From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: "Florian Fainelli" <f.fainelli@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Rafał Miłecki" <rafal@milecki.pl>,
bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM IPROC
GBIT ETHERNET DRIVER), "Doug Berger" <opendmb@gmail.com>,
"Ray Jui" <rjui@broadcom.com>,
"Scott Branden" <sbranden@broadcom.com>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
IPROC ARM ARCHITECTURE)
Subject: [PATCH net-next 5/7] dt-bindings: net: Convert AMAC to YAML
Date: Tue, 30 Nov 2021 20:12:26 -0800 [thread overview]
Message-ID: <20211201041228.32444-6-f.fainelli@gmail.com> (raw)
In-Reply-To: <20211201041228.32444-1-f.fainelli@gmail.com>
Convert the Broadcom AMAC Device Tree binding to YAML to help with
schema and dtbs checking.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../devicetree/bindings/net/brcm,amac.txt | 30 -------
.../devicetree/bindings/net/brcm,amac.yaml | 88 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 89 insertions(+), 31 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/brcm,amac.txt
create mode 100644 Documentation/devicetree/bindings/net/brcm,amac.yaml
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
deleted file mode 100644
index 0120ebe93262..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,amac.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Broadcom AMAC Ethernet Controller Device Tree Bindings
--------------------------------------------------------------
-
-Required properties:
- - compatible: "brcm,amac"
- "brcm,nsp-amac"
- "brcm,ns2-amac"
- - reg: Address and length of the register set for the device. It
- contains the information of registers in the same order as
- described by reg-names
- - reg-names: Names of the registers.
- "amac_base": Address and length of the GMAC registers
- "idm_base": Address and length of the GMAC IDM registers
- (required for NSP and Northstar2)
- "nicpm_base": Address and length of the NIC Port Manager
- registers (required for Northstar2)
- - interrupts: Interrupt number
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Examples:
-
-amac0: ethernet@18022000 {
- compatible = "brcm,nsp-amac";
- reg = <0x18022000 0x1000>,
- <0x18110000 0x1000>;
- reg-names = "amac_base", "idm_base";
- interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml
new file mode 100644
index 000000000000..d9de68aba7d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,amac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AMAC Ethernet Controller Device Tree Bindings
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,amac
+ then:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+ reg-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: amac_base
+ - const: idm_base
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,nsp-amac
+ then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+ reg-names:
+ items:
+ - const: amac_base
+ - const: idm_base
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,ns2-amac
+ then:
+ properties:
+ reg:
+ minItems: 3
+ maxItems: 3
+ reg-names:
+ items:
+ - const: amac_base
+ - const: idm_base
+ - const: nicpm_base
+
+properties:
+ compatible:
+ enum:
+ - brcm,amac
+ - brcm,nsp-amac
+ - brcm,ns2-amac
+
+ interrupts:
+ maxItems: 1
+
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ amac0: ethernet@18022000 {
+ compatible = "brcm,nsp-amac";
+ reg = <0x18022000 0x1000>,
+ <0x18110000 0x1000>;
+ reg-names = "amac_base", "idm_base";
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index eb0f6caf0062..6b32420bd9bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3872,7 +3872,7 @@ M: Rafał Miłecki <rafal@milecki.pl>
M: bcm-kernel-feedback-list@broadcom.com
L: netdev@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/net/brcm,amac.txt
+F: Documentation/devicetree/bindings/net/brcm,amac.yaml
F: drivers/net/ethernet/broadcom/bgmac*
F: drivers/net/ethernet/broadcom/unimac.h
--
2.25.1
next prev parent reply other threads:[~2021-12-01 4:13 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-01 4:12 [PATCH net-next 0/7] Broadcom DT bindings conversion to YAML Florian Fainelli
2021-12-01 4:12 ` [PATCH net-next 1/7] dt-bindings: net: brcm,unimac-mdio: reg-names is optional Florian Fainelli
2021-12-01 4:12 ` [PATCH net-next 2/7] dt-bindings: net: brcm,unimac-mdio: Update maintainers for binding Florian Fainelli
2021-12-01 4:12 ` [PATCH net-next 3/7] dt-bindings: net: Document moca PHY interface Florian Fainelli
2021-12-01 14:33 ` Rob Herring
2021-12-01 17:15 ` Florian Fainelli
2021-12-01 18:28 ` Rob Herring
2021-12-01 4:12 ` [PATCH net-next 4/7] dt-bindings: net: Convert GENET binding to YAML Florian Fainelli
2021-12-01 14:33 ` Rob Herring
2021-12-01 4:12 ` Florian Fainelli [this message]
2021-12-01 4:12 ` [PATCH net-next 6/7] dt-bindings: net: Convert SYSTEMPORT " Florian Fainelli
2021-12-01 14:33 ` Rob Herring
2021-12-01 4:12 ` [PATCH net-next 7/7] dt-bindings: net: Convert iProc MDIO mux " Florian Fainelli
2021-12-01 14:33 ` Rob Herring
2021-12-01 19:06 ` Rob Herring
2021-12-01 19:48 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211201041228.32444-6-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=opendmb@gmail.com \
--cc=rafal@milecki.pl \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).