639a0b 100644
--- a/scripts/recordmcount.h
+++ b/scripts/recordmcount.h
@@ -406,6 +406,8 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 			       uint_t const recval,
 			       unsigned const reltype)
 {
+	Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff) + (void *)ehdr);
+	Elf_Shdr const *const shdr = &shdr0[w(relhdr->sh_info)];
 	uint_t *const mloc0 = mlocp;
 	Elf_Rel *mrelp = *mrelpp;
 	Elf_Sym const *sym0;
@@ -419,6 +421,7 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 	get_sym_str_and_relp(relhdr, ehdr, &sym0, &str0, &relp);
 
 	for (t = nrel; t; --t) {
+		int ret = -1;
 		if (!mcountsym)
 			mcountsym = get_mcountsym(sym0, relp, str0);
 
@@ -436,6 +439,17 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 				*mlocp++ = addend;
 
 			mrelp = (Elf_Rel *)(rel_entsize + (void *)mrelp);
+			/* convert mcount into nop */
+			if (make_nop)
+				ret = make_nop((void *)ehdr,
+						_w(shdr->sh_offset) + _w(relp->r_offset));
+			if (!ret) {
+				Elf_Rel rel;
+				rel = *(Elf_Rel *)relp;
+				Elf_r_info(&rel, Elf_r_sym(relp), rel_type_nop);
+				ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
+				uwrite(fd_map, &rel, sizeof(rel));
+			}
 		}
 		relp = (Elf_Rel const *)(rel_entsize + (void *)relp);
 	}
-- 
2.14.4.44.g2045bb6

Re: [PATCH 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Steven Rostedt]

On Sat, 11 Sep 2021 21:50:43 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

> When ftrace is enabled, ftrace_init will consume a period of
> time, usually around 15~20ms. Approximately 60% of the time is
> consumed by nop-processing. Moving the nop-processing to the
> compile time can speed up the kernel boot process.
> 
> performance test:
>         env:    Intel(R) Xeon(R) CPU E5-2682 v4 @ 2.50GHz
>         method: before and after patching, compare the
>                 total time of ftrace_init(), and verify
>                 the functionality of ftrace.
> 
>         avg_time of ftrace_init:
>                 with patch: 7.114ms
>                 without patch: 15.763ms

What compiler are you using? Because by default, gcc should already do
this for you. In fact, recordmcount isn't even called with the latest
gcc, as gcc creates mcount_loc and inserts nops.

This was implemented before, but because we use to have "ideal nops"
that was determined at run time, because the different CPUs had
different efficiency on what nop was used, we had to do it at run time.
But that is no longer the case today, so we can revisit this.

> 
> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> ---
>  kernel/trace/ftrace.c  |  4 ++++
>  scripts/recordmcount.h | 14 ++++++++++++++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index c236da868990..ae3fba331179 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -6261,6 +6261,10 @@ static int ftrace_process_locs(struct module *mod,
>  	 * until we are finished with it, and there's no
>  	 * reason to cause large interrupt latencies while we do it.
>  	 */
> +#if defined CONFIG_X86 || defined CONFIG_X86_64 || defined CONFIG_ARM || defined CONFIG_ARM64

We don't list archs in generic files. The above needs to be something like:

#ifdef ARCH_HAS_MCOUNT_NOP

or some name like that, and then that macro gets defined by the arch
header (include/asm/ftrace.h)



> +	ret = 0;
> +	goto out;
> +#endif

space should be here.

>  	if (!mod)
>  		local_irq_save(flags);
>  	ftrace_update_code(mod, start_pg);

-- Steve

Re: [PATCH 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Yinan Liu]

This is my GCC version: GCC version 4.8.5 20150623 (red hat 4.8.5-44) 
(GCC) .

In fact, I see the make_nop processing in recordmcount. I'm still 
confused why this part can be directly replaced?


在 2021/9/11 下午10:12, Steven Rostedt 写道:
> On Sat, 11 Sep 2021 21:50:43 +0800
> Yinan Liu <yinan@linux.alibaba.com> wrote:
>
>> When ftrace is enabled, ftrace_init will consume a period of
>> time, usually around 15~20ms. Approximately 60% of the time is
>> consumed by nop-processing. Moving the nop-processing to the
>> compile time can speed up the kernel boot process.
>>
>> performance test:
>>          env:    Intel(R) Xeon(R) CPU E5-2682 v4 @ 2.50GHz
>>          method: before and after patching, compare the
>>                  total time of ftrace_init(), and verify
>>                  the functionality of ftrace.
>>
>>          avg_time of ftrace_init:
>>                  with patch: 7.114ms
>>                  without patch: 15.763ms
> What compiler are you using? Because by default, gcc should already do
> this for you. In fact, recordmcount isn't even called with the latest
> gcc, as gcc creates mcount_loc and inserts nops.
>
> This was implemented before, but because we use to have "ideal nops"
> that was determined at run time, because the different CPUs had
> different efficiency on what nop was used, we had to do it at run time.
> But that is no longer the case today, so we can revisit this.
>
>> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
>> ---
>>   kernel/trace/ftrace.c  |  4 ++++
>>   scripts/recordmcount.h | 14 ++++++++++++++
>>   2 files changed, 18 insertions(+)
>>
>> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
>> index c236da868990..ae3fba331179 100644
>> --- a/kernel/trace/ftrace.c
>> +++ b/kernel/trace/ftrace.c
>> @@ -6261,6 +6261,10 @@ static int ftrace_process_locs(struct module *mod,
>>   	 * until we are finished with it, and there's no
>>   	 * reason to cause large interrupt latencies while we do it.
>>   	 */
>> +#if defined CONFIG_X86 || defined CONFIG_X86_64 || defined CONFIG_ARM || defined CONFIG_ARM64
> We don't list archs in generic files. The above needs to be something like:
>
> #ifdef ARCH_HAS_MCOUNT_NOP
>
> or some name like that, and then that macro gets defined by the arch
> header (include/asm/ftrace.h)
>
>
>
>> +	ret = 0;
>> +	goto out;
>> +#endif
> space should be here.
>
>>   	if (!mod)
>>   		local_irq_save(flags);
>>   	ftrace_update_code(mod, start_pg);
> -- Steve

Re: [PATCH 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Peter Zijlstra]

On Sat, Sep 11, 2021 at 11:28:32PM +0800, Yinan Liu wrote:
> This is my GCC version: GCC version 4.8.5 20150623 (red hat 4.8.5-44) (GCC)

Please don't top post. Also please upgrade your GCC, that's too told to
even build the current kernel tree (IIRC we have minimum GCC-5.1, but I
can recommend using GCC-8 or later).

Re: [PATCH 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Peter Zijlstra]

On Sat, Sep 11, 2021 at 09:50:43PM +0800, Yinan Liu wrote:
> When ftrace is enabled, ftrace_init will consume a period of
> time, usually around 15~20ms. Approximately 60% of the time is
> consumed by nop-processing. Moving the nop-processing to the
> compile time can speed up the kernel boot process.
> 
> performance test:
>         env:    Intel(R) Xeon(R) CPU E5-2682 v4 @ 2.50GHz

If you use objtool's -M argument instead of recordmcount, you already
get this and you can avoid running recordmcount entirely.

Re: [PATCH 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 12742 bytes --]

Hi Yinan,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on tip/perf/core]
[also build test ERROR on kbuild/for-next trace/for-next linus/master v5.14 next-20210910]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Yinan-Liu/ftrace-improve-ftrace-during-compiling/20210911-215230
base:   https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git 4034fb207e302cc0b1f304084d379640c1fb1436
config: sparc-allyesconfig (attached as .config)
compiler: sparc64-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/54d68f2f4f2f10bb9939f8f532615295bf52ce96
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Yinan-Liu/ftrace-improve-ftrace-during-compiling/20210911-215230
        git checkout 54d68f2f4f2f10bb9939f8f532615295bf52ce96
        # save the attached .config to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=sparc olddefconfig

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All error/warnings (new ones prefixed by >>):

   In file included from scripts/recordmcount.c:423:
   scripts/recordmcount.h: In function 'sift32_rel_mcount':
>> scripts/recordmcount.h:450:5: error: too many arguments to function 'ulseek'
     450 |     ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
         |     ^~~~~~
   scripts/recordmcount.c:81:14: note: declared here
      81 | static off_t ulseek(off_t const offset, int const whence)
         |              ^~~~~~
   In file included from scripts/recordmcount.c:423:
>> scripts/recordmcount.h:451:12: warning: passing argument 1 of 'uwrite' makes pointer from integer without a cast [-Wint-conversion]
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |            ^~~~~~
         |            |
         |            int
   scripts/recordmcount.c:101:41: note: expected 'const void * const' but argument is of type 'int'
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                       ~~~~~~~~~~~~~~~~~~^~~
   In file included from scripts/recordmcount.c:423:
>> scripts/recordmcount.h:451:20: warning: passing argument 2 of 'uwrite' makes integer from pointer without a cast [-Wint-conversion]
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |                    ^~~~
         |                    |
         |                    Elf32_Rel *
   scripts/recordmcount.c:101:59: note: expected 'size_t' {aka 'const long unsigned int'} but argument is of type 'Elf32_Rel *'
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                                              ~~~~~~~~~~~~~^~~~~
   In file included from scripts/recordmcount.c:423:
>> scripts/recordmcount.h:451:5: error: too many arguments to function 'uwrite'
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |     ^~~~~~
   scripts/recordmcount.c:101:16: note: declared here
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                ^~~~~~
   In file included from scripts/recordmcount.c:425:
   scripts/recordmcount.h: In function 'sift64_rel_mcount':
>> scripts/recordmcount.h:450:5: error: too many arguments to function 'ulseek'
     450 |     ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
         |     ^~~~~~
   scripts/recordmcount.c:81:14: note: declared here
      81 | static off_t ulseek(off_t const offset, int const whence)
         |              ^~~~~~
   In file included from scripts/recordmcount.c:425:
>> scripts/recordmcount.h:451:12: warning: passing argument 1 of 'uwrite' makes pointer from integer without a cast [-Wint-conversion]
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |            ^~~~~~
         |            |
         |            int
   scripts/recordmcount.c:101:41: note: expected 'const void * const' but argument is of type 'int'
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                       ~~~~~~~~~~~~~~~~~~^~~
   In file included from scripts/recordmcount.c:425:
>> scripts/recordmcount.h:451:20: warning: passing argument 2 of 'uwrite' makes integer from pointer without a cast [-Wint-conversion]
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |                    ^~~~
         |                    |
         |                    Elf64_Rel *
   scripts/recordmcount.c:101:59: note: expected 'size_t' {aka 'const long unsigned int'} but argument is of type 'Elf64_Rel *'
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                                              ~~~~~~~~~~~~~^~~~~
   In file included from scripts/recordmcount.c:425:
>> scripts/recordmcount.h:451:5: error: too many arguments to function 'uwrite'
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |     ^~~~~~
   scripts/recordmcount.c:101:16: note: declared here
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                ^~~~~~
   make[2]: *** [scripts/Makefile.host:95: scripts/recordmcount] Error 1
   make[2]: Target '__build' not remade because of errors.
   make[1]: *** [Makefile:1196: scripts] Error 2
   make[1]: Target 'modules_prepare' not remade because of errors.
   make: *** [Makefile:220: __sub-make] Error 2
   make: Target 'modules_prepare' not remade because of errors.
--
   In file included from scripts/recordmcount.c:423:
   scripts/recordmcount.h: In function 'sift32_rel_mcount':
>> scripts/recordmcount.h:450:5: error: too many arguments to function 'ulseek'
     450 |     ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
         |     ^~~~~~
   scripts/recordmcount.c:81:14: note: declared here
      81 | static off_t ulseek(off_t const offset, int const whence)
         |              ^~~~~~
   In file included from scripts/recordmcount.c:423:
>> scripts/recordmcount.h:451:12: warning: passing argument 1 of 'uwrite' makes pointer from integer without a cast [-Wint-conversion]
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |            ^~~~~~
         |            |
         |            int
   scripts/recordmcount.c:101:41: note: expected 'const void * const' but argument is of type 'int'
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                       ~~~~~~~~~~~~~~~~~~^~~
   In file included from scripts/recordmcount.c:423:
>> scripts/recordmcount.h:451:20: warning: passing argument 2 of 'uwrite' makes integer from pointer without a cast [-Wint-conversion]
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |                    ^~~~
         |                    |
         |                    Elf32_Rel *
   scripts/recordmcount.c:101:59: note: expected 'size_t' {aka 'const long unsigned int'} but argument is of type 'Elf32_Rel *'
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                                              ~~~~~~~~~~~~~^~~~~
   In file included from scripts/recordmcount.c:423:
>> scripts/recordmcount.h:451:5: error: too many arguments to function 'uwrite'
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |     ^~~~~~
   scripts/recordmcount.c:101:16: note: declared here
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                ^~~~~~
   In file included from scripts/recordmcount.c:425:
   scripts/recordmcount.h: In function 'sift64_rel_mcount':
>> scripts/recordmcount.h:450:5: error: too many arguments to function 'ulseek'
     450 |     ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
         |     ^~~~~~
   scripts/recordmcount.c:81:14: note: declared here
      81 | static off_t ulseek(off_t const offset, int const whence)
         |              ^~~~~~
   In file included from scripts/recordmcount.c:425:
>> scripts/recordmcount.h:451:12: warning: passing argument 1 of 'uwrite' makes pointer from integer without a cast [-Wint-conversion]
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |            ^~~~~~
         |            |
         |            int
   scripts/recordmcount.c:101:41: note: expected 'const void * const' but argument is of type 'int'
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                       ~~~~~~~~~~~~~~~~~~^~~
   In file included from scripts/recordmcount.c:425:
>> scripts/recordmcount.h:451:20: warning: passing argument 2 of 'uwrite' makes integer from pointer without a cast [-Wint-conversion]
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |                    ^~~~
         |                    |
         |                    Elf64_Rel *
   scripts/recordmcount.c:101:59: note: expected 'size_t' {aka 'const long unsigned int'} but argument is of type 'Elf64_Rel *'
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                                              ~~~~~~~~~~~~~^~~~~
   In file included from scripts/recordmcount.c:425:
>> scripts/recordmcount.h:451:5: error: too many arguments to function 'uwrite'
     451 |     uwrite(fd_map, &rel, sizeof(rel));
         |     ^~~~~~
   scripts/recordmcount.c:101:16: note: declared here
     101 | static ssize_t uwrite(void const *const buf, size_t const count)
         |                ^~~~~~
   make[2]: *** [scripts/Makefile.host:95: scripts/recordmcount] Error 1
   make[2]: Target '__build' not remade because of errors.
   make[1]: *** [Makefile:1196: scripts] Error 2
   make[1]: Target 'prepare' not remade because of errors.
   make: *** [Makefile:220: __sub-make] Error 2
   make: Target 'prepare' not remade because of errors.


vim +/ulseek +450 scripts/recordmcount.h

   394	
   395	/*
   396	 * Look at the relocations in order to find the calls to mcount.
   397	 * Accumulate the section offsets that are found, and their relocation info,
   398	 * onto the end of the existing arrays.
   399	 */
   400	static uint_t *sift_rel_mcount(uint_t *mlocp,
   401				       unsigned const offbase,
   402				       Elf_Rel **const mrelpp,
   403				       Elf_Shdr const *const relhdr,
   404				       Elf_Ehdr const *const ehdr,
   405				       unsigned const recsym,
   406				       uint_t const recval,
   407				       unsigned const reltype)
   408	{
   409		Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff) + (void *)ehdr);
   410		Elf_Shdr const *const shdr = &shdr0[w(relhdr->sh_info)];
   411		uint_t *const mloc0 = mlocp;
   412		Elf_Rel *mrelp = *mrelpp;
   413		Elf_Sym const *sym0;
   414		char const *str0;
   415		Elf_Rel const *relp;
   416		unsigned rel_entsize = _w(relhdr->sh_entsize);
   417		unsigned const nrel = _w(relhdr->sh_size) / rel_entsize;
   418		unsigned mcountsym = 0;
   419		unsigned t;
   420	
   421		get_sym_str_and_relp(relhdr, ehdr, &sym0, &str0, &relp);
   422	
   423		for (t = nrel; t; --t) {
   424			int ret = -1;
   425			if (!mcountsym)
   426				mcountsym = get_mcountsym(sym0, relp, str0);
   427	
   428			if (mcountsym && mcountsym == Elf_r_sym(relp) &&
   429					!is_fake_mcount(relp)) {
   430				uint_t const addend =
   431					_w(_w(relp->r_offset) - recval + mcount_adjust);
   432				mrelp->r_offset = _w(offbase
   433					+ ((void *)mlocp - (void *)mloc0));
   434				Elf_r_info(mrelp, recsym, reltype);
   435				if (rel_entsize == sizeof(Elf_Rela)) {
   436					((Elf_Rela *)mrelp)->r_addend = addend;
   437					*mlocp++ = 0;
   438				} else
   439					*mlocp++ = addend;
   440	
   441				mrelp = (Elf_Rel *)(rel_entsize + (void *)mrelp);
   442				/* convert mcount into nop */
   443				if (make_nop)
   444					ret = make_nop((void *)ehdr,
   445							_w(shdr->sh_offset) + _w(relp->r_offset));
   446				if (!ret) {
   447					Elf_Rel rel;
   448					rel = *(Elf_Rel *)relp;
   449					Elf_r_info(&rel, Elf_r_sym(relp), rel_type_nop);
 > 450					ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
 > 451					uwrite(fd_map, &rel, sizeof(rel));
   452				}
   453			}
   454			relp = (Elf_Rel const *)(rel_entsize + (void *)relp);
   455		}
   456		*mrelpp = mrelp;
   457		return mlocp;
   458	}
   459	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 69659 bytes --]

Re: [PATCH 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 19557 bytes --]

Hi Yinan,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on tip/perf/core]
[also build test ERROR on kbuild/for-next trace/for-next linus/master v5.14 next-20210910]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Yinan-Liu/ftrace-improve-ftrace-during-compiling/20210911-215230
base:   https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git 4034fb207e302cc0b1f304084d379640c1fb1436
config: powerpc-randconfig-r023-20210911 (attached as .config)
compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project 261cbe98c38f8c1ee1a482fe76511110e790f58a)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install powerpc cross compiling tool for clang build
        # apt-get install binutils-powerpc-linux-gnu
        # https://github.com/0day-ci/linux/commit/54d68f2f4f2f10bb9939f8f532615295bf52ce96
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Yinan-Liu/ftrace-improve-ftrace-during-compiling/20210911-215230
        git checkout 54d68f2f4f2f10bb9939f8f532615295bf52ce96
        # save the attached .config to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross O=build_dir ARCH=powerpc olddefconfig

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from scripts/sorttable.c:191:
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:2: note: remove the 'if' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: note: remove the '||' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: note: remove the '||' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:286:30: note: initialize the variable 'mcount_sort_thread' to silence this warning
           pthread_t mcount_sort_thread;
                                       ^
                                        = 0
   In file included from scripts/recordmcount.c:423:
>> scripts/recordmcount.h:450:49: error: too many arguments to function call, expected 2, have 3
                                   ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
                                   ~~~~~~                                      ^~~~~~~~
   /usr/include/stdio.h:109:18: note: expanded from macro 'SEEK_SET'
   #define SEEK_SET        0       /* Seek from beginning of file.  */
                           ^
   scripts/recordmcount.c:81:14: note: 'ulseek' declared here
   static off_t ulseek(off_t const offset, int const whence)
                ^
   In file included from scripts/sorttable.c:193:
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:2: note: remove the 'if' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: note: remove the '||' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: note: remove the '||' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:286:30: note: initialize the variable 'mcount_sort_thread' to silence this warning
           pthread_t mcount_sort_thread;
                                       ^
                                        = 0
   In file included from scripts/recordmcount.c:423:
   scripts/recordmcount.h:451:26: error: too many arguments to function call, expected 2, have 3
                                   uwrite(fd_map, &rel, sizeof(rel));
                                   ~~~~~~               ^~~~~~~~~~~
   scripts/recordmcount.c:101:16: note: 'uwrite' declared here
   static ssize_t uwrite(void const *const buf, size_t const count)
                  ^
   In file included from scripts/recordmcount.c:425:
>> scripts/recordmcount.h:450:49: error: too many arguments to function call, expected 2, have 3
                                   ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
                                   ~~~~~~                                      ^~~~~~~~
   /usr/include/stdio.h:109:18: note: expanded from macro 'SEEK_SET'
   #define SEEK_SET        0       /* Seek from beginning of file.  */
                           ^
   scripts/recordmcount.c:81:14: note: 'ulseek' declared here
   static off_t ulseek(off_t const offset, int const whence)
                ^
   In file included from scripts/recordmcount.c:425:
   scripts/recordmcount.h:451:26: error: too many arguments to function call, expected 2, have 3
                                   uwrite(fd_map, &rel, sizeof(rel));
                                   ~~~~~~               ^~~~~~~~~~~
   scripts/recordmcount.c:101:16: note: 'uwrite' declared here
   static ssize_t uwrite(void const *const buf, size_t const count)
                  ^
   4 errors generated.
   make[2]: *** [scripts/Makefile.host:95: scripts/recordmcount] Error 1
   6 warnings generated.
   /usr/bin/ld: /tmp/sorttable-29bd51.o: in function `main':
   sorttable.c:(.text+0x716): undefined reference to `pthread_create'
   /usr/bin/ld: sorttable.c:(.text+0xb2c): undefined reference to `pthread_create'
   /usr/bin/ld: sorttable.c:(.text+0xe90): undefined reference to `pthread_join'
   clang-14: error: linker command failed with exit code 1 (use -v to see invocation)
   make[2]: *** [scripts/Makefile.host:95: scripts/sorttable] Error 1
   make[2]: Target '__build' not remade because of errors.
   make[1]: *** [Makefile:1196: scripts] Error 2
   make[1]: Target 'modules_prepare' not remade because of errors.
   make: *** [Makefile:220: __sub-make] Error 2
   make: Target 'modules_prepare' not remade because of errors.
--
   scripts/genksyms/parse.y: warning: 9 shift/reduce conflicts [-Wconflicts-sr]
   scripts/genksyms/parse.y: warning: 5 reduce/reduce conflicts [-Wconflicts-rr]
   In file included from scripts/sorttable.c:191:
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:2: note: remove the 'if' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: note: remove the '||' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: note: remove the '||' if its condition is always false
   In file included from scripts/recordmcount.c:423:
>> scripts/recordmcount.h:450:49: error: too many arguments to function call, expected 2, have 3
                                   ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
                                   ~~~~~~                                      ^~~~~~~~
   /usr/include/stdio.h:109:18: note: expanded from macro 'SEEK_SET'
   #define SEEK_SET        0       /* Seek from beginning of file.  */
                           ^
   scripts/recordmcount.c:81:14: note: 'ulseek' declared here
   static off_t ulseek(off_t const offset, int const whence)
                ^
   In file included from scripts/recordmcount.c:423:
   scripts/recordmcount.h:451:26: error: too many arguments to function call, expected 2, have 3
                                   uwrite(fd_map, &rel, sizeof(rel));
                                   ~~~~~~               ^~~~~~~~~~~
   scripts/recordmcount.c:101:16: note: 'uwrite' declared here
   static ssize_t uwrite(void const *const buf, size_t const count)
                  ^
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:286:30: note: initialize the variable 'mcount_sort_thread' to silence this warning
           pthread_t mcount_sort_thread;
                                       ^
                                        = 0
   In file included from scripts/sorttable.c:193:
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:2: note: remove the 'if' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: note: remove the '||' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: warning: variable 'mcount_sort_thread' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:469:6: note: uninitialized use occurs here
           if (mcount_sort_thread) {
               ^~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:372:6: note: remove the '||' if its condition is always false
           if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
               ^~~~~~~~~~~~~~~~~~~~~~~~~
   scripts/sorttable.h:286:30: note: initialize the variable 'mcount_sort_thread' to silence this warning
           pthread_t mcount_sort_thread;
                                       ^
                                        = 0
   In file included from scripts/recordmcount.c:425:
>> scripts/recordmcount.h:450:49: error: too many arguments to function call, expected 2, have 3
                                   ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
                                   ~~~~~~                                      ^~~~~~~~
   /usr/include/stdio.h:109:18: note: expanded from macro 'SEEK_SET'
   #define SEEK_SET        0       /* Seek from beginning of file.  */
                           ^
   scripts/recordmcount.c:81:14: note: 'ulseek' declared here
   static off_t ulseek(off_t const offset, int const whence)
                ^
   In file included from scripts/recordmcount.c:425:
   scripts/recordmcount.h:451:26: error: too many arguments to function call, expected 2, have 3
                                   uwrite(fd_map, &rel, sizeof(rel));
                                   ~~~~~~               ^~~~~~~~~~~
   scripts/recordmcount.c:101:16: note: 'uwrite' declared here
   static ssize_t uwrite(void const *const buf, size_t const count)
                  ^
   4 errors generated.
   make[2]: *** [scripts/Makefile.host:95: scripts/recordmcount] Error 1
   6 warnings generated.
   /usr/bin/ld: /tmp/sorttable-df0121.o: in function `main':
   sorttable.c:(.text+0x716): undefined reference to `pthread_create'
   /usr/bin/ld: sorttable.c:(.text+0xb2c): undefined reference to `pthread_create'
   /usr/bin/ld: sorttable.c:(.text+0xe90): undefined reference to `pthread_join'
   clang-14: error: linker command failed with exit code 1 (use -v to see invocation)
   make[2]: *** [scripts/Makefile.host:95: scripts/sorttable] Error 1
   make[2]: Target '__build' not remade because of errors.
   make[1]: *** [Makefile:1196: scripts] Error 2
   make[1]: Target 'prepare' not remade because of errors.
   make: *** [Makefile:220: __sub-make] Error 2
   make: Target 'prepare' not remade because of errors.


vim +450 scripts/recordmcount.h

   394	
   395	/*
   396	 * Look at the relocations in order to find the calls to mcount.
   397	 * Accumulate the section offsets that are found, and their relocation info,
   398	 * onto the end of the existing arrays.
   399	 */
   400	static uint_t *sift_rel_mcount(uint_t *mlocp,
   401				       unsigned const offbase,
   402				       Elf_Rel **const mrelpp,
   403				       Elf_Shdr const *const relhdr,
   404				       Elf_Ehdr const *const ehdr,
   405				       unsigned const recsym,
   406				       uint_t const recval,
   407				       unsigned const reltype)
   408	{
   409		Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff) + (void *)ehdr);
   410		Elf_Shdr const *const shdr = &shdr0[w(relhdr->sh_info)];
   411		uint_t *const mloc0 = mlocp;
   412		Elf_Rel *mrelp = *mrelpp;
   413		Elf_Sym const *sym0;
   414		char const *str0;
   415		Elf_Rel const *relp;
   416		unsigned rel_entsize = _w(relhdr->sh_entsize);
   417		unsigned const nrel = _w(relhdr->sh_size) / rel_entsize;
   418		unsigned mcountsym = 0;
   419		unsigned t;
   420	
   421		get_sym_str_and_relp(relhdr, ehdr, &sym0, &str0, &relp);
   422	
   423		for (t = nrel; t; --t) {
   424			int ret = -1;
   425			if (!mcountsym)
   426				mcountsym = get_mcountsym(sym0, relp, str0);
   427	
   428			if (mcountsym && mcountsym == Elf_r_sym(relp) &&
   429					!is_fake_mcount(relp)) {
   430				uint_t const addend =
   431					_w(_w(relp->r_offset) - recval + mcount_adjust);
   432				mrelp->r_offset = _w(offbase
   433					+ ((void *)mlocp - (void *)mloc0));
   434				Elf_r_info(mrelp, recsym, reltype);
   435				if (rel_entsize == sizeof(Elf_Rela)) {
   436					((Elf_Rela *)mrelp)->r_addend = addend;
   437					*mlocp++ = 0;
   438				} else
   439					*mlocp++ = addend;
   440	
   441				mrelp = (Elf_Rel *)(rel_entsize + (void *)mrelp);
   442				/* convert mcount into nop */
   443				if (make_nop)
   444					ret = make_nop((void *)ehdr,
   445							_w(shdr->sh_offset) + _w(relp->r_offset));
   446				if (!ret) {
   447					Elf_Rel rel;
   448					rel = *(Elf_Rel *)relp;
   449					Elf_r_info(&rel, Elf_r_sym(relp), rel_type_nop);
 > 450					ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
   451					uwrite(fd_map, &rel, sizeof(rel));
   452				}
   453			}
   454			relp = (Elf_Rel const *)(rel_entsize + (void *)relp);
   455		}
   456		*mrelpp = mrelp;
   457		return mlocp;
   458	}
   459	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 32764 bytes --]

[PATCH v2 0/2] ftrace optimization at compile time

[Yinan Liu]

Hi,Steven
  
This is my V2 patch. If you haven't reviewed patch V1 yet,
just review this one. Thank you.

Yinan Liu (2):
  scripts: ftrace - move the sort-processing in ftrace_init to compile
    time
  scripts: ftrace - move the nop-processing in ftrace_init to compile
    time

 kernel/trace/ftrace.c   |  12 +++++-
 scripts/link-vmlinux.sh |   6 +--
 scripts/recordmcount.h  |  14 +++++++
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 109 +++++++++++++++++++++++++++++++++++++++++++++++-
 5 files changed, 136 insertions(+), 7 deletions(-)

-- 
2.14.4.44.g2045bb6

[PATCH v2 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

When the kernel starts, the initialization of fTrace takes
up a portion of the time (approximately 6~8ms) to sort mcount
addresses. We can save this time by moving mcount-sorting to
compile time.

After communication with Patch V1, it is concluded that it is
more meaningful to sort mcount addresses in vmlinux during
compilation, which is not suitable for kernel module at present.
Patch V2 has adjusted some variable names and comments.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
---
 kernel/trace/ftrace.c   |   5 ++-
 scripts/link-vmlinux.sh |   6 +--
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 109 +++++++++++++++++++++++++++++++++++++++++++++++-
 4 files changed, 115 insertions(+), 7 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 30bc880c3849..c776a2956237 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6406,8 +6406,9 @@ static int ftrace_process_locs(struct module *mod,
 	if (!count)
 		return 0;
 
-	sort(start, count, sizeof(*start),
-	     ftrace_cmp_ips, NULL);
+	if (mod)
+		sort(start, count, sizeof(*start),
+		     ftrace_cmp_ips, NULL);
 
 	start_pg = ftrace_allocate_pages(count);
 	if (!start_pg)
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 5cdd9bc5c385..dd9955f45774 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -400,6 +400,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
 	${RESOLVE_BTFIDS} vmlinux
 fi
 
+info SYSMAP System.map
+mksysmap vmlinux System.map
+
 if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	info SORTTAB vmlinux
 	if ! sorttable vmlinux; then
@@ -408,9 +411,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	fi
 fi
 
-info SYSMAP System.map
-mksysmap vmlinux System.map
-
 # step a (see comment above)
 if [ -n "${CONFIG_KALLSYMS}" ]; then
 	mksysmap ${kallsyms_vmlinux} .tmp_System.map
diff --git a/scripts/sorttable.c b/scripts/sorttable.c
index b7c2ad71f9cf..70bdc787ddfb 100644
--- a/scripts/sorttable.c
+++ b/scripts/sorttable.c
@@ -30,6 +30,8 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
 
 #include <tools/be_byteshift.h>
 #include <tools/le_byteshift.h>
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2fefb13..0743fb58812d 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -19,6 +19,9 @@
 
 #undef extable_ent_size
 #undef compare_extable
+#undef get_mcount_loc
+#undef sort_mcount_loc
+#undef elf_mcount_loc
 #undef do_sort
 #undef Elf_Addr
 #undef Elf_Ehdr
@@ -41,6 +44,9 @@
 #ifdef SORTTABLE_64
 # define extable_ent_size	16
 # define compare_extable	compare_extable_64
+# define get_mcount_loc    get_mcount_loc_64
+# define sort_mcount_loc    sort_mcount_loc_64
+# define elf_mcount_loc     elf_mcount_loc_64
 # define do_sort		do_sort_64
 # define Elf_Addr		Elf64_Addr
 # define Elf_Ehdr		Elf64_Ehdr
@@ -62,6 +68,9 @@
 #else
 # define extable_ent_size	8
 # define compare_extable	compare_extable_32
+# define get_mcount_loc    get_mcount_loc_32
+# define sort_mcount_loc    sort_mcount_loc_32
+# define elf_mcount_loc     elf_mcount_loc_32
 # define do_sort		do_sort_32
 # define Elf_Addr		Elf32_Addr
 # define Elf_Ehdr		Elf32_Ehdr
@@ -84,8 +93,6 @@
 
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 /* ORC unwinder only support X86_64 */
-#include <errno.h>
-#include <pthread.h>
 #include <asm/orc_types.h>
 
 #define ERRSTR_MAXSZ	256
@@ -191,6 +198,62 @@ static int compare_extable(const void *a, const void *b)
 		return 1;
 	return 0;
 }
+struct elf_mcount_loc {
+	Elf_Ehdr *ehdr;
+	Elf_Shdr *init_data_sec;
+	uint_t start_mcount_loc;
+	uint_t stop_mcount_loc;
+};
+
+/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
+static void *sort_mcount_loc(void *arg)
+{
+	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
+	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
+					+ _r(&(emloc->init_data_sec)->sh_offset);
+	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
+	unsigned char *start_loc = (void *)emloc->ehdr + offset;
+
+	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
+	return NULL;
+}
+
+/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
+static void get_mcount_loc(uint_t *_start, uint_t *_stop)
+{
+	FILE *file_start, *file_stop;
+	char start_buff[20];
+	char stop_buff[20];
+	int len = 0;
+
+	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_start) {
+		fprintf(stderr, "get start_mcount_loc error!");
+		return;
+	}
+
+	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_stop) {
+		fprintf(stderr, "get stop_mcount_loc error!");
+		pclose(file_start);
+		return;
+	}
+
+	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
+		len = strlen(start_buff);
+		start_buff[len - 1] = '\0';
+	}
+	*_start = strtoul(start_buff, NULL, 16);
+
+	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
+		len = strlen(stop_buff);
+		stop_buff[len - 1] = '\0';
+	}
+	*_stop = strtoul(stop_buff, NULL, 16);
+
+	pclose(file_start);
+	pclose(file_stop);
+}
 
 static int do_sort(Elf_Ehdr *ehdr,
 		   char const *const fname,
@@ -217,6 +280,10 @@ static int do_sort(Elf_Ehdr *ehdr,
 	int idx;
 	unsigned int shnum;
 	unsigned int shstrndx;
+	struct elf_mcount_loc mstruct;
+	uint_t _start_mcount_loc = 0;
+	uint_t _stop_mcount_loc = 0;
+	pthread_t mcount_sort_thread;
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 	unsigned int orc_ip_size = 0;
 	unsigned int orc_size = 0;
@@ -253,6 +320,14 @@ static int do_sort(Elf_Ehdr *ehdr,
 			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
 						      _r(&s->sh_offset));
 
+		/* locate the .init.data section in vmlinux */
+		if (!strcmp(secstrings + idx, ".init.data")) {
+			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
+			mstruct.ehdr = ehdr;
+			mstruct.init_data_sec = s;
+			mstruct.start_mcount_loc = _start_mcount_loc;
+			mstruct.stop_mcount_loc = _stop_mcount_loc;
+		}
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 		/* locate the ORC unwind tables */
 		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
@@ -294,6 +369,21 @@ static int do_sort(Elf_Ehdr *ehdr,
 		goto out;
 	}
 #endif
+	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
+		fprintf(stderr,
+			"incomplete mcount's sort in file: %s\n",
+			fname);
+		goto out;
+	}
+
+	/* create thread to sort mcount_loc concurrently */
+	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
+		fprintf(stderr,
+			"pthread_create mcount_sort_thread failed '%s': %s\n",
+			strerror(errno), fname);
+		goto out;
+	}
+
 	if (!extab_sec) {
 		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
 		goto out;
@@ -376,5 +466,20 @@ static int do_sort(Elf_Ehdr *ehdr,
 		}
 	}
 #endif
+	if (mcount_sort_thread) {
+		void *retval = NULL;
+		/* wait for mcount sort done */
+		rc = pthread_join(mcount_sort_thread, &retval);
+		if (rc)
+			fprintf(stderr,
+				"pthread_join failed '%s': %s\n",
+				strerror(errno), fname);
+		else if (retval) {
+			rc = -1;
+			fprintf(stderr,
+				"failed to sort mcount '%s': %s\n",
+				(char *)retval, fname);
+		}
+	}
 	return rc;
 }
-- 
2.14.4.44.g2045bb6

Re: [PATCH v2 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Peter Zijlstra]

On Tue, Nov 16, 2021 at 10:49:41AM +0800, Yinan Liu wrote:

> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index 30bc880c3849..c776a2956237 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -6406,8 +6406,9 @@ static int ftrace_process_locs(struct module *mod,
>  	if (!count)
>  		return 0;
>  
> -	sort(start, count, sizeof(*start),
> -	     ftrace_cmp_ips, NULL);
> +	if (mod)
> +		sort(start, count, sizeof(*start),
> +		     ftrace_cmp_ips, NULL);
>  

/me hands a bucket of {} your way. Also, can't sorttable be ran on
modules ?

> @@ -376,5 +466,20 @@ static int do_sort(Elf_Ehdr *ehdr,
>  		}
>  	}
>  #endif
> +	if (mcount_sort_thread) {
> +		void *retval = NULL;
> +		/* wait for mcount sort done */
> +		rc = pthread_join(mcount_sort_thread, &retval);
> +		if (rc)
> +			fprintf(stderr,
> +				"pthread_join failed '%s': %s\n",
> +				strerror(errno), fname);

Use some here too :-)

> +		else if (retval) {
> +			rc = -1;
> +			fprintf(stderr,
> +				"failed to sort mcount '%s': %s\n",
> +				(char *)retval, fname);
> +		}
> +	}
>  	return rc;
>  }

Re: [PATCH v2 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

在 2021/11/16 下午4:07, Peter Zijlstra 写道:

> /me hands a bucket of {} your way. 

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6406,8 +6406,10 @@ static int ftrace_process_locs(struct module *mod,
         if (!count)
                 return 0;

-       sort(start, count, sizeof(*start),
-            ftrace_cmp_ips, NULL);
+       if (mod) {
+               sort(start, count, sizeof(*start),
+                    ftrace_cmp_ips, NULL);
+       }

hi，peter

you mean like this? I hope I'm not mistaken.


 > Also, can't sorttable be ran on modules ?

The .ko file will be relocated after insmod or modprobe.
And the mcount redirection in .ko is based on ".text",
".init.text", ".ref.text", ".sched.text", ".spinlock.text",
".irqentry .text", ".softirqentry.text", ".kprobes.text", 
".cpuidle.text", ".text.unlikely". These sections‘ loading
position are not in definite order.

So sorting this part at compile time doesn't make much sense.




Best regards!
--Yinan liu

Re: [PATCH v2 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Peter Zijlstra]

On Tue, Nov 16, 2021 at 08:42:28PM +0800, Yinan Liu wrote:
> 
> 
> 在 2021/11/16 下午4:07, Peter Zijlstra 写道:
> 
> > /me hands a bucket of {} your way.
> 
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -6406,8 +6406,10 @@ static int ftrace_process_locs(struct module *mod,
>         if (!count)
>                 return 0;
> 
> -       sort(start, count, sizeof(*start),
> -            ftrace_cmp_ips, NULL);
> +       if (mod) {
> +               sort(start, count, sizeof(*start),
> +                    ftrace_cmp_ips, NULL);
> +       }
> 
> hi，peter
> 
> you mean like this? I hope I'm not mistaken.

Exactly.

> 
> > Also, can't sorttable be ran on modules ?
> 
> The .ko file will be relocated after insmod or modprobe.
> And the mcount redirection in .ko is based on ".text",
> ".init.text", ".ref.text", ".sched.text", ".spinlock.text",
> ".irqentry .text", ".softirqentry.text", ".kprobes.text", ".cpuidle.text",
> ".text.unlikely". These sections‘ loading
> position are not in definite order.
> 
> So sorting this part at compile time doesn't make much sense.

Bah.. I thought the sections would retain relative position at least,
but alas. if that isn't done you're quite right that sorting seems
pointless.

Re: [PATCH v2 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

>>> Also, can't sorttable be ran on modules ?
>>
>> The .ko file will be relocated after insmod or modprobe.
>> And the mcount redirection in .ko is based on ".text",
>> ".init.text", ".ref.text", ".sched.text", ".spinlock.text",
>> ".irqentry .text", ".softirqentry.text", ".kprobes.text", ".cpuidle.text",
>> ".text.unlikely". These sections‘ loading
>> position are not in definite order.
>>
>> So sorting this part at compile time doesn't make much sense.
> 
> Bah.. I thought the sections would retain relative position at least,
> but alas. if that isn't done you're quite right that sorting seems
> pointless.
> 

I found the problem when I was sorting mcount in .ko.
Initially I found that some mcount's relocation base on.text
and some base on .init.text.I tried insmod the same .ko several
times. The results show that there is no definite order between
the two sections，and the same situation occurs in several other
mcount base sections.





Best regards!
--Yinan liu

Re: [PATCH v2 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2181 bytes --]

Hi Yinan,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on rostedt-trace/for-next]
[also build test ERROR on linux/master linus/master v5.16-rc1 next-20211117]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Yinan-Liu/scripts-ftrace-move-the-sort-processing-in-ftrace_init-to-compile-time/20211116-114954
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace.git for-next
config: i386-debian-10.3 (attached as .config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
reproduce (this is a W=1 build):
        # https://github.com/0day-ci/linux/commit/fe96b08ca13186c5821d3fabf66f4a209be20507
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Yinan-Liu/scripts-ftrace-move-the-sort-processing-in-ftrace_init-to-compile-time/20211116-114954
        git checkout fe96b08ca13186c5821d3fabf66f4a209be20507
        # save the attached .config to linux build tree
        mkdir build_dir
        make W=1 O=build_dir ARCH=i386 prepare

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   /usr/bin/ld: /tmp/ccTdfIIm.o: in function `main':
>> sorttable.c:(.text.startup+0xabb): undefined reference to `pthread_create'
>> /usr/bin/ld: sorttable.c:(.text.startup+0xc5a): undefined reference to `pthread_join'
>> /usr/bin/ld: sorttable.c:(.text.startup+0xe34): undefined reference to `pthread_create'
>> collect2: error: ld returned 1 exit status
   make[2]: *** [scripts/Makefile.host:95: scripts/sorttable] Error 1
   make[2]: Target '__build' not remade because of errors.
   make[1]: *** [Makefile:1203: scripts] Error 2
   make[1]: Target 'prepare' not remade because of errors.
   make: *** [Makefile:219: __sub-make] Error 2
   make: Target 'prepare' not remade because of errors.

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 34127 bytes --]

[PATCH v2 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Yinan Liu]

In some business scenarios, GCC versions are so old that
optimizations in ftrace cannot be completed, such as
-mrecord-mcount and -mnop-mcount. The recordmCount in the
kernel is actually used. In this case, ftrace_init will
consume a period of time, usually around 9~12ms. Do nop
substitution in recordmcount.c to speed up ftrace_init.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
---
 kernel/trace/ftrace.c  |  7 +++++++
 scripts/recordmcount.h | 14 ++++++++++++++
 2 files changed, 21 insertions(+)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index c776a2956237..ccc690e81556 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6478,6 +6478,13 @@ static int ftrace_process_locs(struct module *mod,
 	 * until we are finished with it, and there's no
 	 * reason to cause large interrupt latencies while we do it.
 	 */
+#ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
+#ifdef CONFIG_HAVE_C_RECORDMCOUNT
+	ret = 0;
+	goto out;
+#endif
+#endif
+
 	if (!mod)
 		local_irq_save(flags);
 	ftrace_update_code(mod, start_pg);
diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h
index 1e9baa5c4fc6..152311639a0b 100644
--- a/scripts/recordmcount.h
+++ b/scripts/recordmcount.h
@@ -406,6 +406,8 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 			       uint_t const recval,
 			       unsigned const reltype)
 {
+	Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff) + (void *)ehdr);
+	Elf_Shdr const *const shdr = &shdr0[w(relhdr->sh_info)];
 	uint_t *const mloc0 = mlocp;
 	Elf_Rel *mrelp = *mrelpp;
 	Elf_Sym const *sym0;
@@ -419,6 +421,7 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 	get_sym_str_and_relp(relhdr, ehdr, &sym0, &str0, &relp);
 
 	for (t = nrel; t; --t) {
+		int ret = -1;
 		if (!mcountsym)
 			mcountsym = get_mcountsym(sym0, relp, str0);
 
@@ -436,6 +439,17 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 				*mlocp++ = addend;
 
 			mrelp = (Elf_Rel *)(rel_entsize + (void *)mrelp);
+			/* convert mcount into nop */
+			if (make_nop)
+				ret = make_nop((void *)ehdr,
+						_w(shdr->sh_offset) + _w(relp->r_offset));
+			if (!ret) {
+				Elf_Rel rel;
+				rel = *(Elf_Rel *)relp;
+				Elf_r_info(&rel, Elf_r_sym(relp), rel_type_nop);
+				ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
+				uwrite(fd_map, &rel, sizeof(rel));
+			}
 		}
 		relp = (Elf_Rel const *)(rel_entsize + (void *)relp);
 	}
-- 
2.14.4.44.g2045bb6

Re: [PATCH v2 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Peter Zijlstra]

On Tue, Nov 16, 2021 at 10:49:42AM +0800, Yinan Liu wrote:
> In some business scenarios, GCC versions are so old that
> optimizations in ftrace cannot be completed, such as
> -mrecord-mcount and -mnop-mcount. The recordmCount in the
> kernel is actually used. In this case, ftrace_init will
> consume a period of time, usually around 9~12ms. Do nop
> substitution in recordmcount.c to speed up ftrace_init.

I really don't buy this.. if you can build a fresh kernel, you can
install a fresh gcc too -- and if you care about performance that's a
very good idea anyway.

Re: [PATCH v2 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Yinan Liu]

在 2021/11/16 下午4:10, Peter Zijlstra 写道:
> On Tue, Nov 16, 2021 at 10:49:42AM +0800, Yinan Liu wrote:
>> In some business scenarios, GCC versions are so old that
>> optimizations in ftrace cannot be completed, such as
>> -mrecord-mcount and -mnop-mcount. The recordmCount in the
>> kernel is actually used. In this case, ftrace_init will
>> consume a period of time, usually around 9~12ms. Do nop
>> substitution in recordmcount.c to speed up ftrace_init.
> 
> I really don't buy this.. if you can build a fresh kernel, you can
> install a fresh gcc too -- and if you care about performance that's a
> very good idea anyway.
> 
Thanks! You are right. We should get rid of the burden.

Re: [PATCH v2 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Steven Rostedt]

On Tue, 16 Nov 2021 09:10:20 +0100
Peter Zijlstra <peterz@infradead.org> wrote:

> On Tue, Nov 16, 2021 at 10:49:42AM +0800, Yinan Liu wrote:
> > In some business scenarios, GCC versions are so old that
> > optimizations in ftrace cannot be completed, such as
> > -mrecord-mcount and -mnop-mcount. The recordmCount in the
> > kernel is actually used. In this case, ftrace_init will
> > consume a period of time, usually around 9~12ms. Do nop
> > substitution in recordmcount.c to speed up ftrace_init.  
> 
> I really don't buy this.. if you can build a fresh kernel, you can
> install a fresh gcc too -- and if you care about performance that's a
> very good idea anyway.
> 

I'm not sure this is true for all archs, is it? That is, is the nop
substitution available in all archs that support mcount updates. Some
(most) archs are special, because they have to deal with link registers and
such.

And because of that, I'm not sure the patch works for all those archs.

-- Steve

Re: [PATCH v2 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Yinan Liu]

在 2021/11/16 下午9:07, Steven Rostedt 写道:
> On Tue, 16 Nov 2021 09:10:20 +0100
> Peter Zijlstra <peterz@infradead.org> wrote:
> 
>> On Tue, Nov 16, 2021 at 10:49:42AM +0800, Yinan Liu wrote:
>>> In some business scenarios, GCC versions are so old that
>>> optimizations in ftrace cannot be completed, such as
>>> -mrecord-mcount and -mnop-mcount. The recordmCount in the
>>> kernel is actually used. In this case, ftrace_init will
>>> consume a period of time, usually around 9~12ms. Do nop
>>> substitution in recordmcount.c to speed up ftrace_init.
>>
>> I really don't buy this.. if you can build a fresh kernel, you can
>> install a fresh gcc too -- and if you care about performance that's a
>> very good idea anyway.
>>
> 
> I'm not sure this is true for all archs, is it? That is, is the nop
> substitution available in all archs that support mcount updates. Some
> (most) archs are special, because they have to deal with link registers and
> such.
> 
> And because of that, I'm not sure the patch works for all those archs.
> 
> -- Steve
> 

At present, I have only verified it under x86. In other cases, I am 
short of arch or scenarios. I am not sure whether the patch is 
applicable to all the architectures, perhaps adding something to x86?
Do you think it makes sense?

In fact, many companies cannot upgrade GCC due to online business 
reasons. This patch will help.




Best regards!
--Yinan liu

Re: [PATCH v2 2/2] scripts: ftrace - move the nop-processing in ftrace_init to compile time

[Steven Rostedt]

On Tue, 16 Nov 2021 10:49:42 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

> In some business scenarios, GCC versions are so old that
> optimizations in ftrace cannot be completed, such as
> -mrecord-mcount and -mnop-mcount. The recordmCount in the
> kernel is actually used. In this case, ftrace_init will
> consume a period of time, usually around 9~12ms. Do nop
> substitution in recordmcount.c to speed up ftrace_init.
> 
> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> ---
>  kernel/trace/ftrace.c  |  7 +++++++
>  scripts/recordmcount.h | 14 ++++++++++++++
>  2 files changed, 21 insertions(+)
> 
> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index c776a2956237..ccc690e81556 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -6478,6 +6478,13 @@ static int ftrace_process_locs(struct module *mod,
>  	 * until we are finished with it, and there's no
>  	 * reason to cause large interrupt latencies while we do it.
>  	 */
> +#ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
> +#ifdef CONFIG_HAVE_C_RECORDMCOUNT

So the above alone does not guarantee that the callers are converted into
nops. So this is wrong.

There's already logic to convert to nops. But that's done in the
architecture code, not in the generic code.

> +	ret = 0;
> +	goto out;
> +#endif
> +#endif
> +
>  	if (!mod)
>  		local_irq_save(flags);
>  	ftrace_update_code(mod, start_pg);
> diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h
> index 1e9baa5c4fc6..152311639a0b 100644
> --- a/scripts/recordmcount.h
> +++ b/scripts/recordmcount.h
> @@ -406,6 +406,8 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
>  			       uint_t const recval,
>  			       unsigned const reltype)
>  {
> +	Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff) + (void *)ehdr);
> +	Elf_Shdr const *const shdr = &shdr0[w(relhdr->sh_info)];
>  	uint_t *const mloc0 = mlocp;
>  	Elf_Rel *mrelp = *mrelpp;
>  	Elf_Sym const *sym0;
> @@ -419,6 +421,7 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
>  	get_sym_str_and_relp(relhdr, ehdr, &sym0, &str0, &relp);
>  
>  	for (t = nrel; t; --t) {
> +		int ret = -1;
>  		if (!mcountsym)
>  			mcountsym = get_mcountsym(sym0, relp, str0);
>  
> @@ -436,6 +439,17 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
>  				*mlocp++ = addend;
>  
>  			mrelp = (Elf_Rel *)(rel_entsize + (void *)mrelp);
> +			/* convert mcount into nop */
> +			if (make_nop)

Here you even have an if statement that only converts to nops if it is
already done.

-- Steve


> +				ret = make_nop((void *)ehdr,
> +						_w(shdr->sh_offset) + _w(relp->r_offset));
> +			if (!ret) {
> +				Elf_Rel rel;
> +				rel = *(Elf_Rel *)relp;
> +				Elf_r_info(&rel, Elf_r_sym(relp), rel_type_nop);
> +				ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
> +				uwrite(fd_map, &rel, sizeof(rel));
> +			}
>  		}
>  		relp = (Elf_Rel const *)(rel_entsize + (void *)relp);
>  	}

[PATCH v3] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

Hi,

patch V3 has fixed the issue reported-by robot and adjusted
the formatting problem again.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
---
 kernel/trace/ftrace.c   |   6 ++-
 scripts/Makefile        |   2 +-
 scripts/link-vmlinux.sh |   6 +--
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 113 ++++++++++++++++++++++++++++++++++++++++++++++--
 5 files changed, 119 insertions(+), 10 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7b180f6..f5af419 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6189,8 +6189,10 @@ static int ftrace_process_locs(struct module *mod,
 	if (!count)
 		return 0;
 
-	sort(start, count, sizeof(*start),
-	     ftrace_cmp_ips, NULL);
+	if (mod) {
+		sort(start, count, sizeof(*start),
+		     ftrace_cmp_ips, NULL);
+	}
 
 	start_pg = ftrace_allocate_pages(count);
 	if (!start_pg)
diff --git a/scripts/Makefile b/scripts/Makefile
index 9adb6d2..b286e11 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -17,6 +17,7 @@ hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
 hostprogs-always-$(CONFIG_SYSTEM_REVOCATION_LIST)	+= extract-cert
 
 HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
+HOSTLDLIBS_sorttable = -lpthread
 HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
 HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
 HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
@@ -29,7 +30,6 @@ ARCH := x86
 endif
 HOSTCFLAGS_sorttable.o += -I$(srctree)/tools/arch/x86/include
 HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
-HOSTLDLIBS_sorttable = -lpthread
 endif
 
 # The following programs are only built on demand
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 36ef7b3..e2e1a8f 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -422,6 +422,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
 	${RESOLVE_BTFIDS} vmlinux
 fi
 
+info SYSMAP System.map
+mksysmap vmlinux System.map
+
 if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	info SORTTAB vmlinux
 	if ! sorttable vmlinux; then
@@ -430,9 +433,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	fi
 fi
 
-info SYSMAP System.map
-mksysmap vmlinux System.map
-
 # step a (see comment above)
 if [ -n "${CONFIG_KALLSYMS}" ]; then
 	mksysmap ${kallsyms_vmlinux} .tmp_System.map
diff --git a/scripts/sorttable.c b/scripts/sorttable.c
index 0ef3abf..11a595c 100644
--- a/scripts/sorttable.c
+++ b/scripts/sorttable.c
@@ -30,6 +30,8 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
 
 #include <tools/be_byteshift.h>
 #include <tools/le_byteshift.h>
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2f..1effc08 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -19,6 +19,9 @@
 
 #undef extable_ent_size
 #undef compare_extable
+#undef get_mcount_loc
+#undef sort_mcount_loc
+#undef elf_mcount_loc
 #undef do_sort
 #undef Elf_Addr
 #undef Elf_Ehdr
@@ -41,6 +44,9 @@
 #ifdef SORTTABLE_64
 # define extable_ent_size	16
 # define compare_extable	compare_extable_64
+# define get_mcount_loc	get_mcount_loc_64
+# define sort_mcount_loc	sort_mcount_loc_64
+# define elf_mcount_loc	elf_mcount_loc_64
 # define do_sort		do_sort_64
 # define Elf_Addr		Elf64_Addr
 # define Elf_Ehdr		Elf64_Ehdr
@@ -62,6 +68,9 @@
 #else
 # define extable_ent_size	8
 # define compare_extable	compare_extable_32
+# define get_mcount_loc	get_mcount_loc_32
+# define sort_mcount_loc	sort_mcount_loc_32
+# define elf_mcount_loc	elf_mcount_loc_32
 # define do_sort		do_sort_32
 # define Elf_Addr		Elf32_Addr
 # define Elf_Ehdr		Elf32_Ehdr
@@ -84,8 +93,6 @@
 
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 /* ORC unwinder only support X86_64 */
-#include <errno.h>
-#include <pthread.h>
 #include <asm/orc_types.h>
 
 #define ERRSTR_MAXSZ	256
@@ -191,6 +198,62 @@ static int compare_extable(const void *a, const void *b)
 		return 1;
 	return 0;
 }
+struct elf_mcount_loc {
+	Elf_Ehdr *ehdr;
+	Elf_Shdr *init_data_sec;
+	uint_t start_mcount_loc;
+	uint_t stop_mcount_loc;
+};
+
+/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
+static void *sort_mcount_loc(void *arg)
+{
+	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
+	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
+					+ _r(&(emloc->init_data_sec)->sh_offset);
+	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
+	unsigned char *start_loc = (void *)emloc->ehdr + offset;
+
+	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
+	return NULL;
+}
+
+/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
+static void get_mcount_loc(uint_t *_start, uint_t *_stop)
+{
+	FILE *file_start, *file_stop;
+	char start_buff[20];
+	char stop_buff[20];
+	int len = 0;
+
+	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_start) {
+		fprintf(stderr, "get start_mcount_loc error!");
+		return;
+	}
+
+	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_stop) {
+		fprintf(stderr, "get stop_mcount_loc error!");
+		pclose(file_start);
+		return;
+	}
+
+	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
+		len = strlen(start_buff);
+		start_buff[len - 1] = '\0';
+	}
+	*_start = strtoul(start_buff, NULL, 16);
+
+	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
+		len = strlen(stop_buff);
+		stop_buff[len - 1] = '\0';
+	}
+	*_stop = strtoul(stop_buff, NULL, 16);
+
+	pclose(file_start);
+	pclose(file_stop);
+}
 
 static int do_sort(Elf_Ehdr *ehdr,
 		   char const *const fname,
@@ -217,6 +280,10 @@ static int do_sort(Elf_Ehdr *ehdr,
 	int idx;
 	unsigned int shnum;
 	unsigned int shstrndx;
+	struct elf_mcount_loc mstruct;
+	uint_t _start_mcount_loc = 0;
+	uint_t _stop_mcount_loc = 0;
+	pthread_t mcount_sort_thread;
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 	unsigned int orc_ip_size = 0;
 	unsigned int orc_size = 0;
@@ -253,6 +320,14 @@ static int do_sort(Elf_Ehdr *ehdr,
 			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
 						      _r(&s->sh_offset));
 
+		/* locate the .init.data section in vmlinux */
+		if (!strcmp(secstrings + idx, ".init.data")) {
+			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
+			mstruct.ehdr = ehdr;
+			mstruct.init_data_sec = s;
+			mstruct.start_mcount_loc = _start_mcount_loc;
+			mstruct.stop_mcount_loc = _stop_mcount_loc;
+		}
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 		/* locate the ORC unwind tables */
 		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
@@ -294,6 +369,21 @@ static int do_sort(Elf_Ehdr *ehdr,
 		goto out;
 	}
 #endif
+	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
+		fprintf(stderr,
+			"incomplete mcount's sort in file: %s\n",
+			fname);
+		goto out;
+	}
+
+	/* create thread to sort mcount_loc concurrently */
+	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
+		fprintf(stderr,
+			"pthread_create mcount_sort_thread failed '%s': %s\n",
+			strerror(errno), fname);
+		goto out;
+	}
+
 	if (!extab_sec) {
 		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
 		goto out;
@@ -364,11 +454,11 @@ static int do_sort(Elf_Ehdr *ehdr,
 		void *retval = NULL;
 		/* wait for ORC tables sort done */
 		rc = pthread_join(orc_sort_thread, &retval);
-		if (rc)
+		if (rc) {
 			fprintf(stderr,
 				"pthread_join failed '%s': %s\n",
 				strerror(errno), fname);
-		else if (retval) {
+		} else if (retval) {
 			rc = -1;
 			fprintf(stderr,
 				"failed to sort ORC tables '%s': %s\n",
@@ -376,5 +466,20 @@ static int do_sort(Elf_Ehdr *ehdr,
 		}
 	}
 #endif
+	if (mcount_sort_thread) {
+		void *retval = NULL;
+		/* wait for mcount sort done */
+		rc = pthread_join(mcount_sort_thread, &retval);
+		if (rc) {
+			fprintf(stderr,
+				"pthread_join failed '%s': %s\n",
+				strerror(errno), fname);
+		} else if (retval) {
+			rc = -1;
+			fprintf(stderr,
+				"failed to sort mcount '%s': %s\n",
+				(char *)retval, fname);
+		}
+	}
 	return rc;
 }
-- 
1.8.3.1

[PATCH v4] ftrace sorting optimization changelog

[Yinan Liu]

Hi,

I found a code alignment problem in patch v3 and 
modified it in patch v4. You can look directly at 
patch v4, cover-letter introduces the changes 
starting from patch v2.

v2 link:https://lore.kernel.org/all/20211116024942.60644-2-yinan@linux.alibaba.com/

v2--->v3(alignment problem)--->v4

Modified the code style issue of if() {} raised by Peter.

Fix the compilation error by changing the position of 
the relevant compilation options of pthread, which is 
reported by the robot.

The two tabs show differences in vim and git diff. 
In patch v3, the display in the patch is directly 
adjusted, resulting in misalignment of the format 
in the code. 
In patch v4, the alignment in the code is maintained, 
but the display in the patch looks very awkward, but 
this is just the display problem.Both are two tabs. 

Best regards!
-- Yinan Liu 

Yinan Liu (1):
  scripts: ftrace - move the sort-processing in ftrace_init to compile
    time

 kernel/trace/ftrace.c   |   6 ++-
 scripts/Makefile        |   2 +-
 scripts/link-vmlinux.sh |   6 +--
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 113 ++++++++++++++++++++++++++++++++++++++++++++++--
 5 files changed, 119 insertions(+), 10 deletions(-)

-- 
1.8.3.1

[PATCH v4] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

When the kernel starts, the initialization of ftrace takes
up a portion of the time (approximately 6~8ms) to sort mcount
addresses. We can save this time by moving mcount-sorting to
compile time.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
---
 kernel/trace/ftrace.c   |   6 ++-
 scripts/Makefile        |   2 +-
 scripts/link-vmlinux.sh |   6 +--
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 113 ++++++++++++++++++++++++++++++++++++++++++++++--
 5 files changed, 119 insertions(+), 10 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7b180f6..f5af419 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6189,8 +6189,10 @@ static int ftrace_process_locs(struct module *mod,
 	if (!count)
 		return 0;
 
-	sort(start, count, sizeof(*start),
-	     ftrace_cmp_ips, NULL);
+	if (mod) {
+		sort(start, count, sizeof(*start),
+		     ftrace_cmp_ips, NULL);
+	}
 
 	start_pg = ftrace_allocate_pages(count);
 	if (!start_pg)
diff --git a/scripts/Makefile b/scripts/Makefile
index 9adb6d2..b286e11 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -17,6 +17,7 @@ hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
 hostprogs-always-$(CONFIG_SYSTEM_REVOCATION_LIST)	+= extract-cert
 
 HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
+HOSTLDLIBS_sorttable = -lpthread
 HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
 HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
 HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
@@ -29,7 +30,6 @@ ARCH := x86
 endif
 HOSTCFLAGS_sorttable.o += -I$(srctree)/tools/arch/x86/include
 HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
-HOSTLDLIBS_sorttable = -lpthread
 endif
 
 # The following programs are only built on demand
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 36ef7b3..e2e1a8f 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -422,6 +422,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
 	${RESOLVE_BTFIDS} vmlinux
 fi
 
+info SYSMAP System.map
+mksysmap vmlinux System.map
+
 if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	info SORTTAB vmlinux
 	if ! sorttable vmlinux; then
@@ -430,9 +433,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	fi
 fi
 
-info SYSMAP System.map
-mksysmap vmlinux System.map
-
 # step a (see comment above)
 if [ -n "${CONFIG_KALLSYMS}" ]; then
 	mksysmap ${kallsyms_vmlinux} .tmp_System.map
diff --git a/scripts/sorttable.c b/scripts/sorttable.c
index 0ef3abf..11a595c 100644
--- a/scripts/sorttable.c
+++ b/scripts/sorttable.c
@@ -30,6 +30,8 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
 
 #include <tools/be_byteshift.h>
 #include <tools/le_byteshift.h>
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2f..81dbf37 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -19,6 +19,9 @@
 
 #undef extable_ent_size
 #undef compare_extable
+#undef get_mcount_loc
+#undef sort_mcount_loc
+#undef elf_mcount_loc
 #undef do_sort
 #undef Elf_Addr
 #undef Elf_Ehdr
@@ -41,6 +44,9 @@
 #ifdef SORTTABLE_64
 # define extable_ent_size	16
 # define compare_extable	compare_extable_64
+# define get_mcount_loc		get_mcount_loc_64
+# define sort_mcount_loc	sort_mcount_loc_64
+# define elf_mcount_loc		elf_mcount_loc_64
 # define do_sort		do_sort_64
 # define Elf_Addr		Elf64_Addr
 # define Elf_Ehdr		Elf64_Ehdr
@@ -62,6 +68,9 @@
 #else
 # define extable_ent_size	8
 # define compare_extable	compare_extable_32
+# define get_mcount_loc		get_mcount_loc_32
+# define sort_mcount_loc	sort_mcount_loc_32
+# define elf_mcount_loc		elf_mcount_loc_32
 # define do_sort		do_sort_32
 # define Elf_Addr		Elf32_Addr
 # define Elf_Ehdr		Elf32_Ehdr
@@ -84,8 +93,6 @@
 
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 /* ORC unwinder only support X86_64 */
-#include <errno.h>
-#include <pthread.h>
 #include <asm/orc_types.h>
 
 #define ERRSTR_MAXSZ	256
@@ -191,6 +198,62 @@ static int compare_extable(const void *a, const void *b)
 		return 1;
 	return 0;
 }
+struct elf_mcount_loc {
+	Elf_Ehdr *ehdr;
+	Elf_Shdr *init_data_sec;
+	uint_t start_mcount_loc;
+	uint_t stop_mcount_loc;
+};
+
+/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
+static void *sort_mcount_loc(void *arg)
+{
+	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
+	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
+					+ _r(&(emloc->init_data_sec)->sh_offset);
+	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
+	unsigned char *start_loc = (void *)emloc->ehdr + offset;
+
+	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
+	return NULL;
+}
+
+/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
+static void get_mcount_loc(uint_t *_start, uint_t *_stop)
+{
+	FILE *file_start, *file_stop;
+	char start_buff[20];
+	char stop_buff[20];
+	int len = 0;
+
+	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_start) {
+		fprintf(stderr, "get start_mcount_loc error!");
+		return;
+	}
+
+	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_stop) {
+		fprintf(stderr, "get stop_mcount_loc error!");
+		pclose(file_start);
+		return;
+	}
+
+	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
+		len = strlen(start_buff);
+		start_buff[len - 1] = '\0';
+	}
+	*_start = strtoul(start_buff, NULL, 16);
+
+	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
+		len = strlen(stop_buff);
+		stop_buff[len - 1] = '\0';
+	}
+	*_stop = strtoul(stop_buff, NULL, 16);
+
+	pclose(file_start);
+	pclose(file_stop);
+}
 
 static int do_sort(Elf_Ehdr *ehdr,
 		   char const *const fname,
@@ -217,6 +280,10 @@ static int do_sort(Elf_Ehdr *ehdr,
 	int idx;
 	unsigned int shnum;
 	unsigned int shstrndx;
+	struct elf_mcount_loc mstruct;
+	uint_t _start_mcount_loc = 0;
+	uint_t _stop_mcount_loc = 0;
+	pthread_t mcount_sort_thread;
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 	unsigned int orc_ip_size = 0;
 	unsigned int orc_size = 0;
@@ -253,6 +320,14 @@ static int do_sort(Elf_Ehdr *ehdr,
 			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
 						      _r(&s->sh_offset));
 
+		/* locate the .init.data section in vmlinux */
+		if (!strcmp(secstrings + idx, ".init.data")) {
+			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
+			mstruct.ehdr = ehdr;
+			mstruct.init_data_sec = s;
+			mstruct.start_mcount_loc = _start_mcount_loc;
+			mstruct.stop_mcount_loc = _stop_mcount_loc;
+		}
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 		/* locate the ORC unwind tables */
 		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
@@ -294,6 +369,21 @@ static int do_sort(Elf_Ehdr *ehdr,
 		goto out;
 	}
 #endif
+	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
+		fprintf(stderr,
+			"incomplete mcount's sort in file: %s\n",
+			fname);
+		goto out;
+	}
+
+	/* create thread to sort mcount_loc concurrently */
+	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
+		fprintf(stderr,
+			"pthread_create mcount_sort_thread failed '%s': %s\n",
+			strerror(errno), fname);
+		goto out;
+	}
+
 	if (!extab_sec) {
 		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
 		goto out;
@@ -364,11 +454,11 @@ static int do_sort(Elf_Ehdr *ehdr,
 		void *retval = NULL;
 		/* wait for ORC tables sort done */
 		rc = pthread_join(orc_sort_thread, &retval);
-		if (rc)
+		if (rc) {
 			fprintf(stderr,
 				"pthread_join failed '%s': %s\n",
 				strerror(errno), fname);
-		else if (retval) {
+		} else if (retval) {
 			rc = -1;
 			fprintf(stderr,
 				"failed to sort ORC tables '%s': %s\n",
@@ -376,5 +466,20 @@ static int do_sort(Elf_Ehdr *ehdr,
 		}
 	}
 #endif
+	if (mcount_sort_thread) {
+		void *retval = NULL;
+		/* wait for mcount sort done */
+		rc = pthread_join(mcount_sort_thread, &retval);
+		if (rc) {
+			fprintf(stderr,
+				"pthread_join failed '%s': %s\n",
+				strerror(errno), fname);
+		} else if (retval) {
+			rc = -1;
+			fprintf(stderr,
+				"failed to sort mcount '%s': %s\n",
+				(char *)retval, fname);
+		}
+	}
 	return rc;
 }
-- 
1.8.3.1

Re: [PATCH v4] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

在 2021/11/23 下午6:54, Yinan Liu 写道:
> When the kernel starts, the initialization of ftrace takes
> up a portion of the time (approximately 6~8ms) to sort mcount
> addresses. We can save this time by moving mcount-sorting to
> compile time.
> 
> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> Reported-by: kernel test robot <lkp@intel.com>

Hi,

Is there anything wrong with this patch? Or are you too busy
to review? Let me make sure that it has not been forgotten.


Best regards!
-- Yinan Liu

Re: [PATCH v4] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Steven Rostedt]

On Mon, 29 Nov 2021 10:13:23 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

> Is there anything wrong with this patch? Or are you too busy
> to review? Let me make sure that it has not been forgotten.

FYI, last week had a major US holiday, and things get a bit busy,
before hand.

I haven't had time to look at it, but will try to this week or next.

Cheers,

-- Steve

Re: [PATCH v4] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

在 2021/11/29 上午11:51, Steven Rostedt 写道:
> On Mon, 29 Nov 2021 10:13:23 +0800
> Yinan Liu <yinan@linux.alibaba.com> wrote:
> 
>> Is there anything wrong with this patch? Or are you too busy
>> to review? Let me make sure that it has not been forgotten.
> 
> FYI, last week had a major US holiday, and things get a bit busy,
> before hand.
>
> I haven't had time to look at it, but will try to this week or next.
> 

Get it. THX!

cheers～

-- Yinan Liu

Re: [PATCH v4] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Steven Rostedt]

On Tue, 23 Nov 2021 18:54:04 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

> When the kernel starts, the initialization of ftrace takes
> up a portion of the time (approximately 6~8ms) to sort mcount
> addresses. We can save this time by moving mcount-sorting to
> compile time.
> 

Hmm, this depends on CONFIG_BUILDTIME_TABLE_SORT, and not every
architecture that defines CONFIG_HAVE_DYNAMIC_FTRACE also defines
CONFIG_BUILDTIME_TABLE_SORT. So this will break those architectures.

> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> Reported-by: kernel test robot <lkp@intel.com>
> ---
>  kernel/trace/ftrace.c   |   6 ++-
>  scripts/Makefile        |   2 +-
>  scripts/link-vmlinux.sh |   6 +--
>  scripts/sorttable.c     |   2 +
>  scripts/sorttable.h     | 113 ++++++++++++++++++++++++++++++++++++++++++++++--
>  5 files changed, 119 insertions(+), 10 deletions(-)
> 
> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index 7b180f6..f5af419 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -6189,8 +6189,10 @@ static int ftrace_process_locs(struct module *mod,
>  	if (!count)
>  		return 0;
>  
> -	sort(start, count, sizeof(*start),
> -	     ftrace_cmp_ips, NULL);

Should have a comment:

	/* Modules can not be sorted at build time */
> +	if (mod) {

And perhaps even add:

	if (!IS_ENABLED(CONFIG_BUILDTIME_TABLE_SORT) || mod) {

> +		sort(start, count, sizeof(*start),
> +		     ftrace_cmp_ips, NULL);
> +	}
>  
>  	start_pg = ftrace_allocate_pages(count);
>  	if (!start_pg)
> diff --git a/scripts/Makefile b/scripts/Makefile
> index 9adb6d2..b286e11 100644
> --- a/scripts/Makefile
> +++ b/scripts/Makefile
> @@ -17,6 +17,7 @@ hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
>  hostprogs-always-$(CONFIG_SYSTEM_REVOCATION_LIST)	+= extract-cert
>  
>  HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
> +HOSTLDLIBS_sorttable = -lpthread
>  HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
>  HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
>  HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
> @@ -29,7 +30,6 @@ ARCH := x86
>  endif
>  HOSTCFLAGS_sorttable.o += -I$(srctree)/tools/arch/x86/include
>  HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
> -HOSTLDLIBS_sorttable = -lpthread
>  endif
>  
>  # The following programs are only built on demand
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index 36ef7b3..e2e1a8f 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -422,6 +422,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
>  	${RESOLVE_BTFIDS} vmlinux
>  fi
>  
> +info SYSMAP System.map
> +mksysmap vmlinux System.map
> +
>  if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
>  	info SORTTAB vmlinux
>  	if ! sorttable vmlinux; then
> @@ -430,9 +433,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
>  	fi
>  fi
>  
> -info SYSMAP System.map
> -mksysmap vmlinux System.map
> -
>  # step a (see comment above)
>  if [ -n "${CONFIG_KALLSYMS}" ]; then
>  	mksysmap ${kallsyms_vmlinux} .tmp_System.map
> diff --git a/scripts/sorttable.c b/scripts/sorttable.c
> index 0ef3abf..11a595c 100644
> --- a/scripts/sorttable.c
> +++ b/scripts/sorttable.c
> @@ -30,6 +30,8 @@
>  #include <stdlib.h>
>  #include <string.h>
>  #include <unistd.h>
> +#include <errno.h>
> +#include <pthread.h>
>  
>  #include <tools/be_byteshift.h>
>  #include <tools/le_byteshift.h>
> diff --git a/scripts/sorttable.h b/scripts/sorttable.h
> index a2baa2f..81dbf37 100644
> --- a/scripts/sorttable.h
> +++ b/scripts/sorttable.h
> @@ -19,6 +19,9 @@
>  
>  #undef extable_ent_size
>  #undef compare_extable
> +#undef get_mcount_loc
> +#undef sort_mcount_loc
> +#undef elf_mcount_loc
>  #undef do_sort
>  #undef Elf_Addr
>  #undef Elf_Ehdr
> @@ -41,6 +44,9 @@
>  #ifdef SORTTABLE_64
>  # define extable_ent_size	16
>  # define compare_extable	compare_extable_64
> +# define get_mcount_loc		get_mcount_loc_64
> +# define sort_mcount_loc	sort_mcount_loc_64
> +# define elf_mcount_loc		elf_mcount_loc_64
>  # define do_sort		do_sort_64
>  # define Elf_Addr		Elf64_Addr
>  # define Elf_Ehdr		Elf64_Ehdr
> @@ -62,6 +68,9 @@
>  #else
>  # define extable_ent_size	8
>  # define compare_extable	compare_extable_32
> +# define get_mcount_loc		get_mcount_loc_32
> +# define sort_mcount_loc	sort_mcount_loc_32
> +# define elf_mcount_loc		elf_mcount_loc_32
>  # define do_sort		do_sort_32
>  # define Elf_Addr		Elf32_Addr
>  # define Elf_Ehdr		Elf32_Ehdr
> @@ -84,8 +93,6 @@
>  
>  #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
>  /* ORC unwinder only support X86_64 */
> -#include <errno.h>
> -#include <pthread.h>
>  #include <asm/orc_types.h>
>  
>  #define ERRSTR_MAXSZ	256
> @@ -191,6 +198,62 @@ static int compare_extable(const void *a, const void *b)
>  		return 1;
>  	return 0;
>  }
> +struct elf_mcount_loc {
> +	Elf_Ehdr *ehdr;
> +	Elf_Shdr *init_data_sec;
> +	uint_t start_mcount_loc;
> +	uint_t stop_mcount_loc;
> +};
> +
> +/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
> +static void *sort_mcount_loc(void *arg)
> +{
> +	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
> +	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
> +					+ _r(&(emloc->init_data_sec)->sh_offset);
> +	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
> +	unsigned char *start_loc = (void *)emloc->ehdr + offset;
> +
> +	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
> +	return NULL;
> +}
> +
> +/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
> +static void get_mcount_loc(uint_t *_start, uint_t *_stop)
> +{
> +	FILE *file_start, *file_stop;
> +	char start_buff[20];
> +	char stop_buff[20];
> +	int len = 0;
> +
> +	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
> +	if (!file_start) {
> +		fprintf(stderr, "get start_mcount_loc error!");
> +		return;
> +	}
> +
> +	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
> +	if (!file_stop) {
> +		fprintf(stderr, "get stop_mcount_loc error!");
> +		pclose(file_start);
> +		return;
> +	}
> +
> +	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
> +		len = strlen(start_buff);
> +		start_buff[len - 1] = '\0';
> +	}
> +	*_start = strtoul(start_buff, NULL, 16);
> +
> +	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
> +		len = strlen(stop_buff);
> +		stop_buff[len - 1] = '\0';
> +	}
> +	*_stop = strtoul(stop_buff, NULL, 16);
> +
> +	pclose(file_start);
> +	pclose(file_stop);
> +}
>  
>  static int do_sort(Elf_Ehdr *ehdr,
>  		   char const *const fname,
> @@ -217,6 +280,10 @@ static int do_sort(Elf_Ehdr *ehdr,
>  	int idx;
>  	unsigned int shnum;
>  	unsigned int shstrndx;
> +	struct elf_mcount_loc mstruct;
> +	uint_t _start_mcount_loc = 0;
> +	uint_t _stop_mcount_loc = 0;
> +	pthread_t mcount_sort_thread;
>  #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
>  	unsigned int orc_ip_size = 0;
>  	unsigned int orc_size = 0;
> @@ -253,6 +320,14 @@ static int do_sort(Elf_Ehdr *ehdr,
>  			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
>  						      _r(&s->sh_offset));
>  
> +		/* locate the .init.data section in vmlinux */
> +		if (!strcmp(secstrings + idx, ".init.data")) {
> +			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
> +			mstruct.ehdr = ehdr;
> +			mstruct.init_data_sec = s;
> +			mstruct.start_mcount_loc = _start_mcount_loc;
> +			mstruct.stop_mcount_loc = _stop_mcount_loc;
> +		}
>  #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
>  		/* locate the ORC unwind tables */
>  		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
> @@ -294,6 +369,21 @@ static int do_sort(Elf_Ehdr *ehdr,
>  		goto out;
>  	}
>  #endif
> +	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {

This is triggered when CONFIG_FUNCTION_TRACER is not defined.

In other words, do not fail if mcount section does not exist.


> +		fprintf(stderr,
> +			"incomplete mcount's sort in file: %s\n",
> +			fname);
> +		goto out;
> +	}
> +
> +	/* create thread to sort mcount_loc concurrently */
> +	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
> +		fprintf(stderr,
> +			"pthread_create mcount_sort_thread failed '%s': %s\n",
> +			strerror(errno), fname);
> +		goto out;
> +	}
> +
>  	if (!extab_sec) {
>  		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
>  		goto out;
> @@ -364,11 +454,11 @@ static int do_sort(Elf_Ehdr *ehdr,
>  		void *retval = NULL;
>  		/* wait for ORC tables sort done */
>  		rc = pthread_join(orc_sort_thread, &retval);
> -		if (rc)
> +		if (rc) {
>  			fprintf(stderr,
>  				"pthread_join failed '%s': %s\n",
>  				strerror(errno), fname);
> -		else if (retval) {
> +		} else if (retval) {
>  			rc = -1;
>  			fprintf(stderr,
>  				"failed to sort ORC tables '%s': %s\n",

Looks like you added parenthesis that was not yours. I would ignore this
for your patch, but feel free to send a separate clean up patch.

> @@ -376,5 +466,20 @@ static int do_sort(Elf_Ehdr *ehdr,
>  		}
>  	}
>  #endif
> +	if (mcount_sort_thread) {
> +		void *retval = NULL;
> +		/* wait for mcount sort done */
> +		rc = pthread_join(mcount_sort_thread, &retval);
> +		if (rc) {
> +			fprintf(stderr,
> +				"pthread_join failed '%s': %s\n",
> +				strerror(errno), fname);
> +		} else if (retval) {
> +			rc = -1;
> +			fprintf(stderr,
> +				"failed to sort mcount '%s': %s\n",
> +				(char *)retval, fname);
> +		}
> +	}
>  	return rc;
>  }

-- Steve

[PATCH v5 0/2] ftrace sorting optimization changelog

[Yinan Liu]

Hi,steven

Patch1 added the configuration judgment in build time and boot time.
Patch2 fix code style issue in sorrtable.h.

Best regards!
-- Yinan Liu
 
Yinan Liu (2):
  scripts: ftrace - move the sort-processing in ftrace_init to compile
    time
  script/sorttable: code style improvements

 kernel/trace/ftrace.c   |  11 +++-
 scripts/Makefile        |   2 +-
 scripts/link-vmlinux.sh |   6 +-
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 124 ++++++++++++++++++++++++++++++++++++++--
 5 files changed, 135 insertions(+), 10 deletions(-)

-- 
2.19.1.6.gb485710b

[PATCH v5 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Yinan Liu]

When the kernel starts, the initialization of ftrace takes
up a portion of the time (approximately 6~8ms) to sort mcount
addresses. We can save this time by moving mcount-sorting to
compile time.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
---
 kernel/trace/ftrace.c   |  11 +++-
 scripts/Makefile        |   2 +-
 scripts/link-vmlinux.sh |   6 +-
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
 5 files changed, 133 insertions(+), 8 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7b180f61e6d3..c0f95cae68b5 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6189,8 +6189,15 @@ static int ftrace_process_locs(struct module *mod,
 	if (!count)
 		return 0;
 
-	sort(start, count, sizeof(*start),
-	     ftrace_cmp_ips, NULL);
+	/*
+	 * Sorting mcount in vmlinux at build time depend on
+	 * CONFIG_BUILDTIME_TABLE_SORT, while mcount loc in
+	 * modules can not be sorted at build time.
+	 */
+	if (!IS_ENABLED(CONFIG_BUILDTIME_TABLE_SORT) || mod) {
+		sort(start, count, sizeof(*start),
+		     ftrace_cmp_ips, NULL);
+	}
 
 	start_pg = ftrace_allocate_pages(count);
 	if (!start_pg)
diff --git a/scripts/Makefile b/scripts/Makefile
index 9adb6d247818..b286e112e3b0 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -17,6 +17,7 @@ hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
 hostprogs-always-$(CONFIG_SYSTEM_REVOCATION_LIST)	+= extract-cert
 
 HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
+HOSTLDLIBS_sorttable = -lpthread
 HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
 HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
 HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
@@ -29,7 +30,6 @@ ARCH := x86
 endif
 HOSTCFLAGS_sorttable.o += -I$(srctree)/tools/arch/x86/include
 HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
-HOSTLDLIBS_sorttable = -lpthread
 endif
 
 # The following programs are only built on demand
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 36ef7b37fc5d..e2e1a8f39f15 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -422,6 +422,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
 	${RESOLVE_BTFIDS} vmlinux
 fi
 
+info SYSMAP System.map
+mksysmap vmlinux System.map
+
 if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	info SORTTAB vmlinux
 	if ! sorttable vmlinux; then
@@ -430,9 +433,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	fi
 fi
 
-info SYSMAP System.map
-mksysmap vmlinux System.map
-
 # step a (see comment above)
 if [ -n "${CONFIG_KALLSYMS}" ]; then
 	mksysmap ${kallsyms_vmlinux} .tmp_System.map
diff --git a/scripts/sorttable.c b/scripts/sorttable.c
index 0ef3abfc4a51..11a595ca256b 100644
--- a/scripts/sorttable.c
+++ b/scripts/sorttable.c
@@ -30,6 +30,8 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
 
 #include <tools/be_byteshift.h>
 #include <tools/le_byteshift.h>
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2fefb13..da0911110c2a 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -19,6 +19,9 @@
 
 #undef extable_ent_size
 #undef compare_extable
+#undef get_mcount_loc
+#undef sort_mcount_loc
+#undef elf_mcount_loc
 #undef do_sort
 #undef Elf_Addr
 #undef Elf_Ehdr
@@ -41,6 +44,9 @@
 #ifdef SORTTABLE_64
 # define extable_ent_size	16
 # define compare_extable	compare_extable_64
+# define get_mcount_loc		get_mcount_loc_64
+# define sort_mcount_loc	sort_mcount_loc_64
+# define elf_mcount_loc		elf_mcount_loc_64
 # define do_sort		do_sort_64
 # define Elf_Addr		Elf64_Addr
 # define Elf_Ehdr		Elf64_Ehdr
@@ -62,6 +68,9 @@
 #else
 # define extable_ent_size	8
 # define compare_extable	compare_extable_32
+# define get_mcount_loc		get_mcount_loc_32
+# define sort_mcount_loc	sort_mcount_loc_32
+# define elf_mcount_loc		elf_mcount_loc_32
 # define do_sort		do_sort_32
 # define Elf_Addr		Elf32_Addr
 # define Elf_Ehdr		Elf32_Ehdr
@@ -84,8 +93,6 @@
 
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 /* ORC unwinder only support X86_64 */
-#include <errno.h>
-#include <pthread.h>
 #include <asm/orc_types.h>
 
 #define ERRSTR_MAXSZ	256
@@ -191,7 +198,64 @@ static int compare_extable(const void *a, const void *b)
 		return 1;
 	return 0;
 }
+#if defined CONFIG_FUNCTION_TRACER
+struct elf_mcount_loc {
+	Elf_Ehdr *ehdr;
+	Elf_Shdr *init_data_sec;
+	uint_t start_mcount_loc;
+	uint_t stop_mcount_loc;
+};
+
+/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
+static void *sort_mcount_loc(void *arg)
+{
+	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
+	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
+					+ _r(&(emloc->init_data_sec)->sh_offset);
+	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
+	unsigned char *start_loc = (void *)emloc->ehdr + offset;
+
+	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
+	return NULL;
+}
+
+/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
+static void get_mcount_loc(uint_t *_start, uint_t *_stop)
+{
+	FILE *file_start, *file_stop;
+	char start_buff[20];
+	char stop_buff[20];
+	int len = 0;
+
+	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_start) {
+		fprintf(stderr, "get start_mcount_loc error!");
+		return;
+	}
+
+	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_stop) {
+		fprintf(stderr, "get stop_mcount_loc error!");
+		pclose(file_start);
+		return;
+	}
+
+	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
+		len = strlen(start_buff);
+		start_buff[len - 1] = '\0';
+	}
+	*_start = strtoul(start_buff, NULL, 16);
+
+	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
+		len = strlen(stop_buff);
+		stop_buff[len - 1] = '\0';
+	}
+	*_stop = strtoul(stop_buff, NULL, 16);
 
+	pclose(file_start);
+	pclose(file_stop);
+}
+#endif
 static int do_sort(Elf_Ehdr *ehdr,
 		   char const *const fname,
 		   table_sort_t custom_sort)
@@ -217,6 +281,12 @@ static int do_sort(Elf_Ehdr *ehdr,
 	int idx;
 	unsigned int shnum;
 	unsigned int shstrndx;
+#if defined CONFIG_FUNCTION_TRACER
+	struct elf_mcount_loc mstruct;
+	uint_t _start_mcount_loc = 0;
+	uint_t _stop_mcount_loc = 0;
+	pthread_t mcount_sort_thread;
+#endif
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 	unsigned int orc_ip_size = 0;
 	unsigned int orc_size = 0;
@@ -253,6 +323,17 @@ static int do_sort(Elf_Ehdr *ehdr,
 			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
 						      _r(&s->sh_offset));
 
+#if defined CONFIG_FUNCTION_TRACER
+		/* locate the .init.data section in vmlinux */
+		if (!strcmp(secstrings + idx, ".init.data")) {
+			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
+			mstruct.ehdr = ehdr;
+			mstruct.init_data_sec = s;
+			mstruct.start_mcount_loc = _start_mcount_loc;
+			mstruct.stop_mcount_loc = _stop_mcount_loc;
+		}
+#endif
+
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 		/* locate the ORC unwind tables */
 		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
@@ -294,6 +375,23 @@ static int do_sort(Elf_Ehdr *ehdr,
 		goto out;
 	}
 #endif
+
+#if defined CONFIG_FUNCTION_TRACER
+	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
+		fprintf(stderr,
+			"incomplete mcount's sort in file: %s\n",
+			fname);
+		goto out;
+	}
+
+	/* create thread to sort mcount_loc concurrently */
+	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
+		fprintf(stderr,
+			"pthread_create mcount_sort_thread failed '%s': %s\n",
+			strerror(errno), fname);
+		goto out;
+	}
+#endif
 	if (!extab_sec) {
 		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
 		goto out;
@@ -376,5 +474,23 @@ static int do_sort(Elf_Ehdr *ehdr,
 		}
 	}
 #endif
+
+#if defined CONFIG_FUNCTION_TRACER
+	if (mcount_sort_thread) {
+		void *retval = NULL;
+		/* wait for mcount sort done */
+		rc = pthread_join(mcount_sort_thread, &retval);
+		if (rc) {
+			fprintf(stderr,
+				"pthread_join failed '%s': %s\n",
+				strerror(errno), fname);
+		} else if (retval) {
+			rc = -1;
+			fprintf(stderr,
+				"failed to sort mcount '%s': %s\n",
+				(char *)retval, fname);
+		}
+	}
+#endif
 	return rc;
 }
-- 
2.19.1.6.gb485710b

Re: [PATCH v5 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time

[Steven Rostedt]

On Wed,  1 Dec 2021 13:32:06 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

>  
>  #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
>  /* ORC unwinder only support X86_64 */
> -#include <errno.h>
> -#include <pthread.h>
>  #include <asm/orc_types.h>
>  
>  #define ERRSTR_MAXSZ	256
> @@ -191,7 +198,64 @@ static int compare_extable(const void *a, const void *b)
>  		return 1;
>  	return 0;
>  }
> +#if defined CONFIG_FUNCTION_TRACER

Note, "defined" is best used with parenthesis, but if it's for only a
single define, we usually just use:

#ifdef CONFIG_FUNCTION_TRACER

Same for all he below.

-- Steve


> +struct elf_mcount_loc {
> +	Elf_Ehdr *ehdr;
> +	Elf_Shdr *init_data_sec;
> +	uint_t start_mcount_loc;
> +	uint_t stop_mcount_loc;
> +};
> +
> +/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
> +static void *sort_mcount_loc(void *arg)
> +{
> +	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
> +	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
> +					+ _r(&(emloc->init_data_sec)->sh_offset);
> +	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
> +	unsigned char *start_loc = (void *)emloc->ehdr + offset;
> +
> +	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
> +	return NULL;
> +}
> +
> +/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
> +static void get_mcount_loc(uint_t *_start, uint_t *_stop)
> +{
> +	FILE *file_start, *file_stop;
> +	char start_buff[20];
> +	char stop_buff[20];
> +	int len = 0;
> +
> +	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
> +	if (!file_start) {
> +		fprintf(stderr, "get start_mcount_loc error!");
> +		return;
> +	}
> +
> +	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
> +	if (!file_stop) {
> +		fprintf(stderr, "get stop_mcount_loc error!");
> +		pclose(file_start);
> +		return;
> +	}
> +
> +	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
> +		len = strlen(start_buff);
> +		start_buff[len - 1] = '\0';
> +	}
> +	*_start = strtoul(start_buff, NULL, 16);
> +
> +	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
> +		len = strlen(stop_buff);
> +		stop_buff[len - 1] = '\0';
> +	}
> +	*_stop = strtoul(stop_buff, NULL, 16);
>  
> +	pclose(file_start);
> +	pclose(file_stop);
> +}
> +#endif
>  static int do_sort(Elf_Ehdr *ehdr,
>  		   char const *const fname,
>  		   table_sort_t custom_sort)
> @@ -217,6 +281,12 @@ static int do_sort(Elf_Ehdr *ehdr,
>  	int idx;
>  	unsigned int shnum;
>  	unsigned int shstrndx;
> +#if defined CONFIG_FUNCTION_TRACER
> +	struct elf_mcount_loc mstruct;
> +	uint_t _start_mcount_loc = 0;
> +	uint_t _stop_mcount_loc = 0;
> +	pthread_t mcount_sort_thread;
> +#endif
>  #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
>  	unsigned int orc_ip_size = 0;
>  	unsigned int orc_size = 0;
> @@ -253,6 +323,17 @@ static int do_sort(Elf_Ehdr *ehdr,
>  			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
>  						      _r(&s->sh_offset));
>  
> +#if defined CONFIG_FUNCTION_TRACER
> +		/* locate the .init.data section in vmlinux */
> +		if (!strcmp(secstrings + idx, ".init.data")) {
> +			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
> +			mstruct.ehdr = ehdr;
> +			mstruct.init_data_sec = s;
> +			mstruct.start_mcount_loc = _start_mcount_loc;
> +			mstruct.stop_mcount_loc = _stop_mcount_loc;
> +		}
> +#endif
> +
>  #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
>  		/* locate the ORC unwind tables */
>  		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
> @@ -294,6 +375,23 @@ static int do_sort(Elf_Ehdr *ehdr,
>  		goto out;
>  	}
>  #endif
> +
> +#if defined CONFIG_FUNCTION_TRACER
> +	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
> +		fprintf(stderr,
> +			"incomplete mcount's sort in file: %s\n",
> +			fname);
> +		goto out;
> +	}
> +
> +	/* create thread to sort mcount_loc concurrently */
> +	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
> +		fprintf(stderr,
> +			"pthread_create mcount_sort_thread failed '%s': %s\n",
> +			strerror(errno), fname);
> +		goto out;
> +	}
> +#endif
>  	if (!extab_sec) {
>  		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
>  		goto out;
> @@ -376,5 +474,23 @@ static int do_sort(Elf_Ehdr *ehdr,
>  		}
>  	}
>  #endif
> +
> +#if defined CONFIG_FUNCTION_TRACER
> +	if (mcount_sort_thread) {
> +		void *retval = NULL;
> +		/* wait for mcount sort done */
> +		rc = pthread_join(mcount_sort_thread, &retval);
> +		if (rc) {
> +			fprintf(stderr,
> +				"pthread_join failed '%s': %s\n",
> +				strerror(errno), fname);
> +		} else if (retval) {
> +			rc = -1;
> +			fprintf(stderr,
> +				"failed to sort mcount '%s': %s\n",
> +				(char *)retval, fname);
> +		}
> +	}
> +#endif
>  	return rc;
>  }

[scripts] 12955fb1c5: kernel-selftests.livepatch.test-ftrace.sh.fail

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3411 bytes --]



Greeting,

FYI, we noticed the following commit (built with gcc-9):

commit: 12955fb1c57635f54792fedfdb6cc094b0a706d4 ("[PATCH v5 1/2] scripts: ftrace - move the sort-processing in ftrace_init to compile time")
url: https://github.com/0day-ci/linux/commits/Yinan-Liu/scripts-ftrace-move-the-sort-processing-in-ftrace_init-to-compile-time/20211201-143303
base: https://git.kernel.org/cgit/linux/kernel/git/rostedt/linux-trace.git for-next
patch link: https://lore.kernel.org/lkml/20211201053207.32339-2-yinan@linux.alibaba.com

in testcase: kernel-selftests
version: kernel-selftests-x86_64-a21458fc-1_20211201
with following parameters:

	group: livepatch
	ucode: 0xe2

test-description: The kernel contains a set of "self tests" under the tools/testing/selftests/ directory. These are intended to be small unit tests to exercise individual code paths in the kernel.
test-url: https://www.kernel.org/doc/Documentation/kselftest.txt


on test machine: 4 threads Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz with 32G memory

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):




If you fix the issue, kindly add following tag
Reported-by: kernel test robot <oliver.sang@intel.com>

TAP version 13
1..5
# selftests: livepatch: test-livepatch.sh
# TEST: basic function patching ... ERROR: modprobe: ERROR: could not insert 'test_klp_livepatch': Invalid argument
not ok 1 selftests: livepatch: test-livepatch.sh # exit=1
# selftests: livepatch: test-callbacks.sh
# TEST: target module before livepatch ... ok
# TEST: module_coming notifier ... ok
# TEST: module_going notifier ... ok
# TEST: module_coming and module_going notifiers ... ok
# TEST: target module not present ... ok
# TEST: pre-patch callback -ENODEV ... ok
# TEST: module_coming + pre-patch callback -ENODEV ... ok
# TEST: multiple target modules ... ok
# TEST: busy target module ... ok
# TEST: multiple livepatches ... ok
# TEST: atomic replace ... ok
ok 2 selftests: livepatch: test-callbacks.sh
# selftests: livepatch: test-shadow-vars.sh
# TEST: basic shadow variable API ... ok
ok 3 selftests: livepatch: test-shadow-vars.sh
# selftests: livepatch: test-state.sh
# TEST: system state modification ... ok
# TEST: taking over system state modification ... ok
# TEST: compatible cumulative livepatches ... ok
# TEST: incompatible cumulative livepatches ... ok
ok 4 selftests: livepatch: test-state.sh
# selftests: livepatch: test-ftrace.sh
# TEST: livepatch interaction with ftrace_enabled sysctl ... ERROR: modprobe: ERROR: could not insert 'test_klp_livepatch': Invalid argument
not ok 5 selftests: livepatch: test-ftrace.sh # exit=1
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-12955fb1c57635f54792fedfdb6cc094b0a706d4/tools/testing/selftests/livepatch'



To reproduce:

        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        sudo bin/lkp install job.yaml           # job file is attached in this email
        bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
        sudo bin/lkp run generated-yaml-file

        # if come across any failure that blocks the test,
        # please remove ~/.lkp and /lkp dir to run from a clean state.



---
0DAY/LKP+ Test Infrastructure                   Open Source Technology Center
https://lists.01.org/hyperkitty/list/lkp@lists.01.org       Intel Corporation

Thanks,
Oliver Sang


[-- Attachment #2: config-5.16.0-rc2-00004-g12955fb1c576 --]
[-- Type: text/plain, Size: 177631 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.16.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-9 (Debian 9.3.0-22) 9.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23502
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23502
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# CONFIG_BPF_LSM is not set
# end of BPF subsystem

CONFIG_PREEMPT_BUILD=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
# CONFIG_SCHED_CORE is not set

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_AUDIT_ARCH=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
# CONFIG_PERF_EVENTS_AMD_POWER is not set
CONFIG_PERF_EVENTS_AMD_UNCORE=y
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
CONFIG_X86_SGX=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features

CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=m
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_DPTF is not set
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_PMIC_OPREGION=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_PRMT=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations

CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_INTEL=y
# CONFIG_X86_SGX_KVM is not set
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_XEN is not set
CONFIG_KVM_MMU_AUDIT=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_FC_APPID is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
# CONFIG_ZSWAP_DEFAULT_ON is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
CONFIG_HMM_MIRROR=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
CONFIG_GUP_TEST=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_IPV6_SEG6_BPF=y
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=m
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_FLOW_OFFLOAD=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not set
CONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NFT_REJECT_NETDEV is not set
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_FLOW_TABLE_IPV4=m
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_FLOW_TABLE_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
CONFIG_NFT_BRIDGE_REJECT=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
CONFIG_NET_SCH_ETF=m
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_FQ_PIE=m
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_ETS=m
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_IFE=m
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_CT=m
# CONFIG_NET_ACT_GATE is not set
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_ETAS_ES58X is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers

CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_MTKSDIO is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers

# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=m
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=m
# CONFIG_NFC_NCI_SPI is not set
# CONFIG_NFC_NCI_UART is not set
# CONFIG_NFC_HCI is not set

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_VIRTUAL_NCI=m
# CONFIG_NFC_FDP is not set
# CONFIG_NFC_PN533_USB is not set
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_MRVL_USB is not set
# CONFIG_NFC_ST_NCI_I2C is not set
# CONFIG_NFC_ST_NCI_SPI is not set
# CONFIG_NFC_NXP_NCI is not set
# CONFIG_NFC_S3FWRN5_I2C is not set
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_VMD=y
CONFIG_PCI_HYPERV_INTERFACE=m

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=m
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_LZO is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
CONFIG_ZRAM_WRITEBACK=y
# CONFIG_ZRAM_MEMORY_TRACKING is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=m
CONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not set
# CONFIG_INTEL_MEI_PXP is not set
CONFIG_VMWARE_VMCI=m
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=m
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_UFS_HWMON is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_HYPERV_STORAGE=m
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_EFCT is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=y
CONFIG_GENEVE=y
CONFIG_BAREUDP=m
# CONFIG_GTP is not set
# CONFIG_AMT is not set
CONFIG_MACSEC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=y
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
CONFIG_NET_VRF=y
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not set
CONFIG_IXGBE_IPSEC=y
# CONFIG_IXGBEVF is not set
CONFIG_I40E=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
CONFIG_IGC=y
CONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_MICROSOFT_MANA is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_PRESTERA is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_THUNDER is not set

#
# MDIO Multiplexers
#

#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set
# end of PCS device drivers

# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_RTL8152=y
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_HYPERV_NET is not set
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F3A is not set
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=64
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set

#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_ALDERLAKE is not set
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
CONFIG_PINCTRL_GEMINILAKE=m
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_SUNRISEPOINT=m
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=m

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
CONFIG_GPIO_MOCKUP=m
# CONFIG_GPIO_VIRTIO is not set
# end of Virtual GPIO drivers

# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
# CONFIG_SENSORS_MP2975 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PM6764TR is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
# CONFIG_INT3406_THERMAL is not set
CONFIG_PROC_THERMAL_MMIO_RAPL=m
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# end of Intel thermal drivers

CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_INTEL_PMT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_IR_IMON_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
CONFIG_IR_ENE=m
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_RC_LOOPBACK=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_RC_XBOX_DVD is not set
# CONFIG_IR_TOY is not set

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SECO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support

CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# end of Video4Linux options

#
# Media controller options
#
# CONFIG_MEDIA_CONTROLLER_DVB is not set
# end of Media controller options

#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set

#
# MMC/SDIO DVB adapters
#
# CONFIG_SMS_SDIO_DRV is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_TEST_DRIVERS is not set

#
# FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips

#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_ST_MIPID02 is not set
# end of Miscellaneous helper chips

#
# Camera sensor devices
#
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX214 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV2640 is not set
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV2740 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_OV13B10 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_CCS is not set
# CONFIG_VIDEO_ET8EK8 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# end of Camera sensor devices

#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices

#
# SPI helper chips
#
# CONFIG_VIDEO_GS1662 is not set
# end of SPI helper chips

#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_CXD2880=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
CONFIG_DVB_MXL692=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
CONFIG_DVB_MN88443X=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_HELENE=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_DEBUG_SELFTEST=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
# CONFIG_DRM_I915_GVT_KVMGT is not set

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_I915_DEBUG_MMIO is not set
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
# CONFIG_DRM_I915_DEBUG_GUC is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set
# end of drm/i915 Debugging

#
# drm/i915 Profile Guided Optimisation
#
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# end of drm/i915 Profile Guided Optimisation

CONFIG_DRM_VGEM=y
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_QXL=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_HYPERV is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_LIB_RANDOM=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_FT260 is not set
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NINTENDO is not set
CONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support

#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set
# CONFIG_TYPEC_STUSB160X is not set

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers

# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set

#
# Flash and Torch LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
# CONFIG_EDAC_I10NM is not set
CONFIG_EDAC_PND2=m
# CONFIG_EDAC_IGEN6 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IDXD is not set
# CONFIG_INTEL_IDXD_COMPAT is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_AMD_PTDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options

CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_UIO_HV_GENERIC=m
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MEM=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_RTL8723BS is not set
# CONFIG_R8712U is not set
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ASHMEM is not set
# end of Android

# CONFIG_LTE_GDM724X is not set
# CONFIG_FIREWIRE_SERIAL is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_KS7010 is not set
# CONFIG_PI433 is not set
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_QLGE is not set
# CONFIG_WFX is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_HUAWEI_WMI is not set
# CONFIG_UV_SYSFS is not set
CONFIG_MXM_WMI=m
# CONFIG_PEAQ_WMI is not set
# CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_GIGABYTE_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACER_WMI=m
# CONFIG_AMD_PMC is not set
# CONFIG_ADV_SWBUTTON is not set
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
# CONFIG_MERAKI_MX100 is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_GPD_POCKET_FAN is not set
CONFIG_HP_ACCEL=m
# CONFIG_WIRELESS_HOTKEY is not set
CONFIG_HP_WMI=m
# CONFIG_IBM_RTL is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SENSORS_HDAPS=m
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_THINKPAD_LMI is not set
CONFIG_X86_PLATFORM_DRIVERS_INTEL=y
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_INTEL_SAR_INT1092 is not set
CONFIG_INTEL_PMC_CORE=m

#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support

CONFIG_INTEL_WMI=y
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
CONFIG_INTEL_WMI_THUNDERBOLT=m
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_OAKTRAIL=m
# CONFIG_INTEL_ISHTP_ECLITE is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_COMPAL_LAPTOP=m
# CONFIG_LG_LAPTOP is not set
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
# CONFIG_SYSTEM76_ACPI is not set
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_I2C_MULTI_INSTANTIATE is not set
CONFIG_MLX_PLATFORM=m
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
# CONFIG_MLXREG_IO is not set
# CONFIG_MLXREG_LC is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_XILINX_VCU is not set
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y
# CONFIG_VIRTIO_IOMMU is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_EPF is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_DWC is not set
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_DTPM is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_DEV_DAX_PMEM_COMPAT=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set

#
# HW tracing support
#
CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_REPAIR is not set
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_FREE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_ARCH_POLICY=y
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT=y
# CONFIG_IMA_DISABLE_HTABLE is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_SM4=y
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SM4=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
# CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE is not set
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=m
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACK_HASH_ORDER=20
CONFIG_SBITMAP=y
# end of Library routines

CONFIG_ASN1_ENCODER=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_DEBUG_INFO_BTF=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_DEBUG_INFO_BTF_MODULES=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=8192
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_STACK_VALIDATION=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not set
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
# end of Generic Kernel Debugging Instruments

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
# CONFIG_KASAN_OUTLINE is not set
CONFIG_KASAN_INLINE=y
CONFIG_KASAN_STACK=y
CONFIG_KASAN_VMALLOC=y
# CONFIG_KASAN_MODULE_TEST is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=m
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
CONFIG_TRACE_PREEMPT_TOGGLE=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_MMIOTRACE is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
CONFIG_PREEMPTIRQ_DELAY_TEST=m
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_AUXDISPLAY is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
CONFIG_SAMPLE_TRACE_PRINTK=m
CONFIG_SAMPLE_FTRACE_DIRECT=m
# CONFIG_SAMPLE_FTRACE_DIRECT_MULTI is not set
# CONFIG_SAMPLE_TRACE_ARRAY is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
# CONFIG_SAMPLE_LIVEPATCH is not set
# CONFIG_SAMPLE_CONFIGFS is not set
# CONFIG_SAMPLE_VFIO_MDEV_MTTY is not set
# CONFIG_SAMPLE_VFIO_MDEV_MDPY is not set
# CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB is not set
# CONFIG_SAMPLE_VFIO_MDEV_MBOCHS is not set
# CONFIG_SAMPLE_WATCHDOG is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set

#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_STRSCPY=m
# CONFIG_TEST_KSTRTOX is not set
CONFIG_TEST_PRINTF=m
CONFIG_TEST_SCANF=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_BLACKHOLE_DEV=m
# CONFIG_FIND_BIT_BENCHMARK is not set
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=y
# CONFIG_TEST_UDELAY is not set
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_TEST_MEMCAT_P is not set
CONFIG_TEST_LIVEPATCH=m
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
CONFIG_TEST_HMM=m
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 6121 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='kernel-selftests'
	export testcase='kernel-selftests'
	export category='functional'
	export kconfig='x86_64-rhel-8.3-kselftests'
	export need_memory='2G'
	export need_cpu=2
	export kernel_cmdline='erst_disable'
	export job_origin='kernel-selftests.yaml'
	export queue_cmdline_keys='branch
commit
queue_at_least_once'
	export queue='validate'
	export testbox='lkp-skl-d05'
	export tbox_group='lkp-skl-d05'
	export submit_id='61a8ed8f20ce99ab9bd21d6c'
	export job_file='/lkp/jobs/scheduled/lkp-skl-d05/kernel-selftests-livepatch-ucode=0xe2-debian-10.4-x86_64-20200603.cgz-12955fb1c57635f54792fedfdb6cc094b0a706d4-20211203-43931-m30pjk-4.yaml'
	export id='45575277021eb4a94c24041eac4045a0dd41be9f'
	export queuer_version='/lkp-src'
	export model='Skylake'
	export nr_cpu=4
	export memory='32G'
	export nr_ssd_partitions=1
	export nr_hdd_partitions=4
	export hdd_partitions='/dev/disk/by-id/wwn-0x5000c50091e544de-part*'
	export ssd_partitions='/dev/disk/by-id/wwn-0x55cd2e4151977e28-part2'
	export rootfs_partition='/dev/disk/by-id/wwn-0x55cd2e4151977e28-part1'
	export brand='Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz'
	export commit='12955fb1c57635f54792fedfdb6cc094b0a706d4'
	export need_kconfig_hw='{"E1000E"=>"y"}
SATA_AHCI
DRM_I915'
	export ucode='0xe2'
	export bisect_dmesg=true
	export need_kconfig=\{\"DYNAMIC_DEBUG\"\=\>\"y\"\}'
'\{\"LIVEPATCH\"\=\>\"y,\ v4.0-rc1\"\}'
'\{\"TEST_LIVEPATCH\"\=\>\"m,\ v5.1-rc1\"\}
	export initrds='linux_headers
linux_selftests'
	export enqueue_time='2021-12-03 00:00:16 +0800'
	export _id='61a8ed9f20ce99ab9bd21d6f'
	export _rt='/result/kernel-selftests/livepatch-ucode=0xe2/lkp-skl-d05/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4'
	export user='lkp'
	export compiler='gcc-9'
	export LKP_SERVER='internal-lkp-server'
	export head_commit='c2729d2b5ffcc77cf180816209c2b7f4ca44a613'
	export base_commit='d58071a8a76d779eedab38033ae4c821c30295a5'
	export branch='linux-review/Yinan-Liu/scripts-ftrace-move-the-sort-processing-in-ftrace_init-to-compile-time/20211201-143303'
	export rootfs='debian-10.4-x86_64-20200603.cgz'
	export result_root='/result/kernel-selftests/livepatch-ucode=0xe2/lkp-skl-d05/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/3'
	export scheduler_version='/lkp/lkp/.src-20211202-144518'
	export arch='x86_64'
	export max_uptime=2100
	export initrd='/osimage/debian/debian-10.4-x86_64-20200603.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/jobs/scheduled/lkp-skl-d05/kernel-selftests-livepatch-ucode=0xe2-debian-10.4-x86_64-20200603.cgz-12955fb1c57635f54792fedfdb6cc094b0a706d4-20211203-43931-m30pjk-4.yaml
ARCH=x86_64
kconfig=x86_64-rhel-8.3-kselftests
branch=linux-review/Yinan-Liu/scripts-ftrace-move-the-sort-processing-in-ftrace_init-to-compile-time/20211201-143303
commit=12955fb1c57635f54792fedfdb6cc094b0a706d4
BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/vmlinuz-5.16.0-rc2-00004-g12955fb1c576
erst_disable
max_uptime=2100
RESULT_ROOT=/result/kernel-selftests/livepatch-ucode=0xe2/lkp-skl-d05/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/3
LKP_SERVER=internal-lkp-server
nokaslr
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/modules.cgz'
	export linux_headers_initrd='/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/linux-headers.cgz'
	export linux_selftests_initrd='/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/linux-selftests.cgz'
	export bm_initrd='/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20210707.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/kernel-selftests_20211130.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/kernel-selftests-x86_64-a21458fc-1_20211201.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hw_20200715.cgz'
	export ucode_initrd='/osimage/ucode/intel-ucode-20210222.cgz'
	export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export last_kernel='5.16.0-rc3'
	export repeat_to=6
	export schedule_notify_address=
	export queue_at_least_once=1
	export kernel='/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/vmlinuz-5.16.0-rc2-00004-g12955fb1c576'
	export dequeue_time='2021-12-03 00:08:11 +0800'
	export job_initrd='/lkp/jobs/scheduled/lkp-skl-d05/kernel-selftests-livepatch-ucode=0xe2-debian-10.4-x86_64-20200603.cgz-12955fb1c57635f54792fedfdb6cc094b0a706d4-20211203-43931-m30pjk-4.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test group='livepatch' $LKP_SRC/tests/wrapper kernel-selftests
}

extract_stats()
{
	export stats_part_begin=
	export stats_part_end=

	env group='livepatch' $LKP_SRC/stats/wrapper kernel-selftests
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper meminfo

	$LKP_SRC/stats/wrapper time kernel-selftests.time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper last_state
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper time
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 26380 bytes --]

[-- Attachment #5: kernel-selftests --]
[-- Type: text/plain, Size: 2453 bytes --]

KERNEL SELFTESTS: linux_headers_dir is /usr/src/linux-headers-x86_64-rhel-8.3-kselftests-12955fb1c57635f54792fedfdb6cc094b0a706d4
2021-12-02 16:10:05 ln -sf /usr/bin/clang
2021-12-02 16:10:06 ln -sf /usr/bin/llc
2021-12-02 16:10:06 sed -i s/default_timeout=45/default_timeout=300/ kselftest/runner.sh
2021-12-02 16:10:06 make -C livepatch
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-12955fb1c57635f54792fedfdb6cc094b0a706d4/tools/testing/selftests/livepatch'
make: Nothing to be done for 'all'.
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-12955fb1c57635f54792fedfdb6cc094b0a706d4/tools/testing/selftests/livepatch'
2021-12-02 16:10:06 make run_tests -C livepatch
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-12955fb1c57635f54792fedfdb6cc094b0a706d4/tools/testing/selftests/livepatch'
TAP version 13
1..5
# selftests: livepatch: test-livepatch.sh
# TEST: basic function patching ... ERROR: modprobe: ERROR: could not insert 'test_klp_livepatch': Invalid argument
not ok 1 selftests: livepatch: test-livepatch.sh # exit=1
# selftests: livepatch: test-callbacks.sh
# TEST: target module before livepatch ... ok
# TEST: module_coming notifier ... ok
# TEST: module_going notifier ... ok
# TEST: module_coming and module_going notifiers ... ok
# TEST: target module not present ... ok
# TEST: pre-patch callback -ENODEV ... ok
# TEST: module_coming + pre-patch callback -ENODEV ... ok
# TEST: multiple target modules ... ok
# TEST: busy target module ... ok
# TEST: multiple livepatches ... ok
# TEST: atomic replace ... ok
ok 2 selftests: livepatch: test-callbacks.sh
# selftests: livepatch: test-shadow-vars.sh
# TEST: basic shadow variable API ... ok
ok 3 selftests: livepatch: test-shadow-vars.sh
# selftests: livepatch: test-state.sh
# TEST: system state modification ... ok
# TEST: taking over system state modification ... ok
# TEST: compatible cumulative livepatches ... ok
# TEST: incompatible cumulative livepatches ... ok
ok 4 selftests: livepatch: test-state.sh
# selftests: livepatch: test-ftrace.sh
# TEST: livepatch interaction with ftrace_enabled sysctl ... ERROR: modprobe: ERROR: could not insert 'test_klp_livepatch': Invalid argument
not ok 5 selftests: livepatch: test-ftrace.sh # exit=1
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-12955fb1c57635f54792fedfdb6cc094b0a706d4/tools/testing/selftests/livepatch'

[-- Attachment #6: job.yaml --]
[-- Type: text/plain, Size: 5027 bytes --]

---
:#! jobs/kernel-selftests.yaml:
suite: kernel-selftests
testcase: kernel-selftests
category: functional
kconfig: x86_64-rhel-8.3-kselftests
need_memory: 2G
need_cpu: 2
kernel-selftests:
  group: livepatch
kernel_cmdline: erst_disable
job_origin: kernel-selftests.yaml
:#! queue options:
queue_cmdline_keys:
- branch
- commit
queue: bisect
testbox: lkp-skl-d05
tbox_group: lkp-skl-d05
submit_id: 61a8d08420ce99a5a93d28a6
job_file: "/lkp/jobs/scheduled/lkp-skl-d05/kernel-selftests-livepatch-ucode=0xe2-debian-10.4-x86_64-20200603.cgz-12955fb1c57635f54792fedfdb6cc094b0a706d4-20211202-42409-i5r1qx-0.yaml"
id: 229e819f61921c0b32f7428f6dd0be06f80dc9f1
queuer_version: "/lkp-src"
:#! hosts/lkp-skl-d05:
model: Skylake
nr_cpu: 4
memory: 32G
nr_ssd_partitions: 1
nr_hdd_partitions: 4
hdd_partitions: "/dev/disk/by-id/wwn-0x5000c50091e544de-part*"
ssd_partitions: "/dev/disk/by-id/wwn-0x55cd2e4151977e28-part2"
rootfs_partition: "/dev/disk/by-id/wwn-0x55cd2e4151977e28-part1"
brand: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
:#! include/category/functional:
kmsg:
heartbeat:
meminfo:
:#! include/queue/cyclic:
commit: 12955fb1c57635f54792fedfdb6cc094b0a706d4
:#! include/testbox/lkp-skl-d05:
need_kconfig_hw:
- E1000E: y
- SATA_AHCI
- DRM_I915
ucode: '0xe2'
bisect_dmesg: true
:#! include/kernel-selftests:
need_kconfig:
- DYNAMIC_DEBUG: y
- LIVEPATCH: y, v4.0-rc1
- TEST_LIVEPATCH: m, v5.1-rc1
initrds:
- linux_headers
- linux_selftests
enqueue_time: 2021-12-02 21:56:20.564236737 +08:00
_id: 61a8d08420ce99a5a93d28a6
_rt: "/result/kernel-selftests/livepatch-ucode=0xe2/lkp-skl-d05/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4"
:#! schedule options:
user: lkp
compiler: gcc-9
LKP_SERVER: internal-lkp-server
head_commit: c2729d2b5ffcc77cf180816209c2b7f4ca44a613
base_commit: d58071a8a76d779eedab38033ae4c821c30295a5
branch: linux-devel/devel-hourly-20211201-144946
rootfs: debian-10.4-x86_64-20200603.cgz
result_root: "/result/kernel-selftests/livepatch-ucode=0xe2/lkp-skl-d05/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/0"
scheduler_version: "/lkp/lkp/.src-20211202-144518"
arch: x86_64
max_uptime: 2100
initrd: "/osimage/debian/debian-10.4-x86_64-20200603.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/jobs/scheduled/lkp-skl-d05/kernel-selftests-livepatch-ucode=0xe2-debian-10.4-x86_64-20200603.cgz-12955fb1c57635f54792fedfdb6cc094b0a706d4-20211202-42409-i5r1qx-0.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-8.3-kselftests
- branch=linux-devel/devel-hourly-20211201-144946
- commit=12955fb1c57635f54792fedfdb6cc094b0a706d4
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/vmlinuz-5.16.0-rc2-00004-g12955fb1c576
- erst_disable
- max_uptime=2100
- RESULT_ROOT=/result/kernel-selftests/livepatch-ucode=0xe2/lkp-skl-d05/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/0
- LKP_SERVER=internal-lkp-server
- nokaslr
- selinux=0
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- console=tty0
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- vga=normal
- rw
modules_initrd: "/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/modules.cgz"
linux_headers_initrd: "/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/linux-headers.cgz"
linux_selftests_initrd: "/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/linux-selftests.cgz"
bm_initrd: "/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20210707.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/kernel-selftests_20211130.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/kernel-selftests-x86_64-a21458fc-1_20211201.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hw_20200715.cgz"
ucode_initrd: "/osimage/ucode/intel-ucode-20210222.cgz"
lkp_initrd: "/osimage/user/lkp/lkp-x86_64.cgz"
site: inn
:#! /cephfs/db/releases/20211201170020/lkp-src/include/site/inn:
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer:
watchdog:
:#! runtime status:
last_kernel: 5.16.0-rc3-intel-next-01104-gbf5be101fdf0
schedule_notify_address:
:#! user overrides:
kernel: "/pkg/linux/x86_64-rhel-8.3-kselftests/gcc-9/12955fb1c57635f54792fedfdb6cc094b0a706d4/vmlinuz-5.16.0-rc2-00004-g12955fb1c576"
dequeue_time: 2021-12-02 23:55:18.905748094 +08:00
:#! /cephfs/db/releases/20211202144444/lkp-src/include/site/inn:
job_state: finished
loadavg: 1.13 0.47 0.17 1/140 2285
start_time: '1638460687'
end_time: '1638460714'
version: "/lkp/lkp/.src-20211202-144556:df5cb72f-dirty:e93529ac5"

[-- Attachment #7: reproduce --]
[-- Type: text/plain, Size: 157 bytes --]

ln -sf /usr/bin/clang
ln -sf /usr/bin/llc
sed -i s/default_timeout=45/default_timeout=300/ kselftest/runner.sh
make -C livepatch
make run_tests -C livepatch

[PATCH v5 2/2] script/sorttable: code style improvements

[Yinan Liu]

Modified the code style issue of if() {},
keep the code style consistent.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
---
 scripts/sorttable.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index da0911110c2a..1cf711248d60 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -462,11 +462,11 @@ static int do_sort(Elf_Ehdr *ehdr,
 		void *retval = NULL;
 		/* wait for ORC tables sort done */
 		rc = pthread_join(orc_sort_thread, &retval);
-		if (rc)
+		if (rc) {
 			fprintf(stderr,
 				"pthread_join failed '%s': %s\n",
 				strerror(errno), fname);
-		else if (retval) {
+		} else if (retval) {
 			rc = -1;
 			fprintf(stderr,
 				"failed to sort ORC tables '%s': %s\n",
-- 
2.19.1.6.gb485710b

[PATCH v6 0/2] ftrace sorting optimization changelog

[Yinan Liu]

Modified the ifdef format problem of patch1.

Best regards!
-- Yinan Liu 

Yinan Liu (2):
  scripts: ftrace - move the sort-processing in ftrace_init
  script/sorttable: code style improvements

 kernel/trace/ftrace.c   |  11 +++-
 scripts/Makefile        |   2 +-
 scripts/link-vmlinux.sh |   6 +-
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 124 ++++++++++++++++++++++++++++++++++++++--
 5 files changed, 135 insertions(+), 10 deletions(-)

-- 
2.19.1.6.gb485710b

[PATCH v6 1/2] scripts: ftrace - move the sort-processing in ftrace_init

[Yinan Liu]

When the kernel starts, the initialization of ftrace takes
up a portion of the time (approximately 6~8ms) to sort mcount
addresses. We can save this time by moving mcount-sorting to
compile time.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
---
 kernel/trace/ftrace.c   |  11 +++-
 scripts/Makefile        |   2 +-
 scripts/link-vmlinux.sh |   6 +-
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
 5 files changed, 133 insertions(+), 8 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7b180f61e6d3..c0f95cae68b5 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6189,8 +6189,15 @@ static int ftrace_process_locs(struct module *mod,
 	if (!count)
 		return 0;
 
-	sort(start, count, sizeof(*start),
-	     ftrace_cmp_ips, NULL);
+	/*
+	 * Sorting mcount in vmlinux at build time depend on
+	 * CONFIG_BUILDTIME_TABLE_SORT, while mcount loc in
+	 * modules can not be sorted at build time.
+	 */
+	if (!IS_ENABLED(CONFIG_BUILDTIME_TABLE_SORT) || mod) {
+		sort(start, count, sizeof(*start),
+		     ftrace_cmp_ips, NULL);
+	}
 
 	start_pg = ftrace_allocate_pages(count);
 	if (!start_pg)
diff --git a/scripts/Makefile b/scripts/Makefile
index 9adb6d247818..b286e112e3b0 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -17,6 +17,7 @@ hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
 hostprogs-always-$(CONFIG_SYSTEM_REVOCATION_LIST)	+= extract-cert
 
 HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
+HOSTLDLIBS_sorttable = -lpthread
 HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
 HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
 HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
@@ -29,7 +30,6 @@ ARCH := x86
 endif
 HOSTCFLAGS_sorttable.o += -I$(srctree)/tools/arch/x86/include
 HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
-HOSTLDLIBS_sorttable = -lpthread
 endif
 
 # The following programs are only built on demand
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 36ef7b37fc5d..e2e1a8f39f15 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -422,6 +422,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
 	${RESOLVE_BTFIDS} vmlinux
 fi
 
+info SYSMAP System.map
+mksysmap vmlinux System.map
+
 if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	info SORTTAB vmlinux
 	if ! sorttable vmlinux; then
@@ -430,9 +433,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	fi
 fi
 
-info SYSMAP System.map
-mksysmap vmlinux System.map
-
 # step a (see comment above)
 if [ -n "${CONFIG_KALLSYMS}" ]; then
 	mksysmap ${kallsyms_vmlinux} .tmp_System.map
diff --git a/scripts/sorttable.c b/scripts/sorttable.c
index 0ef3abfc4a51..11a595ca256b 100644
--- a/scripts/sorttable.c
+++ b/scripts/sorttable.c
@@ -30,6 +30,8 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
 
 #include <tools/be_byteshift.h>
 #include <tools/le_byteshift.h>
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2fefb13..a7a5b8078954 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -19,6 +19,9 @@
 
 #undef extable_ent_size
 #undef compare_extable
+#undef get_mcount_loc
+#undef sort_mcount_loc
+#undef elf_mcount_loc
 #undef do_sort
 #undef Elf_Addr
 #undef Elf_Ehdr
@@ -41,6 +44,9 @@
 #ifdef SORTTABLE_64
 # define extable_ent_size	16
 # define compare_extable	compare_extable_64
+# define get_mcount_loc		get_mcount_loc_64
+# define sort_mcount_loc	sort_mcount_loc_64
+# define elf_mcount_loc		elf_mcount_loc_64
 # define do_sort		do_sort_64
 # define Elf_Addr		Elf64_Addr
 # define Elf_Ehdr		Elf64_Ehdr
@@ -62,6 +68,9 @@
 #else
 # define extable_ent_size	8
 # define compare_extable	compare_extable_32
+# define get_mcount_loc		get_mcount_loc_32
+# define sort_mcount_loc	sort_mcount_loc_32
+# define elf_mcount_loc		elf_mcount_loc_32
 # define do_sort		do_sort_32
 # define Elf_Addr		Elf32_Addr
 # define Elf_Ehdr		Elf32_Ehdr
@@ -84,8 +93,6 @@
 
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 /* ORC unwinder only support X86_64 */
-#include <errno.h>
-#include <pthread.h>
 #include <asm/orc_types.h>
 
 #define ERRSTR_MAXSZ	256
@@ -191,7 +198,64 @@ static int compare_extable(const void *a, const void *b)
 		return 1;
 	return 0;
 }
+#ifdef CONFIG_FUNCTION_TRACER
+struct elf_mcount_loc {
+	Elf_Ehdr *ehdr;
+	Elf_Shdr *init_data_sec;
+	uint_t start_mcount_loc;
+	uint_t stop_mcount_loc;
+};
+
+/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
+static void *sort_mcount_loc(void *arg)
+{
+	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
+	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
+					+ _r(&(emloc->init_data_sec)->sh_offset);
+	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
+	unsigned char *start_loc = (void *)emloc->ehdr + offset;
+
+	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
+	return NULL;
+}
+
+/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
+static void get_mcount_loc(uint_t *_start, uint_t *_stop)
+{
+	FILE *file_start, *file_stop;
+	char start_buff[20];
+	char stop_buff[20];
+	int len = 0;
+
+	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_start) {
+		fprintf(stderr, "get start_mcount_loc error!");
+		return;
+	}
+
+	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_stop) {
+		fprintf(stderr, "get stop_mcount_loc error!");
+		pclose(file_start);
+		return;
+	}
+
+	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
+		len = strlen(start_buff);
+		start_buff[len - 1] = '\0';
+	}
+	*_start = strtoul(start_buff, NULL, 16);
+
+	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
+		len = strlen(stop_buff);
+		stop_buff[len - 1] = '\0';
+	}
+	*_stop = strtoul(stop_buff, NULL, 16);
 
+	pclose(file_start);
+	pclose(file_stop);
+}
+#endif
 static int do_sort(Elf_Ehdr *ehdr,
 		   char const *const fname,
 		   table_sort_t custom_sort)
@@ -217,6 +281,12 @@ static int do_sort(Elf_Ehdr *ehdr,
 	int idx;
 	unsigned int shnum;
 	unsigned int shstrndx;
+#ifdef CONFIG_FUNCTION_TRACER
+	struct elf_mcount_loc mstruct;
+	uint_t _start_mcount_loc = 0;
+	uint_t _stop_mcount_loc = 0;
+	pthread_t mcount_sort_thread;
+#endif
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 	unsigned int orc_ip_size = 0;
 	unsigned int orc_size = 0;
@@ -253,6 +323,17 @@ static int do_sort(Elf_Ehdr *ehdr,
 			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
 						      _r(&s->sh_offset));
 
+#ifdef CONFIG_FUNCTION_TRACER
+		/* locate the .init.data section in vmlinux */
+		if (!strcmp(secstrings + idx, ".init.data")) {
+			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
+			mstruct.ehdr = ehdr;
+			mstruct.init_data_sec = s;
+			mstruct.start_mcount_loc = _start_mcount_loc;
+			mstruct.stop_mcount_loc = _stop_mcount_loc;
+		}
+#endif
+
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 		/* locate the ORC unwind tables */
 		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
@@ -294,6 +375,23 @@ static int do_sort(Elf_Ehdr *ehdr,
 		goto out;
 	}
 #endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
+		fprintf(stderr,
+			"incomplete mcount's sort in file: %s\n",
+			fname);
+		goto out;
+	}
+
+	/* create thread to sort mcount_loc concurrently */
+	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
+		fprintf(stderr,
+			"pthread_create mcount_sort_thread failed '%s': %s\n",
+			strerror(errno), fname);
+		goto out;
+	}
+#endif
 	if (!extab_sec) {
 		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
 		goto out;
@@ -376,5 +474,23 @@ static int do_sort(Elf_Ehdr *ehdr,
 		}
 	}
 #endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+	if (mcount_sort_thread) {
+		void *retval = NULL;
+		/* wait for mcount sort done */
+		rc = pthread_join(mcount_sort_thread, &retval);
+		if (rc) {
+			fprintf(stderr,
+				"pthread_join failed '%s': %s\n",
+				strerror(errno), fname);
+		} else if (retval) {
+			rc = -1;
+			fprintf(stderr,
+				"failed to sort mcount '%s': %s\n",
+				(char *)retval, fname);
+		}
+	}
+#endif
 	return rc;
 }
-- 
2.19.1.6.gb485710b

Re: [PATCH v6 1/2] scripts: ftrace - move the sort-processing in ftrace_init

[Steven Rostedt]

[-- Attachment #1: Type: text/plain, Size: 10865 bytes --]

On Thu,  2 Dec 2021 10:16:05 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

> When the kernel starts, the initialization of ftrace takes
> up a portion of the time (approximately 6~8ms) to sort mcount
> addresses. We can save this time by moving mcount-sorting to
> compile time.
> 
> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> Reported-by: kernel test robot <lkp@intel.com>

After applying this, I get a failure on the kprobe self tests at boot up:

 Testing ftrace filter: OK
 trace_kprobe: Testing kprobe tracing: 
 trace_kprobe: Could not probe notrace function kprobe_trace_selftest_target
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 1 at kernel/trace/trace_kprobe.c:1973 kprobe_trace_self_tests_init+0x5c/0x497
 Modules linked in:
 CPU: 2 PID: 1 Comm: swapper/0 Tainted: G        W         5.16.0-rc3-test+ #40
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
 RIP: 0010:kprobe_trace_self_tests_init+0x5c/0x497
 Code: 5f d7 94 ff 00 0f 85 48 04 00 00 48 c7 c7 c0 ff 8e 88 e8 6b bb cd fd 48 c7 c7 20 00 8f 88 e8 a9 b6 db fc 41 89 c4 85 c0 74 16 <0f> 0b 48 c7 c7 a0 00 8f 88 41 bc 01 00 00 00 e8 44 bb cd fd eb 33
 RSP: 0000:ffffc90000037d00 EFLAGS: 00010282
 RAX: 00000000ffffffea RBX: 0000000000000000 RCX: dffffc0000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880c2b33eb4
 RBP: 1ffff92000006fa9 R08: ffffffff872e1900 R09: 0000000080000171
 R10: fffff52000006f15 R11: 0000000000000001 R12: 00000000ffffffea
 R13: 0000000000000007 R14: ffffffff8a608098 R15: ffffffff8a6080a0
 FS:  0000000000000000(0000) GS:ffff8880c2b00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000009260e001 CR4: 00000000001706e0
 Call Trace:
  <TASK>
  ? init_kprobe_trace+0x1c4/0x1c4
  do_one_initcall+0x89/0x2b0
  ? trace_event_raw_event_initcall_finish+0x150/0x150
  ? parameq+0x90/0x90
  ? _raw_spin_unlock_irqrestore+0x19/0x40
  kernel_init_freeable+0x35a/0x3e7
  ? console_on_rootfs+0x52/0x52
  ? _raw_spin_unlock+0x30/0x30
  ? rest_init+0xf0/0xf0
  ? rest_init+0xf0/0xf0
  kernel_init+0x19/0x140
  ret_from_fork+0x22/0x30
  </TASK>
 ---[ end trace 27c06839fac37d16 ]---


Config attached.

-- Steve




> ---
>  kernel/trace/ftrace.c   |  11 +++-
>  scripts/Makefile        |   2 +-
>  scripts/link-vmlinux.sh |   6 +-
>  scripts/sorttable.c     |   2 +
>  scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
>  5 files changed, 133 insertions(+), 8 deletions(-)
> 
> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index 7b180f61e6d3..c0f95cae68b5 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -6189,8 +6189,15 @@ static int ftrace_process_locs(struct module *mod,
>  	if (!count)
>  		return 0;
>  
> -	sort(start, count, sizeof(*start),
> -	     ftrace_cmp_ips, NULL);
> +	/*
> +	 * Sorting mcount in vmlinux at build time depend on
> +	 * CONFIG_BUILDTIME_TABLE_SORT, while mcount loc in
> +	 * modules can not be sorted at build time.
> +	 */
> +	if (!IS_ENABLED(CONFIG_BUILDTIME_TABLE_SORT) || mod) {
> +		sort(start, count, sizeof(*start),
> +		     ftrace_cmp_ips, NULL);
> +	}
>  
>  	start_pg = ftrace_allocate_pages(count);
>  	if (!start_pg)
> diff --git a/scripts/Makefile b/scripts/Makefile
> index 9adb6d247818..b286e112e3b0 100644
> --- a/scripts/Makefile
> +++ b/scripts/Makefile
> @@ -17,6 +17,7 @@ hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
>  hostprogs-always-$(CONFIG_SYSTEM_REVOCATION_LIST)	+= extract-cert
>  
>  HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
> +HOSTLDLIBS_sorttable = -lpthread
>  HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
>  HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
>  HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
> @@ -29,7 +30,6 @@ ARCH := x86
>  endif
>  HOSTCFLAGS_sorttable.o += -I$(srctree)/tools/arch/x86/include
>  HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
> -HOSTLDLIBS_sorttable = -lpthread
>  endif
>  
>  # The following programs are only built on demand
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index 36ef7b37fc5d..e2e1a8f39f15 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -422,6 +422,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
>  	${RESOLVE_BTFIDS} vmlinux
>  fi
>  
> +info SYSMAP System.map
> +mksysmap vmlinux System.map
> +
>  if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
>  	info SORTTAB vmlinux
>  	if ! sorttable vmlinux; then
> @@ -430,9 +433,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
>  	fi
>  fi
>  
> -info SYSMAP System.map
> -mksysmap vmlinux System.map
> -
>  # step a (see comment above)
>  if [ -n "${CONFIG_KALLSYMS}" ]; then
>  	mksysmap ${kallsyms_vmlinux} .tmp_System.map
> diff --git a/scripts/sorttable.c b/scripts/sorttable.c
> index 0ef3abfc4a51..11a595ca256b 100644
> --- a/scripts/sorttable.c
> +++ b/scripts/sorttable.c
> @@ -30,6 +30,8 @@
>  #include <stdlib.h>
>  #include <string.h>
>  #include <unistd.h>
> +#include <errno.h>
> +#include <pthread.h>
>  
>  #include <tools/be_byteshift.h>
>  #include <tools/le_byteshift.h>
> diff --git a/scripts/sorttable.h b/scripts/sorttable.h
> index a2baa2fefb13..a7a5b8078954 100644
> --- a/scripts/sorttable.h
> +++ b/scripts/sorttable.h
> @@ -19,6 +19,9 @@
>  
>  #undef extable_ent_size
>  #undef compare_extable
> +#undef get_mcount_loc
> +#undef sort_mcount_loc
> +#undef elf_mcount_loc
>  #undef do_sort
>  #undef Elf_Addr
>  #undef Elf_Ehdr
> @@ -41,6 +44,9 @@
>  #ifdef SORTTABLE_64
>  # define extable_ent_size	16
>  # define compare_extable	compare_extable_64
> +# define get_mcount_loc		get_mcount_loc_64
> +# define sort_mcount_loc	sort_mcount_loc_64
> +# define elf_mcount_loc		elf_mcount_loc_64
>  # define do_sort		do_sort_64
>  # define Elf_Addr		Elf64_Addr
>  # define Elf_Ehdr		Elf64_Ehdr
> @@ -62,6 +68,9 @@
>  #else
>  # define extable_ent_size	8
>  # define compare_extable	compare_extable_32
> +# define get_mcount_loc		get_mcount_loc_32
> +# define sort_mcount_loc	sort_mcount_loc_32
> +# define elf_mcount_loc		elf_mcount_loc_32
>  # define do_sort		do_sort_32
>  # define Elf_Addr		Elf32_Addr
>  # define Elf_Ehdr		Elf32_Ehdr
> @@ -84,8 +93,6 @@
>  
>  #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
>  /* ORC unwinder only support X86_64 */
> -#include <errno.h>
> -#include <pthread.h>
>  #include <asm/orc_types.h>
>  
>  #define ERRSTR_MAXSZ	256
> @@ -191,7 +198,64 @@ static int compare_extable(const void *a, const void *b)
>  		return 1;
>  	return 0;
>  }
> +#ifdef CONFIG_FUNCTION_TRACER
> +struct elf_mcount_loc {
> +	Elf_Ehdr *ehdr;
> +	Elf_Shdr *init_data_sec;
> +	uint_t start_mcount_loc;
> +	uint_t stop_mcount_loc;
> +};
> +
> +/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
> +static void *sort_mcount_loc(void *arg)
> +{
> +	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
> +	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
> +					+ _r(&(emloc->init_data_sec)->sh_offset);
> +	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
> +	unsigned char *start_loc = (void *)emloc->ehdr + offset;
> +
> +	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
> +	return NULL;
> +}
> +
> +/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
> +static void get_mcount_loc(uint_t *_start, uint_t *_stop)
> +{
> +	FILE *file_start, *file_stop;
> +	char start_buff[20];
> +	char stop_buff[20];
> +	int len = 0;
> +
> +	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
> +	if (!file_start) {
> +		fprintf(stderr, "get start_mcount_loc error!");
> +		return;
> +	}
> +
> +	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
> +	if (!file_stop) {
> +		fprintf(stderr, "get stop_mcount_loc error!");
> +		pclose(file_start);
> +		return;
> +	}
> +
> +	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
> +		len = strlen(start_buff);
> +		start_buff[len - 1] = '\0';
> +	}
> +	*_start = strtoul(start_buff, NULL, 16);
> +
> +	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
> +		len = strlen(stop_buff);
> +		stop_buff[len - 1] = '\0';
> +	}
> +	*_stop = strtoul(stop_buff, NULL, 16);
>  
> +	pclose(file_start);
> +	pclose(file_stop);
> +}
> +#endif
>  static int do_sort(Elf_Ehdr *ehdr,
>  		   char const *const fname,
>  		   table_sort_t custom_sort)
> @@ -217,6 +281,12 @@ static int do_sort(Elf_Ehdr *ehdr,
>  	int idx;
>  	unsigned int shnum;
>  	unsigned int shstrndx;
> +#ifdef CONFIG_FUNCTION_TRACER
> +	struct elf_mcount_loc mstruct;
> +	uint_t _start_mcount_loc = 0;
> +	uint_t _stop_mcount_loc = 0;
> +	pthread_t mcount_sort_thread;
> +#endif
>  #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
>  	unsigned int orc_ip_size = 0;
>  	unsigned int orc_size = 0;
> @@ -253,6 +323,17 @@ static int do_sort(Elf_Ehdr *ehdr,
>  			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
>  						      _r(&s->sh_offset));
>  
> +#ifdef CONFIG_FUNCTION_TRACER
> +		/* locate the .init.data section in vmlinux */
> +		if (!strcmp(secstrings + idx, ".init.data")) {
> +			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
> +			mstruct.ehdr = ehdr;
> +			mstruct.init_data_sec = s;
> +			mstruct.start_mcount_loc = _start_mcount_loc;
> +			mstruct.stop_mcount_loc = _stop_mcount_loc;
> +		}
> +#endif
> +
>  #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
>  		/* locate the ORC unwind tables */
>  		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
> @@ -294,6 +375,23 @@ static int do_sort(Elf_Ehdr *ehdr,
>  		goto out;
>  	}
>  #endif
> +
> +#ifdef CONFIG_FUNCTION_TRACER
> +	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
> +		fprintf(stderr,
> +			"incomplete mcount's sort in file: %s\n",
> +			fname);
> +		goto out;
> +	}
> +
> +	/* create thread to sort mcount_loc concurrently */
> +	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
> +		fprintf(stderr,
> +			"pthread_create mcount_sort_thread failed '%s': %s\n",
> +			strerror(errno), fname);
> +		goto out;
> +	}
> +#endif
>  	if (!extab_sec) {
>  		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
>  		goto out;
> @@ -376,5 +474,23 @@ static int do_sort(Elf_Ehdr *ehdr,
>  		}
>  	}
>  #endif
> +
> +#ifdef CONFIG_FUNCTION_TRACER
> +	if (mcount_sort_thread) {
> +		void *retval = NULL;
> +		/* wait for mcount sort done */
> +		rc = pthread_join(mcount_sort_thread, &retval);
> +		if (rc) {
> +			fprintf(stderr,
> +				"pthread_join failed '%s': %s\n",
> +				strerror(errno), fname);
> +		} else if (retval) {
> +			rc = -1;
> +			fprintf(stderr,
> +				"failed to sort mcount '%s': %s\n",
> +				(char *)retval, fname);
> +		}
> +	}
> +#endif
>  	return rc;
>  }


[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 37215 bytes --]

Re: [PATCH v6 1/2] scripts: ftrace - move the sort-processing in ftrace_init

[Masami Hiramatsu]

Hi Steve,

On Thu, 2 Dec 2021 12:58:00 -0500
Steven Rostedt <rostedt@goodmis.org> wrote:

> On Thu,  2 Dec 2021 10:16:05 +0800
> Yinan Liu <yinan@linux.alibaba.com> wrote:
> 
> > When the kernel starts, the initialization of ftrace takes
> > up a portion of the time (approximately 6~8ms) to sort mcount
> > addresses. We can save this time by moving mcount-sorting to
> > compile time.
> > 
> > Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> > Reported-by: kernel test robot <lkp@intel.com>
> 
> After applying this, I get a failure on the kprobe self tests at boot up:
> 
>  Testing ftrace filter: OK
>  trace_kprobe: Testing kprobe tracing: 
>  trace_kprobe: Could not probe notrace function kprobe_trace_selftest_target
>  ------------[ cut here ]------------
>  WARNING: CPU: 2 PID: 1 at kernel/trace/trace_kprobe.c:1973 kprobe_trace_self_tests_init+0x5c/0x497
>  Modules linked in:
>  CPU: 2 PID: 1 Comm: swapper/0 Tainted: G        W         5.16.0-rc3-test+ #40
>  Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
>  RIP: 0010:kprobe_trace_self_tests_init+0x5c/0x497
>  Code: 5f d7 94 ff 00 0f 85 48 04 00 00 48 c7 c7 c0 ff 8e 88 e8 6b bb cd fd 48 c7 c7 20 00 8f 88 e8 a9 b6 db fc 41 89 c4 85 c0 74 16 <0f> 0b 48 c7 c7 a0 00 8f 88 41 bc 01 00 00 00 e8 44 bb cd fd eb 33
>  RSP: 0000:ffffc90000037d00 EFLAGS: 00010282
>  RAX: 00000000ffffffea RBX: 0000000000000000 RCX: dffffc0000000000
>  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880c2b33eb4
>  RBP: 1ffff92000006fa9 R08: ffffffff872e1900 R09: 0000000080000171
>  R10: fffff52000006f15 R11: 0000000000000001 R12: 00000000ffffffea
>  R13: 0000000000000007 R14: ffffffff8a608098 R15: ffffffff8a6080a0
>  FS:  0000000000000000(0000) GS:ffff8880c2b00000(0000) knlGS:0000000000000000
>  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>  CR2: 0000000000000000 CR3: 000000009260e001 CR4: 00000000001706e0
>  Call Trace:
>   <TASK>
>   ? init_kprobe_trace+0x1c4/0x1c4
>   do_one_initcall+0x89/0x2b0
>   ? trace_event_raw_event_initcall_finish+0x150/0x150
>   ? parameq+0x90/0x90
>   ? _raw_spin_unlock_irqrestore+0x19/0x40
>   kernel_init_freeable+0x35a/0x3e7
>   ? console_on_rootfs+0x52/0x52
>   ? _raw_spin_unlock+0x30/0x30
>   ? rest_init+0xf0/0xf0
>   ? rest_init+0xf0/0xf0
>   kernel_init+0x19/0x140
>   ret_from_fork+0x22/0x30
>   </TASK>
>  ---[ end trace 27c06839fac37d16 ]---

I confirmed this warning, but also I saw below warning too.
Maybe this also came from same commit?

[    4.936720] Testing tracer function_graph: FAILED!
[    6.186714] ------------[ cut here ]------------
[    6.187301] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1953 run_tracer_selftest+0x13b/0x192
[    6.187698] Modules linked in:
[    6.188698] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-rc3+ #174
[    6.189381] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/4
[    6.189698] RIP: 0010:run_tracer_selftest+0x13b/0x192
[    6.190698] Code: 60 48 c7 c6 00 6b 35 82 48 89 df e8 d3 18 33 00 4c 89 2d a4 82 a8 00 41 89 c4 b
[    6.191698] RSP: 0000:ffffc90000013e48 EFLAGS: 00010246
[    6.192250] RAX: 0000000000000007 RBX: ffffffff823ff940 RCX: ffff88807dc00000
[    6.192697] RDX: 0000000000000000 RSI: ffffffff810c7983 RDI: ffffffff810c7983
[    6.193697] RBP: ffffc90000013e60 R08: 0000000000000000 R09: ffffc90000013c40
[    6.194415] R10: 0000000000000001 R11: 0000000000000001 R12: 00000000ffffffed
[    6.194697] R13: ffffffff8241c620 R14: ffffffff8266e290 R15: 0000000000000000
[    6.195698] FS:  0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[    6.196698] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    6.197317] CR2: 0000000000000000 CR3: 000000000220c000 CR4: 00000000000006b0
[    6.197700] Call Trace:
[    6.198698]  <TASK>
[    6.199017]  register_tracer+0x123/0x1d4
[    6.199698]  ? init_graph_tracefs+0x2d/0x2d
[    6.200159]  init_graph_trace+0x62/0x64
[    6.200583]  do_one_initcall+0x48/0x200
[    6.200699]  kernel_init_freeable+0x1f0/0x23f
[    6.201180]  ? rest_init+0xd0/0xd0
[    6.201699]  kernel_init+0x1a/0x130
[    6.202132]  ret_from_fork+0x22/0x30
[    6.202703]  </TASK>
[    6.203098] ---[ end trace e84e39016448db0f ]---
[    6.203804] NET: Registered PF_NETLINK/PF_ROUTE protocol family

Thank you,


-- 
Masami Hiramatsu <mhiramat@kernel.org>

Re: [PATCH v6 1/2] scripts: ftrace - move the sort-processing in ftrace_init

[Steven Rostedt]

On Thu, 2 Dec 2021 12:58:00 -0500
Steven Rostedt <rostedt@goodmis.org> wrote:

> On Thu,  2 Dec 2021 10:16:05 +0800
> Yinan Liu <yinan@linux.alibaba.com> wrote:
> 
> > When the kernel starts, the initialization of ftrace takes
> > up a portion of the time (approximately 6~8ms) to sort mcount
> > addresses. We can save this time by moving mcount-sorting to
> > compile time.
> > 
> > Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> > Reported-by: kernel test robot <lkp@intel.com>  
> 
> After applying this, I get a failure on the kprobe self tests at boot up:
> 
>  Testing ftrace filter: OK
>  trace_kprobe: Testing kprobe tracing: 
>  trace_kprobe: Could not probe notrace function kprobe_trace_selftest_target
>  ------------[ cut here ]------------
>  WARNING: CPU: 2 PID: 1 at kernel/trace/trace_kprobe.c:1973 kprobe_trace_self_tests_init+0x5c/0x497
>  Modules linked in:

And I added the below patch, and it shows that the section is not properly
sorted. Something went wrong with your sorting.

I plan on keeping this check, at least as a compile option, to make sure
that the output is sorted, otherwise things will silently fail if they are
not.

This patch produced:

[    1.315419] ftrace: allocating 43510 entries in 170 pages
[    1.320638] ------------[ cut here ]------------
[    1.325227] [3] x86_pnpbios_disabled+0x0/0x1c at 8a51c707 is not sorted with __traceiter_initcall_level+0x0/0x60 at 87000660

I'm dropping the patches until this is "sorted out" :-)

-- Steve

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 9ca63df6553a..b112d00ba534 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6388,6 +6388,19 @@ static int ftrace_cmp_ips(const void *a, const void
*b) return 0;
 }
 
+static void test_is_sorted(unsigned long *start, unsigned long count)
+{
+	int i;
+
+	for (i = 1; i < count; i++) {
+		if (WARN(start[i - 1] > start[i],
+			 "[%d] %pS at %x is not sorted with %pS at %x\n",
i,
+			 (void *)start[i - 1], start[i - 1],
+			 (void *)start[i], start[i]))
+			break;
+	}
+}
+
 static int ftrace_process_locs(struct module *mod,
 			       unsigned long *start,
 			       unsigned long *end)
@@ -6414,6 +6427,8 @@ static int ftrace_process_locs(struct module *mod,
 	if (!IS_ENABLED(CONFIG_BUILDTIME_TABLE_SORT) || mod) {
 		sort(start, count, sizeof(*start),
 		     ftrace_cmp_ips, NULL);
+	} else {
+		test_is_sorted(start, count);
 	}
 
 	start_pg = ftrace_allocate_pages(count);

Re: [PATCH v6 1/2] scripts: ftrace - move the sort-processing in ftrace_init

[Yinan Liu]

>> After applying this, I get a failure on the kprobe self tests at boot up:
>>
>>   Testing ftrace filter: OK
>>   trace_kprobe: Testing kprobe tracing:
>>   trace_kprobe: Could not probe notrace function kprobe_trace_selftest_target
>>   ------------[ cut here ]------------
>>   WARNING: CPU: 2 PID: 1 at kernel/trace/trace_kprobe.c:1973 kprobe_trace_self_tests_init+0x5c/0x497
>>   Modules linked in:
> 
> And I added the below patch, and it shows that the section is not properly
> sorted. Something went wrong with your sorting.
> 
> I plan on keeping this check, at least as a compile option, to make sure
> that the output is sorted, otherwise things will silently fail if they are
> not.
> 
> This patch produced:
> 
> [    1.315419] ftrace: allocating 43510 entries in 170 pages
> [    1.320638] ------------[ cut here ]------------
> [    1.325227] [3] x86_pnpbios_disabled+0x0/0x1c at 8a51c707 is not sorted with __traceiter_initcall_level+0x0/0x60 at 87000660
> 
> I'm dropping the patches until this is "sorted out" :-)
> 
> -- Steve
>
Hi, steven

Sorry, I just saw the email yesterday. Recently my computer is not 
around. I'm not sure what went wrong at the moment. I will fix it.



Best regards!
-- Yinan Liu

[PATCH v6 2/2] script/sorttable: code style improvements

[Yinan Liu]

Modified the code style issue of if() {},
keep the code style consistent.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
---
 scripts/sorttable.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a7a5b8078954..7d51e53ba6aa 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -462,11 +462,11 @@ static int do_sort(Elf_Ehdr *ehdr,
 		void *retval = NULL;
 		/* wait for ORC tables sort done */
 		rc = pthread_join(orc_sort_thread, &retval);
-		if (rc)
+		if (rc) {
 			fprintf(stderr,
 				"pthread_join failed '%s': %s\n",
 				strerror(errno), fname);
-		else if (retval) {
+		} else if (retval) {
 			rc = -1;
 			fprintf(stderr,
 				"failed to sort ORC tables '%s': %s\n",
-- 
2.19.1.6.gb485710b

Re: [PATCH v6 0/2] ftrace sorting optimization changelog

[Peter Zijlstra]

On Thu, Dec 02, 2021 at 10:16:04AM +0800, Yinan Liu wrote:
> Modified the ifdef format problem of patch1.
> 
> Best regards!
> -- Yinan Liu 
> 
> Yinan Liu (2):
>   scripts: ftrace - move the sort-processing in ftrace_init
>   script/sorttable: code style improvements

Acked-by: Peter Zijlstr (Intel) <peterz@infradead.org>

[PATCH v7 0/2] ftrace sorting optimization

[Yinan Liu]

Hi, Steven

In fact, the code enclosed by ifdef CONFIG_FUNCTION_TRACER 
does not take effect. I saw similar usage under script and 
judged directly after the compilation is passed, without 
checking whether the sorting takes effect. Sorry for my 
negligence.

Now, after the modification, the patch works normally and 
passes the test case of livepatch's selftest which reported 
by robot.  

Yinan Liu (2):
  scripts: ftrace - move the sort-processing in ftrace_init
  script/sorttable: code style improvements

 kernel/trace/ftrace.c   |  11 +++-
 scripts/Makefile        |   6 +-
 scripts/link-vmlinux.sh |   6 +-
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 124 ++++++++++++++++++++++++++++++++++++++--
 5 files changed, 139 insertions(+), 10 deletions(-)

-- 
2.27.0

[PATCH v7 1/2] scripts: ftrace - move the sort-processing in ftrace_init

[Yinan Liu]

When the kernel starts, the initialization of ftrace takes
up a portion of the time (approximately 6~8ms) to sort mcount
addresses. We can save this time by moving mcount-sorting to
compile time.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
---
 kernel/trace/ftrace.c   |  11 +++-
 scripts/Makefile        |   6 +-
 scripts/link-vmlinux.sh |   6 +-
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
 5 files changed, 137 insertions(+), 8 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 30bc880c3849..9ca63df6553a 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6406,8 +6406,15 @@ static int ftrace_process_locs(struct module *mod,
 	if (!count)
 		return 0;
 
-	sort(start, count, sizeof(*start),
-	     ftrace_cmp_ips, NULL);
+	/*
+	 * Sorting mcount in vmlinux at build time depend on
+	 * CONFIG_BUILDTIME_TABLE_SORT, while mcount loc in
+	 * modules can not be sorted at build time.
+	 */
+	if (!IS_ENABLED(CONFIG_BUILDTIME_TABLE_SORT) || mod) {
+		sort(start, count, sizeof(*start),
+		     ftrace_cmp_ips, NULL);
+	}
 
 	start_pg = ftrace_allocate_pages(count);
 	if (!start_pg)
diff --git a/scripts/Makefile b/scripts/Makefile
index 9adb6d247818..d27503469f4b 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -17,6 +17,7 @@ hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
 hostprogs-always-$(CONFIG_SYSTEM_REVOCATION_LIST)	+= extract-cert
 
 HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
+HOSTLDLIBS_sorttable = -lpthread
 HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
 HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
 HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
@@ -29,7 +30,10 @@ ARCH := x86
 endif
 HOSTCFLAGS_sorttable.o += -I$(srctree)/tools/arch/x86/include
 HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
-HOSTLDLIBS_sorttable = -lpthread
+endif
+
+ifdef CONFIG_FUNCTION_TRACER
+HOSTCFLAGS_sorttable.o += -DMCOUNT_SORT_ENABLED
 endif
 
 # The following programs are only built on demand
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 5cdd9bc5c385..dd9955f45774 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -400,6 +400,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
 	${RESOLVE_BTFIDS} vmlinux
 fi
 
+info SYSMAP System.map
+mksysmap vmlinux System.map
+
 if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	info SORTTAB vmlinux
 	if ! sorttable vmlinux; then
@@ -408,9 +411,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	fi
 fi
 
-info SYSMAP System.map
-mksysmap vmlinux System.map
-
 # step a (see comment above)
 if [ -n "${CONFIG_KALLSYMS}" ]; then
 	mksysmap ${kallsyms_vmlinux} .tmp_System.map
diff --git a/scripts/sorttable.c b/scripts/sorttable.c
index b7c2ad71f9cf..70bdc787ddfb 100644
--- a/scripts/sorttable.c
+++ b/scripts/sorttable.c
@@ -30,6 +30,8 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
 
 #include <tools/be_byteshift.h>
 #include <tools/le_byteshift.h>
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2fefb13..d1fbee1f81ef 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -19,6 +19,9 @@
 
 #undef extable_ent_size
 #undef compare_extable
+#undef get_mcount_loc
+#undef sort_mcount_loc
+#undef elf_mcount_loc
 #undef do_sort
 #undef Elf_Addr
 #undef Elf_Ehdr
@@ -41,6 +44,9 @@
 #ifdef SORTTABLE_64
 # define extable_ent_size	16
 # define compare_extable	compare_extable_64
+# define get_mcount_loc		get_mcount_loc_64
+# define sort_mcount_loc	sort_mcount_loc_64
+# define elf_mcount_loc		elf_mcount_loc_64
 # define do_sort		do_sort_64
 # define Elf_Addr		Elf64_Addr
 # define Elf_Ehdr		Elf64_Ehdr
@@ -62,6 +68,9 @@
 #else
 # define extable_ent_size	8
 # define compare_extable	compare_extable_32
+# define get_mcount_loc		get_mcount_loc_32
+# define sort_mcount_loc	sort_mcount_loc_32
+# define elf_mcount_loc		elf_mcount_loc_32
 # define do_sort		do_sort_32
 # define Elf_Addr		Elf32_Addr
 # define Elf_Ehdr		Elf32_Ehdr
@@ -84,8 +93,6 @@
 
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 /* ORC unwinder only support X86_64 */
-#include <errno.h>
-#include <pthread.h>
 #include <asm/orc_types.h>
 
 #define ERRSTR_MAXSZ	256
@@ -191,7 +198,64 @@ static int compare_extable(const void *a, const void *b)
 		return 1;
 	return 0;
 }
+#ifdef MCOUNT_SORT_ENABLED
+struct elf_mcount_loc {
+	Elf_Ehdr *ehdr;
+	Elf_Shdr *init_data_sec;
+	uint_t start_mcount_loc;
+	uint_t stop_mcount_loc;
+};
+
+/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
+static void *sort_mcount_loc(void *arg)
+{
+	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
+	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
+					+ _r(&(emloc->init_data_sec)->sh_offset);
+	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
+	unsigned char *start_loc = (void *)emloc->ehdr + offset;
+
+	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
+	return NULL;
+}
+
+/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
+static void get_mcount_loc(uint_t *_start, uint_t *_stop)
+{
+	FILE *file_start, *file_stop;
+	char start_buff[20];
+	char stop_buff[20];
+	int len = 0;
+
+	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_start) {
+		fprintf(stderr, "get start_mcount_loc error!");
+		return;
+	}
+
+	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_stop) {
+		fprintf(stderr, "get stop_mcount_loc error!");
+		pclose(file_start);
+		return;
+	}
+
+	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
+		len = strlen(start_buff);
+		start_buff[len - 1] = '\0';
+	}
+	*_start = strtoul(start_buff, NULL, 16);
+
+	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
+		len = strlen(stop_buff);
+		stop_buff[len - 1] = '\0';
+	}
+	*_stop = strtoul(stop_buff, NULL, 16);
 
+	pclose(file_start);
+	pclose(file_stop);
+}
+#endif
 static int do_sort(Elf_Ehdr *ehdr,
 		   char const *const fname,
 		   table_sort_t custom_sort)
@@ -217,6 +281,12 @@ static int do_sort(Elf_Ehdr *ehdr,
 	int idx;
 	unsigned int shnum;
 	unsigned int shstrndx;
+#ifdef MCOUNT_SORT_ENABLED
+	struct elf_mcount_loc mstruct;
+	uint_t _start_mcount_loc = 0;
+	uint_t _stop_mcount_loc = 0;
+	pthread_t mcount_sort_thread;
+#endif
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 	unsigned int orc_ip_size = 0;
 	unsigned int orc_size = 0;
@@ -253,6 +323,17 @@ static int do_sort(Elf_Ehdr *ehdr,
 			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
 						      _r(&s->sh_offset));
 
+#ifdef MCOUNT_SORT_ENABLED
+		/* locate the .init.data section in vmlinux */
+		if (!strcmp(secstrings + idx, ".init.data")) {
+			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
+			mstruct.ehdr = ehdr;
+			mstruct.init_data_sec = s;
+			mstruct.start_mcount_loc = _start_mcount_loc;
+			mstruct.stop_mcount_loc = _stop_mcount_loc;
+		}
+#endif
+
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 		/* locate the ORC unwind tables */
 		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
@@ -294,6 +375,23 @@ static int do_sort(Elf_Ehdr *ehdr,
 		goto out;
 	}
 #endif
+
+#ifdef MCOUNT_SORT_ENABLED
+	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
+		fprintf(stderr,
+			"incomplete mcount's sort in file: %s\n",
+			fname);
+		goto out;
+	}
+
+	/* create thread to sort mcount_loc concurrently */
+	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
+		fprintf(stderr,
+			"pthread_create mcount_sort_thread failed '%s': %s\n",
+			strerror(errno), fname);
+		goto out;
+	}
+#endif
 	if (!extab_sec) {
 		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
 		goto out;
@@ -376,5 +474,23 @@ static int do_sort(Elf_Ehdr *ehdr,
 		}
 	}
 #endif
+
+#ifdef MCOUNT_SORT_ENABLED
+	if (mcount_sort_thread) {
+		void *retval = NULL;
+		/* wait for mcount sort done */
+		rc = pthread_join(mcount_sort_thread, &retval);
+		if (rc) {
+			fprintf(stderr,
+				"pthread_join failed '%s': %s\n",
+				strerror(errno), fname);
+		} else if (retval) {
+			rc = -1;
+			fprintf(stderr,
+				"failed to sort mcount '%s': %s\n",
+				(char *)retval, fname);
+		}
+	}
+#endif
 	return rc;
 }
-- 
2.27.0

Re: [PATCH v7 1/2] scripts: ftrace - move the sort-processing in ftrace_init

[Steven Rostedt]

[-- Attachment #1: Type: text/plain, Size: 2755 bytes --]

On Tue,  7 Dec 2021 23:13:46 +0800
Yinan Liu <yinan@linux.alibaba.com> wrote:

> When the kernel starts, the initialization of ftrace takes
> up a portion of the time (approximately 6~8ms) to sort mcount
> addresses. We can save this time by moving mcount-sorting to
> compile time.
> 
> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> Reported-by: kernel test robot <lkp@intel.com>
> Reported-by: kernel test robot <oliver.sang@intel.com>
> ---
>  kernel/trace/ftrace.c   |  11 +++-
>  scripts/Makefile        |   6 +-
>  scripts/link-vmlinux.sh |   6 +-
>  scripts/sorttable.c     |   2 +
>  scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
>  5 files changed, 137 insertions(+), 8 deletions(-)
> 
> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index 30bc880c3849..9ca63df6553a 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -6406,8 +6406,15 @@ static int ftrace_process_locs(struct module *mod,
>  	if (!count)
>  		return 0;
>  
> -	sort(start, count, sizeof(*start),
> -	     ftrace_cmp_ips, NULL);
> +	/*
> +	 * Sorting mcount in vmlinux at build time depend on
> +	 * CONFIG_BUILDTIME_TABLE_SORT, while mcount loc in
> +	 * modules can not be sorted at build time.
> +	 */
> +	if (!IS_ENABLED(CONFIG_BUILDTIME_TABLE_SORT) || mod) {
> +		sort(start, count, sizeof(*start),
> +		     ftrace_cmp_ips, NULL);
> +	}
>  
>  	start_pg = ftrace_allocate_pages(count);
>  	if (!start_pg)
> diff --git a/scripts/Makefile b/scripts/Makefile
> index 9adb6d247818..d27503469f4b 100644
> --- a/scripts/Makefile
> +++ b/scripts/Makefile
> @@ -17,6 +17,7 @@ hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
>  hostprogs-always-$(CONFIG_SYSTEM_REVOCATION_LIST)	+= extract-cert
>  
>  HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
> +HOSTLDLIBS_sorttable = -lpthread
>  HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
>  HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
>  HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
> @@ -29,7 +30,10 @@ ARCH := x86
>  endif
>  HOSTCFLAGS_sorttable.o += -I$(srctree)/tools/arch/x86/include
>  HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
> -HOSTLDLIBS_sorttable = -lpthread
> +endif
> +
> +ifdef CONFIG_FUNCTION_TRACER
> +HOSTCFLAGS_sorttable.o += -DMCOUNT_SORT_ENABLED
>  endif
>

I dropped this patch again (note I pulled in patch 2, so you do not
need to resend it). The attached config fails to build. The reason is
that you need to test for CONFIG_DYNAMIC_FTRACE and not
CONFIG_FUNCTION_TRACER.  The function tracer can be statically enabled,
which means all the functions just call "mcount" (or whatever), and
they are never patched. This means that the mcount location is not
created.

Just resend a v8 of this patch. Thanks!

-- Steve

[-- Attachment #2: config-fail.gz --]
[-- Type: application/gzip, Size: 30299 bytes --]

[PATCH v7 2/2] script/sorttable: code style improvements

[Yinan Liu]

Modified the code style issue of if() {},
keep the code style consistent.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
---
 scripts/sorttable.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index d1fbee1f81ef..1e8b77928fa4 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -462,11 +462,11 @@ static int do_sort(Elf_Ehdr *ehdr,
 		void *retval = NULL;
 		/* wait for ORC tables sort done */
 		rc = pthread_join(orc_sort_thread, &retval);
-		if (rc)
+		if (rc) {
 			fprintf(stderr,
 				"pthread_join failed '%s': %s\n",
 				strerror(errno), fname);
-		else if (retval) {
+		} else if (retval) {
 			rc = -1;
 			fprintf(stderr,
 				"failed to sort ORC tables '%s': %s\n",
-- 
2.27.0

[PATCH v8 0/1] change log

[Yinan Liu]

Hi, steven

The config check of mcount_sort_enabled have been change 
from CONFIG_FUNCTION_TRACER to CONFIG_DYNAMIC_FTRACE.
The patch now can applies to situation that the function 
tracer be statically enabled. 


Best regards!
-- Yinan Liu 

Yinan Liu (1):
  scripts: ftrace - move the sort-processing in ftrace_init

 kernel/trace/ftrace.c   |  11 +++-
 scripts/Makefile        |   6 +-
 scripts/link-vmlinux.sh |   6 +-
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
 5 files changed, 137 insertions(+), 8 deletions(-)

-- 
2.27.0

[PATCH v8] scripts: ftrace - move the sort-processing in ftrace_init

[Yinan Liu]

When the kernel starts, the initialization of ftrace takes
up a portion of the time (approximately 6~8ms) to sort mcount
addresses. We can save this time by moving mcount-sorting to
compile time.

Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
---
 kernel/trace/ftrace.c   |  11 +++-
 scripts/Makefile        |   6 +-
 scripts/link-vmlinux.sh |   6 +-
 scripts/sorttable.c     |   2 +
 scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
 5 files changed, 137 insertions(+), 8 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index be5f6b32a012..d5751a96213b 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6412,8 +6412,15 @@ static int ftrace_process_locs(struct module *mod,
 	if (!count)
 		return 0;
 
-	sort(start, count, sizeof(*start),
-	     ftrace_cmp_ips, NULL);
+	/*
+	 * Sorting mcount in vmlinux at build time depend on
+	 * CONFIG_BUILDTIME_TABLE_SORT, while mcount loc in
+	 * modules can not be sorted at build time.
+	 */
+	if (!IS_ENABLED(CONFIG_BUILDTIME_TABLE_SORT) || mod) {
+		sort(start, count, sizeof(*start),
+		     ftrace_cmp_ips, NULL);
+	}
 
 	start_pg = ftrace_allocate_pages(count);
 	if (!start_pg)
diff --git a/scripts/Makefile b/scripts/Makefile
index 9adb6d247818..b082d2f93357 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -17,6 +17,7 @@ hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
 hostprogs-always-$(CONFIG_SYSTEM_REVOCATION_LIST)	+= extract-cert
 
 HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
+HOSTLDLIBS_sorttable = -lpthread
 HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
 HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
 HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
@@ -29,7 +30,10 @@ ARCH := x86
 endif
 HOSTCFLAGS_sorttable.o += -I$(srctree)/tools/arch/x86/include
 HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
-HOSTLDLIBS_sorttable = -lpthread
+endif
+
+ifdef CONFIG_DYNAMIC_FTRACE
+HOSTCFLAGS_sorttable.o += -DMCOUNT_SORT_ENABLED
 endif
 
 # The following programs are only built on demand
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 5cdd9bc5c385..dd9955f45774 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -400,6 +400,9 @@ if [ -n "${CONFIG_DEBUG_INFO_BTF}" -a -n "${CONFIG_BPF}" ]; then
 	${RESOLVE_BTFIDS} vmlinux
 fi
 
+info SYSMAP System.map
+mksysmap vmlinux System.map
+
 if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	info SORTTAB vmlinux
 	if ! sorttable vmlinux; then
@@ -408,9 +411,6 @@ if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
 	fi
 fi
 
-info SYSMAP System.map
-mksysmap vmlinux System.map
-
 # step a (see comment above)
 if [ -n "${CONFIG_KALLSYMS}" ]; then
 	mksysmap ${kallsyms_vmlinux} .tmp_System.map
diff --git a/scripts/sorttable.c b/scripts/sorttable.c
index b7c2ad71f9cf..70bdc787ddfb 100644
--- a/scripts/sorttable.c
+++ b/scripts/sorttable.c
@@ -30,6 +30,8 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
 
 #include <tools/be_byteshift.h>
 #include <tools/le_byteshift.h>
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2fefb13..d1fbee1f81ef 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -19,6 +19,9 @@
 
 #undef extable_ent_size
 #undef compare_extable
+#undef get_mcount_loc
+#undef sort_mcount_loc
+#undef elf_mcount_loc
 #undef do_sort
 #undef Elf_Addr
 #undef Elf_Ehdr
@@ -41,6 +44,9 @@
 #ifdef SORTTABLE_64
 # define extable_ent_size	16
 # define compare_extable	compare_extable_64
+# define get_mcount_loc		get_mcount_loc_64
+# define sort_mcount_loc	sort_mcount_loc_64
+# define elf_mcount_loc		elf_mcount_loc_64
 # define do_sort		do_sort_64
 # define Elf_Addr		Elf64_Addr
 # define Elf_Ehdr		Elf64_Ehdr
@@ -62,6 +68,9 @@
 #else
 # define extable_ent_size	8
 # define compare_extable	compare_extable_32
+# define get_mcount_loc		get_mcount_loc_32
+# define sort_mcount_loc	sort_mcount_loc_32
+# define elf_mcount_loc		elf_mcount_loc_32
 # define do_sort		do_sort_32
 # define Elf_Addr		Elf32_Addr
 # define Elf_Ehdr		Elf32_Ehdr
@@ -84,8 +93,6 @@
 
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 /* ORC unwinder only support X86_64 */
-#include <errno.h>
-#include <pthread.h>
 #include <asm/orc_types.h>
 
 #define ERRSTR_MAXSZ	256
@@ -191,7 +198,64 @@ static int compare_extable(const void *a, const void *b)
 		return 1;
 	return 0;
 }
+#ifdef MCOUNT_SORT_ENABLED
+struct elf_mcount_loc {
+	Elf_Ehdr *ehdr;
+	Elf_Shdr *init_data_sec;
+	uint_t start_mcount_loc;
+	uint_t stop_mcount_loc;
+};
+
+/* Sort the addresses stored between __start_mcount_loc to __stop_mcount_loc in vmlinux */
+static void *sort_mcount_loc(void *arg)
+{
+	struct elf_mcount_loc *emloc = (struct elf_mcount_loc *)arg;
+	uint_t offset = emloc->start_mcount_loc - _r(&(emloc->init_data_sec)->sh_addr)
+					+ _r(&(emloc->init_data_sec)->sh_offset);
+	uint_t count = emloc->stop_mcount_loc - emloc->start_mcount_loc;
+	unsigned char *start_loc = (void *)emloc->ehdr + offset;
+
+	qsort(start_loc, count/sizeof(uint_t), sizeof(uint_t), compare_extable);
+	return NULL;
+}
+
+/* Get the address of __start_mcount_loc and __stop_mcount_loc in System.map */
+static void get_mcount_loc(uint_t *_start, uint_t *_stop)
+{
+	FILE *file_start, *file_stop;
+	char start_buff[20];
+	char stop_buff[20];
+	int len = 0;
+
+	file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_start) {
+		fprintf(stderr, "get start_mcount_loc error!");
+		return;
+	}
+
+	file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
+	if (!file_stop) {
+		fprintf(stderr, "get stop_mcount_loc error!");
+		pclose(file_start);
+		return;
+	}
+
+	while (fgets(start_buff, sizeof(start_buff), file_start) != NULL) {
+		len = strlen(start_buff);
+		start_buff[len - 1] = '\0';
+	}
+	*_start = strtoul(start_buff, NULL, 16);
+
+	while (fgets(stop_buff, sizeof(stop_buff), file_stop) != NULL) {
+		len = strlen(stop_buff);
+		stop_buff[len - 1] = '\0';
+	}
+	*_stop = strtoul(stop_buff, NULL, 16);
 
+	pclose(file_start);
+	pclose(file_stop);
+}
+#endif
 static int do_sort(Elf_Ehdr *ehdr,
 		   char const *const fname,
 		   table_sort_t custom_sort)
@@ -217,6 +281,12 @@ static int do_sort(Elf_Ehdr *ehdr,
 	int idx;
 	unsigned int shnum;
 	unsigned int shstrndx;
+#ifdef MCOUNT_SORT_ENABLED
+	struct elf_mcount_loc mstruct;
+	uint_t _start_mcount_loc = 0;
+	uint_t _stop_mcount_loc = 0;
+	pthread_t mcount_sort_thread;
+#endif
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 	unsigned int orc_ip_size = 0;
 	unsigned int orc_size = 0;
@@ -253,6 +323,17 @@ static int do_sort(Elf_Ehdr *ehdr,
 			symtab_shndx = (Elf32_Word *)((const char *)ehdr +
 						      _r(&s->sh_offset));
 
+#ifdef MCOUNT_SORT_ENABLED
+		/* locate the .init.data section in vmlinux */
+		if (!strcmp(secstrings + idx, ".init.data")) {
+			get_mcount_loc(&_start_mcount_loc, &_stop_mcount_loc);
+			mstruct.ehdr = ehdr;
+			mstruct.init_data_sec = s;
+			mstruct.start_mcount_loc = _start_mcount_loc;
+			mstruct.stop_mcount_loc = _stop_mcount_loc;
+		}
+#endif
+
 #if defined(SORTTABLE_64) && defined(UNWINDER_ORC_ENABLED)
 		/* locate the ORC unwind tables */
 		if (!strcmp(secstrings + idx, ".orc_unwind_ip")) {
@@ -294,6 +375,23 @@ static int do_sort(Elf_Ehdr *ehdr,
 		goto out;
 	}
 #endif
+
+#ifdef MCOUNT_SORT_ENABLED
+	if (!mstruct.init_data_sec || !_start_mcount_loc || !_stop_mcount_loc) {
+		fprintf(stderr,
+			"incomplete mcount's sort in file: %s\n",
+			fname);
+		goto out;
+	}
+
+	/* create thread to sort mcount_loc concurrently */
+	if (pthread_create(&mcount_sort_thread, NULL, &sort_mcount_loc, &mstruct)) {
+		fprintf(stderr,
+			"pthread_create mcount_sort_thread failed '%s': %s\n",
+			strerror(errno), fname);
+		goto out;
+	}
+#endif
 	if (!extab_sec) {
 		fprintf(stderr,	"no __ex_table in file: %s\n", fname);
 		goto out;
@@ -376,5 +474,23 @@ static int do_sort(Elf_Ehdr *ehdr,
 		}
 	}
 #endif
+
+#ifdef MCOUNT_SORT_ENABLED
+	if (mcount_sort_thread) {
+		void *retval = NULL;
+		/* wait for mcount sort done */
+		rc = pthread_join(mcount_sort_thread, &retval);
+		if (rc) {
+			fprintf(stderr,
+				"pthread_join failed '%s': %s\n",
+				strerror(errno), fname);
+		} else if (retval) {
+			rc = -1;
+			fprintf(stderr,
+				"failed to sort mcount '%s': %s\n",
+				(char *)retval, fname);
+		}
+	}
+#endif
 	return rc;
 }
-- 
2.27.0

Re: [PATCH v8] scripts: ftrace - move the sort-processing in ftrace_init

[Sven Schnelle]

Hi Yinan,

Yinan Liu <yinan@linux.alibaba.com> writes:

> When the kernel starts, the initialization of ftrace takes
> up a portion of the time (approximately 6~8ms) to sort mcount
> addresses. We can save this time by moving mcount-sorting to
> compile time.
>
> Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> Reported-by: kernel test robot <lkp@intel.com>
> Reported-by: kernel test robot <oliver.sang@intel.com>
> ---
>  kernel/trace/ftrace.c   |  11 +++-
>  scripts/Makefile        |   6 +-
>  scripts/link-vmlinux.sh |   6 +-
>  scripts/sorttable.c     |   2 +
>  scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
>  5 files changed, 137 insertions(+), 8 deletions(-)

while i like the idea, this unfortunately breaks ftrace on s390. The
reason for that is that the compiler generates relocation entries for
all the addresses in __mcount_loc. During boot, the s390 decompressor
iterates through all the relocations and overwrites the nicely
sorted list between __start_mcount_loc and __stop_mcount_loc with
the unsorted list because the relocations entries are not adjusted.

Of course we could just disable that option, but that would make us
different compared to x86 which i don't like. Adding code to sort the
relocation would of course also fix that, but i don't think it is a good
idea to rely on the order of relocations.

Any thoughts how a fix could look like, and whether that could also be a
problem on other architectures?

Thanks
Sven

Re: [PATCH v8] scripts: ftrace - move the sort-processing in ftrace_init

[Heiko Carstens]

On Fri, Jan 21, 2022 at 10:46:36AM +0100, Sven Schnelle wrote:
> Hi Yinan,
> 
> Yinan Liu <yinan@linux.alibaba.com> writes:
> 
> > When the kernel starts, the initialization of ftrace takes
> > up a portion of the time (approximately 6~8ms) to sort mcount
> > addresses. We can save this time by moving mcount-sorting to
> > compile time.
> >
> > Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
> > Reported-by: kernel test robot <lkp@intel.com>
> > Reported-by: kernel test robot <oliver.sang@intel.com>
> > ---
> >  kernel/trace/ftrace.c   |  11 +++-
> >  scripts/Makefile        |   6 +-
> >  scripts/link-vmlinux.sh |   6 +-
> >  scripts/sorttable.c     |   2 +
> >  scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
> >  5 files changed, 137 insertions(+), 8 deletions(-)
> 
> while i like the idea, this unfortunately breaks ftrace on s390. The
> reason for that is that the compiler generates relocation entries for
> all the addresses in __mcount_loc. During boot, the s390 decompressor
> iterates through all the relocations and overwrites the nicely
> sorted list between __start_mcount_loc and __stop_mcount_loc with
> the unsorted list because the relocations entries are not adjusted.
> 
> Of course we could just disable that option, but that would make us
> different compared to x86 which i don't like. Adding code to sort the
> relocation would of course also fix that, but i don't think it is a good
> idea to rely on the order of relocations.
> 
> Any thoughts how a fix could look like, and whether that could also be a
> problem on other architectures?

Sven, thanks for figuring this out. Can you confirm that reverting
commit 72b3942a173c ("scripts: ftrace - move the sort-processing in
ftrace_init") fixes the problem?

This really should be addressed before rc1 is out, otherwise s390 is
broken if somebody enables ftrace.
Where "broken" translates to random crashes as soon as ftrace is
enabled, which again is nowadays quite common.

Re: [PATCH v8] scripts: ftrace - move the sort-processing in ftrace_init

[Sven Schnelle]

Heiko Carstens <hca@linux.ibm.com> writes:

> On Fri, Jan 21, 2022 at 10:46:36AM +0100, Sven Schnelle wrote:
>> Hi Yinan,
>> 
>> Yinan Liu <yinan@linux.alibaba.com> writes:
>> 
>> > When the kernel starts, the initialization of ftrace takes
>> > up a portion of the time (approximately 6~8ms) to sort mcount
>> > addresses. We can save this time by moving mcount-sorting to
>> > compile time.
>> >
>> > Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
>> > Reported-by: kernel test robot <lkp@intel.com>
>> > Reported-by: kernel test robot <oliver.sang@intel.com>
>> > ---
>> >  kernel/trace/ftrace.c   |  11 +++-
>> >  scripts/Makefile        |   6 +-
>> >  scripts/link-vmlinux.sh |   6 +-
>> >  scripts/sorttable.c     |   2 +
>> >  scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
>> >  5 files changed, 137 insertions(+), 8 deletions(-)
>> 
>> while i like the idea, this unfortunately breaks ftrace on s390. The
>> reason for that is that the compiler generates relocation entries for
>> all the addresses in __mcount_loc. During boot, the s390 decompressor
>> iterates through all the relocations and overwrites the nicely
>> sorted list between __start_mcount_loc and __stop_mcount_loc with
>> the unsorted list because the relocations entries are not adjusted.
>> 
>> Of course we could just disable that option, but that would make us
>> different compared to x86 which i don't like. Adding code to sort the
>> relocation would of course also fix that, but i don't think it is a good
>> idea to rely on the order of relocations.
>> 
>> Any thoughts how a fix could look like, and whether that could also be a
>> problem on other architectures?
>
> Sven, thanks for figuring this out. Can you confirm that reverting
> commit 72b3942a173c ("scripts: ftrace - move the sort-processing in
> ftrace_init") fixes the problem?

Yes, reverting this commit fixes it.

> This really should be addressed before rc1 is out, otherwise s390 is
> broken if somebody enables ftrace.
> Where "broken" translates to random crashes as soon as ftrace is
> enabled, which again is nowadays quite common.

I wasn't able to reproduce these crashes on my systems so far. For the
readers here, we're seeing about 10-15 systems crashing every night,
usually in the 00basic/ ftrace testcases.

In most of the case it looks like register corruption, where some random
register is or'd or parts are overwritten with 0x0004000000000000,
sometimes 0x00f4000000000000. I haven't found yts found a commit that
might cause this.

/Sven

Re: [PATCH v8] scripts: ftrace - move the sort-processing in ftrace_init

[Sven Schnelle]

Sven Schnelle <svens@linux.ibm.com> writes:

> Heiko Carstens <hca@linux.ibm.com> writes:
>
>> On Fri, Jan 21, 2022 at 10:46:36AM +0100, Sven Schnelle wrote:
>>> Hi Yinan,
>>> 
>>> Yinan Liu <yinan@linux.alibaba.com> writes:
>>> 
>>> > When the kernel starts, the initialization of ftrace takes
>>> > up a portion of the time (approximately 6~8ms) to sort mcount
>>> > addresses. We can save this time by moving mcount-sorting to
>>> > compile time.
>>> >
>>> > Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
>>> > Reported-by: kernel test robot <lkp@intel.com>
>>> > Reported-by: kernel test robot <oliver.sang@intel.com>
>>> > ---
>>> >  kernel/trace/ftrace.c   |  11 +++-
>>> >  scripts/Makefile        |   6 +-
>>> >  scripts/link-vmlinux.sh |   6 +-
>>> >  scripts/sorttable.c     |   2 +
>>> >  scripts/sorttable.h     | 120 +++++++++++++++++++++++++++++++++++++++-
>>> >  5 files changed, 137 insertions(+), 8 deletions(-)
>>> 
>>> while i like the idea, this unfortunately breaks ftrace on s390. The
>>> reason for that is that the compiler generates relocation entries for
>>> all the addresses in __mcount_loc. During boot, the s390 decompressor
>>> iterates through all the relocations and overwrites the nicely
>>> sorted list between __start_mcount_loc and __stop_mcount_loc with
>>> the unsorted list because the relocations entries are not adjusted.
>>> 
>>> Of course we could just disable that option, but that would make us
>>> different compared to x86 which i don't like. Adding code to sort the
>>> relocation would of course also fix that, but i don't think it is a good
>>> idea to rely on the order of relocations.
>>> 
>>> Any thoughts how a fix could look like, and whether that could also be a
>>> problem on other architectures?
>>
>> Sven, thanks for figuring this out. Can you confirm that reverting
>> commit 72b3942a173c ("scripts: ftrace - move the sort-processing in
>> ftrace_init") fixes the problem?
>
> Yes, reverting this commit fixes it.
>
>> This really should be addressed before rc1 is out, otherwise s390 is
>> broken if somebody enables ftrace.
>> Where "broken" translates to random crashes as soon as ftrace is
>> enabled, which again is nowadays quite common.
>
> I wasn't able to reproduce these crashes on my systems so far. For the
> readers here, we're seeing about 10-15 systems crashing every night,
> usually in the 00basic/ ftrace testcases.
>
> In most of the case it looks like register corruption, where some random
> register is or'd or parts are overwritten with 0x0004000000000000,
> sometimes 0x00f4000000000000. I haven't found yts found a commit that
> might cause this.

Thinking of it, 04 and f4 are exactly the bytes we're patching in our brcl
instructions right at the beginning of the function. So i guess that
because of this bug the ftrace code now writes those bytes to the wrong
location, sometimes hitting the register save area. I haven't verified
that, but i think there's a high likelyhood.

/Sven

Re: [PATCH v8] scripts: ftrace - move the sort-processing in ftrace_init

[Steven Rostedt]

On Fri, 21 Jan 2022 11:42:28 +0100
Heiko Carstens <hca@linux.ibm.com> wrote:

> This really should be addressed before rc1 is out, otherwise s390 is
> broken if somebody enables ftrace.
> Where "broken" translates to random crashes as soon as ftrace is
> enabled, which again is nowadays quite common.

Instead of reverting, should we just add this patch?

-- Steve

diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index f468767bc287..752ed89a293b 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -70,6 +70,13 @@ config HAVE_C_RECORDMCOUNT
 	help
 	  C version of recordmcount available?
 
+config BUILDTIME_MCOUNT_SORT
+       bool
+       default y
+       depends on BUILDTIME_TABLE_SORT && !S390
+       help
+         Sort the mcount_loc section at build time.
+
 config TRACER_MAX_TRACE
 	bool
 
@@ -918,7 +925,7 @@ config EVENT_TRACE_TEST_SYSCALLS
 config FTRACE_SORT_STARTUP_TEST
        bool "Verify compile time sorting of ftrace functions"
        depends on DYNAMIC_FTRACE
-       depends on BUILDTIME_TABLE_SORT
+       depends on BUILDTIME_MCOUNT_SORT
        help
 	 Sorting of the mcount_loc sections that is used to find the
 	 where the ftrace knows where to patch functions for tracing
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 403e485bf091..b01e1fa62193 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6429,10 +6429,10 @@ static int ftrace_process_locs(struct module *mod,
 
 	/*
 	 * Sorting mcount in vmlinux at build time depend on
-	 * CONFIG_BUILDTIME_TABLE_SORT, while mcount loc in
+	 * CONFIG_BUILDTIME_MCOUNT_SORT, while mcount loc in
 	 * modules can not be sorted at build time.
 	 */
-	if (!IS_ENABLED(CONFIG_BUILDTIME_TABLE_SORT) || mod) {
+	if (!IS_ENABLED(CONFIG_BUILDTIME_MCOUNT_SORT) || mod) {
 		sort(start, count, sizeof(*start),
 		     ftrace_cmp_ips, NULL);
 	} else {

Re: [PATCH v8] scripts: ftrace - move the sort-processing in ftrace_init

[Heiko Carstens]

On Fri, Jan 21, 2022 at 01:11:48PM -0500, Steven Rostedt wrote:
> On Fri, 21 Jan 2022 11:42:28 +0100
> Heiko Carstens <hca@linux.ibm.com> wrote:
> 
> > This really should be addressed before rc1 is out, otherwise s390 is
> > broken if somebody enables ftrace.
> > Where "broken" translates to random crashes as soon as ftrace is
> > enabled, which again is nowadays quite common.
> 
> Instead of reverting, should we just add this patch?

That would work as well.

Tested-by: Heiko Carstens <hca@linux.ibm.com>