* [PATCH] arm64: dts: imx8mm-beacon: Enable USB Controllers
@ 2021-11-04 12:34 Adam Ford
2021-11-22 0:57 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Adam Ford @ 2021-11-04 12:34 UTC (permalink / raw)
To: linux-arm-kernel
Cc: aford, Adam Ford, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
The i.MX8M Mini has two available USB controllers. On the
imx8mm-beacon board, USB1 is routed to a mini-USB port with
OTG functionality. USB2 is routed to a USB hub which has
three host-only ports connected to it.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index 6f5e63696ec0..4097a66163b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -43,6 +43,17 @@ reg_audio: regulator-audio {
enable-active-high;
};
+ reg_usbotg1: regulator-usbotg1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_otg1>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
regulator-name = "VSD_3V3";
@@ -169,6 +180,24 @@ &uart3 {
status = "okay";
};
+&usbotg1 {
+ vbus-supply = <®_usbotg1>;
+ disable-over-current;
+ dr_mode="otg";
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ disable-over-current;
+ dr_mode="host";
+ status = "okay";
+};
+
+&usbphynop2 {
+ reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+};
+
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -215,6 +244,12 @@ MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19
>;
};
+ pinctrl_reg_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19
+ >;
+ };
+
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
--
2.32.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: imx8mm-beacon: Enable USB Controllers
2021-11-04 12:34 [PATCH] arm64: dts: imx8mm-beacon: Enable USB Controllers Adam Ford
@ 2021-11-22 0:57 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2021-11-22 0:57 UTC (permalink / raw)
To: Adam Ford
Cc: linux-arm-kernel, aford, Rob Herring, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel
On Thu, Nov 04, 2021 at 07:34:11AM -0500, Adam Ford wrote:
> The i.MX8M Mini has two available USB controllers. On the
> imx8mm-beacon board, USB1 is routed to a mini-USB port with
> OTG functionality. USB2 is routed to a USB hub which has
> three host-only ports connected to it.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
Applied, thanks!
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-11-22 0:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-04 12:34 [PATCH] arm64: dts: imx8mm-beacon: Enable USB Controllers Adam Ford
2021-11-22 0:57 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).