[RFC patch 0/5] Support BCLK input clock in tlv320aic31xx

[RFC patch 0/5] Support BCLK input clock in tlv320aic31xx

[Ariel D'Alessandro]

The tlv320aic31xx codec allows using BCLK as the input clock for PLL,
deriving all the frequencies through a set of divisors.

In this case, codec sysclk is determined by the hwparams sample
rate/format. So its frequency must be updated from the codec itself when
these are changed.

This patchset modifies the tlv320aic31xx driver to update its sysclk if
BCLK is used as the input clock. This allows to be used by the generic
fsl-asoc-card, without having to add a specific driver.

Ariel D'Alessandro (5):
  ASoC: tlv320aic31xx: Fix typo in BCLK clock name
  ASoC: tlv320aic31xx: Add support for pll_r coefficient
  ASoC: tlv320aic31xx: Add divs for bclk as clk_in
  ASoC: tlv320aic31xx: Handle BCLK set as PLL input configuration
  ASoC: fsl-asoc-card: Support fsl,imx-audio-tlv320aic31xx codec

 sound/soc/codecs/tlv320aic31xx.c | 105 ++++++++++++++++++++-----------
 sound/soc/codecs/tlv320aic31xx.h |   2 +-
 sound/soc/fsl/fsl-asoc-card.c    |  12 ++++
 3 files changed, 83 insertions(+), 36 deletions(-)

-- 
2.30.2

[RFC patch 1/5] ASoC: tlv320aic31xx: Fix typo in BCLK clock name

[Ariel D'Alessandro]

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 sound/soc/codecs/tlv320aic31xx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tlv320aic31xx.h b/sound/soc/codecs/tlv320aic31xx.h
index 2513922a0292..80d062578fb5 100644
--- a/sound/soc/codecs/tlv320aic31xx.h
+++ b/sound/soc/codecs/tlv320aic31xx.h
@@ -118,7 +118,7 @@ struct aic31xx_pdata {
 #define AIC31XX_PLL_CLKIN_MASK		GENMASK(3, 2)
 #define AIC31XX_PLL_CLKIN_SHIFT		(2)
 #define AIC31XX_PLL_CLKIN_MCLK		0x00
-#define AIC31XX_PLL_CLKIN_BCKL		0x01
+#define AIC31XX_PLL_CLKIN_BCLK		0x01
 #define AIC31XX_PLL_CLKIN_GPIO1		0x02
 #define AIC31XX_PLL_CLKIN_DIN		0x03
 #define AIC31XX_CODEC_CLKIN_MASK	GENMASK(1, 0)
-- 
2.30.2

[RFC patch 2/5] ASoC: tlv320aic31xx: Add support for pll_r coefficient

[Ariel D'Alessandro]

When the clock used by the codec is BCLK, the operation parameters need
to be calculated from input sample rate and format. Low frequency rates
required different r multipliers, in order to achieve a higher PLL
output frequency.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 sound/soc/codecs/tlv320aic31xx.c | 71 ++++++++++++++++----------------
 1 file changed, 36 insertions(+), 35 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index 52d2c968b5c0..1aec03d834d0 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -180,6 +180,7 @@ struct aic31xx_priv {
 struct aic31xx_rate_divs {
 	u32 mclk_p;
 	u32 rate;
+	u8 pll_r;
 	u8 pll_j;
 	u16 pll_d;
 	u16 dosr;
@@ -192,51 +193,51 @@ struct aic31xx_rate_divs {
 
 /* ADC dividers can be disabled by configuring them to 0 */
 static const struct aic31xx_rate_divs aic31xx_divs[] = {
-	/* mclk/p    rate  pll: j     d        dosr ndac mdac  aors nadc madc */
+	/* mclk/p    rate  pll: r  j     d     dosr ndac mdac  aors nadc madc */
 	/* 8k rate */
-	{12000000,   8000,	8, 1920,	128,  48,  2,	128,  48,  2},
-	{12000000,   8000,	8, 1920,	128,  32,  3,	128,  32,  3},
-	{12500000,   8000,	7, 8643,	128,  48,  2,	128,  48,  2},
+	{12000000,   8000,	1, 8, 1920,	128,  48,  2,	128,  48,  2},
+	{12000000,   8000,	1, 8, 1920,	128,  32,  3,	128,  32,  3},
+	{12500000,   8000,	1, 7, 8643,	128,  48,  2,	128,  48,  2},
 	/* 11.025k rate */
-	{12000000,  11025,	7, 5264,	128,  32,  2,	128,  32,  2},
-	{12000000,  11025,	8, 4672,	128,  24,  3,	128,  24,  3},
-	{12500000,  11025,	7, 2253,	128,  32,  2,	128,  32,  2},
+	{12000000,  11025,	1, 7, 5264,	128,  32,  2,	128,  32,  2},
+	{12000000,  11025,	1, 8, 4672,	128,  24,  3,	128,  24,  3},
+	{12500000,  11025,	1, 7, 2253,	128,  32,  2,	128,  32,  2},
 	/* 16k rate */
-	{12000000,  16000,	8, 1920,	128,  24,  2,	128,  24,  2},
-	{12000000,  16000,	8, 1920,	128,  16,  3,	128,  16,  3},
-	{12500000,  16000,	7, 8643,	128,  24,  2,	128,  24,  2},
+	{12000000,  16000,	1, 8, 1920,	128,  24,  2,	128,  24,  2},
+	{12000000,  16000,	1, 8, 1920,	128,  16,  3,	128,  16,  3},
+	{12500000,  16000,	1, 7, 8643,	128,  24,  2,	128,  24,  2},
 	/* 22.05k rate */
-	{12000000,  22050,	7, 5264,	128,  16,  2,	128,  16,  2},
-	{12000000,  22050,	8, 4672,	128,  12,  3,	128,  12,  3},
-	{12500000,  22050,	7, 2253,	128,  16,  2,	128,  16,  2},
+	{12000000,  22050,	1, 7, 5264,	128,  16,  2,	128,  16,  2},
+	{12000000,  22050,	1, 8, 4672,	128,  12,  3,	128,  12,  3},
+	{12500000,  22050,	1, 7, 2253,	128,  16,  2,	128,  16,  2},
 	/* 32k rate */
-	{12000000,  32000,	8, 1920,	128,  12,  2,	128,  12,  2},
-	{12000000,  32000,	8, 1920,	128,   8,  3,	128,   8,  3},
-	{12500000,  32000,	7, 8643,	128,  12,  2,	128,  12,  2},
+	{12000000,  32000,	1, 8, 1920,	128,  12,  2,	128,  12,  2},
+	{12000000,  32000,	1, 8, 1920,	128,   8,  3,	128,   8,  3},
+	{12500000,  32000,	1, 7, 8643,	128,  12,  2,	128,  12,  2},
 	/* 44.1k rate */
-	{12000000,  44100,	7, 5264,	128,   8,  2,	128,   8,  2},
-	{12000000,  44100,	8, 4672,	128,   6,  3,	128,   6,  3},
-	{12500000,  44100,	7, 2253,	128,   8,  2,	128,   8,  2},
+	{12000000,  44100,	1, 7, 5264,	128,   8,  2,	128,   8,  2},
+	{12000000,  44100,	1, 8, 4672,	128,   6,  3,	128,   6,  3},
+	{12500000,  44100,	1, 7, 2253,	128,   8,  2,	128,   8,  2},
 	/* 48k rate */
-	{12000000,  48000,	8, 1920,	128,   8,  2,	128,   8,  2},
-	{12000000,  48000,	7, 6800,	 96,   5,  4,	 96,   5,  4},
-	{12500000,  48000,	7, 8643,	128,   8,  2,	128,   8,  2},
+	{12000000,  48000,	1, 8, 1920,	128,   8,  2,	128,   8,  2},
+	{12000000,  48000,	1, 7, 6800,	 96,   5,  4,	 96,   5,  4},
+	{12500000,  48000,	1, 7, 8643,	128,   8,  2,	128,   8,  2},
 	/* 88.2k rate */
-	{12000000,  88200,	7, 5264,	 64,   8,  2,	 64,   8,  2},
-	{12000000,  88200,	8, 4672,	 64,   6,  3,	 64,   6,  3},
-	{12500000,  88200,	7, 2253,	 64,   8,  2,	 64,   8,  2},
+	{12000000,  88200,	1, 7, 5264,	 64,   8,  2,	 64,   8,  2},
+	{12000000,  88200,	1, 8, 4672,	 64,   6,  3,	 64,   6,  3},
+	{12500000,  88200,	1, 7, 2253,	 64,   8,  2,	 64,   8,  2},
 	/* 96k rate */
-	{12000000,  96000,	8, 1920,	 64,   8,  2,	 64,   8,  2},
-	{12000000,  96000,	7, 6800,	 48,   5,  4,	 48,   5,  4},
-	{12500000,  96000,	7, 8643,	 64,   8,  2,	 64,   8,  2},
+	{12000000,  96000,	1, 8, 1920,	 64,   8,  2,	 64,   8,  2},
+	{12000000,  96000,	1, 7, 6800,	 48,   5,  4,	 48,   5,  4},
+	{12500000,  96000,	1, 7, 8643,	 64,   8,  2,	 64,   8,  2},
 	/* 176.4k rate */
-	{12000000, 176400,	7, 5264,	 32,   8,  2,	 32,   8,  2},
-	{12000000, 176400,	8, 4672,	 32,   6,  3,	 32,   6,  3},
-	{12500000, 176400,	7, 2253,	 32,   8,  2,	 32,   8,  2},
+	{12000000, 176400,	1, 7, 5264,	 32,   8,  2,	 32,   8,  2},
+	{12000000, 176400,	1, 8, 4672,	 32,   6,  3,	 32,   6,  3},
+	{12500000, 176400,	1, 7, 2253,	 32,   8,  2,	 32,   8,  2},
 	/* 192k rate */
-	{12000000, 192000,	8, 1920,	 32,   8,  2,	 32,   8,  2},
-	{12000000, 192000,	7, 6800,	 24,   5,  4,	 24,   5,  4},
-	{12500000, 192000,	7, 8643,	 32,   8,  2,	 32,   8,  2},
+	{12000000, 192000,	1, 8, 1920,	 32,   8,  2,	 32,   8,  2},
+	{12000000, 192000,	1, 7, 6800,	 24,   5,  4,	 24,   5,  4},
+	{12500000, 192000,	1, 7, 8643,	 32,   8,  2,	 32,   8,  2},
 };
 
 static const char * const ldac_in_text[] = {
@@ -888,7 +889,7 @@ static int aic31xx_setup_pll(struct snd_soc_component *component,
 
 	/* PLL configuration */
 	snd_soc_component_update_bits(component, AIC31XX_PLLPR, AIC31XX_PLL_MASK,
-			    (aic31xx->p_div << 4) | 0x01);
+			    (aic31xx->p_div << 4) | aic31xx_divs[i].pll_r);
 	snd_soc_component_write(component, AIC31XX_PLLJ, aic31xx_divs[i].pll_j);
 
 	snd_soc_component_write(component, AIC31XX_PLLDMSB,
-- 
2.30.2

[RFC patch 3/5] ASoC: tlv320aic31xx: Add divs for bclk as clk_in

[Ariel D'Alessandro]

Add divisors for rates needed when the clk_in is set to BCLK.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 sound/soc/codecs/tlv320aic31xx.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index 1aec03d834d0..e8307f0737f2 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -195,46 +195,66 @@ struct aic31xx_rate_divs {
 static const struct aic31xx_rate_divs aic31xx_divs[] = {
 	/* mclk/p    rate  pll: r  j     d     dosr ndac mdac  aors nadc madc */
 	/* 8k rate */
+	{  512000,   8000,	4, 48,   0,	128,  48,  2,   128,  48,  2},
 	{12000000,   8000,	1, 8, 1920,	128,  48,  2,	128,  48,  2},
 	{12000000,   8000,	1, 8, 1920,	128,  32,  3,	128,  32,  3},
 	{12500000,   8000,	1, 7, 8643,	128,  48,  2,	128,  48,  2},
 	/* 11.025k rate */
+	{  705600,  11025,	3, 48,   0,	128,  24,  3,	128,  24,  3},
 	{12000000,  11025,	1, 7, 5264,	128,  32,  2,	128,  32,  2},
 	{12000000,  11025,	1, 8, 4672,	128,  24,  3,	128,  24,  3},
 	{12500000,  11025,	1, 7, 2253,	128,  32,  2,	128,  32,  2},
 	/* 16k rate */
+	{  512000,  16000,	4, 48,   0,	128,  16,  3,	128,  16,  3},
+	{ 1024000,  16000,	2, 48,   0,	128,  16,  3,	128,  16,  3},
 	{12000000,  16000,	1, 8, 1920,	128,  24,  2,	128,  24,  2},
 	{12000000,  16000,	1, 8, 1920,	128,  16,  3,	128,  16,  3},
 	{12500000,  16000,	1, 7, 8643,	128,  24,  2,	128,  24,  2},
 	/* 22.05k rate */
+	{  705600,  22050,	4, 36,   0,	128,  12,  3,	128,  12,  3},
+	{ 1411200,  22050,	2, 36,   0,	128,  12,  3,	128,  12,  3},
 	{12000000,  22050,	1, 7, 5264,	128,  16,  2,	128,  16,  2},
 	{12000000,  22050,	1, 8, 4672,	128,  12,  3,	128,  12,  3},
 	{12500000,  22050,	1, 7, 2253,	128,  16,  2,	128,  16,  2},
 	/* 32k rate */
+	{ 1024000,  32000,      2, 48,   0,	128,  12,  2,	128,  12,  2},
+	{ 2048000,  32000,      1, 48,   0,	128,  12,  2,	128,  12,  2},
 	{12000000,  32000,	1, 8, 1920,	128,  12,  2,	128,  12,  2},
 	{12000000,  32000,	1, 8, 1920,	128,   8,  3,	128,   8,  3},
 	{12500000,  32000,	1, 7, 8643,	128,  12,  2,	128,  12,  2},
 	/* 44.1k rate */
+	{ 1411200,  44100,	2, 32,   0,	128,   8,  2,	128,   8,  2},
+	{ 2822400,  44100,	1, 32,   0,	128,   8,  2,	128,   8,  2},
 	{12000000,  44100,	1, 7, 5264,	128,   8,  2,	128,   8,  2},
 	{12000000,  44100,	1, 8, 4672,	128,   6,  3,	128,   6,  3},
 	{12500000,  44100,	1, 7, 2253,	128,   8,  2,	128,   8,  2},
 	/* 48k rate */
+	{ 1536000,  48000,	2, 32,   0,	128,   8,  2,	128,   8,  2},
+	{ 3072000,  48000,	1, 32,   0,	128,   8,  2,	128,   8,  2},
 	{12000000,  48000,	1, 8, 1920,	128,   8,  2,	128,   8,  2},
 	{12000000,  48000,	1, 7, 6800,	 96,   5,  4,	 96,   5,  4},
 	{12500000,  48000,	1, 7, 8643,	128,   8,  2,	128,   8,  2},
 	/* 88.2k rate */
+	{ 2822400,  88200,	2, 16,   0,	 64,   8,  2,	 64,   8,  2},
+	{ 5644800,  88200,	1, 16,   0,	 64,   8,  2,	 64,   8,  2},
 	{12000000,  88200,	1, 7, 5264,	 64,   8,  2,	 64,   8,  2},
 	{12000000,  88200,	1, 8, 4672,	 64,   6,  3,	 64,   6,  3},
 	{12500000,  88200,	1, 7, 2253,	 64,   8,  2,	 64,   8,  2},
 	/* 96k rate */
+	{ 3072000,  96000,	2, 16,   0,	 64,   8,  2,	 64,   8,  2},
+	{ 6144000,  96000,	1, 16,   0,	 64,   8,  2,	 64,   8,  2},
 	{12000000,  96000,	1, 8, 1920,	 64,   8,  2,	 64,   8,  2},
 	{12000000,  96000,	1, 7, 6800,	 48,   5,  4,	 48,   5,  4},
 	{12500000,  96000,	1, 7, 8643,	 64,   8,  2,	 64,   8,  2},
 	/* 176.4k rate */
+	{ 5644800, 176400,	2, 8,    0,	 32,   8,  2,	 32,   8,  2},
+	{11289600, 176400,	1, 8,    0,	 32,   8,  2,	 32,   8,  2},
 	{12000000, 176400,	1, 7, 5264,	 32,   8,  2,	 32,   8,  2},
 	{12000000, 176400,	1, 8, 4672,	 32,   6,  3,	 32,   6,  3},
 	{12500000, 176400,	1, 7, 2253,	 32,   8,  2,	 32,   8,  2},
 	/* 192k rate */
+	{ 6144000, 192000,	2, 8,	 0,	 32,   8,  2,	 32,   8,  2},
+	{12288000, 192000,	1, 8,	 0,	 32,   8,  2,	 32,   8,  2},
 	{12000000, 192000,	1, 8, 1920,	 32,   8,  2,	 32,   8,  2},
 	{12000000, 192000,	1, 7, 6800,	 24,   5,  4,	 24,   5,  4},
 	{12500000, 192000,	1, 7, 8643,	 32,   8,  2,	 32,   8,  2},
-- 
2.30.2

[RFC patch 4/5] ASoC: tlv320aic31xx: Handle BCLK set as PLL input configuration

[Ariel D'Alessandro]

If BCLK is used as PLL input, the sysclk is determined by the hw
params. So it must be updated here to match the input frequency, based
on sample rate, format and channels.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
---
 sound/soc/codecs/tlv320aic31xx.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index e8307f0737f2..4224b4b3cae6 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
@@ -169,6 +170,7 @@ struct aic31xx_priv {
 	struct regulator_bulk_data supplies[AIC31XX_NUM_SUPPLIES];
 	struct aic31xx_disable_nb disable_nb[AIC31XX_NUM_SUPPLIES];
 	struct snd_soc_jack *jack;
+	u32 sysclk_id;
 	unsigned int sysclk;
 	u8 p_div;
 	int rate_div_line;
@@ -962,6 +964,7 @@ static int aic31xx_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *dai)
 {
 	struct snd_soc_component *component = dai->component;
+	struct aic31xx_priv *aic31xx = snd_soc_component_get_drvdata(component);
 	u8 data = 0;
 
 	dev_dbg(component->dev, "## %s: width %d rate %d\n",
@@ -993,6 +996,16 @@ static int aic31xx_hw_params(struct snd_pcm_substream *substream,
 			    AIC31XX_IFACE1_DATALEN_MASK,
 			    data);
 
+	/*
+	 * If BCLK is used as PLL input, the sysclk is determined by the hw
+	 * params. So it must be updated here to match the input frequency.
+	 */
+	if (aic31xx->sysclk_id == AIC31XX_PLL_CLKIN_BCLK) {
+		aic31xx->sysclk = params_rate(params) * params_width(params) *
+				  params_channels(params);
+		aic31xx->p_div = 1;
+	}
+
 	return aic31xx_setup_pll(component, params);
 }
 
@@ -1177,6 +1190,7 @@ static int aic31xx_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	snd_soc_component_update_bits(component, AIC31XX_CLKMUX, AIC31XX_PLL_CLKIN_MASK,
 			    clk_id << AIC31XX_PLL_CLKIN_SHIFT);
 
+	aic31xx->sysclk_id = clk_id;
 	aic31xx->sysclk = freq;
 
 	return 0;
-- 
2.30.2

[RFC patch 5/5] ASoC: fsl-asoc-card: Support fsl,imx-audio-tlv320aic31xx codec

[Ariel D'Alessandro]

Add entry for fsl,imx-audio-tlv320aic31xx audio codec. This codec is
configured to use BCLK as clock input.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 sound/soc/fsl/fsl-asoc-card.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 6e6494f9f399..90cbed496f98 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -26,6 +26,7 @@
 #include "../codecs/wm8962.h"
 #include "../codecs/wm8960.h"
 #include "../codecs/wm8994.h"
+#include "../codecs/tlv320aic31xx.h"
 
 #define CS427x_SYSCLK_MCLK 0
 
@@ -629,6 +630,16 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
 	} else if (of_device_is_compatible(np, "fsl,imx-audio-tlv320aic32x4")) {
 		codec_dai_name = "tlv320aic32x4-hifi";
 		priv->dai_fmt |= SND_SOC_DAIFMT_CBP_CFP;
+	} else if (of_device_is_compatible(np, "fsl,imx-audio-tlv320aic31xx")) {
+		codec_dai_name = "tlv320dac31xx-hifi";
+		priv->dai_fmt |= SND_SOC_DAIFMT_CBS_CFS;
+		priv->dai_link[1].dpcm_capture = 0;
+		priv->dai_link[2].dpcm_capture = 0;
+		priv->cpu_priv.sysclk_dir[TX] = SND_SOC_CLOCK_OUT;
+		priv->cpu_priv.sysclk_dir[RX] = SND_SOC_CLOCK_OUT;
+		priv->codec_priv.mclk_id = AIC31XX_PLL_CLKIN_BCLK;
+		priv->card.dapm_routes = audio_map_tx;
+		priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_tx);
 	} else if (of_device_is_compatible(np, "fsl,imx-audio-wm8962")) {
 		codec_dai_name = "wm8962";
 		priv->codec_priv.mclk_id = WM8962_SYSCLK_MCLK;
@@ -888,6 +899,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = {
 	{ .compatible = "fsl,imx-audio-cs42888", },
 	{ .compatible = "fsl,imx-audio-cs427x", },
 	{ .compatible = "fsl,imx-audio-tlv320aic32x4", },
+	{ .compatible = "fsl,imx-audio-tlv320aic31xx", },
 	{ .compatible = "fsl,imx-audio-sgtl5000", },
 	{ .compatible = "fsl,imx-audio-wm8962", },
 	{ .compatible = "fsl,imx-audio-wm8960", },
-- 
2.30.2

Re: [RFC patch 2/5] ASoC: tlv320aic31xx: Add support for pll_r coefficient

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 609 bytes --]

On Fri, Nov 19, 2021 at 12:32:45PM -0300, Ariel D'Alessandro wrote:
> When the clock used by the codec is BCLK, the operation parameters need
> to be calculated from input sample rate and format. Low frequency rates
> required different r multipliers, in order to achieve a higher PLL
> output frequency.
> 
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

Did Michael write this code (in which case there should be a From: from
him) or did he work on the code with you?  The signoffs are a little
confusing.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [RFC patch 2/5] ASoC: tlv320aic31xx: Add support for pll_r coefficient

[Michael Nazzareno Trimarchi]

Hi Mark

On Mon, Nov 22, 2021 at 3:22 PM Mark Brown <broonie@kernel.org> wrote:
>
> On Fri, Nov 19, 2021 at 12:32:45PM -0300, Ariel D'Alessandro wrote:
> > When the clock used by the codec is BCLK, the operation parameters need
> > to be calculated from input sample rate and format. Low frequency rates
> > required different r multipliers, in order to achieve a higher PLL
> > output frequency.
> >
> > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
>
> Did Michael write this code (in which case there should be a From: from
> him) or did he work on the code with you?  The signoffs are a little
> confusing.

It's fine. We are working together

Michael

Re: [RFC patch 2/5] ASoC: tlv320aic31xx: Add support for pll_r coefficient

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 948 bytes --]

On Mon, Nov 22, 2021 at 03:24:42PM +0100, Michael Nazzareno Trimarchi wrote:
> On Mon, Nov 22, 2021 at 3:22 PM Mark Brown <broonie@kernel.org> wrote:
> > On Fri, Nov 19, 2021 at 12:32:45PM -0300, Ariel D'Alessandro wrote:

> > > When the clock used by the codec is BCLK, the operation parameters need
> > > to be calculated from input sample rate and format. Low frequency rates
> > > required different r multipliers, in order to achieve a higher PLL
> > > output frequency.

> > > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > > Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

> > Did Michael write this code (in which case there should be a From: from
> > him) or did he work on the code with you?  The signoffs are a little
> > confusing.

> It's fine. We are working together

In such situations it's best to include a Co-developed-by tag to say
what's going on, that makes it clear what's going on.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [RFC patch 0/5] Support BCLK input clock in tlv320aic31xx

[Mark Brown]

On Fri, 19 Nov 2021 12:32:43 -0300, Ariel D'Alessandro wrote:
> The tlv320aic31xx codec allows using BCLK as the input clock for PLL,
> deriving all the frequencies through a set of divisors.
> 
> In this case, codec sysclk is determined by the hwparams sample
> rate/format. So its frequency must be updated from the codec itself when
> these are changed.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/5] ASoC: tlv320aic31xx: Fix typo in BCLK clock name
      commit: 7016fd940adf2f4d86032339b546c6ecd737062f
[2/5] ASoC: tlv320aic31xx: Add support for pll_r coefficient
      commit: 2664b24a8c51c21b24c2b37b7f10d6485c35b7c1
[3/5] ASoC: tlv320aic31xx: Add divs for bclk as clk_in
      commit: 6e6752a9c78738e27bde6da5cefa393b589276bb
[4/5] ASoC: tlv320aic31xx: Handle BCLK set as PLL input configuration
      commit: c5d22d5e12e776fee4e346dc098fe51d00c2f983
[5/5] ASoC: fsl-asoc-card: Support fsl,imx-audio-tlv320aic31xx codec
      commit: 8c9b9cfb7724685ce705f511b882f30597596536

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [RFC patch 0/5] Support BCLK input clock in tlv320aic31xx

[Ariel D'Alessandro]

Hi Mark,

On 11/22/21 9:00 PM, Mark Brown wrote:
> On Fri, 19 Nov 2021 12:32:43 -0300, Ariel D'Alessandro wrote:
>> The tlv320aic31xx codec allows using BCLK as the input clock for PLL,
>> deriving all the frequencies through a set of divisors.
>>
>> In this case, codec sysclk is determined by the hwparams sample
>> rate/format. So its frequency must be updated from the codec itself when
>> these are changed.
>>
>> [...]
> 
> Applied to
> 
>    https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
> 
> Thanks!
> 
> [1/5] ASoC: tlv320aic31xx: Fix typo in BCLK clock name
>       commit: 7016fd940adf2f4d86032339b546c6ecd737062f
> [2/5] ASoC: tlv320aic31xx: Add support for pll_r coefficient
>       commit: 2664b24a8c51c21b24c2b37b7f10d6485c35b7c1
> [3/5] ASoC: tlv320aic31xx: Add divs for bclk as clk_in
>       commit: 6e6752a9c78738e27bde6da5cefa393b589276bb
> [4/5] ASoC: tlv320aic31xx: Handle BCLK set as PLL input configuration
>       commit: c5d22d5e12e776fee4e346dc098fe51d00c2f983
> [5/5] ASoC: fsl-asoc-card: Support fsl,imx-audio-tlv320aic31xx codec
>       commit: 8c9b9cfb7724685ce705f511b882f30597596536
> 
> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.
> 
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
> 
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.

Quick question:

I gotta send a fix for one of the patches. So, should it be a new
incremental patch or I can still send a patchset v2?

Also, I sent an incremental update patchset on top of this one:

  [PATCH 0/4] fsl-asoc-card: Add optional dt property for setting mclk-id

I could merge altogether on a patchset v2. Please let me know, and sorry
the process it's not clear to me :-)

Thanks,
Ariel

Re: [RFC patch 5/5] ASoC: fsl-asoc-card: Support fsl,imx-audio-tlv320aic31xx codec

[Ariel D'Alessandro]

On 11/19/21 12:32 PM, Ariel D'Alessandro wrote:
> Add entry for fsl,imx-audio-tlv320aic31xx audio codec. This codec is
> configured to use BCLK as clock input.
> 
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  sound/soc/fsl/fsl-asoc-card.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
> index 6e6494f9f399..90cbed496f98 100644
> --- a/sound/soc/fsl/fsl-asoc-card.c
> +++ b/sound/soc/fsl/fsl-asoc-card.c
> @@ -26,6 +26,7 @@
>  #include "../codecs/wm8962.h"
>  #include "../codecs/wm8960.h"
>  #include "../codecs/wm8994.h"
> +#include "../codecs/tlv320aic31xx.h"
>  
>  #define CS427x_SYSCLK_MCLK 0
>  
> @@ -629,6 +630,16 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
>  	} else if (of_device_is_compatible(np, "fsl,imx-audio-tlv320aic32x4")) {
>  		codec_dai_name = "tlv320aic32x4-hifi";
>  		priv->dai_fmt |= SND_SOC_DAIFMT_CBP_CFP;
> +	} else if (of_device_is_compatible(np, "fsl,imx-audio-tlv320aic31xx")) {
> +		codec_dai_name = "tlv320dac31xx-hifi";
> +		priv->dai_fmt |= SND_SOC_DAIFMT_CBS_CFS;
> +		priv->dai_link[1].dpcm_capture = 0;
> +		priv->dai_link[2].dpcm_capture = 0;
> +		priv->cpu_priv.sysclk_dir[TX] = SND_SOC_CLOCK_OUT;
> +		priv->cpu_priv.sysclk_dir[RX] = SND_SOC_CLOCK_OUT;
> +		priv->codec_priv.mclk_id = AIC31XX_PLL_CLKIN_BCLK;
> +		priv->card.dapm_routes = audio_map_tx;
> +		priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_tx);
>  	} else if (of_device_is_compatible(np, "fsl,imx-audio-wm8962")) {
>  		codec_dai_name = "wm8962";
>  		priv->codec_priv.mclk_id = WM8962_SYSCLK_MCLK;
> @@ -888,6 +899,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = {
>  	{ .compatible = "fsl,imx-audio-cs42888", },
>  	{ .compatible = "fsl,imx-audio-cs427x", },
>  	{ .compatible = "fsl,imx-audio-tlv320aic32x4", },
> +	{ .compatible = "fsl,imx-audio-tlv320aic31xx", },
>  	{ .compatible = "fsl,imx-audio-sgtl5000", },
>  	{ .compatible = "fsl,imx-audio-wm8962", },
>  	{ .compatible = "fsl,imx-audio-wm8960", },

The following config is missing and must be added.

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 8e05d092790e..14a06d9418a7 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -312,6 +312,7 @@ config SND_SOC_FSL_ASOC_CARD
        select SND_SOC_FSL_SAI
        select SND_SOC_FSL_SSI
+       select SND_SOC_TLV320AIC31XX
        select SND_SOC_WM8994
        select MFD_WM8994
        help

Regards,
Ariel

Re: [RFC patch 0/5] Support BCLK input clock in tlv320aic31xx

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 427 bytes --]

On Fri, Dec 03, 2021 at 02:25:17PM -0300, Ariel D'Alessandro wrote:
> On 11/22/21 9:00 PM, Mark Brown wrote:

> > If any updates are required or you are submitting further changes they
> > should be sent as incremental updates against current git, existing
> > patches will not be replaced.

> I gotta send a fix for one of the patches. So, should it be a new
> incremental patch or I can still send a patchset v2?

See above.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [RFC patch 0/5] Support BCLK input clock in tlv320aic31xx

[Ariel D'Alessandro]

Hi Mark,

On 12/3/21 2:34 PM, Mark Brown wrote:
> On Fri, Dec 03, 2021 at 02:25:17PM -0300, Ariel D'Alessandro wrote:
>> On 11/22/21 9:00 PM, Mark Brown wrote:
> 
>>> If any updates are required or you are submitting further changes they
>>> should be sent as incremental updates against current git, existing
>>> patches will not be replaced.
> 
>> I gotta send a fix for one of the patches. So, should it be a new
>> incremental patch or I can still send a patchset v2?
> 
> See above.

Got it, thank you for confirming it.